Concurrent Manager Not Started after RUP7

Hi All,
After applying patch (6241631) 11.ATG_RUP7 concurrent manager showing status as not started in OAM.
The patch Installation completed succesfully with no issues.
All the concurrent managers are running and all application is running fine. Only the issue is with OAM
Thanks in advance for any inputs.

Hi,
Note: 858801.1 - Known Issues On Top of 11i.ATG_PF.H.delta.7 (RUP7) - 6241631Doesn't contains any Information.Save this document for future reference as I expect bugs and.issues to be reported later.
I will try to regenerate all JAR files with force option. For this do we need to bounce web server?Yes.
Regards,
Hussein

Similar Messages

Concurrent Manager not starting after cloning

Hi,
I am not able to start concurrent manager after cloning the CM tier. I am gettiing below error in the manager log file,
Could not initialize the Service Manager FNDSM_<Node name>_<Env>. Verify that <Node Name> has been registered for concurrent processing.
Routine AFPEIM encountered an error while starting concurrent manager RCVOLTM with library /u01/app/hl.../...appl/po/11.5.0/bin/RCVOLTM.
What might be cause of the error?
Thanks,
Prasad

Hi Prasad,
Using normal hostsnames or virtual hostsnames? Also did you experience issues during the dbTier clone (check all log files created even if the cloning did not error out)
Possible the hostsnames in FND_NODES are not cleared properly during the DB clone
Running the following might give a better result:
1 - SQL> EXEC FND_CONC_CLONE.SETUP_CLEAN;
COMMIT;
EXIT;
2 - Run AutoConfig on all tiers, firstly on the DB tier and then the APPS tiers,
3 - check if the concurrent managers are starting.
Regards,
Ronald

Concurrent Manager not starting after patching/ cloning

Hi,
We have an issue where after cloning and/or patching an environment the concurrent manager doesn't start. Our steps to resolve this problem have thus far been as follows:
1. Apply 3830807
2. Run autoconfig
3. Run cmclean.sql on environment
4. Check the libc* files in 8.0.6 ORACLE_HOME/lib/stubs
We had an instance after a patch was applied where the conc mgr did not start and we applied all of the above, in that order. No success. We then decided to apply the 3830807 patch again and run autoconfig- basically re- run steps 1 and 2. Success. In another instance, running the cmclean.sql resolved the error. In some instances, simply shutting down the application and DB and restarting will be enough.
Our problem is that the resolution to this error always seems random. What may work in one instance almost never works in another. Additionally, the problem has started since we've applied ATG RUP 6 to our LIVE environment and our clones. Coincidence?
We have logged an SR but I feel like we're being spun in circles- I'm not getting a direct answer or resolution path from them.
If someone could provide some guidance on a proper resolution path for this conc mgr issue I would very much appreciate it.
Thanks,
Lia.

Basically the approach we're now taking (and that's working) is that after applying a patch, or set of patches, we apply patch 3830807 and then run autoconfig on the db and apps tier. We then shut down the application (if not already down) and the database and then bring everything back up.
Thanks to all for their assistance.
Lia.

Concurrent Manager not started after Clonning - Forms not showing

Hi,
I have cloned PROD system into a TEST system using Rapid Clone.
After I started TEST services, I log into application but OracleForms are not working. When I click on a function which calls a selfservice form, it works well, but when the function calls an Oracle form, the Forms Environment is opened but there is only "Window" menu (which contains "tile", "cascade", etc).
The same situation even when I open directly from http://apptest.rmis:8000/dev60cgi/ifcgi60.exe.
Also Concurrent Manager service is not started. I deleted and recreated it, ran autoconfig, but the problem still persist.
Please help me to solve the issue.
Thank you.

Hi,
I did the relinking of all executables under FND, tried to adsvcm -deinstall (-install) and ran autoconfig successfully, but still CM service is started than stopped.
Here is the CM logfile:
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 15-FEB-2008 16:33:27 -
Shutting down Internal Concurrent Manager : 15-FEB-2008 16:33:27
Reviver is not enabled, not spawning a reviver process.
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPCSQ encountered an ORACLE error. ORA-12222: TNS:no such
protocol adapter
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
Please help to solve this issue.
Thank you.

Concurrent Manager not starting

Platform: "Windows 2003 R2 32-bit"
EBS: "11.5.10.2"
Database: "10.2.0.4"
Just applied patch 6241631 and then successfully completed autoconfig on both database and application. When trying to start the application services concurrent manager service is not being started and giving error:
ECHO is off.
ECHO is off.
Thu 08/18/2011 09:53 AM
ECHO is off.
ECHO is off.
Thu 08/18/2011 09:53 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
Starting concurrent manager for PROD ...
The OracleConcMgrPROD_apps11i service is starting.
adcmctl.cmd exiting with status 2
.end std out.
The OracleConcMgrPROD_apps11i service could not be started.
A system error has occurred.
System error 1067 has occurred.
The process terminated unexpectedly.
.end err out.
The patch completed succesfully but I am wondering why its is behaving abnormally. I have run cmclean.sql and even rebooted the machine but in vain.
Please guide me to get rid out of this.
In the "08180953.log" at the end I see the following report:
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
Oracle Apache Server PROD_apps11i adapcctl.cmd Started
OraclePRODOra806_2TNSListener80APPS_PROD adalnctl.cmd Started
OracleConcMgrPROD_apps11i adcmctl.cmd Started
OracleFormsServer-Forms60PROD_apps11i adfrmctl.cmd Started
OracleReportServer-Rep60_PROD adrepctl.cmd Started
Oracle Metrics Client PROD_apps11i adfmcctl.cmd Started
Oracle Metrics Server PROD_apps11i adfmsctl.cmd Started
Oracle Fulfillment Server PROD_apps11i jtffmctl.cmd Already Started
Oracle Restricted Apache Server PROD_apps11i adaprstctl.cmd Disabled
Oracle Apache Server PROD_apps11i for PL/SQL adapcctl.cmd Disabled
Oracle TCF SocketServer PROD_apps11i adtcfctl.cmd Disabled
Oracle ICSM PROD_apps11i ieoicsm.cmd Disabled
Oracle iProcurement Bulk Loader PROD_apps11i icxblkctl.cmd Disabled
Oracle MWA Service PROD_apps11i mwactlwrpr.cmd Disabled
ServiceControl is exiting with status 0
Edited by: user12194837 on Aug 17, 2011 10:19 PM

The OracleConcMgrPROD_apps11i service is starting.
adcmctl.cmd exiting with status 2
.end std out.Please check the CM log file for details about the error.
The OracleConcMgrPROD_apps11i service could not be started.
A system error has occurred.
System error 1067 has occurred.
The process terminated unexpectedly.Please check the Event Viewer for details about the error.
Thanks,
Hussein

Concurrent Manager not starting automatically with adstrtal.sh apps/apps

I am facing an issue with ICM, its not starting automatically when I start the application with help of
/d01/oracle/viscomn/admin/scripts/VIS_oracleapps/adstrtal.sh apps/apps
But, I am able to start it manually with adcmctl.sh start apps/apps - any clue why its not starting automatically?
Pls let me know if any suggestions to troubleshoot...
CM log file snip -
Shutting down Internal Concurrent Manager : 26-JUN-2008 11:06:13
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPCSQ encountered an ORACLE error. ORA-01017: invalid
username/password; logon denied
Review your error messages for the cause of the error. (=<POINTER>)
The VIS_0626@VIS internal concurrent manager has terminated with status 1 - giving up.
Thanks,
Ambi

This issue has been fixed, it was due to (apps) password was misspelt in the script calling the adstrtal.sh script.

Concurrent Manger not startted after clone in apps 11i

Hi All,
After clone refresh concurrent managers are not started. The value of concurrent_queue_name, node_name is not correct in table fnd_concurrent_queues table.
O/P of the queries
SQL> SELECT trigger_name , status FROM user_triggers WHERE table_name = 'FND_NODES' ;
TRIGGER_NAME STATUS
UPNAME ENABLED
FNDSM ENABLED
SQL> select concurrent_queue_name, node_name from fnd_concurrent_queues where manager_type=6;
CONCURRENT_QUEUE_NAME NODE_NAME
FNDSM_CLONEAPPL CLONEAPPL
FNDSM_PRODDB PRODDB
FNDSM_PRODAPPL PRODAPPL
FNDSM_AUTHENTICATION AUTHENTICATION
It would contain value as clonedb instead of proddb. can i manually edit this table and retest the issue?
Please any suggestions will be greatly appreciated.
Thanks in Advance.

Hi,
Can you find any errors in the CM log file?
Please follow the steps in (Note: 391406.1 - How to get a clean Autoconfig Environment) to clean FND_NODES table and run AutoConfig on the database and the application tier nodes, and check then. You may also run cmclean.sql (Note: 134007.1 )once AutoConfig is done and before starting the CM.
Regards,
Hussein

Object manager not starting after initial install

Solaris 10/x86, SGD 4.2 - installation was smoothforward.
I was able to open a terminal server connection to a windows host using the wizards but I'm unable to start the object manager.
After clicking on it I get in the detail view:
Initialising ...
Starting the application...
Logging in to the application server...
Passwort:
I am logged on as root. What is the problem here?
Any hints are appreciated.
Markus

I don't know what you mean with "connect via ssh"...
I have installed the software on the console. Then I fired up the webbrowser (as in the documentation) and logged in as root (locally).
How is that done when nowhere ssh is explicitly specified?
Markus

IPod service manager will not start after installing iTunes 10

iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
now what do I do?

Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).

Firefox will not start after I upgraded from Ubuntu 8.04 to Ubuntu 10.04.

I was using Firefox without issue on Ubuntu 8.04. I then upgraded to Ubuntu 10.04. Firefox would not start after upgrade. Message said it was already running!
I checked the System Monitor and saw it was "sleeping". I ended process. Firefox then would start, however..... I always have to go into System Monitor before I start Firefox to stop it from running (sleeping) even if I already just quit the program or after a fresh reboot.
I do not use a firewall or virus program.
My router has some sort of firewall hardware, and it is the same router I used with 8.04 with no problem.
What is going on? Why is the program sleeping when I try to start it. Why do I always get the message that it is already running (and I have to shut it down) before I can start it.
It is either a Ubuntu problem or a Firefox problem.
Sonny.

''Crashes at startup can occur in Firefox 7 or above (but not Firefox 6 or earlier) if you are using a corporate login system such as IBM Tivoli Access Manager or Oracle Enterprise Single Sign On Manager ([https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927]). '''See the bug report for a suggested workaround''' or downgrade to Firefox 3.6.xx (available [http://www.mozilla.org/firefox/all-older.html here]) which is still being maintained.''
Ref: http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
The workaround for the crash is linked [https://bugzilla.mozilla.org/attachment.cgi?id=563484 HERE], under "Attachments" in the bug report. When you click that link it will show the contents of the .reg file (you can save the page as "ff7fix.reg" on your computer, and then merge it into the Windows registry, f you are comfortable doing that).

Firefox will not start, after reboot.

For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was released

Hello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Windows 8.1 desktop PC not starting after hibernation

Hi,
I have a PC that is not starting after hibernation. There are different errors appearing after my tries to repair the boot. I have tried to find a document online describing the boot process but I can't find any. I know how it worked in the old days with boot.ini
and such but this new one is hard to figure out without a desciption.
First I tried to use the automatic repair process but that didn't work. I have also tried bootrec, bootedit, and bcdboot.
I then bought the Easy Recovery Essentials from NeoSmart Technologies but that didn't help to fix the issue, PC still boots to error 1. below. I tried the following process that they suggested:
I have followed the instructions on this link http://j.mp/BcdRepair that they suggested but it didn't help. Instead of the two errors I have come across (PROCESS1_INITIALIZATION_FAILED and error code 0xc000000f on file \EFI\Microsoft\Boot\BCD via F8, both with
white text on blue background), I got to a black page with grayish text telling me the following:
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc [...]
2. Choose your language [...]
3. Click "Repair your computer."
File: \Windows\system32\winload.exe
Status: 0xc000000f
Info: The application or operating system couldn't be loaded because a required file is missing or contains errors.
It looks like one boot entry gets added to the boot menu every time the PC runs the automatic repair process. In the boot menu I now have more than ten occurrences of Windows Boot Manager.
Errors:
1. Your PC ran into a problem and needs to restart [...] you can search online later for this error: PROCESS1_INITIALIZATION_FAILED
2. Manual boot to one of the Windows Boot Manager entries that appears via F8 gives me the error code 0xc000000f on file \EFI\Microsoft\Boot\BCD.
I even tried to copy the BCD from an exactly identical PC but then the path to the BCD disappeared and I'm not sure what drive letter to enter in bcdedit because C: is not C: but X: when booted into Advanced resque mode.
I could just reinstall Windows 8.1 but it feels frustrating, all the files are there. I just need to fix the boot.
Sorry if this post is a bit of messed up, that's about how I feel right now... :)
Does anyone have any suggestions and/or can point me in the direction of a nice document describing how the boot process works, where the BCD is located (I have several on the PC) I would be very happy.
Many thanks in advance.

Hi,
According to your description, in my opinion, it seems like not bcd file problem. It's PC itself problem, maybe a hardware problem, also can be system componments corrupt.
Can this PC startup successfully if you choose reboot or shutdown PC? Or this problem just occures after resume system from hibernate?
For Windows boot process knowledge, you can refer to the contents of the link below for more details:
http://social.technet.microsoft.com/wiki/contents/articles/11341.the-windows-7-boot-process-sbsl.aspx
For your problem, in my opinion, it would be better to use System installation to fix this system file for test.
Roger Lu
TechNet Community Support

RAC does not start after trying to move storage

Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node                      Reachable?
node1                                 yes
node2                                 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name                             Comment
node2                                 passed
node1                                 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name                             Status
node2                                 not running
node1                                 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name                             Running
node2                                 no
node1                                 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name     CRS daemon                CSS daemon                EVM daemon
node2         no                        no                        no
node1         yes                       no                        yes
Checking CRS health...
Check: Health of CRS
Node Name                             CRS OK?
node1                                 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.

Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started

FP Install Will Not Start after DLM Install

The FP installation will not start after an apparent DLM installation. The DLM appears to install and the control panel shows it is present, but the FP installation will not start. There are no other messages that appear. A restart and reinstallation attempt installs the DLM again, but still no FP install. Using XP SP3 and IE 8.0.
Thx

Hi mont1228,
The Adobe Download Manager (DLM) executes the Flash installer in "silent mode" so you shouldn't see a dialog box. To confirm that Flash was installed successfully, go to http://www.adobe.com/software/flash/about/ and let me know if the animation doesn't appear.
Best regards,
Chris
clechner//adobe

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Concurrent Manager Not Started after RUP7

Similar Messages

Maybe you are looking for