Concurrent manager problem i.e not starting

Hai everyone ,
while iam running the concurrent program iam getting the following problem...
1>No concurrent manager is defined to process this request, so it cannot be processed.
I have been facing this problem from 1 week,even i have tried to shut down the conurrent manager and up the manager but unable to slove the problem.pls can anyone help me to get rid of the problem and iam unable run the cmclean.sql script file.can anyone tell where to run it..waiting for reply...
Thanks
srinivas

Srini,
Is this custom concurrent program ?
If this is standard Oracle Request could you share name of request so that I can check to which manager its assigned to so that you can check if that manager is Up or not .
Looking at your message it seems this is custom request which is not assigned to any manager & by default it should have been picked up by Standard Manager but their might be some incompatibilities
Atul
http://teachmeoracle.com/forum

Similar Messages

Ora Apps Concurrent Manager problem

Here Ora Apps 11i running on a NT server. For some reason Concurrent Manager Service ORAConcMgr terminated and it is
not starting up even if i rebooted the machine. Now unable to get any reports etc. from the system. The error thrown while
starting the service is :
Could not start the ORAConcMgr Service
Error 1058 : The service cannot be started , either be it is disabled or it has no enabled service.
Can anyone tell anything useful about it.
Thanks.

Hi Regarding the concurrent manager problem.
Could you please try to be specific on your error like 1st of all are you able to start the concurrent manager?
If so what is the status?
If not what is the status can you let me know the status so that i work out some thing to solve the problem.
Thanks and Regards
Riyas
email:[email protected]

IPod Touch playng games problems , after download not start games

iPod Touch playng games problems , after download not start games

When touch the game icon just "blink" (tremor)for one momentend not start games, a lot of games,aleator ,never apps sistem to the factory.After restore to the factory seting and redownload is posible to run once or twice corectly and after that the trouble begin again.

Concurrent manager problem on Cloud

Hi
I did the clone on cloud machine.
Iam getting issues with concurrent manager.Below is the error in the log file.
establish_icm - Unable to insert ICM record
Call to establish_icm failed
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 07-MAY-2011 03:29:04 -
Shutting down Internal Concurrent Manager : 07-MAY-2011 03:29:04
List of errors encountered:
_ 1 _
Routine AFPCSQ encountered an ORACLE error. .
Review your error messages for the cause of the error. (=<POINTER>)
APP-FND-01564: ORACLE error 12899 in insert_icm_record
Cause: insert_icm_record failed due to ORA-12899: value too large for column "APPLSYS"."FND_CONCURRENT_PROCESSES"."NODE_NAME" (actual: 31, maximum: 30).
The SQL statement being executed at the time of the error was: INSERT INTO FND_CONCURRENT_PROCESSES (CONCURRENT_PROCESS_ID, LAST_UPDATE_DATE, CREATION_DATE, CREATED_BY, LAST_UPDATED_BY, ORACLE_PROCESS_ID, QUEUE_APPLICATION_ID, CONCURRENT_QUEUE_ID, OS_PROCESS_ID, SESSION_ID, PROCESS_START_DATE, PROCESS_STATUS_CODE, MANAGER_TYPE, NODE_NAME, DB_NAME, DB_DOMAIN, SQLNET_STRING, DB_INSTANCE, Instance_Number) VALUES (:cpid, SYSDATE, SYSDATE, :mgrusrid, :mgrusrid2, :opid, :qappid, :qid, :ospid, :osid, SYSDATE, 'A', 0, :node, :dbname, :dbdomain, :dbinst, (Select instance_name from v$instance), (Select instance_number from v$instance)) and was executed from the file &ERRFILE.
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
sh: line 63: mail: command not found
The DEMO_0507@DEMO internal concurrent manager has terminated with status 1 - giving up.
[root@domU-12-q1-39-1A-05-F3 log]# hostname
domU-12-3q-39-1A-05-F3.compute-1.internal
SQL> select node_name from fnd_nodes;
NODE_NAME
AUTHENTICATION
RDCORACLEAPP
RDCORACLEDB
Where does this get the hostname or node name from.
Pls help.
Sree

Where does this get the hostname or node name from.From the hosts file and from the source instance that you have cloned from -- Concurrent Managers Fail To Start After New Install of Release 12 [ID 413164.1]
Please purge FND_NODES table as per (Concurrent Processing - Steps To Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]) and after correcting all the entries in the hosts file, and check then (make sure you run AutoConfig on the database/application tier nodes).
Thanks,
Hussein

Concurrent manager Log file is not shwoing.

User not able to view concurrent manager log file.
when click on View log buttion below error showed.
"Client routine fdpvwr failed to prepare for file transfer"
Thank in advance for you help

Hi Hussain,
i am replying to Milind's mail.As per your given note id 466743.1.We have checked that if any interoperablity patch is missing,but in our case we haven't missed interoperability patch before applying RUP 7 patch.After that we compiled apps schema&relinked f60webmx as per given google resolution.Since than the error is not yet resplved.It is comming "Client routine fdpvrw failed for file transfer".Please help us to provide a exact resolution for this.
Regards,
Pavan Kumar K.

WLS5.1 SP8 problem : weblogic does not start anymore : method getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found

Hello,
I currently have a problem with the EJBException which does not give the
client the getCausedBy() Exception. I d' like to try the 5.1 sp8 to see if
the bug is fix.
Unfortunately, after having installed the sp8, my WLS 5.1 does not start
anymore : I get an invocationTargetException.
Does anyone have a clue ?
Best Regards.
dom
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError:
weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:141)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:113)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:105)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1571)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
539)
at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:523)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:418)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1312)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:141)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:113)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:105)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1571)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
539)
at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:523)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:418)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1312)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
tel 02 38 64 37 95
mailto:[email protected]

Well... I've made a big classpath mistake.
It works indeed.
dom
"Dominique Jean-Prost" <[email protected]> a écrit dans le
message news: [email protected]...
Hello,
I currently have a problem with the EJBException which does not give the
client the getCausedBy() Exception. I d' like to try the 5.1 sp8 to see if
the bug is fix.
Unfortunately, after having installed the sp8, my WLS 5.1 does not start
anymore : I get an invocationTargetException.
Does anyone have a clue ?
Best Regards.
dom
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError:
weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:141)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:113)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:105)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1571)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
539)
at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:523)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:418)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1312)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:141)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:113)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:105)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1571)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
539)
at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:523)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:418)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1312)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
tel 02 38 64 37 95
mailto:[email protected]

Oracle Process Manager(instance1) Service does not start

Hello Friends,
My Oracle Process Manger (instance1) windows service is not starting up.Due to which my presentation service is also down.
Kindly suggest any solution. I am using OBIEE 11.1.1.7

Thank you Reddy for your reply.
I am getting below error message in presentation server log, as well I cannot open rpd in ONLINE mode.
[2013-11-14T12:07:40.000+05:30] [OBIPS] [ERROR:31] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Could not create a system user connection to Oracle BI Server during start-up. Please check the error message and try again.
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:odbcuserpoploaderimpl.cpp

VDI 3.0 installation problems - VDI database not starting

Hi
I am trying to install VDI 3.0 (released yesterday) on a Sun Fire X2200 server, running Solaris 10u6. The package installation runs just fine, but I can't get VDI configured properly. When running the vdi-config program, I choose to set up a evaluation VDI host, and then everything runs fine until it reaches the "Starting Sun VDI database (MySQL)" point. It hangs there for a couple of minutes, before simply stating "Failed". The configuration program also prints out the following in the end of the run:
Common Agent Container Configuration
   + Restarting Common Agent Container service...
Error when trying to start SMF service: [svc:/application/management/common-agent-container-1:default].
Please check the SMF log file for more information: [/var/svc/log/application-management-common-agent-container-1:default.log].This seems to be because the common-agent-container-1 service depends on vdadb:sql running, which it fails to.
If I try to start vdadb:sql manually after the configuration (using svcadm clear vdadb:sql), the following is put into the services log, and the service is still in maintenance mode:
[ Mar 25 15:16:19 Executing start method ("/opt/SUNWvda/lib/vda-db-service start") ]
Configuration:
   MGMT_NODE=[1]; NDBD_NODE=[1]; SQL_NODE=[1]; MULTI_HOST_MODE=[0];
   NDBD_CONNECTSTRING=[localhost]; NDBD_INITIAL_ARG=[--initial]; NDBD_NODE_ID=[2];
Starting the Sun Virtual Desktop Infrastructure Database service:
   - Starting Management Node... OK
   - Starting Data Node...
     Arguments: [localhost --initial]...
     Error
[ Mar 25 15:21:26 Method "start" exited with status 95 ]I can't seem to get any further debug messages, and I can't find out how to go any further with this, as "Failed" and "Error" seems to be the only error messages I get.
As far as I can see, the error message is coming from the "waitForNdbdNodeStartup" function on line 296 of /opt/SUNWvda/lib/vda-db-service, but I can't really get any nearer than that.
Does anybody know how to get further in this regard?
/Jeppe

Hi, I have been reading and trying the solutions on this post to no avail ... as this post is still open and it seems like the subject still applies to my problem, I am using this one... the case is:
I am trying to setup an evaluation for vdi3 using several machines, 1 for the vdi core, 2 for the secondaries and another one as the storage server. the main and one secondary installed and got configured fine, but the second secondary is failing and I dont know why, I just unconfigured and uninstalled it and did reinstalled and reconfigured it again, but something went wrong, I havent
touched anything except changing the 300 to 16 in the ini file ...
bash-3.00# /opt/SUNWvda/sbin/vda-config
Sun Virtual Desktop Infrastructure 3.0 Configuration
An Evaluation Sun VDI Host configures all necessary components on one server.
1 Primary Sun VDI Host
2 Secondary Sun VDI Host
0 Evaluation Sun VDI Host
Select (1/2/0): 2
Specify the maximum number of concurrent sessions this host will support [100]: 20
There are as many local users created as the maximum number of concurrent sessions defined.
Enter the user ID range start [150000]: 20000
Enter the DNS name of the primary host: holanda
Enter the DNS name of this host [ghana]:
You can use the MySQL database of the Sun VDI cluster or connect to a remote MySQL database.
1 Sun VDI cluster database
2 Remote database
Select ([1]/2):
Do you want to apply the settings? ([y]/n)
Sun Ray Server Software Configuration
+ Providing configuration data...
+ Loading Sun Ray data store...
+ Populating Sun Ray data store...
+ Creating Sun Ray core services configuration...
+ Restarting Sun Ray data store daemon...
+ Configuring Sun Ray Server Software Web Administration...
+ Adding 20 user accounts for Sun Ray sessions...
Sun Ray Client Configuration
+ Enabling Kiosk Mode Policy for All Card and Non-Card Users...
+ Enabling LAN Connections...
+ Configuring Sun Ray Connector for Windows Operating Systems...
+ Restarting Sun Ray Server Software...
MySQL Database Configuration
+ Creating MySQL group (vdadb)...
+ Creating MySQL user (vdadb)...
+ Setting up MySQL directory...
+ Setting up MySQL cluster directory...
+ Initializing database...
+ Starting Sun VDI database (MySQL)...
Failed.
+ Synchronizing time...
Sun VDI Web Administration Configuration
+ Enabling Sun VDI web administration...
+ Restarting Sun VDI web administration...
RDP Broker Configuration
+ Starting RDP broker...
Common Agent Container Configuration
+ Restarting Common Agent Container service...
Error when trying to start SMF service: [svc:/application/management/common-agent-container-1:default].
Please check the SMF log file for more information: [var/svc/log/application-management-common-agent-container-1:default.log].
The configuration of Sun VDI 3.0 has completed.
A log file is available at '/var/adm/log/vda-config.2009_04_13_09:00:44.log'.
The command line tools are located at '/opt/SUNWvda/sbin'.
You can access the Sun VDI web administration at http://ghana:1800
the log shows:
bash-3.00# tail -30 /var/svc/log/application-database-vdadb:core.log
Configuration:
MGMT_NODE=[0]; NDBD_NODE=[1]; SQL_NODE=[0]; MULTI_HOST_MODE=[1];
NDBD_CONNECTSTRING=[holanda]; NDBD_INITIAL_ARG=[--initial]; NDBD_NODE_ID=[2];
Starting the Sun Virtual Desktop Infrastructure Database service:
- Starting Data Node... 2009-04-13 08:37:47 [ndbd] INFO -- Unable to alloc node id
2009-04-13 08:37:47 [ndbd] INFO -- Error : Could not alloc node id at holanda port 1186: No free node id found for ndbd(NDB).
error=2350
2009-04-13 08:37:47 [ndbd] INFO -- Error handler restarting system
2009-04-13 08:37:47 [ndbd] INFO -- Error handler shutdown completed - exiting
sphase=0
exit=-1
Arguments: [holanda --initial ]...
Error (255)
[ Apr 13 08:37:47 Method "start" exited with status 95 ]
[ Apr 13 09:04:02 Disabled. ]
[ Apr 13 09:04:02 Rereading configuration. ]
[ Apr 13 09:04:02 Rereading configuration. ]
[ Apr 13 09:04:03 Rereading configuration. ]
[ Apr 13 09:04:03 Enabled. ]
[ Apr 13 09:04:03 Executing start method ("/opt/SUNWvda/lib/vda-db-service start") ]
Configuration:
MGMT_NODE=[0]; NDBD_NODE=[1]; SQL_NODE=[0]; MULTI_HOST_MODE=[1];
NDBD_CONNECTSTRING=[holanda]; NDBD_INITIAL_ARG=[--initial]; NDBD_NODE_ID=[2];
Starting the Sun Virtual Desktop Infrastructure Database service:
- Starting Data Node...
Arguments: [holanda --initial ]...
Error
[ Apr 13 09:11:33 Method "start" exited with status 95 ]
bash-3.00#
bash-3.00# svcs -l svc:/application/database/vdadb:corefmri svc:/application/database/vdadb:core
name SUNWvda MySQL Cluster and Application
enabled true
state maintenance
next_state none
state_time Mon Apr 13 09:11:33 2009
logfile /var/svc/log/application-database-vdadb:core.log
restarter svc:/system/svc/restarter:default
contract_id
dependency require_all/none svc:/milestone/network:default (online)
dependency require_all/none svc:/system/filesystem/local:default (online)
dependency require_all/refresh svc:/milestone/name-services (online)
bash-3.00# svcs -a|grep vda
legacy_run 8:58:36 lrc:/etc/rc3_d/S99vda-webadmin-init
disabled 9:04:02 svc:/application/database/vdadb:sql
maintenance 9:11:33 svc:/application/database/vdadb:core
bash-3.00# cacaoadm status
default instance is ENABLED at system startup.
default instance is not running.
bash-3.00# /opt/SUNWvda/sbin/vda-db-status
Node Type IP/HostName Id Status
Management node holanda 1 up
Data node ghana 2 down
Data node paraguay 3 up
as I said, the only thing I changed is the value for the redo files, as suggested in one of the replies above.
This is the second time I uninstall/unconfigure this server and start over (config/install)
this is a newly installed Sol10 U6 system:
bash-3.00# uname -a
SunOS ghana 5.10 Generic_138889-03 i86pc i386 i86pc
bash-3.00# prtconf
System Configuration: Sun Microsystems i86pc
Memory size: 8064 Megabytes
System Peripherals (Software Nodes):
bash-3.00# prtdiag | head -10
System Configuration: Sun Microsystems Sun Fire X4100 Server
BIOS Configuration: American Megatrends Inc. 080010 01/31/2006
BMC Configuration: IPMI 2.0 (KCS: Keyboard Controller Style)
==== Processor Sockets ====================================
Version Location Tag
AMD Opteron(tm) Processor 254 H0
AMD Opteron(tm) Processor 254 H1
bash-3.00# swap -s
total: 876688k bytes allocated + 405180k reserved = 1281868k used, 8752988k available
help is appreciated.

Using Outlook Business Manager but SQL will not start

When I start Outlook Business Manager it tells me that SQL is not running. I have followed all the procedures to try to restart it without success.
The SQL log is reporting the following
2014-01-22 09:38:43.54 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated
authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2014-01-22 09:38:43.54 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
2014-01-22 09:38:43.61 spid10s     Error: 9003, Severity: 20, State: 1.
2014-01-22 09:38:43.61 spid10s     The log scan number (36:96:1) passed to log scan in database 'model' is not valid. This error may indicate data corruption or that the log file (.ldf) does not match the data file (.mdf). If this error
occurred during replication, re-create the publication. Otherwise, restore from backup if the problem results in a failure during startup.
2014-01-22 09:38:43.61 spid10s     SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Any help is appreciated
Thanks
Mark

2014-01-22 09:38:43.54 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3.
Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos.
Helo Mark,
SPN registration failed, you can register it manually, see
Register a Service Principal Name for Kerberos Connections
Or you can use this tool:
Microsoft® Kerberos Configuration Manager for SQL Server®
Olaf Helper
[ Blog] [ Xing] [ MVP]

Mac OSX sofware update problems-computer will not start-up any more

Hello
I am having problems & I cannot get back into my computer. It won't complete the start up & just has the grey apple in the middle of the white screen and nothing else.
I have an iBook G4 with Tiger on it - I am not sure which version of Mac OS X I was on when I did the software update but the one I was on last year when I came to this forum was 10.4.8 & I think I have updated it a few times since then so it was probably as I was attempting to install 10.4.11 as I do not have Leopard yet.
The problem began when I did the Mac OSX update that it told me about in software update & when it had completed the update it said I needed to restart my computer which I did & ever since then it will not completely re-boot. (Like I said it just has the white screen/grey apple before it gives the option of who you want to login as).
It seems as though other people have been having similar problems after installing Mac OSX software updates but I cannot find anything here in the forum that solves my problems (or at least not that I can understand at th moment...!)
I need to access things off my computer & can't. Not everything on there was backed up as I had been working on things that day/week. I also don't know how to access my files from another computer (the ones I am trying to connect from does not have tiger it is a PowerBook G4 & it has Mac OSX 10.3.9 on it).
Does anyone know the reason for this problem & how to access files from another computer via an etheret cable in OSX. I know someone who says it was a lot easier to connect computers before Mac OSX days but now it seems really difficult. The only way to start up my iBook G4 is using the Mac OSX install disk & I have tried to verify & repair hard disk permissions using disk utility that comes on the disk as well as verifying & repairing the actual disk but this has not fixed the problem.
I am hoping that I will be able to at least access my files & copy them over to be backed up before I do an erase & install of Mac OSX from the disks. But I am unsure of how to connect my iBook the PowerBook G4 I am on right now. Please help if you know how!
Thanks,
Jazamin

This just worked for my by connecting my other PPC computer to my G5.
http://discussions.apple.com/thread.jspa?threadID=1247044&tstart=0
Go down to the other link and follow the same instructions.
You must start up the good computer and shut down the frozen one. Connect via firewire and then hold down the T key while you start the frozen one.
It will show up on your good one, and then install the combo on the frozen one.
Hold down the power key on that computer to shut it down, disconnect and then start up again.
Good luck
MM

[SOLVED]Connecting to L2TP/IPSec VPN problem: pppd seems not starting

I'm trying to connect to an L2TP/IPsec VPN server, by ipsec-tools + xl2tpd.
Here is my setup:
/etc/racoon.conf:
log debug;
path pre_shared_key "/etc/racoon/psk.txt";
padding {
maximum_length 20;
randomize off;
strict_check off;
exclusive_tail off;
remote anonymous {
exchange_mode main;
doi ipsec_doi;
situation identity_only;
generate_policy on;
nat_traversal on;
proposal_check obey;
proposal {
encryption_algorithm aes 256;
lifetime time 3600 sec;
hash_algorithm sha1;
authentication_method pre_shared_key;
dh_group modp1024;
sainfo anonymous {
lifetime time 3600 sec;
encryption_algorithm aes 256;
authentication_algorithm hmac_sha1;
compression_algorithm deflate;
/etc/racoon/psk.txt:
#broadband
137.189.192.201 the-server-psk
137.189.192.204 the-server-psk
Here the two IPs are the IPs of vpn.cuhk.edu.hk, which is the VPN server.
/etc/xl2tpd/xl2tpd.conf:
[global]
port = 1701
auth file = /etc/ppp/pap-secrets
debug network = yes
debug avp = yes
debug packet = yes
debug state = yes
debug tunnel = yes
[lac connect]
lns = vpn.cuhk.edu.hk
name = vpn-server
redial = yes
redial timeout = 15
max redials = 5
hidden bit = yes
refuse chap = yes
require pap = yes
ppp debug = yes
pppoptfile = /etc/ppp/options.xl2tpd
/etc/ppp/pap-secrets:
# Secrets for authentication using PAP
# client server secret IP addresses
myusername * mypassword *
/etc/ppp/options.xl2tpd:
lock
debug
mtu 1000
nobsdcomp
nodeflate
noaccomp
nopcomp
novj
defaultroute
refuse-chap
refuse-mschap
refuse-mschap-v2
connect-delay 5000
name myusername
password mypassword
spd.sh:
#!/bin/sh
Then I do the following:
# 192.168.1.1 is my lan gateway
sudo ip route add 137.189.192.201 via 192.168.1.1
sudo ip route add 137.189.192.204 via 192.168.1.1
# For adding spd, script from the VPN server
echo -e flush\; | sudo setkey -c
echo -e spdflush\; | sudo setkey -c
echo -e spdadd 192.168.1.173/32\[1701\] 0.0.0.0\/0\[0\] any \-P out ipsec esp\/transport\/\/require\; | sudo setkey -c
sudo systemctl start racoon
sudo systemctl start xl2tpd
echo "c connect" | sudo tee /var/run/xl2tpd/l2tp-control
I expect that some network interface like ppp0 will be created, but nothing happened.
Then I check the record, and find something weird in xl2tpd log (from journalctl, racoon and sudo logs skipped):
8月 21 01:13:40 nkdesktop systemd[1]: Stopped Level 2 Tunnel Protocol Daemon (L2TP).
8月 21 01:13:41 nkdesktop systemd[1]: Starting Racoon IKEv1 key management daemon for IPSEC...
8月 21 01:13:41 nkdesktop systemd[1]: Started Racoon IKEv1 key management daemon for IPSEC.
8月 21 01:13:43 nkdesktop systemd[1]: Starting Level 2 Tunnel Protocol Daemon (L2TP)...
8月 21 01:13:43 nkdesktop systemd[1]: Started Level 2 Tunnel Protocol Daemon (L2TP).
8月 21 01:13:43 nkdesktop xl2tpd[19639]: xl2tpd[19639]: setsockopt recvref[30]: Protocol not available
8月 21 01:13:43 nkdesktop xl2tpd[19639]: xl2tpd[19639]: Using l2tp kernel support.
8月 21 01:13:43 nkdesktop xl2tpd[19639]: xl2tpd[19639]: xl2tpd version xl2tpd-1.3.6 started on nkdesktop PID:19639
8月 21 01:13:43 nkdesktop xl2tpd[19639]: xl2tpd[19639]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc.
8月 21 01:13:43 nkdesktop xl2tpd[19639]: xl2tpd[19639]: Forked by Scott Balmos and David Stipp, (C) 2001
8月 21 01:13:43 nkdesktop xl2tpd[19639]: xl2tpd[19639]: Inherited by Jeff McAdams, (C) 2002
8月 21 01:13:43 nkdesktop xl2tpd[19639]: xl2tpd[19639]: Forked again by Xelerance (www.xelerance.com) (C) 2006
8月 21 01:13:43 nkdesktop xl2tpd[19639]: xl2tpd[19639]: Listening on IP address 0.0.0.0, port 1701
8月 21 01:13:45 nkdesktop xl2tpd[19639]: xl2tpd[19639]: get_call: allocating new tunnel for host 137.189.192.204, port 1701.
8月 21 01:13:45 nkdesktop xl2tpd[19639]: xl2tpd[19639]: Connecting to host vpn.cuhk.edu.hk, port 1701
8月 21 01:13:45 nkdesktop xl2tpd[19639]: xl2tpd[19639]: control_finish: message type is (null)(0). Tunnel is 0, call is 0.
8月 21 01:13:45 nkdesktop xl2tpd[19639]: xl2tpd[19639]: control_finish: sending SCCRQ
8月 21 01:13:46 nkdesktop xl2tpd[19639]: xl2tpd[19639]: network_thread: select timeout
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: network_thread: select timeout
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: network_thread: recv packet from 137.189.192.204, size = 103, tunnel = 30858, call = 0 ref=0 refhim=0
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: handle_avps: handling avp's for tunnel 30858, call 0
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: message_type_avp: message type 2 (Start-Control-Connection-Reply)
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: protocol_version_avp: peer is using version 1, revision 0.
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: framing_caps_avp: supported peer frames: async sync
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: bearer_caps_avp: supported peer bearers:
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: firmware_rev_avp: peer reports firmware version 1648 (0x0670)
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: hostname_avp: peer reports hostname 'eriwan'
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: vendor_avp: peer reports vendor 'Adtran, l2tpd'
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: assigned_tunnel_avp: using peer's tunnel 4733
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: receive_window_size_avp: peer wants RWS of 4. Will use flow control.
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: control_finish: message type is Start-Control-Connection-Reply(2). Tunnel is 4733, call is 0.
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: control_finish: sending SCCCN
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: Connection established to 137.189.192.204, 1701. Local: 30858, Remote: 4733 (ref=0/0).
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: Calling on tunnel 30858
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: control_finish: message type is (null)(0). Tunnel is 4733, call is 0.
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: control_finish: sending ICRQ
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: network_thread: recv packet from 137.189.192.204, size = 12, tunnel = 30858, call = 0 ref=0 refhim=0
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: network_thread: recv packet from 137.189.192.204, size = 28, tunnel = 30858, call = 63662 ref=0 refhim=0
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: handle_avps: handling avp's for tunnel 30858, call 63662
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: message_type_avp: message type 11 (Incoming-Call-Reply)
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: assigned_call_avp: using peer's call 31346
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: control_finish: message type is Incoming-Call-Reply(11). Tunnel is 4733, call is 31346.
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: control_finish: Sending ICCN
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: Call established with 137.189.192.204, Local: 63662, Remote: 31346, Serial: 1 (ref=0/0)
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: start_pppd: I'm running:
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "/usr/sbin/pppd"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "passive"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "nodetach"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: ":"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "refuse-chap"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "name"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "vpn-server"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "debug"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "file"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "/etc/ppp/options.xl2tpd"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "plugin"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "pppol2tp.so"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "pppol2tp"
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: "7"
8月 21 01:13:47 nkdesktop pppd[19647]: Plugin pppol2tp.so loaded.
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: network_thread: recv packet from 137.189.192.204, size = 12, tunnel = 30858, call = 0 ref=0 refhim=0
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: network_thread: recv packet from 137.189.192.204, size = 12, tunnel = 30858, call = 63662 ref=0 refhim=0
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: network_thread: recv packet from 137.189.192.204, size = 38, tunnel = 30858, call = 63662 ref=0 refhim=0
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: handle_avps: handling avp's for tunnel 30858, call 63662
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: message_type_avp: message type 14 (Call-Disconnect-Notify)
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: result_code_avp: peer closing for reason 1 (General request to clear control connection), error = 0 ()
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: assigned_call_avp: using peer's call 31346
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: control_finish: message type is Call-Disconnect-Notify(14). Tunnel is 4733, call is 31346.
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: control_finish: Connection closed to 137.189.192.204, serial 1 ()
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: Terminating pppd: sending TERM signal to pid 19647
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: network_thread: recv packet from 137.189.192.204, size = 38, tunnel = 30858, call = 0 ref=0 refhim=0
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: handle_avps: handling avp's for tunnel 30858, call 0
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: message_type_avp: message type 4 (Stop-Control-Connection-Notification)
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: assigned_tunnel_avp: using peer's tunnel 4733
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: result_code_avp: peer closing for reason 1 (General request to clear control connection), error = 0 ()
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: control_finish: message type is Stop-Control-Connection-Notification(4). Tunnel is 4733, call is 0.
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: control_finish: Connection closed to 137.189.192.204, port 1701 (), Local: 30858, Remote: 4733
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: build_fdset: closing down tunnel 30858
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: network_thread: select returned error 9 (Bad file descriptor)
8月 21 01:13:47 nkdesktop xl2tpd[19639]: xl2tpd[19639]: network_thread: select returned error 4 (Interrupted system call)
... then xl2tpd repeatedly trying to build a connection and fails for every 15s ...
I think pppd should have showed more logs, rather than just loading a module.
But I have no idea about what's wrong.
Or did I just forget to turn on the log function of pppd? If so, how should I turn it on?
Anyone can help?
Last edited by nnkken (2014-08-24 08:42:03)

Additional information:
Today I decrypted the IPSec ESP packets by Wireshark (what an awesome function) and compared the L2TP message of my ArchLinux and MacOSX to the same VPN Server.
And I found that while both ArchLinux and MacOSX sends Incomming_Call_Connection (ICCN) packet, the packet are quite different:
The ArchLinux ICCN Packet has 2 additional AVP fields: Random Vector AVP and RX Connect Speed AVP.
Also, the Connect Speed AVP (and also the RX Connect Speed AVP) field is 0, which is different from MacOSX (100000).
After the ICCN packet, MacOCX sends a PPP packet over L2TP, while ArchLinux sends nothing and the server sends a Call_Disconnect_Notification to ArchLinux.
Anyone knows whether this is a bug or something wrong in config?
Last edited by nnkken (2014-08-22 20:19:49)

Concurrent Manager requires physical hostname to start??

Hi,
We are planning to setup HP Service Guard Clustering for our Oracle R12.0.6 instance.
After going thourgh HP documentation(http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA1-2863ENW&cc=us&lc=en)
, i understood that Serviceguard uses virtual hostname concept for failover.
The HP document suggests to use PCP, which is a complex setup for us as per our existing envirtonment.
But Oracle says CM requires physical hostname to start.
CM will not failover with virtual hostname according to oracle.
Could anybody kindly explain why CM need physical hostname?
how can i use Note: 734506.1 - Virtual Hostnames For Concurrent Managers with the above HP document to setup a succesfull HA E-Business Suite R12.
Please suggest me for better.
Thanks.

Hi user;
Please check
How To Configure Autoconfig For Hp Service Guard [ID 790123.1]
Implementing Virtual Host, Concurrent Managers and EM DBconsole on Oracle Applications R12 [ID 603883.1]
Also see:
http://oracleappstechnology.blogspot.com/2009/06/concurrent-managers-require-physical.html
Hope it helps
Regard
Helios

Concurrent Manager Problems

Hi friends
I have a problem when I load the concurrentmanger service. When I do I notice that several programs begin to run, one of them is FNDCRM.EXE. But when this program runs, there is a message that aappears:
FNDCRM.EXE - Application error
the instruction at 0x77bd8790 referenced memory at 0x00bfb00. The memory could not "read"
My question is how can I eliminate this error, is necessary run FNDCRM.exe, what does it do.
Someone could help me, thanks a lot

Note 74661.1 - - Descriptions and Examples of the Oracle Applications AD Utilities
Example on relinking "GLPPOS" and "APXRTB"
$adrelink force=y "gl GLPPOS" "ap APXRTB"
or
$adrelink force=y ranlib=y "fnd all"
or run
adadmin at cmd prompt and follow the menu options

Music Manager v2.0 will not start

As in subject, I get the following mesage when I attempt launch Music Manager on my PC with Vista OS, "Microsoft Visual C++ Runtime Error Abnormal Program termination", afterwhich the program just closes. Any suggestions? Many Thanks in advance.

I got the same problem sometimes if i didnot install any third plug-ins.But the problem goes aways after using some codec like Quick Time.

Power switch problems (computer will not start)?

When I woke up this morning my (new) computer refused to start, it worked fine yesterday. Since the LED on the PSU was on I figured that it was something wrong with the power button. I switched places of the reset and power button on the mobo and the computer booted fine one (1) time, but wouldn't start the second time i tried.
Any idea of what could be wrong?
Computer:
Mobo:
MSI P965 Platinum
CPU:
Intel Core 2 Duo 2,13GHz
Memory:
Corsair TWIN2X, 6400 DDR2, 2048MB
HDD:
Samsung SpinPoint SP2504C 250GB
GPU:
Sapphire Radeon X1950PRO 256MB GDDR3
Chassis:
Cooler Master Mystique 631
PSU:
Hiper Type-R 530W

Check all power connections from PSU to Mainboard and components.
-JPWR1 (24pin)
-JPWR2 (8pin)
-JPWR3 (4pin)
Check power connection your X1950PRO (6pin)
If that doesn't help, clear CMOS and try again.

Concurrent manager problem i.e not starting

Similar Messages

Maybe you are looking for