Concurrent processing status down in OAM
Hi ,
From OAM->Applications Dashboard ->Overview
the status for concurrent processing shows down but infact it is up
I also checked from OAM->Hosts->view configuration
whereas here the status for concurrent processing is up.
thanks all in advance..
applications version: 11.5.10.2
Hi,
Please see if these documents help.
Note: 405375.1 - OAM Reports 'Internal Concurrent Manager Found Node To Be Down.' When Node is Up
Note: 419823.1 - OAM: Web Components Status: Shows Down Even When The System Works Fine
Note: 309271.1 - Web Components Status in OAM Shows All Down Even When the System Works Fine
Note: 434569.1 - OAM application dashbord shows all the web components with status down whereas they are up
Note: 287415.1 - Host Status In Application Dashboard Overview Tab Shown As Down in OAM
Regards,
Hussein
Similar Messages
-
Host Status Down for DB Node in OAM
Hi all,
I see that my db node host status is showing in Red (down) in OAM but our Database and Listener is up and running;
AppsVer:r12.1.1
OS LInux 5
What would be the reason?
Thanks
Maverick
Edited by: Maverick on Nov 23, 2011 2:06 PMMaverick,
Please see old threads which discuss the same topic.
https://forums.oracle.com/forums/search.jspa?threadID=&q=OAM+AND+Down+AND+Database&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=OAM+AND+Down+AND+Dashboard&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Concurrent manager status inactive every application services restart
ebs: 11.5.10.2
os: AIX 5
whenever im restarting application server i mean to take coldbackup or for any workaround
the concurrent manager are down i checked with command ps -ef|grep fndlibr|grep APPLMGR|wc -l it shows only one concuurent manager is running so i have to go for a Conccurent manager recover through OAM then all the conccurent manager are up the same ps -ef|grep fndlibr|grep APPLMGR|wc -l shows 15
while going through Conccurent manager recovery is gives me orphaned Process(which is a schedule request from user--iam unable to cancel the request it says the conccurent manager which was handling this request does not exist) which is supposed to be killed but im unable to kill it at oslevel
when i use kill -9 ospid it says ospid doesnt exist (may be it is ospid of the user system)
can anyone say me why is this happening and lead me to a solution?
shall i go for a cmclean and if yes then tell me what cm clean does...
Thanks
ApPsMasTI,
ShARinG Is CarInGHi;
You can run cmclean.sql. For details see:
CMCLEAN
Also see:
How To Clear Orphan Generate Run Balance Processes [ID 337898.1]
Regard
Helios -
Database objects behind stats on "Concurrent Processing Dashboard" ?
I want to define a new report in oem grid about concurrent processing on a ebs target. i saw that there is some minimal stats in the 'Concurrent Processing Dashboard'. What are the DB tables used to generate this screen ?
By the way there is a bug, all number are displayed like : 2.000000 ....
ThanksHi,
What if both nodes have all modules active? (host,admin,cm,forms,web) except the database of courseDo you mean to say all application services are up and the database is down? If yes, then there must be something wrong with the dashboard itself (if the database is down, you will not be able to access the application or even access OAM).
Thanks,
Hussein -
COncurrent process fails with warning for OPP
Concurrent process generates xml output (version 5.6.2) .
When it tries to publish it , the log suggests checking out the OPP log.
The OPP log has a series of java entries for the request, including one of the type
Caused by: oracle.xdo.parser.v2.XPathException: Expected 'QNAME' instead of ''.
header of the OPP log says
Resolution History
18-OCT-06 20:36:05 GMT
Can you easily recover from, bypass or work around the problem? = NO
Does your system or application continue normally after the problem occurs? =
YES
Are the standard features of the system or application still available; is the
loss of service minor? = YES
### Informational Only:Warning Presented to Customer ###
You chose 'Other technical issues with this product' from the Type of Problem
list. This is a generic Service Request form which will require additional time
to be routed appropriately. You may be able to expedite the resolution of your
Service Request by doing the following: 1. Use your browser’s back button to
return to the Create a SR – Brief Description page. 2. Select an option from
the Type of Problem list that more closely describes the problem.
### Requested files:ACT(Note 183274.1),RDA (Note 175853.1). Files to be loaded.
None
### Detailed Problem Statement ###
Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
Attached are OPP Manager log file, Screen shot of 'Preview' output jjst before
submitting request. Also log file of failed concurrent request which contains
standard error " See OPP Service log file for more".
### Steps to Reproduce Problem ###
Registered a concurrent process with XML template , and running the process
from Receivables Manager responsibility.
Ran concurrent process for 1) Standard RAXINV report , with output method as
'XML'. 2) Customised RAXINV report, with output method as 'XML'
### Instance Name(s) and Type of System(s) Where Error Occurs ###
Lunix, 11.5.10 on 10g
### Recent Changes to this Environment ###
None
### Workarounds Used ###
None
### How is this Issue Impacting Your Business ###
Business is readying for CRP3, so would like to have reports ready by then.
Contact me via : MetaLink
18-OCT-06 20:48:07 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XML_Pub1.bmp
18-OCT-06 20:49:14 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XMLPublisher_java.t
xt
18-OCT-06 21:17:26 GMT
Hi Bashobi,
Thank you for using MetaLink. We are currently reviewing/researching the situation and will update the SR as soon as we have relevant information
Best Regards,
Bill
Oracle Support Services
STATUS
=======
@WIP -- Work In Progress
18-OCT-06 21:18:04 GMT
Email Update button has been pressed: Sending email to [email protected].
18-OCT-06 21:21:45 GMT
ISSUE CLARIFICATION
====================
On 11.5.10.2 in Production:
Find concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
EXPECTED BEHAVIOR
Expect the processes run successfully
STEPS
The issue can be reproduced at will with the following steps:
1. Registered a concurrent process with XML template .
2. Run the process from Receivables Manager responsibility.
3. Ran concurrent process for
1) Standard RAXINV report , with output method as 'XML'
2) Customised RAXINV report, with output method as 'XML'
BUSINESS IMPACT
The issue has the following business impact:
Business is readying for CRP3, so would like to have reports ready by then.
ACTION PLAN
============
Hi Bashobi,
1. Can you reproduce the issue from sysadmin responsibility with Active users report? if yes
please upload OPP log file after reproduce it and upload the request log file.
Thanks.
18-OCT-06 23:09:02 GMT
New info : [email protected] : Did the same as suggested, Request
completes successfully.
But what is the relation between Active Users report and a report sent via XML
Publisher?
19-OCT-06 15:54:26 GMT
ACTION PLAN
============
Hi Bashobi,
1. When you reproduce the issue from sysadmin responsibility with Active users report change the format out put to XML,
Save your change:
2. Upload OPP manager log file and upload the request log file.
Thanks,
Bill.
19-OCT-06 15:54:33 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 16:42:23 GMT
New info : [email protected] : Bill,
No, I could not reproduce the problem with Active Users program.
Attaching OPP manager log in the next update. Bashobi
19-OCT-06 17:05:07 GMT
New info : [email protected] : Bill, Attaching internal log and manager
log
Bashobi
19-OCT-06 17:06:08 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_internal_log.tx
t
19-OCT-06 17:07:10 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_manager_log.txt
19-OCT-06 18:14:32 GMT
UPDATE
=======
Hi Bashobi,
Thank you for providing the requested information.
Best Regards,
Bill
STATUS
=======
@WIP -- Work In Progress
19-OCT-06 18:14:36 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 18:59:25 GMT
DATA COLLECTED
===============
SCREEN SHOTS
XML_Pub1.bmp:
Error:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
LOG FILE
1. XMLPublisher_java.txt:
[10/18/06 11:16:57 AM] [5670:RT277479] Completed post-processing actions for request 277479.
[10/18/06 11:29:06 AM] [OPPServiceThread1] Post-processing request 277488.
[10/18/06 11:29:06 AM] [5670:RT277488] Executing post-processing actions for request 2
77488.
[10/18/06 11:29:06 AM] [5670:RT277488] Starting XML Publisher post-processing action.
[10/18/06 11:29:06 AM] [5670:RT277488]
Template code: XXBE_TEST_INV
Template app: AR
Language: en
Territory: US
Output type: null
[10/18/06 11:29:07 AM] [UNEXPECTED] [5670:RT277488] java.lang.reflect.InvocationTarg
etException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
10/18/06 11:29:07 AM] [5670:RT277488] Completed post-processing actions for reque
st 277488.
2. OPP_manager_log.txt:
[10/19/06 5:22:36 AM] [main] Starting GSF service with concurrent process id = 5688.
[10/19/06 5:22:36 AM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[10/19/06 5:22:37 AM] [Thread-12] Service thread starting up.
[10/19/06 5:22:37 AM] [Thread-13] Service thread starting up.
ISSUE VERIFICATION
=================
Issue veryfied by the screen shots: XML_Pub1.bmp which shows:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
ACTION PLAN
============
Hi Bashobi,
1. Since you can not reproduce the issue from sysadmin responsibility can we say the issue specific to Receivables Manager
responsibility<INV xml report>?
2. You said before: "Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.":
Is the above mean :
-The xml publisher report completed but you can not view the whole XML file
-Or the xml publisher report error out with "Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob.."
Thanks.
19-OCT-06 18:59:32 GMT
Email Update button has been pressed: Sending email to [email protected].
20-OCT-06 21:36:13 GMT
Email Update button has been pressed: Sending email to [email protected].
24-OCT-06 21:50:06 GMT
New info : [email protected] : Hi,
We are in the process of upgrading XML Publisher at the moment. I would like to
wait a day or two to test the report with the upgrade.
Thanks,Bashobi
26-OCT-06 20:15:07 GMT
New info : [email protected] : Hi,
Our DBA has applied the 5.6.2 patch on our dev instance. My concurrent process
runs to a warning.
The warnings in the OPP manager log file say
Template code: BE_RAXINV
Template app: XXBE
Language: en
Territory: US
Output type: PDF
[10/26/06 12:50:13 PM] [UNEXPECTED] [5849:RT281617]
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any idea?Hi All,
I have ran into the same issue.
"The Output Post-processor is running but has not picked up this request.
Any ideas.
Thanks
Ravi -
How to configure number of concurrent processes in XI?
Hi experts,
I have a simple interface:
FILE -> XI -> FILE
The input file is a huge file containing thousands of records.
XI will split the huge input files, so that each record gets written to one file each.
Owing to the huge number of files being generated, I have many messages in status = "To Be Delivered" in the RWB.
When I do a filter for status = "Delivering", I see 4 messages in that status. (Of course the message IDs will differ from time to time, but at any point in time, I can only see 4 messages with the status = "Delivering").
How can I increase the number of concurrent processes that produces the output files?
Please advise.
Thanks.
RonRon,
From this perfromance tuning guide , page 12 ,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
<i>The Adapter Framework requires a set of fixed application threads within the J2EE Engine for proc-essing different internal messaging queues (AFW queue, BC Adapter, CIDX Adapter, and so on). Ad-ditionally, certain channel configurations also require a fixed set of application threads (for example, RFC sender channel, File adapter channels). This may require a higher number of application threads. Therefore, within the J2EE Engine configuration (configtool or Visual Admin), go to:
Global Configuration -> Server -> Kernel -> ApplicationThreadManager
Set the MaxThreadCount property to 300</i>
Not sure if this is the exact property but this is sure worth giving a shot.
Regards
Bhavesh -
How to check Internal, Concurrent Manager status in Oracle Apps R12 from fr
Step by step how to check Internal, Concurrent Manager status in Oracle Apps R12 from front end and how to start them.
Richa wrote:
Step by step how to check Internal, Concurrent Manager status in Oracle Apps R12 from front end Concurrent Processing - Concurrent Manager Generic Platform Questions and Answers [ID 105133.1]
and how to start them1) Using adcmctl.sh (from the backend)
2) Using Activate button (from the front-end) -- http://docs.oracle.com/cd/E18727_01/doc.121/e12893/T174296T174302.htm#4334248
Thanks,
Hussein -
Disp+work process was down after the Restoreing the backup
Disp+work process is down after the Restore of the backup
s/m configration: windows 2003 server + oracle 10g
The below is the log file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid PRA
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 2928
Thu Apr 07 18:58:10 2011
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2928) [dpxxdisp.c 1231]
shared lib "dw_xml.dll" version 52 successfully loaded
shared lib "dw_xtc.dll" version 52 successfully loaded
shared lib "dw_stl.dll" version 52 successfully loaded
shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Thu Apr 07 18:58:15 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >pwsap_PRA_01 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05C00040, size: 4613144)
DpShMCreate: allocated sys_adm at 05C00040
DpShMCreate: allocated wp_adm at 05C01E28
DpShMCreate: allocated tm_adm_list at 05C065A8
DpShMCreate: allocated tm_adm at 05C065D8
DpShMCreate: allocated wp_ca_adm at 05FCBB70
DpShMCreate: allocated appc_ca_adm at 05FD1930
DpShMCreate: allocated comm_adm at 05FD3870
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06054730
DpShMCreate: allocated gw_adm at 06054770
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 060547A0
DpShMCreate: allocated wall_adm at 060547A8
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Thu Apr 07 18:58:16 2011
J2EE server info
start = TRUE
state = STARTED
pid = 3208
argv[0] = D:\usr\sap\PRA\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PRA\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PRA\SYS\profile\PRA_DVEBMGS01_pwsap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1069
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PRA
argv[7] = -DSAPMYNAME=pwsap_PRA_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PRA\SYS\profile\PRA_DVEBMGS01_pwsap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
***LOG Q0K=> DpMsAttach, mscon ( pwsap) [dpxxdisp.c 11414]
DpStartStopMsg: send start message (myname is >pwsap_PRA_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Thu Apr 07 18:58:17 2011
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Thu Apr 07 18:58:42 2011
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1472
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1085) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3208)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Apr 07 18:58:56 2011
ERROR => W0 (pid 3216) died [dpxxdisp.c 14021]
ERROR => W1 (pid 3224) died [dpxxdisp.c 14021]
ERROR => W2 (pid 3232) died [dpxxdisp.c 14021]
ERROR => W3 (pid 3240) died [dpxxdisp.c 14021]
ERROR => W4 (pid 3248) died [dpxxdisp.c 14021]
ERROR => W5 (pid 3256) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 3264) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 3272) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3280) died [dpxxdisp.c 14021]
ERROR => W9 (pid 3288) died [dpxxdisp.c 14021]
ERROR => W10 (pid 3296) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 3304) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 3312) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 07 18:59:06 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Apr 08 01:59:06 2011
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3216 Ended no 1 0 0
1 DIA 3224 Ended no 1 0 0
2 DIA 3232 Ended no 1 0 0
3 DIA 3240 Ended no 1 0 0
4 DIA 3248 Ended no 1 0 0
5 DIA 3256 Ended no 1 0 0
6 UPD 3264 Ended no 1 0 0
7 ENQ 3272 Ended no 1 0 0
8 BTC 3280 Ended no 1 0 0
9 BTC 3288 Ended no 1 0 0
10 BTC 3296 Ended no 1 0 0
11 SPO 3304 Ended no 1 0 0
12 UP2 3312 Ended no 1 0 0
Dispatcher Queue Statistics Fri Apr 08 01:59:06 2011
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Fri Apr 08 01:59:06 2011
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Apr 08 01:59:06 2011
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 07 18:59:11 2011
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >pwsap_PRA_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPAREDtrc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Apr 07 18:58:16 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno 01
M sid PRA
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 52
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3216
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3216) [dpxxdisp.c 1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3954072 (19672)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1452)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05C00040, size: 4613144)
M DpShMCreate: allocated sys_adm at 05C00040
M DpShMCreate: allocated wp_adm at 05C01E28
M DpShMCreate: allocated tm_adm_list at 05C065A8
M DpShMCreate: allocated tm_adm at 05C065D8
M DpShMCreate: allocated wp_ca_adm at 05FCBB70
M DpShMCreate: allocated appc_ca_adm at 05FD1930
M DpShMCreate: allocated comm_adm at 05FD3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06054730
M DpShMCreate: allocated gw_adm at 06054770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060547A0
M DpShMCreate: allocated wall_adm at 060547A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Apr 07 18:58:17 2011
M ThInit: running on host pwsap
M
M Thu Apr 07 18:58:18 2011
M calling db_connect ...
C Prepending D:\usr\sap\PRA\DVEBMGS01\exe to Path.
C
C Thu Apr 07 18:58:27 2011
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@PRA on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Attaching to DB Server PRA (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C
C Thu Apr 07 18:58:28 2011
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=061A3EC8,srvhp=061B5794)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@PRA on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Attaching to DB Server PRA (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=061A3EC8,srvhp=061B5794)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1403]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10019]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *
M * LOCATION SAP-Server pwsap_PRA_01 on host pwsap (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 07 18:58:28 2011
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10204
M * COUNTER 1
M *
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3216) [dpnttool.c 327] -
Hi,
In R12, if i bring down services adstpall.sh, there are some concurrent managers and processes still running even after 15 minutes.
I used to kill them.
Is there a better way ? do I have to run cmclean.sql or bounce the database after killing processes?
Thanks.appsdba_new wrote:
Hi,
In R12, if i bring down services adstpall.sh, there are some concurrent managers and processes still running even after 15 minutes.
I used to kill them.
Is there a better way ? do I have to run cmclean.sql or bounce the database after killing processes?
Thanks.
Why do you have to kill those processes?
If you need to kill those processes, then you also need to kill the database sessions associated with it -- Concurrent Processing - How to Find Database Session & Process Associated with a Concurrent Program Which is Currently Running. (Doc ID 735119.1)
Running cmclean.sql script may not be required here but there is no harm in running it.
Thanks,
Hussein -
Help: Concurrent Processing Java Method every certain Time Interval
Hello, I am creating a program to access a database after adding items to cart via UPC code. When adding items, the program accesses the database to get product name and price. The program needs to have functionality for when the database is down. In this instance, the main program will store all UPC codes in a temporary Array List of integers, and once connection is reestablised, reference all these items from the database and add them to the main program (showing name and price). I need help with a method to be invoked when connection originally goes down. This method needs to check for database connectivity every 10 seconds until connection is reestablished so that all items can be dumped from temporary Array List to database for retrieval. What can I use for concurrent processing to have a method running in the background to check for connectivity every 10 seconds (while allowing user to continue adding items to cart). I have messed with the thread.sleep( ) but I am left with no other functionalities (program freezes) when the waitForConnection( ) loop method is invoked. What can I use? Thanks for your input everyone.
Message was edited by:
Getzum4u2What's wrong with java.util.Timer and java.util.TimerTask?
-
High Load on Concurrent Processing node
Hello :
version :11.5.10.CU2 / Linux -86
Recently I have started to notice that my concurrent processing node is loaded heavily between 3.00 AM to 6.00 AM and the load is normal. I need to find out the root cause of this spike. Is there a log that I can look for in concurrent processing node that will give me a clue.
Regards,
BalaLook at the longest running requests during that time, then enable sql trace so you can start to tune them, or work with Oracle Support if they are standard programs running with suboptimal execution plans.
SELECT CR.REQUEST_ID "Request", U.USER_NAME "User", CP.USER_CONCURRENT_PROGRAM_NAME "Program",
TO_CHAR(CR.REQUESTED_START_DATE,'DD-MON-YY HH24:MI:SS') "Requested Start",
TO_CHAR(CR.ACTUAL_START_DATE,'DD-MON-YY HH24:MI:SS') "Actual Start",
ROUND((CR.ACTUAL_COMPLETION_DATE-ACTUAL_START_DATE)*24*60*60,0) "Duration (sec)",
ROUND((CR.ACTUAL_COMPLETION_DATE-ACTUAL_START_DATE)*24*60,2) "Duration (min)",
CR.PHASE_CODE "Phase", CR.STATUS_CODE "Status", CR.ARGUMENT_TEXT "Arguments"
FROM FND_CONCURRENT_REQUESTS CR,
FND_USER U,
FND_CONCURRENT_PROGRAMS_TL CP,
FND_RESPONSIBILITY_TL R
WHERE CR.REQUESTED_BY = U.USER_ID
AND CR.PROGRAM_APPLICATION_ID = CP.APPLICATION_ID
AND CR.CONCURRENT_PROGRAM_ID = CP.CONCURRENT_PROGRAM_ID
AND CP.LANGUAGE='US'
AND CR.RESPONSIBILITY_APPLICATION_ID = R.APPLICATION_ID
AND CR.RESPONSIBILITY_ID = R.RESPONSIBILITY_ID AND R.LANGUAGE='US'
AND (TO_CHAR(CR.ACTUAL_START_DATE,'DD-MON-YYYY HH24:MI') BETWEEN '30-JUN-2011 03:00' and '30-JUN-2011 06:00')
ORDER BY ROUND((CR.ACTUAL_COMPLETION_DATE-ACTUAL_START_DATE)*24*60*60,0) DESC -
Cant get my wIPS service running...
Running 24 controllers( 4400s and wisms) , ver 6.0.188 using WCS ver 6.0.170 with 800+ 1140 access points
Just installed an MSE 3310, WCS sees it and knows what it is.
I cant seem to get the wIPS service to come up... status on WCS ( and MSE) is "admin status enabled" .."operational status down"
Is there another step/trick to get it running ?
ThanxThanks Nael,
MSE ver = 5.2.91
WCS ver = 6.0.170
stopped service via msed stop
grep for any msed processes.... none shown
started service via msed start
echos back with the attached file output
Starting MSE Platform
Type: NAME Value: Chassis
Type: DESCR Vlaue: Cisco 3310 Mobility Services Engine
Type: PID Value: AIR-MSE-3310-K9
Type: VID Vlaue: V01
Type: SN Value: < removed>
Starting MSE Platform, waiting to check the status
Starting MSE Platform, waiting to check the status
Starting MSE Platform, waiting to check the status
MSE Platform is up, getting the status
Unable to get MSE status. Retrying status fetch -
Unable to get MSE status. Retrying status fetch -
Unable to get MSE status. Retrying status fetch -
"getserverinfo" returns the same output -
Any script included in the system to check all major processes/status?
Hi,
I have ebs R12.1.1 running, and I have a question regarding to the script availability.
For example, I can see that there are several scripts for each services controls under $INST_TOP/admin/scripts like adopmnctl.sh, concurrent manager, apps listener, web server, form server and other scripts...
But, is there any script which lists more on system status of major services with one command?
adopmnctl.sh shows 4 services like OC4J related and HTTP server.
But, I expected a bit longer list. :) And I also heard there was such a script in 11i....
Does anyone know about it?
Thanks,
SHAll the scripts can be found under the same directory mentioned above by you.
Not sure what other major processes/status you are looking, so please elaborate more.
You may also see these docs.
Maintaining Oracle Applications Documentation Set
http://download.oracle.com/docs/cd/B53825_03/current/html/docset.html
Script to find Apache, Java, JRE, Forms version for Oracle E-Business Suite R12 [ID 468311.1]
Thanks,
Hussein -
Processing Status on Sales Order
I am configuring in SAP R/3 a Free Third Party Sales Order . . . The problem I am having is with the Processing Status area . . . specifically the Overall Status for the Header and the Item. With the new set up neither of those fields show on the sales order, and so the order does not show up on VA05 as open when first entered. What would need to be done in configuration for these fields to be on the sales order, and to show the appropriate status?
Update . . . The only way so far I have found to have these fields show on the sales order is by using the Completion on the item category, but from what I am reading it is not the suggested way to do it, yet the only way so far to get it on there. And, the problem here is when in MIRO the PO on the Free Third Party Order, it does not complete the Sales Order Header or Item, so I still am unable to get the status to change.
Any ideas?
Edited by: Diane Thacker on Aug 4, 2009 9:41 PMHi,
Per standard process, the sales process will not complete unless the billing has been done for the sales order.
What this means is once MIRO is done, the sales order is eligible for billing. You must complete the billing, so that the sales order wont appear in the VA05 list. Until billing is completed, the sales order status remains open.
Regards -
Hi gurus,
Where we check the sale order processing status configuration ?
Regards,
T.MuruguDear Murugu
If you see the document flow of the particular sales document, you can see the status.
If you want to know where the control is, go to VTLA, for the combination of your order type and delivery type, select your item category and execute. There you can see a field Update document flow. You have to check this box for status updation.
thanks
G. Lakshmipathi
Maybe you are looking for
-
In need of a new laptop for a small business
We have a small business that runs quickbooks on a desktop we are looking for a laptop that will be able to run quickbooks and go online. But I have no idea what to look at. I do not want all the bells and whistles. Does anyone have an idea of what I
-
Help! I have an iMac 24" OSX version 10.6.8. My iphoto is having problems. It will not open properly. All I get is the little wheel going around and around. My iphoto is: iphoto'11 version 9.2.3(629.52). What do I need to do to remedy this?
-
Hi I have posted lot many threads for this problem but I am not getting the answer.Even I am not finding threads available for the same problem. My problem is: I have a function module which executes a report at backend and conve
-
Dear All, Here at client place stock transfer from company code to company code to be done. There are two company codes one is company code A & company code B. Raw materials procured by company code A and delivery address is given of company code B
-
Client no longer available on CRM System
Hi Gurus, I recently did a client copy(200) on the CRM system so I can have Client 100 for BI reporting. I started encountering errors when I tried to run TX RSA1 ( Logical System name change) I then removed the logical name in Client 100 and used TX