Concurrent Program ends in Error without any error message - Apps 11.0.3

Hi,
We have a concurrent program which errors out sometimes without any error message in log file or anywhere else. This happens intermittently. Is there anyway to see why this happens ( to see error message somewhere else - like FND tables ?). Any feedback is appreciated. This happens in Oracle Apps 11.0.3.
thanks
Ram

Ram,
Is this a custom or standard concurrent program?
Was this working properly before? If yes, what changes have been done recently?
Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
Regards,
Hussein

Similar Messages

  • PO Approval stuck in error without any Error message

    Hi All,
    we have few notifications for PO Approval where they are stuck in error without any error message. they are also not showing in the worklist of the approver nor in the wf_notifications table. please help on this on how to solve this. we have done various options to solve the issue like skip/rewind/suspend/retry. but none of them works..... below is an extract of such an notification -
    Error in Workflow POAPPRV/3112-127925
    From SYSADMIN
    To Das, SD
    Sent 12-Dec-2011 16:55:01
    Closed 12-Dec-2011 17:07:30
    ID 164593
    Responder Das, SD
    An Error occurred in the following Workflow.
    Item Type = POAPPRV
    Item Key = 3112-127925
    User Key =429766-245
    Error Name =
    Error Message =
    Error Stack =
    Activity Id = 10770
    Activity Label = ROOT:POAPPRV_TOP
    Result Code = #STUCK
    Notification Id =
    Assigned User =
    Thanks,
    Sam D
    Edited by: Sam D on 12 Dec, 2011 1:45 PM

    Please post the details of the application release, database version and OS.
    Can you find any errors in the Workflow log file?
    All Purchase Orders or Requisitions Getting Stuck in Pre-Approved or In Process Status - Troubleshooting Checklist [ID 1104843.1]
    Troubleshooting for Requisitions / Purchase Orders in Process or Pre-Approved Status [ID 225017.1]
    Also, search MOS for (POAPPRV stuck) and go through the docs.
    Thanks,
    Hussein

  • Weird error without any error message

    I've been working on some actionscript 3 system. And all of a
    sudden, it wouldn't execute anymore. When I pushed CTRL-Enter in
    Flash CS3, a white screen would open up (instead of the normal
    flash program) and no trace-output would be given.
    Three hours later I found the cause of this weird problem.
    It's (simplified) the line:
    var value:Number = -(true ? 1 : 0); // This one doesn't work.
    Put this line in your script, and your entire program won't
    execute. And without any error message! I was wondering, why is
    that? By the way, the following lines do work:
    var a:Number = -(2*3+4); // Gives -10.
    var b:Number = (true ? 1 : 0); // Gives 1.
    var c:Number = -b; // Gives -1.
    var d:Number = 0-(true ? 1 : 0); // Gives -1.
    var e:Number = -((true ? 1 : -1) as Number);
    So, my guess is that the code (true ? 1 : 0) gives some sort
    of data type which is not a Number, and therefore doesn't except
    minus signs. But that wouldn't explain why it doesn't even give an
    error. So what IS wrong with it?

    ok - well if these numbers are used to begin the execution of
    a method in your file, it's likely that they are not firing up
    because the syntax here is incorrect. in order to use this type of
    conditional operator (which i do use quite often as well, handy
    convenient ;) the structure should be:
    var value:Number = (condition) ? 1 : 0;
    'true' is not a 'condition' but a boolean result, so it
    should not be evaluated in the way have been using it here -
    however 'true' is 'true' so the result will always be 1 (the first
    expression in the operator) - i'm not certain why you would need a
    -0 result and if you are always wanting a 'negative' number then
    use that number in the return expression, as in:
    var value:Number = (condition) ? -1 : 0;

  • Inventory Transaction Worker erroring without any log messages.

    Hi,
    When I try to run Inventory Transaction Worker, it is erroring out without any log/output messages. In metalink, it has been mentioned that when there are any garbage characters in the input data, it errors out.
    I checked the input data also. It seems to be fine.
    Could any of you please help me in this regard???
    Thanks.

    HI
    EBS - 11.5.10.2
    OS - AIX 5.3
    This was working fine before and working fine in PROD.issue is in cloned instance
    Initaillial I was getting following error
    This concurrent manager cannot run the following registered, immediate
    concurrent programs because they are not linked to this concurrent
    manager's library "INVLIBR"
    Cause: The immediate concurrent programs listed have been registered
    th
         Application Concurrent Program
              INV INCDCM
              BOM CMCCTM
    Followed the note you provided and started getting error as mentioned in pervious post.
    Now I am not able to add WICTWS to lib 'INVLIBR' as its of PL/sql type executable
    Thanks

  • Photoshop cs2 crashes and reboot windows xp without any error message when I try to open a file

    Hi,
    I downloaded the trial version (assessment for thirty days) of Adobe Photoshop cs2. Once installed the trial version, the program works correctly, except for a basic function: to open files and modify them. Any image files (jpeg-gif-png-tiff-bmp-psd) on press command FILE>OPEN, or Ctrl+O, to open it, sends the system in crash, and without any warning message, send to "restart" the operating system, in my case , windows xp.
    I use also photoshop cs, and it works correctly and allows to open file image also; but not with cs2.
    What's the problem?

    The error message I see in a Event Viewer after the program crashed is the following:
    Event Type: Error
    Event Source: Userenv
    Event Category: None
    Event ID: 1041
    Date: 22/03/2009
    Time: 09:05:52
    User: NT AUTHORITY\SYSTEM
    Computer: PENTA
    Description:
    Windows cannot query DllName registry entry for
    {CF7639F3-ABA2-41DB-97F2-81E2C5DBFC5D} and it will not be loaded. This is most likely caused by a faulty registration.
    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.

  • What software can be use to update iphone 3g 4.2.1 to iOs 4.4.4 without any error occuring...???

    what software can be use to update iphone 3g 4.2.1 to iOs 4.4.4 without any error occuring...???

    Ah...there is no iOS 4.4.4, & iOS 4.2.1 is the end of the line for your phone. There are no further updates available.

  • Install exit after directory choose without any error

    installation of Q2 30 trial exit after I choose the directory ( I try to use either default directory or my own directory), the installation program exit without any error.
    I create a file creator-2004q2-windows-en.sp or Creator-ea-windows-en.sp with is.debug=1, but still no install.log. how to deal with this.

    Given the archive name, the platform is windows.
    This sounds like a bad download.
    -Alexis

  • Propagation Queue hanged without any error.

    Hi All,
    We have bi-directional replication using streams on 10g database.Last night propagation process hanged without any error in any of the queue.
    We tried to restart it but propagation queue didnt stop.It just went into infinite loop.
    Finally we have to kill the session.Then we restarted the database and everything worked fine.
    Just curious what happened there is no error so far neither in the queue nor in alert log/trace files.
    Please help!!!
    Thanks for all your help!!!
    Kind Regards
    Rahul

    There is insufficient information here to help you.
    If you have not patched to 10.2.0.4 that might be something to put on your radar sooner rather than later.

  • I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

    I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
    I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
    Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
    Do you have any suggestions?
    Thanks, Jack

    Hi Jack, great help so far!
    Internal...
    http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
    External be sure it's Firewire & not Bus powered...
    http://eshop.macsales.com/shop/firewire/optical-drives/

  • Hello I Download Adobe Photoshop CC 2014 Last Night i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message I Need Help Can You Resolve This Problem i Tried Creative Cloud Sign Out Nd Sign iN But iT DidnT ReSolve My

    Hello I Download Adobe Photoshop CC 2014 Last Night
     i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
    I Need Help Can You Resolve This Problem

    Lotfi are you receiving any error messages during the installation?  I would recommend reviewing your installation logs for errors.  Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.  You are welcome to post any specific errors you discover to this discussion.

  • Nokia Store Quits without any error messages.What ...

    My inbuilt Nokia store application within my Nokia Asha 305 keeps quiting without any error messages.What do i do to resolve this.I recently updated the S40 OS could that be the reason. And why?

    Just reset it to factory. That worked for me

  • Extract abends after sometime without any errors in logs

    Hi Folks,
    I am implementing unidirectional simple replication for one schema (DDL & DML) without GG data pump and I am newer to GG.
    Extract abends after sometime without any errors in logs. I doubt I did not configure exttrail/rmttrail properly.
    What should be the commands to configure trails in this scenerio ?
    Any suggestions ?
    Regards
    Edited by: LazyDBA11g on Aug 22, 2012 1:00 AM

    Thanks Paddu for reply but I can not use DBLOGREADER as it is not compatible in my env
    Use the TRANLOGOPTIONS parameter with the DBLOGREADER option in the Extract parameter file if the ASM instance is one of the following versions:
    Oracle 10.2.0.5 or later 10g R2 versions
    Oracle 11.2.0.2 or later 11g R2 versionsLastly I dont have connectivity issue with ASM.
    Regards
    Edited by: LazyDBA11g on Aug 22, 2012 1:03 AM

  • Web service hangs without any errors and exceptions

    hi all,
    We have a ejb application web service that is binded with shedular bc to trigger for every 2 hours
    and it runs for one and half hours making continous transactions with database..
    In the web service a outer for loop will be iterated by fetching list of data from database. And this list will be iterated in the inner for loop.
    This logic works fine for sometime, but suddenly after some random period of time without any errors and exceptions the outer for loop gets no list from database
    and the inner for loop is never executed and the web service completes processing.
    This i can able to see form my log files.
    i dont understand why the list is not fetched from the database, is the problem with hibernate or it lost the connection with database,
    either case it has to throw exception but the service is not.
    otherwise does this is garbage collector issue.
    Thanks in advance,
    Bye

    Without any code to see what's going on we'd be flying blind trying to answer this one.

  • OBIEE 11.1.1.6 installation hangs without any error or warning

    Hi all,
    I'm trying to install OBIEE 11.1.1.6 on a previous 11.1.1.5 installation, on Windows Server 2003 Enterprise Edition. I followed the instructions on the "Oracle® Fusion Middleware Upgrade Guide for Oracle Business Intelligence 11g Release 1 (11.1.1)" manual, "Moving from 11.1.1.3 or 11.1.1.5 to 11.1.1.6" paragraph.
    All checks give positive result but then installation hangs without any error or warning. I tried 3 times with the same behaviour.
    Any suggestion? Anyone having similar problems?
    Thanks in advance,
    Cristina

    The only error I get (in the Windows application event viewer) is:
    [nQSError: 12002] Socket communication error at call=recv: (Number=10054) An existing connection was forcibly closed by the remote host
    Any suggestion?
    Thanks,
    Cristina

  • Imac shuts down without any error message

    imac shuts down without any error message

    Need more details. Which iMac? Which OS? When does it shut down, under what circumstances? What are you doing when it happens? Is it reproducible, i.e. can you make it happen? Does it appear to be getting very hot before it shuts down?
    Open Console in Applications>Utilities and navigate to system.log. Do you see any messages related to shutdown from the time when this has happened? Enter "shutdown" in the filter field, upper right corner.

Maybe you are looking for

  • Facing problem in .doc to .chm conversion esp with External Map Id file

    Hi...I'm a new user to RH-Word. I need to create .chm file from a .doc file (earlier we used to use .hlp). Is it correct that i need .cnt (for TOC) and .hlp files as well for the conversion? If not, then how can i do it with the .doc file ONLY? Secon

  • Bright white spot in ipad 3

    I am seeing a bright white spot on my ipad3 screen, it is very much visible in white pages, but not so much in black. Looks like a hardware problem. I purchased my ipad3 on day it was launched, and using it for almost 6 months now. Is it still covere

  • IPhoto Export with Automator

    Is it possible to make a Automator workflow using the export menu in iPhoto. The reason for this, would be to be able to resize photos using a simple workflow using Automator.

  • SimpleDateFormat.toLocalizedPattern()

    Howdy Folks? I'm using the following: - SimpleDateFormat sdf1 = new SimpleDateFormat(); System.out.println( sdf1.toLocalizedPattern() ); SimpleDateFormat s1 = new SimpleDateFormat( sdf1.toLocalizedPattern(), Locale.getDefault() );The print out gives

  • Toolbar visibility button (lozenge)?

    greetings, just transitioning from 10.6 to 10.7.  many subtle surprises, not all of them good... this is driving me nuts.  where has the "show/hide" toolbar button or lozenge gone in the title bar in 10.7?  on MBPro, screen real estate is still a val