Concurrent Service start but stop at once

I just install a Oracle Application is vision mode , but there is a problem in Concurrent service , when I power on the Oracle Application Server , the Oracle application can start in normal , but the Concurrent Service can not start, I had start it in manual , It can startup for a while and stop , I repeat serval times to do this , the result is the same,
Is there anyboay can tole me how to fixed it ? tks!

Hi, I had check the Concurrent Service's Log , it show as following :
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 27-APR-2006 23:13:28 -
Shutting down Internal Concurrent Manager : 27-APR-2006 23:13:28
List of errors encountered:
_ 1 _
Concurrent Manager cannot find error description for CONC-System Node
Name not Registered
Contact your support representative.
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
how can I do next ?

Similar Messages

Apple mobile device service started and stopped

my iPod touch cant be synced or even recognized on my iTunes and it says i gotta *start the apple mobile device service*.
i finally found it and it tells me that *"apple mobile device service started and stopped..."*
how can i fix it?
help!!!!

Hello and Welcome to Apple Discussions.
Follow the instructions in this article:
http://docs.info.apple.com/article.html?artnum=307078
mrtotes

I am getting a service start and stop alert while doing the windows server updates.

HI
I am getting a service start and stop alert while doing the windows server updates. Services are wmiApSrv , WPDBusEnum. Can you please help me to under stand why i am getting the service start and stop alert.
Thanks & Regards
Abhilash K Joy

Hi,
The WMI Performance Adapter (wmiApSrv) service provides performance library information from Windows Management Instrumentation (WMI) providers to clients on the network. This service only runs when Performance Data Helper is activated.
This service is installed by default and its startup type is Manual. When started in the default configuration it will log on using the Local System account.
You can try troubleshooting the issue using Clean Boot to check if the issue is related to third-party software.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135/en-us
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

JBoss Starts but Stops Immediately

All
I am trying to do a turnkey installation of LiveCycle 8.2.1 with JBoss yet when I run the Configuration Manager, and at the point at which JBoss gets started, the Configuration Manageer stops stating that it failed to start JBoss.
When I go into Windows Services and manually try to start JBoss, it starts but immediately stops.
Any ideas?

Are you able to launch JBoss from the .bat file in the JBoss/Bin directory?
Try that, You may need to adjust the size parameters for JAVA_OPTS.
I have a laptop with 2 Gig of memory, and ended up with these settings;
set JAVA_OPTS=%JAVA_OPTS% -XX:PermSize=256m -XX:MaxPermSize=256m -XX:NewSize=250m -XX:MaxNewSize=250m -XX:SurvivorRatio=6 -Xms512m -Xmx512m.
Once you get JBoss to run from the .Bat file, you will need to apply the settings for PermSize, etc. to the JBoss service by editing the settings in your registry.
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\JBoss for Adobe LiveCycle ES\Parameters
Good Luck
Mark

Windows service start and stop automatically

i'm trying to start windows service, which i installed via running beasvc with parameters. everything used to work fine, but yesterday somthing broke up: i press the start button in the control panel, service tries to start, but then it stops and the following message appears: "Weblogic 9.0 Workspace Service service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service." sometimes it stops right after starting without giving any messages.
any ideas what's wrong with it&

If I run from a cmd box it shows a successful start, however when I look at the services through the MMC it is not started. Basically, it starts successfully and then immediately shuts off stating the message in the original post. This is after and only after I apply sp7 for BEA 7. If I roll the server back to just v 7, I don't have a problem. I have downloaded V7 twice, and I get the same result. I have followed the install instructions to a T and still the same result. I have also tested removing the user created pages, and I get the same exact error telling me either it's a generic error or, SP7 has issues. The only reason we are rolling to SP7 is because of a security issue, but for the time being we have locked down the firewall. Any other suggestions? I have had my Maximo Administrator contact BEA, and MRO about this problem (Maximo is the only system we use web logic for) and they default to the answer that it is a java issue. That V7 is not supported above java 1.3.xxx which is bull because we were running version 1.4, due to a security issue with JVM 1.3 and all worked well. I have replicated the install with JVM 1.3xxx for BEA 7 sp 7, and that did not solve the problem either. Sorry for the long post I just wanted to try to get all the info out.
Thank you for you time and consideration
Tanner

Oracle 10.2G - windows service started but instance is in nomunt mode

Hello
I have trouble with oracle 10.2G in windows 2003...
I run following command:
oradim.exe -startup -sid sid_name -usrpwd pass -starttype srvc,inst
After above command, windows service has status "started", but instance is in nomunt mode.
In alert.log I don't see any error...
Thanks for any help.
Regards

in oradim.log I found following error:
Tue Dec 18 05:00:02 2007
ORA-01017: incorrect username/password; logon refuse
but I don't change any password...
This is my alertlog:
Tue Dec 18 05:00:01 2007
ORACLE V10.2.0.2.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows Server 2003 Version V5.2 Service Pack 1
CPU : 4 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1468M/2047M, Ph+PgF:3527M/3947M, VA:1940M/2047M
Tue Dec 18 05:00:01 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as D:\oracle\ora102\RDBMS
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
resource_limit = TRUE
shared_pool_size = 209715200
shared_pool_reserved_size= 20971520
trace_enabled = FALSE
nls_language = POLISH
nls_territory = POLAND
nls_sort = POLISH
sga_target = 838860800
control_files = D:\ORACLE\ORA92\DATABASE\CONTROL01.CTL, D:\ORACLE\ORADATA\TETA\CONTROL02.CTL
db_block_size = 8192
compatible = 10.2.0
db_files = 100
db_file_multiblock_read_count= 8
fast_start_mttr_target = 0
undo_management = AUTO
undo_tablespace = ROLLBACK_DATA
O7_DICTIONARY_ACCESSIBILITY= TRUE
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = TETA
session_cached_cursors = 100
job_queue_processes = 5
parallel_min_servers = 0
parallel_max_servers = 0
background_dump_dest = D:\ORACLE\ADMIN\TETA\BDUMP
user_dump_dest = D:\ORACLE\ADMIN\TETA\UDUMP
core_dump_dest = D:\ORACLE\ADMIN\TETA\CDUMP
db_name = TETA
open_cursors = 2048
star_transformation_enabled= FALSE
pga_aggregate_target = 157286400
workarea_size_policy = AUTO
aq_tm_processes = 1
PMON started with pid=2, OS id=291912
PSP0 started with pid=3, OS id=142740
MMAN started with pid=4, OS id=656244
DBW0 started with pid=5, OS id=652136
LGWR started with pid=6, OS id=755832
CKPT started with pid=7, OS id=226276
SMON started with pid=8, OS id=661212
RECO started with pid=9, OS id=467040
CJQ0 started with pid=10, OS id=157796
MMON started with pid=11, OS id=249832
MMNL started with pid=12, OS id=795116
Tue Dec 18 05:00:02 2007
Oracle Data Guard is not available in this edition of Oracle.
Regards

How to create services start and stop automation script for diff servers

Hi All,
i want to create a bat file for automation purpose to start and stop services
i have some services in 1st server aand some in 2nd server and some in 3rd servers.
has you all know i have to follow sequences to start and stop services can any help me in creating .bat by linking 3 servers fo starting and stoping services.
Thanks in advance
Regards
SM

Hi,
this is the list of start oder for services in 11.1.2.1 from the Installation and Configuration Guide
1. Databases for repositories.
2. Any corporate user directories that you plan to configure for use with Shared Services.
3. Foundation Services Managed Server application server, which includes Shared Services,
and EPM Workspace.
4. Reporting and Analysis Framework — Agent Service (if required for your environment)
5. Reporting and Analysis Framework Application Server (if required for your environment)
6. Web server
The remaining services and processes can be started in any order:
1. Performance Management Architect Services
2. Performance Management Architect application server
3. Performance Management Architect Data Synchronizer application server
4. Essbase Server
5. Administration Services application server
284 Starting and Stopping EPM System Products
6. Integration Services Server
7. Essbase Studio Server
8. Provider Services application server
9. Financial Reporting Services
10. Financial Reporting application server
11. Web Analysis application server
12. Calculation Manager application server
13. Planning application server and the Hyperion RMI Registry
14. Financial Management service
15. Financial Management Web application server
16. Strategic Finance service
17. Performance Scorecard application server
18. Performance Scorecard Alerter application server
19. Profitability and Cost Management application server
to start services on different servers you can use the sc command in your batch file
for eg
sc \\10.121.201.21 start HypS9FrameworkAgent

Apple Mobile Device Service started then stopped

AMDS will not run !Error The AMD Service on Local Computer started then stopped. Some stop automatically if they are not in use by other services or programs. This came with 10.2 errors. I uninstalled iTunes 10.2 and installed 10.1.2.17 still have slow iTunes and it refuses to see device(iPhone) connected. What can I do now??????

This is NOT 100% correct while AMDS did run Devices still not detected. I had to Remove Apple Device Support and install AMDS from 10.0.1 Voila!! iTunes appeared in a FLASH and My IPHONE was therre and working. !Apple Error "iTunes was unable to load data class informaton from Synch Services. Reconnect or try later." Hey Apple lastest has been no help removeing this error. I can live with that al it takes is a simple click of the box to remove. I Be HAPPy again. No more updates for me I just got to figure out how to stop Auto-notification if I can.

Systemd / services start but do not listen to interfaces

Hello,
In the course of migrating from initscripts to systemd (mixed systemd/sysvinit/initscripts), I am facing a strange behaviour with some services: squid, bind (named), dhcpd which start normally but do not listen to the useful interface. For instance, for named, netsat does not show 192.168.42.2:53 (which is is my LAN interface), despite the process is running (systemd status named). It seems that with systemd there is a change to the way available interfaces are reported to the services (for those services, I have not explicitly configured the interface to listen to).
If I revert back to initscripts only (removing init=/usr/lib/systemd/systemd from the kernel argument) everything is OK.
I am not running NetworkManager (relevant ?), my rc.conf is clean apart that I am still using the deprecated syntax (I need a bridge interface that NetworkManager cannot handle).
eth0="dhcp"
eth1="eth1 promisc"
br1="br1 192.168.42.2 netmask 255.255.255.0 broadcast 192.168.42.255"
INTERFACES=(eth0 eth1 br1)
Thanks for any help.

mrechte wrote:
I found the cause of the problem: legacy network service starts too late, after some other network daemons which do not see yet the interfaces.
I switched to netcfg and dropped network.
Seems to be OK now.
Glad you found the problem. Would you please edit your first post and mark as "Solved" so others searching for this will see it?

NAC AD-SSO service started but client isn't doing SSO

Hi All,
We have NAC version 4.7(1) and we integrated it with Domain Controller on windows 2008. The integration is done and the service is started but the client (XP machine) access the domain without doing SSO then NAC Agent (Ver. 4.7.1.511) appears to start login with local DB only (there's no any other options rather than Local DB).
All Ports are opened to DC and CAS is listening to port 8910.
I attached some snapshots from NAM configuration.
One more thing, sometimes this error appears on NAC Agent "Invalid switch configuration-OOB Error:OOB client 00:17:42:BE:F3:CB/172.20.10.20 not found. Please contact your network administrator." what does this error mean?? Although i can connect the same client machine to another port and it's working properly.
Thanks in Advance,

Hi Faisal,
i have run the following "KTPASS.EXE -princ newadsso/[email protected] -mapuser newadsso -pass PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL -crypto All" and the output was
Targeting domain controller: DC01.DOMAIN.COM
Successfully mapped newadsso/domain.com to newadsso.
Password succesfully set!
Key created.
Key created.
Key created.
Key created.
Key created.
Output keytab to c:\newadsso.keytab:
Keytab version: 0x502
keysize 53 newadsso/[email protected] ptype 1 (KRB5_NT_PRINCIPAL) vno 3 etype 0x
1 (DES-CBC-CRC) keylength 8 (0x9be5c252a85d080b)
keysize 53 newadsso/[email protected] ptype 1 (KRB5_NT_PRINCIPAL) vno 3 etype 0x
3 (DES-CBC-MD5) keylength 8 (0x9be5c252a85d080b)
keysize 61 newadsso/[email protected] ptype 1 (KRB5_NT_PRINCIPAL) vno 3 etype 0x
17 (RC4-HMAC) keylength 16 (0x554e28e96389c80c975cc6f96b75fd92)
keysize 77 newadsso/[email protected] ptype 1 (KRB5_NT_PRINCIPAL) vno 3 etype 0x
12 (AES256-SHA1) keylength 32 (0xcfc491228d9864ab4a5a0424b78b0178a686a8e1aa4ad2e
fa95890da6361006d)
keysize 61 newadsso/[email protected] ptype 1 (KRB5_NT_PRINCIPAL) vno 3 etype 0x
11 (AES128-SHA1) keylength 16 (0xcb99b6a0e424f312b5c804d5941b04d7)
and when i enabled Agent-Based Windows Single Sign-On with Active Directory the following appeared:
Error : Could not start the SSO service. Please check the configuration. although it was enabled and started with DesOnly Command!
Thanks in advance.

HT1529 I have problems to empty the bin. It starts but stops almost immediately

I havwe an Imac and experience problems in emptying the trash bin.
It starts but immediately stops again. What can I do. I actually have 4000 iems in the trash bin

I have been following the instructions but Youtube still has the same problem.
It starts for a few seconds, then the screen gets bigger and it stops showing the
pictures...

Problem installating Snow Leopard on old Macbook Pro with Intel Core 2 Duo. After creating partition on internal hard disk (Extended Journaled), installation starts but stops at half of the progress bar. Screen asking Restart appears.

Hello:
I have tried installing Snow Leopard via the installation disc on a Macbook Pro (2007) with an Intel Core 2 Duo, but I the installation has failed more than 5 times.
I have first formatted and partitioned the internal hard disk with Mac Os Extended Journal format.
Once the installation starts, it starts without a problem unti lthe progress bar gest until half completed then a screen asking for a Computer Restart shows up.
It asks to press the power button for some time until it the computer shuts down and then, press again to turn it on.
Once turned on, the installation disc gets readed, the installation screen appears again and asks again to start the whole installation process form the beginning.

Then you have a Hardware Problem.
Your system is Crashing part way through the install and Re-Booting because of the crash.
Could be the drive itself or it could be some other hardware part in your system. Like the RAM.
To check if it is the internal drive connect an External drive to the system by USB and do the install on that external. If the install completes then it more then likely the drive is bad. If it crashes again then it is more then likely some other piece of hardware in your system.

AD SSO Service Starts, But Client Not Performing SSO

Hi.
I hope someone can help me with this issue.
I have a NAC environment in which NAM and NAS are operating in high availability mode. The NAS is in Out-of-band Virtual gateway mode, and I have configured AD-SSO.
Users in local database (NAM) can authenticate as normally.
My problem is that users can not authenticate via AD-SSO functionality.
The AD-SSO service is up and running, but when a user tries to login into the domain (with the AD credentials), the attempt is unsuccessful and the user gets the NAC agent. For testing purposes, I have allowed data traffic from untrusted side (unauthenticated roll) to the DC domain to any port.
Does any body can help me to find which my problem is?
I have gotten the logs from the command “more /perfigo/access/tomcat/logs/nac_server.log”. I can not see any traffic to port 8910 (but there is traffic to port 8905). Besides, if someone knows where can I find documentation which helps to interpret the logs, I will thanks to share it with me.
I am attaching a document with the details.
I really appreciate your help.
Regards.

Hi Damaso,
For your reference, here is the full procedure of how the CAS should authenticate the user with AD SSO:
1. The user logs in to Windows and obtains a Ticket-Granting Ticket (TGT) from the kerberos Authentication Service on AD.
[here the CAS is not involved]
2. The Agent starts and the CAS instructs the Agent to get a kerberos Service Ticket (ST) for the SSO Service from the AD server.
[here the CAS is involved]
3. The user sends its Ticket-Granting Ticket (TGT) to request the Service Ticket (ST) from the kerberos Ticket-Granting Service (TGS) on AD.
[here the CAS is not involved, as long as all the communications from/to AD are allowed for the unauthenticated role]
This Service Ticket (ST) can be seen through the Microsoft Kerbtray.exe tool.
4. The Agent sends the Service Ticket (ST) to the CAS for the user authentication and role mapping.
[here the CAS is involved]
The Kerbtray.exe tool allows us to display the Service Ticket (ST) obtained by the user from AD, that will then be sent by the Agent to the CAS.
Could you confirm through Kerbtray whether the user is getting the right ST?
http://www.microsoft.com/download/en/details.aspx?id=17657
If a user does not have any Service Ticket (ST) at all there may be an issue with AD (considering the fact that the CAS is already allowing all the traffic to/from AD).
The user may either be unable to send the Ticket-Granting Ticket (TGT) to AD, or it may be unable to obtain the Service Ticket (ST) from AD.
The CAS during this phase is neither performing any actions nor blocking any traffic, since all the communications to/from AD are already fully open in the unauthenticated role.
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Videos start but stop although sound continues

Videos will start along with sound but the video will stop although sound continues.If I move my pointer over the video it will jump to where the progress bar indicates where the video is at it's current playback time.How can I fix this problem?

Let me revise this question.Same problem with YouTube vids on Facebook/YouTube ect as stated above with the problem being video hangups.If I wave my mouse pointer over the video in progress the video proceeds but will stop if I don't wave the pointer over the vid.The vid will load and I can hear audio playback but the image will just stop while the audio is still playing.

Satellite A110-180 - Fan starts but stops after few seconds

Hi,
I have a Toshiba Satellite A110-180 and when I turn on the computer the fan starts running but it stops in a few seconds and starts again in a while and stops again and starts..... Then the laptop gets heat quickly.
I bought the laptop around 5 years ago so I think that the problem is either the fan or the circuit that controls the fan. Can someone that has had the same problem make me sure that the fan is the problem?
The part number of the fan is ATZHG000500. Does anybody know if a fan with P/N ATZHG000100 is compatible with my laptop or if I can use other fan?
Thanks for your help,

Hi Boarder,
Thanks for your quick reply.
I already cleaned the fan 3 days ago because I thought that perhaps that was the reason of the fan running. I installed a program to control the hard drive and CPUs temperature and at the beginning when I turn on the laptop in the morning the temperature is ok, but when I look an email and surf by internet a little bit for 10 min the temperature increase in 10º or more in CPU and hard drive, and the fan is still running in the same way that I commented (in a discontinuous way). So I don't think that it's normal at least theoretically. I also have another laptop and the fan is running all the time.
I'll check about the thermal grease to see if the condition are fine.

Concurrent Service start but stop at once

Similar Messages

Maybe you are looking for