Condensation on trackpad?!?

Ok so a little bit of condensation from my drink got on the trackpad of my MacBook Pro and now it's not working! It usually fixes itself after it dries when this happens but it has been 3 hours and the mouse is just jumping around and unresponsive to my touch. Of course this happens when I have papers to right! Is there a way that an external mouse would work until I can get it repaired? Would I be able to just plug it in and have it work or would it require the trackpad to even start using it? I know nothing about computers so helpppp please!

Kansas lol wrote:
Ok so a little bit of condensation from my drink got on the trackpad of my MacBook Pro and now it's not working! It usually fixes itself after it dries when this happens but it has been 3 hours and the mouse is just jumping around and unresponsive to my touch..
...Is there a way that an external mouse would work until I can get it repaired? Would I be able to just plug it in and have it work or would it require the trackpad to even start using it? I know nothing about computers so helpppp please!
You should be able to use a USB mouse with no problem. My wife uses a Logitech USB trackball in place of the trackpad constantly with no issue. However, if the mouse is jumping around without you doing anything at all, an external pointing device may not fix that. I assume you attempted to carefully mop up the drippings on the trackpad rather than just letting it dry by itself.
This http://support.apple.com/kb/ts1449 might prove helpful. Even more helpful is the inevitable advice that mixing drinks (or any liquids) and laptops in the same location is dangerous so don't do it.

Similar Messages

  • Late 2013 Keyboard / Trackpad still unresponsive AFTER EFI 1.3 update

    I thought I would start a new thread / discussion since the previous thread here seems to be riddled with "install the update" suggestions and off topic assistance such as battery life questions. I have also logged detailed information regarding this issue on my professional blog here.
    Anyway, here is a short, condensed version of my story. I have had two brand new late 2013 Retina MacBook Pro's with the 2.4/16GB/256 configuration. Since the config I chose is a CTO, this problem has been going on since the day the first model arrived (December 10th, 2013). The EFI update was preinstalled on both systems and I can verify that because the boot ROM version is MBP111.0138.B03 (the boot rom prior to the update ended in B00 or B01). I am also an AASP and an ACMT meaning that I am certified and employed with a company that allows me to fix all Apple hardware under warranty. I am well-versed in technology and Apple hardware and I have never seen anything quite like this.
    Here is the quick summary of things I have attempted and I have been able to re-recreate the issue:
    The system will not mount the root device when I boot via a known good external hard drive running 10.9.1. Verbose mode and Single user mode reports a still waiting for root device error.
    The system (rMBP) will not boot from another system (late 2011 MacBook Pro 13") when said system (late 2011 MacBook Pro) pushed into target disk mode via thunderbolt.
    My system, rMBP, will boot up with the internal SSD but will not allow the keyboard and track pad to function. The caps lock key will not illuminate. The keyboard and track pad will work OUTSIDE of 10.9.1, however. I have installed a clean internet recovery version of Mavericks over 4 times.
    If I put my system, rMBP, into target disk mode and connect to any other computer via thunderbolt and boot it on the other Apple systems, the operating system running on the internal SSD of the rMBP will work just fine -- keyboard and mouse included (again, as a target disk mode thunderbolt connection to another host).
    If I use a remote agent to connect to my rMBP such as LogMeIn or vnc, the keyboard and mouse will work just fine from the remote system which leaves me to beleive that this is not a software issue nor is it fully a hardware issue since the keyboard and mouse work outside of mavericks.
    I believe we are still dealing with a firmware issue here. It took several tries to create a bootable device for the late 2013 rMBP since NONE of my other up-to-date and verified working external drives will boot but I finally created a bootable USB stick. When I run the system from the USB stick, the keyboard and trackpad will work but if I touch the keyboard and / or trackpad in 5 second intervals, I will receive the following error:
    1/4/14 4:44:41.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:45:00.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:45:43.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:49:03.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:50:20.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:51:24.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:52:49.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:53:00.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:53:10.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:55:25.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:56:07.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:57:06.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:58:40.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    1/4/14 4:59:45.000 PM
    kernel[0]
    The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)
    I had actually created a system log query to search for the above. The search string includes "the USB " and any entry after 1/1/2014. The above error should only present itself when waking an Apple system from sleep and instead it happens on every touch after, at least, a 5 second period of non-use.
    When I remote into the system using LogMeIn, VNC or even use an application called ShareMouse which shares the keyboard and mouse of my Windows system with any other computer on the network presuming they have ShareMouse also installed, I can use the system as I would expect, without continuous error in the console log. When I check the system information, Bluetooth is completely disabled and the USB hub does not report address information. Since the keyboard, track pad, Bluetooth peripheral and USB ports all sit on the same USB stack / hub this leads me to think there is a firmware / driver failure occurring after Mavericks loads. The only two errors I see when I am using a remote keyboard and mouse via a remote service is as follows:
    1/5/14 6:58:16.000 PM kernel[0]: The USB device HubDevice (Port 1 of Hub at 0xfa000000) may have caused a wake by issuing a remote wakeup (2)
    1/5/14 6:58:16.000 PM kernel[0]: The USB device Apple Internal Keyboard / Track pad (Port 2 of Hub at 0xfa100000) may have caused a wake by issuing a remote wakeup (3)
    Bottom line: Even for those of you who have installed the EFI 1.3 update and have verified that your freezing issues have ceased, for the most part, could you check your console log for the above error. My guess is, you will still see the error repeated there in 5 second intervals if you touch the keyboard, put your hands up for 5 seconds, touch the keyboard and / or track pad again. My concerns is that this is a product line issue since it has occurred on two brand new systems and the log errors appeared on another model on display in an Apple store. (The display model was logged into an Admin account so I took the liberty of checking the console log.)

    I'm tired of this message. Bought a Mac 13" retina from bestbuy that was shipped to me on December 24th. The finder took a long time to load 'All My Files' with three to five second delay. My older macbook unibody (late 2009)was instantaneous. My wife's macbook aluminum (2011) also loaded the files instantaneously. Sorry I digressed but while I was trying to research that issue, I was caught up in the console and multiple of these,'The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)' kept showing up whenever I touched the trackpad in intervals of 6-7 seconds.
    Called up apple, used screen sharing and after spending an hour was transferred to the second tier tech. The second tier rep troubleshooted and told me it WAS an issue and asked me to go to apple store to run diagnostics and that most likely I'll receive another notebook in exchange since it fell within 14 day period. I told him the internet was filled with this discussion and asked if it was prevalent. He said it was the first time he has come across this issue and most forums on the internet may not be addressing my specific issue. I wasn't convinced and simply returned it at best buy.
    The unfortunate thing is I sold my macbook unibody and having owned 2 macbooks for last eight years I caved and ordered another 13". After a week and a half I received it today and guess what, I see the same message filling up my console.
    I noted the following,
    * Use guest account and you'll never see the message,'The USB device Apple Internal Keyboard / Trackpad (Port 5 of Hub at 0x14000000) may have caused a wake by issuing a remote wakeup (2)'. All admin accounts created will throw that error.
    Though off topic I'd like to state what happened with the Finder's 'All my files' issue:
    1. Once I upgraded my older macbook unibody to mavericks, the 'All my files' took longer to load as the new macbook pro.
    2. I was able to replicate the same slow load times with macbook aluminium(2011) when I upgraded it to mavericks.
    Oh, I also showed the slowness to the representatives and all they tried doing was reindex spotlight which did no good.
    So much for 1799$ notebook and the "free" OS. Very disappointed.

  • Blackberry Curve 8520 Trackpad

    Hi, my Curve 8520 recently developed a trackpad problem. Basically, it wouldn't move in ant direction at all. So, I sent it off to Phones4u, hoping they'd fix it, however, the sent it back to me and I was told it had suffered 'water condensation'. And then said it wasn't 'economical' for them to repair it.
    After complaining, I got absolutley nowhere. So I just went to my local mobile repair centre and they replaced my Trackpad. I paid £20 and thought that was the end of my problems. However, 1 week later, I was back in the same position with a broken trackpad and a useless mobile. I then took it back to the shop that 'repaired' my BB and they put a brand new part in in front of me and i presumed it'd work. And lo and behold, it's broken again!!
    I'm now rather annoyed, and was wondering whether anyone could help me and possibly shed some light onto my situation.
    Thanks, Mark

    I HAVE A SOLUTION FOR YOU....
    REMOVE THE BATTERY AND SIM OF YOUR PHONE AND IF YOU WANT IT TECHNICALLY PERMANENT REPAIRED JUST OPEN THE BACK METAL PLATE USING A T5 TORX SCREW ANDSLIDE THE METAL PLATING TO THE RIGHT AND OPEN IT AND YOU WILL SEE YOUR TRACKPAD AND THE WIRE CONNECTED TO IT. PUT A FOAMM TAPE IN THAT AREA YOU SHOULD CUT THE FOAM TAPE IN HALF AND STICK IT THERE THEN PUT THE METAL PLATING AND THE TORX SCREW THERE AFTER YOU CLOSE THE METAL PLATING JUST PUSH THE CLOSED METAL PLATING AND PUT YOUR SIM AND BATTERY AND CLOSE THE BACK COVER ET VOILA!!! NOW YOUR BLACKBERRY IS REPAIRED...
    FOR A QUICK FIX...
    REMOVE OUT THE BATTERY AND SIM OF YOUR PHONE AND JUST PUSH THE METAL PLATE AT THE BACK OF THE TRACKPAD (DO NOT FORCE IT) AND PUT THE SIM AND BATTERY BACK... THIS IS ONLY TEMPORARY...

  • HP Envy trackpad issues

    Hi, I hope this problem can be fixed without having to return my laptop. I bought an HP Envy about a week ago and I've been having issues with the touchpad/trackpad or whatever you'd like to call it. My product number is E1P04AAR. The touchpad just simply doesn't behave. It's not precise, it rarely lets me right click, sometimes only clicking it works and sometimes only tapping it works. It jumps around sometimes for no reason at all. This is really bothering me and I hope someone could please help me out or tell me what to do. Thank you.

    Hi hamdiabdi, welcome to the HP Forums. I understand that your TouchPad is acting erratically.
    Maybe "Adjusting TouchPad or ClickPad pointing sensitivities in Windows 8", "Turning all TouchPad gestures off and on in Windows 8" and "Troubleshooting when TouchPad does not work in Windows 8" will have useful steps to try from this document: Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
    Let me know if any of those steps help
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • NOT disabling keyboard/trackpad on tablet fold...

    This is probably the opposite of user problems regarding the keyboard/trackpad and turning the Yoga Pro 2 in tablet mode... Here's the situation:
    I'm a Java programmer and I'm sharing my files with my home PC, so I can work from my laptop or desktop easily without transferring files back and forth.
    It's no fun adjusting my typing to multiple different keyboards for different PCs, and overall I tend to prefer a trackpad over a mouse for what I do which makes using my lenovo yoga keyboard ideal for everything (majority of wireless keyboards also aren't backlit).
    I'm using the program Mouse without Borders (from the Microsoft website) so that I can use my lenovo yoga keyboard/trackpad on my desktop.
    What I want to do: keep my keyboard and trackpad enabled when putting the yoga into tablet mode. I've already figured out how to disable the touchscreen for such uses, but the only way I know to keep the keyboard and trackpad active is to uninstall the synaptics driver/software. Obviously that isn't an ideal solution to have to install and uninstall it every time I switch between PCs.
    Is there any way to stop synaptics from disabling the keyboard and trackpad when in tablet mode? Preferrably something such as disabling something in device manager, not uninstalling and reinstalling software depending my use for the moment.

    Please provide more information.
    First, I have no idea what "Jimi to Jimi" means. This is probably just something you need to explain to me; a Google search didn't turn up anything useful.
    You said that the keyboard and trackpad aren't working right. What does this mean, exactly? Regardless, the monitor you use should have no effect on the function of your other peripherals.

  • Mid 2013 macbook air keyboard/trackpad stop responding

    I have a mid-2013 13" Macbook Air - 512GB SSD, 8GB RAM - 1.7Ghz i7
    I spend a good deal of time working at my home, where I have two external monitors (one via USB, one via the thunderbolt port) and a bluetooth wireless mouse and keyboard.  Things are great.
    I also go on the road, and when I do, I simply unplug my monitors, close the lid, and go.
    Lately, I've had some very odd behavior happen which acts a lot like what is described in the latest 13" Macbook Pro Retina EFI fix:  http://www.macrumors.com/2013/11/07/apple-releases-fix-for-13-inch-retina-macboo k-pro-keyboardtrackpad-issues/
    Here's what happens....when I'm traveling and away from my bluetooth keyboard/mouse, I will open up my MBA and the trackpad and internal keyboard are unresponsive.  I can press the power button and get it to turn off...power it back on and am able to use the keyboard to control various boot options (diagnostics, single-user, safe-mode, recovery model, etc).  Booting up full, however, the issue will still exist.  Looking at the console log, when this is happening, there are a ton (about 4000 every minute) of the following :
    11/1/13 7:45:26.000 PM kernel[0]: Error: AppleHSSPIController::doSPITransfer CRC from device was invalid
    11/1/13 7:45:26.000 PM kernel[0]: Error: AppleHSSPIController::InterruptOccurred Failed to transfer interrupt data with Err (0xe00002eb)
    Eventually, something happens and things start to work -- I will generally see the following in the console log when it starts working:
    11/1/13 7:45:27.000 PM kernel[0]: Apple Internal Keyboard / Trackpad::start Start Succeeded
    If I let the machine sit at the unlock screen, eventually a dialog comes up and says "unable to find external bluetooth keyboard/mouse..."  It says it will continue to search and will pair with one eventually....it's the same message I would get from my mac mini if it couldn't find the bluetooth keyboard (and has no internal/hardwired keyboard).
    When it is happening, I can use "cmd-r" to boot into recovery mode and recovery mode will complain about not having a mouse/trackpad - yet the keyboard seems to work to control what happens at boot time.
    I called Apple and got sent to the apple store with a "it sounds like a faulty logic board or a connection that needs soldering".  The Apple Store "genius" didn't quite think that was the case and has instead suggested I re-install the operating system.  I'm non-plussed by both suggestions. This has happened both before and after Mavericks... 
    On one of my latest trips, I had a case where I took my laptop out on the plane to try to use it...only to have this issue occur.  I landed, got to the hotel, tried again and everything worked fine.  Went to dinner - leaving my laptop on the desk plugged in - only to come back to have the keyboard unresponsive....  I've now resorted to traveling with my bluetooth keyboard and mouse "just in case".
    Any ideas/thoughts?

    Mv2400
    I will open up my MBA and the trackpad and internal keyboard are unresponsive.
    Do four things to test for fault on this,
    reset SMC ,
    reset NVRAM,
    uncheck "put hard disks to sleep"
    and UNPAIR both your bluetooth mouse and keyboard from this Mac that you are using with it currently.
    yes, the notion that your logic board is at fault is extremely unlikely, additionally (though far more likely) that your Mavericks OS is corrupt.
    RESET SMC
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    RESET NVRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Lastly, go into SYS PREFERENCES > ENERGY > uncheck "Put hard disks to sleep when possible" in both tabs.
    Let your Mac go into sleep or close the lid for a few mins. and reopen and verify that your trackpad and mouse are fine.  They should be after this,.........
    If not contact Apple for full in shop diagnostic, theyll run a hardware test (unlikely causation) and reinstall the OS, then retest and LASTLY replace the logic board (very unlikely).

  • Macbook Air 2012: intermittent, random freezes of trackpad and keyboard lasting a few seconds each

    There have been a few other people to have reported this problem, but there has been no consistent solution for me on my Macbook Air 13" 2012, running 10.8.4.
    What happens is this: while typing, the built-in keyboard and trackpad will suddenly lock up at the same time, randomly, intermittently, and for just a few seconds before returning to normal. This has been true through all the updates of 10.8.x since I bought the system last year.
    During the freeze, one of the three behaviors occurs:
    1) both keyboard and trackpad are completely unresponsive
    2) both keyboard and trackpad get really slow, with high latency. Keys pressed show up much later or have to be pressed several times before registering. Trackpad is jumpy if it moves at all.
    3) key gets stuck, sometimes the BACKSPACE key, which usually results in several dozen emails getting deleted or entire paragraphs, or rows and rows of the same stuck key. Pressing other keys does nothing.
    I've spoken online with various other people who have the same problem and confirmed that the built-in keyboard and trackpad seem to be joined together whenever this problem strikes. You never see one freeze without the other also freezing.
    Also, these commonly-recommended solutions don't work:
    a) Reset PRAM. Done this many times. Does nothing.
    b) Bring it in to Apple. Did this too. They replaced the keyboard and trackpad but the problem remains.
    c) Clearing caches in safe mode. No improvement.
    d) Removing "com.google.keystone.deamon.plist" and "com.google.keystone.agent.plist" doesn't seem to work either, even though the errors and behavior are exactly the same for me as for george.e.gonzalez in this thread: https://discussions.apple.com/message/19702976#19702976
    These files do come back, though, thanks to Google Software Update. The keystone software appears to be part of Google Chrome, although I cannot confirm this.
    e) I DO have Google Android File Transfer installed like one other person reported; they said uninstalling it fixed the problem. Unfortunately, that has not worked for me. Also, Android File Transfer is installed (same version 1.0.50.2266, same Mac OS 10.8.4) on an older 2008 Macbook, and it works fine, which points to something on just this Macbook Air as being the cause.
    f) I don't use the Radio Silence firewall app--can't remove it.
    g) I don't have the telldus device or whatever it is, so I don't have the "com.telldus.service.plist" to remove.
    h) Completely clearing out /Library/LaunchAgents, /Library/LaunchDaemons, and /Library/StartupItems doesn't do anything.
    i) Repairing permissions or repairing the volume does nothing.
    j) Reinstalling the OS fresh does nothing.
    k) I don't have an external trackpad, mouse, or keyboard for testing while the freezing happens, but the machine itself seems to be working, just not the built-in input devices, which are on the same USB bus.
    l) Pressing ESC does not stop the key stuck situation, as it does for some people.
    It feels to me like a hardware problem, not an OS problem, and it feels like a USB bus issue. I have noticed that when I insert USB flash drives, I get the same lock-up for a few seconds, something which my other Macs don't do.
    I've also noticed various USB errors in the Console around the same time (same as george.e.gonzalez):
    7/26/13 1:20:04.000 AM kernel[0]: AppleUSBMultitouchDriver::_deviceGetReport - DeviceRequest for reportID 0x0 returned with result 0xe000404f - retrying
    7/26/13 1:20:05.000 AM kernel[0]: USBF:          844075.636          AppleUSBEHCI[0xffffff80157f1000]::Found a transaction which hasn't moved in 5 seconds on bus 0x1a, timing out! (Addr: 2, EP: 0)
    But I'm not able to precisely correlate these errors to the pause.
    Is anybody else having this problem that can shed more light on it than these other suggested repairs? This has been frustrating for quite a while, but I've had the stuck BACKSPACE key delete hundreds of emails on a webmail platform that I was unable to recover using Undo and out of the trash, and that's just no longer tolerable...
    Thank you, thank you, thank you, if anyone can help me fix this!

    Hi, Dan--
    Nope, none of those four... I do have Dropbox but never installed it on this machine. The other three are services I've never signed up for.
    I am basically using these apps up-front:
    Mail.app, Safari, Notes, Terminal, maybe LibreOffice 4.0.x, maybe Sublime Text 2, Console.
    And the freezes happen about twice a day, usually when I'm in Mail or Terminal, but that's because those are the ones where I'm typing the most and can see immediately when the freezes happen. It could be happening even more frequently while I'm browsing, but I might not know it because I'm merely reading what's on the screen.
    This is a list from Activity Monitor of what I'm using right now, which is very typical of what I use all day:
    407
    XType.FontHelper
    dchang
    0.0
    2
    2.8 MB
    Intel (64 bit)
    278
    xpcd
    dchang
    0.0
    2
    5.0 MB
    Intel (64 bit)
    313
    WebKitPluginAgent
    dchang
    0.0
    2
    944 KB
    Intel (64 bit)
    250
    usernoted
    dchang
    0.0
    2
    4.0 MB
    Intel (64 bit)
    233
    UserEventAgent
    dchang
    0.0
    3
    7.6 MB
    Intel (64 bit)
    347
    Terminal
    dchang
    0.0
    5
    51.3 MB
    Intel (64 bit)
    280
    tccd
    dchang
    0.0
    2
    3.8 MB
    Intel (64 bit)
    243
    talagent
    dchang
    0.0
    2
    6.2 MB
    Intel (64 bit)
    244
    SystemUIServer
    dchang
    0.1
    3
    26.5 MB
    Intel (64 bit)
    4254
    System Preferences
    dchang
    0.5
    3
    24.8 MB
    Intel (64 bit)
    995
    Sublime Text 2
    dchang
    0.0
    12
    82.5 MB
    Intel (64 bit)
    380
    ssh-agent
    dchang
    0.0
    3
    3.0 MB
    Intel (64 bit)
    4321
    ssh
    dchang
    0.0
    1
    2.0 MB
    Intel (64 bit)
    4276
    ssh
    dchang
    0.0
    1
    2.0 MB
    Intel (64 bit)
    335
    ShareKitHelper
    dchang
    0.0
    2
    9.1 MB
    Intel (64 bit)
    429
    ScopedBookmarkAgent
    dchang
    0.0
    2
    5.0 MB
    Intel (64 bit)
    318
    Safari Web Content
    dchang
    2.1
    23
    835.4 MB
    Intel (64 bit)
    316
    Safari
    dchang
    0.2
    17
    127.9 MB
    Intel (64 bit)
    3975
    QuickLookSatellite-general
    dchang
    0.0
    4
    6.0 MB
    Intel (64 bit)
    3974
    Quick Look Helper
    dchang
    0.0
    4
    6.4 MB
    Intel (64 bit)
    3978
    QTKitServer-(3975) QuickLookSatellite-general
    dchang
    0.0
    2
    3.7 MB
    Intel
    319
    QTKitServer-(318) Safari Web Content
    dchang
    0.0
    5
    8.2 MB
    Intel
    3979
    QTKitMoviesValidator-(3978) QTKitServer
    dchang
    0.0
    3
    5.3 MB
    Intel
    359
    printtool
    dchang
    0.0
    2
    5.4 MB
    Intel (64 bit)
    327
    pbs
    dchang
    0.0
    4
    3.7 MB
    Intel (64 bit)
    249
    pboard
    dchang
    0.0
    1
    904 KB
    Intel (64 bit)
    254
    Notification Center
    dchang
    0.0
    3
    18.4 MB
    Intel (64 bit)
    676
    Notes
    dchang
    0.0
    9
    47.1 MB
    Intel (64 bit)
    277
    NetworkBrowserAgent
    dchang
    0.0
    3
    4.4 MB
    Intel (64 bit)
    4156
    mdworker
    dchang
    0.0
    3
    11.7 MB
    Intel (64 bit)
    298
    Mail
    dchang
    0.0
    11
    151.5 MB
    Intel (64 bit)
    302
    lsboxd
    dchang
    0.0
    2
    3.4 MB
    Intel (64 bit)
    54
    loginwindow
    dchang
    0.1
    2
    25.8 MB
    Intel (64 bit)
    3589
    LibreOffice
    dchang
    0.2
    6
    105.9 MB
    Intel
    230
    launchd
    dchang
    0.0
    2
    1.4 MB
    Intel (64 bit)
    469
    iTunes Helper
    dchang
    0.0
    3
    3.8 MB
    Intel (64 bit)
    258
    imagent
    dchang
    0.0
    3
    5.3 MB
    Intel (64 bit)
    3508
    Image Capture Extension
    dchang
    0.0
    3
    9.7 MB
    Intel (64 bit)
    3980
    helpd
    dchang
    0.0
    2
    2.0 MB
    Intel (64 bit)
    270
    fontd
    dchang
    0.0
    2
    6.5 MB
    Intel (64 bit)
    322
    Flash Player (Safari Internet plug-in)
    dchang
    1.7
    21
    255.7 MB
    Intel (64 bit)
    245
    Finder
    dchang
    0.1
    5
    73.1 MB
    Intel (64 bit)
    242
    Dock
    dchang
    0.0
    3
    43.1 MB
    Intel (64 bit)
    234
    distnoted
    dchang
    0.0
    4
    4.1 MB
    Intel (64 bit)
    3550
    Dashboard
    dchang
    0.0
    8
    24.5 MB
    Intel (64 bit)
    663
    cookied
    dchang
    0.0
    2
    3.4 MB
    Intel (64 bit)
    499
    Console
    dchang
    0.0
    2
    26.8 MB
    Intel (64 bit)
    326
    com.apple.NotesMigratorService
    dchang
    0.0
    2
    10.9 MB
    Intel (64 bit)
    4328
    com.apple.iCloudHelper
    dchang
    0.0
    3
    5.5 MB
    Intel (64 bit)
    685
    com.apple.hiservices-xpcservice
    dchang
    0.0
    2
    2.5 MB
    Intel (64 bit)
    315
    com.apple.hiservices-xpcservice
    dchang
    0.0
    2
    2.5 MB
    Intel (64 bit)
    279
    com.apple.dock.extra
    dchang
    0.0
    2
    13.9 MB
    Intel (64 bit)
    320
    com.apple.audio.SandboxHelper
    dchang
    0.0
    2
    2.6 MB
    Intel (64 bit)
    3976
    com.apple.audio.SandboxHelper
    dchang
    0.0
    2
    2.6 MB
    Intel (64 bit)
    3977
    com.apple.audio.ComponentHelper
    dchang
    0.0
    2
    2.7 MB
    Intel (64 bit)
    321
    com.apple.audio.ComponentHelper
    dchang
    0.0
    2
    2.9 MB
    Intel (64 bit)
    236
    cfprefsd
    dchang
    0.0
    4
    11.6 MB
    Intel (64 bit)
    262
    CalendarAgent
    dchang
    0.0
    6
    22.5 MB
    Intel (64 bit)
    4318
    bash
    dchang
    0.0
    1
    1.2 MB
    Intel (64 bit)
    4121
    bash
    dchang
    0.0
    1
    1.2 MB
    Intel (64 bit)
    329
    AppleSpell.service
    dchang
    0.0
    2
    14.8 MB
    Intel (64 bit)
    261
    AppleIDAuthAgent
    dchang
    0.0
    3
    2.0 MB
    Intel (64 bit)
    4330
    Activity Monitor
    dchang
    2.5
    5
    17.9 MB
    Intel (64 bit)
    272
    accountsd
    dchang
    0.0
    2
    3.5 MB
    Intel (64 bit)
    At this time, the only thing generating errors in the console log is the now-famous "coreaudiod[246]: Enabled automatic stack shots because audio IO is inactive" error that is considered normal behavior...

  • How to print the script in condensed mode

    Hi to all,
    Pls help me.
    How to print the script in condensed mode and particular window only print in the condensed mode.

    Hi,
    Hi
    It will remove the blank spaces in front of the variable
    and if you use the extension NO-GAPS
    It will remove all the blank spaces in the variable field.
    DATA: ws_val1 type char12.
    ws_val1 = ' 100 123'.
    Condense ws_val1.
    Write / ws_val1.
    Condense ws_val1 no-gaps.
    write / ws_val1.
    It will give output as
    100 123
    100123
    The CONDENSE statement deletes redundant spaces from a string:
    CONDENSE c NO-GAPS.
    This statement removes any leading blanks in the field c and replaces other sequences of blanks by exactly one blank. The result is a left-justified sequence of words, each separated by one blank. If the addition NO-GAPS is specified, all blanks are removed.
    Please check this link for sample code.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb33e6358411d1829f0000e829fbfe/content.htm
    Regards,
    Raj.

  • Can I use a magic trackpad with more than one Mac at a time?

    I am attempting to pair a MTP with a second MacBook Pro.  So far I can't get system preferences to find the MTP.
    I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
    The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac.  To do this, you first remove the existing pairing and then pair the trackpad again'.
    Can anyone advise, please?
    If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
    Thanks

    Yes, your keyboard, mouse or trackpad can be paired with multiple Macs.  You can even have multiple keyboards, mice or trackpads paired with one Mac.  The caveat is that the device can only be connected to one Mac at a time.  The device can't be paired or connected with a Mac while it's currently connected to another.
    Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other.  The device will connect with the first available paired Mac and then unavailable to the second.   If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on.   I do this with a keyboard from my iMac to a Mac Mini in another room.
    Captfred

  • Keyboard and trackpad freeze and randomly become unresponsive

    I've got a MacBook Pro (15-inch Early 2011) running Mac OS X 10.8.2.
    Since a few weeks ago at random intervals my keyboard and trackpad become permanently unresponsive. I don't recall any particular cause or change that would have caused this to start happening.
    What happens is that the trackpad and keyboard will stop functioning completely. The computer, display etc. would continue to function properly:
    The clock keeps ticking.
    If music were playing it would continue etc.
    Internet connectivity (via an ethernet cable or WiFi) continues to work as well (a download will continue, and even resume if I disconnect and reconnect the ethernet cable).
    Presssing the power button will bring up the shutdown dialog as usual (but I can't use it, obviously, so a forced shutdown needs to be performed instead by holding down the power button longer).
    .. but the keyboard and trackpad are rendered inoperable, as if they were no longer connected.
    I've made no progress in finding out what could possibly be the cause of this. A few observations:
    It has never happened while not using the keyboard (e.g. watch a DVD with TV series for a few hours, and afterwards the keyboard would always be fine).
    It always happens while actively typing (e.g. while in the middle of replying to an e-mail).
    It is not a temporary problem, the keyboard and trackpad will not become responsive again after some time (the computer isn't particulary occupied with calculating something big, no beachball and no busy mechanical noises).
    It does not happen progessively. It works fine and snappy one second, and I'm touching a dead keyboard a split second later.
    I tried connecting a USB keyboard but that doesn't seem to work either (I'm mentioning this since some of the linked threads below close with that as a solution).
    Possibly related (although I haven't found anything in these threads):
    Keyboard causes trackpad to not function properly
    Keyboard and trackpack freeze
    Keyboard and Trackpad Unresponsive
    MacBook Pro Keyboard & TrackPad freeze! Totally Unresponsive!
    MacBook Pro inbuilt Keyboard and Trackpad freeze when not connected to bluetooth devices?
    I've crawled through some log files in /var/log (via the shell and through Console.app) and found a couple things that may be relevant, although they seem unrelated. Etiher way, I was surprised by what I found. All sorts of errors with regards to Bluetooth and USB stuff. I'm not aware of using either. I haven't used bluetooth in years and though I sometimes charge an iPod by USB, I haven't had any problems with that, and this keyboard/trackpad freeze has also happened on sessions where I started the laptop and never even touch the USB ports in the time leading up to the freeze.
    Sample log from when it happened. It last happened at 21:04:xx:
    Jan 14 20:18:39 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x141-192.168.178.13:0!
    Jan 14 20:23:49 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
    Jan 14 20:26:14 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x142-192.168.178.13:0!
    Jan 14 20:29:11 KrinkleMac.local WindowServer[80]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    Jan 14 20:29:16 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
    Jan 14 20:30:13 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
    Jan 14 20:30:43 --- last message repeated 1 time ---
    Jan 14 20:33:24 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x143-192.168.178.13:0!
    Jan 14 20:41:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x144-192.168.178.13:0!
    Jan 14 20:42:43 KrinkleMac.local mtmd[46]: Set snapshot time: 2013-01-14 20:42:45 +0100 (current time: 2013-01-14 20:42:43 +0100)
    Jan 14 20:42:43 KrinkleMac kernel[0]: nspace-handler-set-snapshot-time: 1358192565
    Jan 14 20:43:14 --- last message repeated 10 times ---
    Jan 14 20:43:28 KrinkleMac.local AddressBookSourceSync[6580]: *** -[IADomainCache init]: IA domains cache is out of date.
    Jan 14 20:45:12 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
    Jan 14 20:48:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x145-192.168.178.13:0!
    Jan 14 20:55:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x146-192.168.178.13:0!
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:01:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:13 KrinkleMac.local blued[6615]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    Jan 14 21:01:14 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:01:39 KrinkleMac kernel[0]: USBF:          145183.427          AppleUSBHubPort[0xffffff803c3d2600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:01:39 KrinkleMac kernel[0]: USBF:          145183.722          IOUSBCompositeDriver[0xffffff803ae3be00](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:41 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:01:59 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:02 KrinkleMac kernel[0]: USBF:          145206.333          AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
    Jan 14 21:02:02 KrinkleMac kernel[0]: USBF:          145206.634          AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
    Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:12 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:12 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:02:12 KrinkleMac kernel[0]: USBF:          145216.648          AppleUSBHubPort[0xffffff803a385000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
    Jan 14 21:02:12 KrinkleMac kernel[0]: USBF:          145216.649          AppleUSBHubPort[0xffffff8038a3ba00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:02:13 KrinkleMac kernel[0]: E:[AppleBluetoothHCIControllerUSBTransport]WARNING !!!! [AppleBluetoothHCIControllerUSBTransport::DeviceRequestCompleteHandler] error 0xe00002ed (kIOReturnNotResponding)
    Jan 14 21:02:13 KrinkleMac kernel[0]: USBF:          145217.575          AppleUSBHubPort[0xffffff80398bf400]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.529          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.530          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.530          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
    Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.123          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.123          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.125          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:02:22 KrinkleMac kernel[0]: USBF:          145226.307          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:02:22 KrinkleMac kernel[0]: USBF:          145226.373          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.196          AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.196          USBF:          145228.196          AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
    Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
    Jan 14 21:02:25 KrinkleMac kernel[0]: USBF:          145229.331          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:02:25 KrinkleMac kernel[0]: USBF:          145229.766          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:02:26 KrinkleMac kernel[0]: USBF:          145230.963          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:02:26 KrinkleMac kernel[0]: USBF:          145230.963          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:28 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:38 KrinkleMac kernel[0]: USBF:          145242.843          AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
    Jan 14 21:02:38 KrinkleMac kernel[0]: USBF:          145243.145          AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
    Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:40 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:02:47 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jan 14 21:02:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x147-192.168.178.13:0!
    Jan 14 21:03:03 KrinkleMac kernel[0]: BRCM2070 Hub::terminate(kIOServiceSynchronous) timeout
    Jan 14 21:03:04 KrinkleMac kernel[0]: USBF:          145268.325          AppleUSBHubPort[0xffffff8039bc4c00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:03:20 KrinkleMac kernel[0]: USBF:          145285.139          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:03:21 KrinkleMac kernel[0]: USBF:          145285.572          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:03:22 KrinkleMac kernel[0]: USBF:          145286.868          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:03:23 KrinkleMac kernel[0]: USBF:          145288.132          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:03:24 KrinkleMac kernel[0]: USBF:          145288.882          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:03:25 KrinkleMac kernel[0]: USBF:          145289.385          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.455          AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.456          AppleUSBHubPort[0xffffff8038a96200]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
    Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.492          AppleUSBHubPort[0xffffff803a9a6600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.483          AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
    Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.703          IOUSBCompositeDriver[0xffffff803b7c3700](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.703          IOUSBCompositeDriver[0xffffff803c98b400](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Jan 14 21:04:09 KrinkleMac kernel[0]: USBF:          145333.634          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:09 KrinkleMac kernel[0]: USBF:          145334. 67          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:10 KrinkleMac kernel[0]: USBF:          145334.916          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:10 KrinkleMac kernel[0]: USBF:          145335.347          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:16 KrinkleMac kernel[0]: USBF:          145340.675          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:16 KrinkleMac kernel[0]: USBF:          145341.108          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:18 KrinkleMac kernel[0]: USBF:          145343.300          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:19 KrinkleMac kernel[0]: USBF:          145343.803          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:20 KrinkleMac kernel[0]: USBF:          145344.644          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:23 KrinkleMac kernel[0]: USBF:          145348. 42          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:24 KrinkleMac kernel[0]: USBF:          145348.868          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:24 KrinkleMac kernel[0]: USBF:          145349.299          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily gave up enumerating a USB device after 10 retries.  (Port 1 of Hub at 0xfa100000)
    Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
    Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
    Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    Jan 14 21:04:42 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    Jan 14 21:04:42 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    Jan 14 21:04:44 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    Jan 14 21:05:20 localhost bootlog[0]: BOOT_TIME 1358193920 0
    Jan 14 21:05:26 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    Jan 14 21:05:26 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    Jan 14 21:05:41 localhost com.apple.launchd[1] (com.apple.automountd): Unknown key for boolean: NSSupportsSuddenTermination
    Jan 14 21:05:41 localhost kernel[0]: PMAP: PCID enabled
    Jan 14 21:05:41 localhost kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64

    I've recorded the logs several times now and although a lot is variable (likely unrelated errors and crap). The following 5 lines consistently occur right before the freeze:
    1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    1/18/13 11:06:10.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    1/18/13 11:06:10.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    1/18/13 11:06:24.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    1/18/13 11:07:22.000 PM bootlog[0]: BOOT_TIME 1358546842 0
    1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
    1/18/13 11:29:27.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    1/18/13 11:29:27.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    1/18/13 11:30:02.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
    1/18/13 11:31:39.000 PM bootlog[0]: BOOT_TIME 1358548299 0

  • How do I install bootcamp drivers windows 8 (mainly trackpad)

    I installed windows 8 conumer preview using bootcamp.  I download the drivers to my flash drive, but when i try to install them it says I need a computer running windows 7.  I tried running in compatibility mode the way many people say to for installing on windows 8 but that did not work.  I also tried to install all the drivers i needed indevidually and that worked, but there is one problem.  I can only left click on the trackpad and I connot two finger scroll. 
    If anybody could help me either get the drivers to fully install or simply get right click and scrolling to work it would be awsome!
    If it makes a difference i am running snow lepered on my mac partition om my macbook pro 15 inch 8,2 from mid 2011 (the first quad core one).

    When you are on Lion, yes and if you have any 2011 model, definitely. mid-2011 was about where Lion was about to come out. And the old drivers just do not do a good job on those systems.
    I'd even buy Lion and just put it on an external drive. If you want then use Setup Assistant to make it currrent with your settings, and clone it back to where SL was (might want to clone SL if you need it though and don't need or can't use Lion for some reason).
    Someone else was unable to see Troubleshoot via control-click and I took a screen shot to show that "64.mi" does normally have options for how to run from Properties while theirs lacked that. Which seems to me like an issue with Windows installed on their system and not elsewhere.
    You did a clean install of 8-CP too?

  • Unable to Double Tap with TrackPad or B/T Mouse after 10.8.2 upgrade

    Hello:
    Could some kind person possibly help a Mac newb?
    For some strange reason, I am unable to Double Tap using *either* my TrackPad or Bluetooth Mouse immediately after upgrading my Mid 2011 iMac from OS X 10.6.8 to 10.8.2.  Single tapping on any file highlights the file name and double tapping the file name (not the icon) allows renaming the file (which I believe is all normal).  All other gestures appear to function normally - just can't double-tap TrackPad or double-click the Mouse.
    ALREADY TRIED:
    Shutting down and removing all power cords and cables to the computer.
    Removing the batteries from TrackPad & Mouse.
    Creating a new user account.
    Reinstalling OS X 10.8.2 including updates 3 times.
    Booting into Safe Mode then running Disk Utility to Repair Disk Permissions and Repair Disk.
    Running Capture_Data.dmg and sending the files to Apple Support.
    Apple Senior Advisor said that their Software Engineer did not notice anything out of the ordinary, but is now digging deeper.
    Deleted com.apple.Bluetooth.plist & com.apple.PowerManagement.plist per Apple.
    Cleared browser cache & history, then emptied trash.
    I am currently working with a Senior Advisor at Apple since 02.01.2013 (10 days) to follow-up on the same issue as a previous case opened on 01.14.2013 after upgrading the OS X on 01.12.2013.  Apple originally suggested that I take my iMac to the Apple Store for diagnostic testing, which I have avoided because everything was working fine before the upgrade and then I noticed the same issue with the my mouse.  I decided to hold off wiping the system clean, doing a clean install then migrating my data and settings from the backup until my Apple Advisor tells me if their Software Engineer discovers anything else after they dig a little deeper into the diagnostic report.  But that could take weeks and right clicking to open files is getting old real fast.  Besides, my Adobe CS6 apps rely heavily (if not entirely) on double & triple clicks, so I am paralyzed from using any of their products.
    Since Apple said they have no reported cases like this, I have done a lot of digging on my own before writing this.  Sorry about the long post, but I was hoping to provide as much detail as possible to be respectful of everyones valuable time.  Any help or suggestions would be greatly appreciated.
    Regards,
    Doug Klimek

    Problem Solved in less than 5 minutes - Thank you Travis @ AppleCare!
    SOLUTION:
    Set the Mouse & Trackpad Double-Click speed to any value other than "Fast". The slider bar has 10 settings (1=Slow to 10=Fast) so I set mine to 9 and it works fine.  But your system may respond differently, so you might want to start with #5 (Middle) and go from there.  FWIW, the #10 setting (Fast) does work, however I had to use one finger on each hand because I couldn't tap fast enough with only one hand.
    HERE'S WHAT TO DO:
    Click the Apple Logo > System Preferences > System > Accessibility > Mouse & Trackpad > Double-click speed > Drag slider to the #5 setting (Middle of bar) then tweak to your liking
    FYI ONLY:
    FWIW, I had no Double-Click problems when setting the Mouse & Trackpad Tracking to #10 (Fast) as long as the Double-Click speed (above) was set to any value other than #10 (Fast).  I am only mentioning this to share what I learned.
    Click the Apple Logo > System Preferences > Hardware > Mouse > Point & Click > Tracking > Drag slider bar to your liking
    Click the Apple Logo > System Preferences > Hardware > Trackpad > Point & Click > Tracking Speed > Drag slider bar to your liking
    Hope this information is helpful to anyone before consider wiping their disk clean and doing a fresh M/L reinstall like i almost did.

  • Alum BT keyboard does not work after wake up - but BT trackpad does!

    Here is my set up:
    MBAir 2011 model (13", i7 4GB, Lion.. all up to date)
    Desktop set up (same at work and home)
    - Thunderbolt display
    - Aluminum Bluetooth Keyboard
    - Aluminum Bluetooth Trackpad
    What I do:
    - Plug in the sleeping mbair into my display via thunderbolt and power cable
    - Wake up using external bluetooth trackpad
    - computer wakes up and external trackpad is functional (it always works)
    - 7/10 times the external keyboard will not connect to enter password to get into system
         - I have tried power button banging on it for a long time and does not work
         - open mbair and type password in and remove keyboard and repair and after several tried it will work
         - then I can close mbair and use external keyboard
         - painful to do this most days at home and work
    What have I tried
    - PRAM, SMC reset
    - remove all BT entries - trash blutooth properties files and freshly add them back
    - I have tried waking using keyboard as well and it does not work
    Only think I have wanted to try and have not found out is, if keyboard can reset to factory.
    Yes I also have the occasionaly wifi not connecting from sleep issue

    Hello
    Have you noticed this problem on factory settings or only on your Windows 7 installation? Maybe its just a driver or software issue
    Make also sure that latest BIOS version is installed. Look on the Toshiba website for an update:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Before you start the update, make sure that all programs are closed and you are logged in as Administrator.

  • White Macbook (Mid 2006) Trackpad problem

    I have a white Macbook from Mid 2006 and it has been functioning fine all these years. However just yesterday, it developed a trackpad problem.
    I am still able to move the cursor but nothing happens when I click the trackpad button.
    I then bought an external mouse. However the problem did not go away entirely. The external mouse would work just fine (I would be able to click with it) if I did not touch the trackpad. However on the few occasions where I accidentally touched the trackpad, the external mouse would suddenly suffer the same fate as the trackpad, i.e. I was still able to move the cursor but I could not click with the external mouse.
    I managed to alleviate the problem by checking the "Ignore trackpad when mouse is present" option in my System Preferences, thereby preventing any accidental touches of the trackpad from affecting the external mouse. However I hope to get to the root of this sudden and mysterious problem, rather than sweeping it under a "Ignore trackpad when mouse is present" option.
    I have tried resetting the PRAM and it did not solve the problem.

    Might want to check: Apple->System Preferences->Universal Access , click on the Mouse & Trackpad Tab, then Make sure "Mouse Keys" are off , make sure "press the option key five times .. etc" is unchecked, make "ignore trackpad when mouse keys is on" is unchecked. Check That 1st, because it does sound like a preference problem .. If I think of another one I'll ring in ... Good Luck

  • HELP! In middle of upgrade to windows 8 and keyboard/trackpad stopped working!

    Hey all, new mac user here. Just bought a new macbook air 13" 2014 model. I succedded in installing windows 7 via bootcamp via a usb drive and was in the middle of installing a downloadable windows 8 upgrade (at a preferences page when they ask you to select your favorite color) when my macbook's keyboard/trackpad stopped functioning. I plugged in a usb mouse and that would not work either. I have absolutely no clue as to what to do next. If I had to install some driver or thing please tell me how to cancel the windows 8 install and return to windows 7. Thanks for all your help strangers

    I was not able to find any drivers specifically for the web cam. I did find software to use the camera, but that was all I could find.
    However, I do have a question about the Windows 8 upgrade process that was used.
    Did you do an in-place upgrade or a clean install of Windows 8?
    Go back to device manager. Is there anything here at all in an other category indicating it is having some type of an issue?
    There are certain events that will need to happen.
    Go to the start screen and search for uninstall a program. Select this option in the settings category.
    This should take you to the Desktop app and show the familiar uninstall a program feature from Windows 7.
    Select add/remove Windows Components on the left.
    Is Framework 3.5 checked here? If not, enable this and install it.
    Then, install the HP framework which is needed for some HP programs. This is a Windows 7 installation, but it should go through.
    http://goo.gl/jDI7X
    Once that is finished, reboot the system.
    Let me know what happens.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for