CONDENSE FORMAT CHARACTER MODE REPORT IN REPORT2.5
I want to generate report in condense character format
in Report v2.5. I want to print 230 character per line and need
to condense it. I know I need to send ASCII character(15) to
printer. I have tried printer code (before & After) option but
it doesn't seem to write character(15) in text file.
null
hi faisal,
have u written the control characters in printers text file.
U need to write it in ur printers file defined in report's
system parameters.
You can specify in the file as located in
oracle_home\report25\printers\printername.prn
Before page CONTROL(R)
After Page Control(O)
control(N) is for BOLD Printing
Control(O) is for Normal Printing
Control(R) is for Condensed Printing.
Bye
Faisal Shaikh (guest) wrote:
: I want to generate report in condense character format
: in Report v2.5. I want to print 230 character per line and need
: to condense it. I know I need to send ASCII character(15) to
: printer. I have tried printer code (before & After) option but
: it doesn't seem to write character(15) in text file.
null
Similar Messages
-
Printing Character Mode Report On Oracle 9i AS - Application Server
Hi All,
Even though I have put this problem in Reports Forum,
I thought it fit to put forward this problem in Forms Forum
since Forms Forum is being accessed by a large number
of developers across the world.
Now the problem :
I have developed a report in Character mode that runs in
hundreds of pages. The output will be taken on High speed
Dot Matrix Printer since the client requirement is fast printing
& economical printing. That is the reason to develop this report
in Character mode & not Bitmap mode. This report works
fine in Client-Server environment.
However, the problem lies in the Web Server environment.
The same reports will be run on Oracle 9i AS. Since the
browser supports only HTML & PDF format, Character
mode reports faces a major problem.
Can anybody help me to resolve this problem ??
I would like to remind you again that the constraint is NOT
TO USE LASER PRINTERS.
Thanks.
Mayur
[email protected]Hi Shahmayur,
I too am facing the same problem. If your problem is cleared then please let me know, so that i can continue the work.
Rgds
Bhaskar -
Character mode Report in Landscape Format
Hi All,
I want to print my character mode report in landscape format. But I am not getting it. Everytime I get print as Portrait. I am printing from live previewer of report builder.
I am using Oracle 9i and Report builder 6i (6.0.8.11.3).
I have done following settings:
System Parameter ORIENTATION=Landscape
DESFORMAT=DECLAND.PRT (Given by Oracle)
In the object navigator I have set following properties for Main Section
Width=11
Height=8.5
Orientation=Landscape
Char Mode Width=132
Char Mode height=66
I have done same settings for Header Section and Trailer Section. Please help me.
Thanks in advance.
Regards
MonaYou will need to edit prt files to add the printer escape sequences to change the page orientation to landscape. Printer escape sequences can be obtained from the printer manual, or the printer vendor.
For instance, HP printer escape codes can be obtained from the HP website under the printer support links.
The steps below describe how to print a landscape, character mode report from a Windows NT PC on an HP 4100N Printer. The 4100N is a dual mode printer that can use either PCL or Postscript printer language.
1. Use a web browser to navigate to the HP website and obtain the printer escape codes for the HP 4100N. If you are unable to locate the HP4100N printer, look for generic PCL information. The HP site also includes detailed information on the printer command syntax.
2. The HP4100N printer command for landscape page orientation is "ESC&l1O" - where ESC indicates escape, '&' (ampersand) is the parameterized character, 'l'(lower case letter l) is the group character, '1' (number one) is the printer value character and 'O' (upper case letter O) is the termination character.
NOTE: The HP documentation uses "EC" to signify the escape character.
It also suggests pressing CTRL and the letter P together, then
releasing both keys and pressing the ESC key. If this is done in
a dos editor, a left arrow will actually be displayed on screen.
This character cannot be interpreted by Oracle Reports and will
cause printing errors if used in a .prt file. Instead, just use
the letters "ESC" to indicate that the code that follows is a printer
escape sequence.
3. Make a copy of the wide.prt file and rename it to "mywide.prt."
4. Add the page orientation escapes to mywide.prt file:
printer "mywide"
height 66
width 132
before report esc "&l1O" *** Puts Page in Landscape Orientation***
after page control(L)
after report esc "&l0O" *** Resets page orientation to Portrait ***
return control(M)
linefeed control(J)
SYNTAX NOTES: The escape sequence must be enclosed in double quotes ("). The above comments regarding page orientation are used to clarify where the escape codes gets added, but they should NOT be used when editing
the actual .prt file.
5. Save mywide.prt file to the $ORACLE_HOME\report60\printers\ directory.
6. Go to Windows PC -> Start -> Settings -> Printers and open the properties for the HP printer. Ensure that the option to "Always Spool Raw Data" is checked. This option is usually under the General Printer
Options, or Spool Options. On Windows NT, you must have Administrator privileges to change this setting.
7. Test running the report to the printer and specify desformat mywide. It is not necessary to include the file extension (.prt).
8. The report will now print in landscape orientation. -
Character mode report font size
i am using oracle 10g DS, and i have created character mode report as discribed in report builder help.
i have set font to
courier new (central europien), regular, 8
as descibed in help "10. Choose Format > Font, and select the font, style, and size that most closely
approximates the character-mode font. For example, Courier, Regular, 12
points.
but my output font on printed page is pritty big.
how can i set size of font printed, it seems to me that this setting has no affect?
also i dont get all the caracet displaud corectly, is this set in uifont.ali conf file
thanks and regards
radecan anybody help me with this?
i have read that font size for character mode reports can be set in prt files.
i am using dflt.prt
i want to change font size to eg. 8 and to print font condensed, but i was enable to find any online manual how to do this, please advise me or supply url with relevant manual for editing prt files.
thanks and regards
rade -
How to send a character mode report from Oracle Form 10g to a printer.
how sending a character mode report from Oracle 10g report to a printer.
I'm sending to a printer located in the network
i have theses parameter report
desformat = prtname
desname=??????
destype= ?????
mode=character
i would like to preview the report before to send to a printer
sldsACCOUNTING SYSTEM
2006-2007 From Date : 01-JUL-06
Printed On : Friday August 31 2007 11:13 AM To Date : 30-SEP-07
G A/C. Code 99-99-9999 Description: xxxxxxxxxxxxx H
-- DOC. # -- -- DATE -Chq/Slip# ---------- N A R R A T I O N -- -- DEBIT -- -- CREDIT -- -- BALANCE --
Opening Balance: -999,999,999.00 Cr.
G *** Total *** 0.00 0.00 -999,999,999.00H
================= ================= =================
when i run character mode report in browser then display this output properly
but sir problem is that when i print the report
G(use for bold)
is not working
means not print in bold format in printer
same character print G
do you have any idea when i print through browser to printer G for bold purpose its work to printer ? -
Linebreak Code in Character Mode Report
Dear All
I m saving a Character Mode Report which is 132 column Wide, and i can access that report in Note Pad in proper format and alignment but when i m use WORDPAD, it open in un aligned format i mean with line break.
so any one can give me any Idea so i can open that report in WORDPAD too.Take a look at the .prt file that you are using. The linebreak code is stored in there and you can alter it to the appropriate code for your printer/platform/application to view correctly.
-
Problem to print character mode report in Landscape
I set orientation and select but it still print in landscape character mode. When it print in character mode report in portrait format its ok.
I Set and use all the option in report to print in Landscape in character mode.
I ask you please to give me information about the printing definition files and its codes, how to use printer codes. I use two printers
1. Epson LQ2180 2. HP 6L
I used HPLWIDE printing definition files put its still print in portrait format not to print in landscape.
Thanks for corporation
I will wait ur reply...
At this address
[email protected]
[email protected]Hi,
This sounds like a similar problem that I had (and still having). It was (is) a Bug. Go to metalink.oracle.com and reference this bug#1413754. See if this is your problem as well. My only work around was change the format of the file instead of using character mode I am now using PDF. Which is working fine for me.
~Vannette -
Warning Msg: Character Mode report is being opened as a Bit-mapped report
Hi All,
I am opening a Oracle Standard Report in Oracle Apps "INVISMMX", while opening it shows the below warning message:
"Character Mode report is being opened as a Bit-mapped report"
What is the reason for this?
How can I open this report in ASCII mode itself?
Thanks,
GowriI believe Oracle Reports by default will open a report as a bit-mapped report. You can change the poperties of the report to make it a character mode report by:
1. If this is a new report, in the Object Navigator, click the Reports node,
then click in the toolbar.
2. Double-click the properties icon next to the report node to display
the Property Palette.
3. Under the report node, set the width and height properties as desired:
for example, 11 (or 15) width x 8.5 height for landscape or 8.5 width x 11
(or 15) height for portrait.
4. Under the Character Mode node:
a. Set Design In Character Units to Yes.
b. Set the report width and report height to the appropriate
character-mode dimensions for the report, such as, 132 (or 180)
width x 66 height for landscape or 102 width x 85 (or 116) height
for portrait.
5. In the Object Navigator, expand the Data Model node, then the System
Parameters node.
6. Double-click the MODE properties icon to display the Property Palette.
7. Under the Parameter node, set the initial value for property to Character.
8. In the Object Navigator, double-click on the Layout Model node icon.
9. In the Layout Model view, choose FormatLayout OptionsRulers to display
the Ruler Settings dialog box.
10. Set Units to Character Cells and Number of Snap Points Per Grid Spacing
to 1. Click OK.
11. Click View in the menu bar and make sure that Snap to Grid is checked.
12. Choose Tools Preferences to display the Preferences dialog box.
13. On the Preferences page, set Horizontal Interfield to 1 and Vertical
Interfield to 0. Click OK.
14. Choose Format Font, and select the font, style, and size that most
closely approximates the character-mode font (such as, Courier,
Regular, 12 point). -
132 Column Text / Character Mode Report
I m facing a problem to Saving a Character Mode Report in 132 column or more then 80 column of width ,,,,
I can not get that report in proper format though
i have change the setting in margin alsoYes I have set the the following parameter
1) Data Model --> System Parameter ---> Mode=Character
2) Data Model --> System Parameter ---> Desformat=dflt
3) Data Model --> System Parameter ---> Desname=myfile.txt
4) Main Section ---> Charater Mode ---> Width=132
though i get this report in normal format within 80 columns, but more than 80 column the alignment of the report out display out of columns positions.
please give me alternat how can i save my 132 column
report in a propert format. -
How to open a Character mode report in report designer 2.5
I am trying to open a character mode reoprt in Report Designer 2.5 and .. getting an error message:
Waring: Character-mode report 'XYZ' is being opened as bit-mapped report.
Warning: Page width of report '<report name>' changed to fit the font for a character cell. Might be a consequence of font-mapping.
Is thier any way to open Character-mode report in Report Designer 2.5
Report is designed for AR module.
Thanks,ACCOUNTING SYSTEM
2006-2007 From Date : 01-JUL-06
Printed On : Friday August 31 2007 11:13 AM To Date : 30-SEP-07
G A/C. Code 99-99-9999 Description: xxxxxxxxxxxxx H
-- DOC. # -- -- DATE -Chq/Slip# ---------- N A R R A T I O N -- -- DEBIT -- -- CREDIT -- -- BALANCE --
Opening Balance: -999,999,999.00 Cr.
G *** Total *** 0.00 0.00 -999,999,999.00H
================= ================= =================
when i run character mode report in browser then display this output properly
but sir problem is that when i print the report
G(use for bold)
is not working
means not print in bold format in printer
same character print G
do you have any idea when i print through browser to printer G for bold purpose its work to printer ? -
Character mode report no new line after header.
I am using Reports 6i. I have a character mode report with a header and body. I am outputing it as a .cvs file. The problem is that there is no live feed after the header. This means when I load the .csv file into excel the first row has the headers and the first data record, after that is it OK. Eatch row in the spreadsheet has a single data record/row.
any ideas?
bencan anybody help me with this?
i have read that font size for character mode reports can be set in prt files.
i am using dflt.prt
i want to change font size to eg. 8 and to print font condensed, but i was enable to find any online manual how to do this, please advise me or supply url with relevant manual for editing prt files.
thanks and regards
rade -
Controlling Font Size in Character Mode Reports
Hi,
The default Font size of Character mode Reports is 12. I want to reduce the font size from 12 to 8 .How to go about it.The printer codes mentioned in reports Documentation only talk about other attributes like Bold etc.Also the documentation gave the impression that The fontsize can only be controlled for Bitmap reports.Kindly help me out.
Thanks in advance.
Regards
DeepakDeepak:
The font size for character reports is based in the printer size characters, there are: 10, 12 15 20 etc.
I believe that you want is a smaller character, try to configure your printer with condensed font in the panel of the printer, if you can't do that, try send printer codes to the printer via printer definition file.
For the printer code that you need, check the user's manual of the printer to know what code is that you need.
Look for commands in your manual
Good luck.
Ennio -
WinXP:Ok .vs. Win2000:Error character mode report (6i)
Hello,
We have a character mode report designed and running in a Windows XP machine.
To make it work was necessary to create a custom PRT file that contains the condensed and non condensed printer codes used by the report.
After some tries it is running ok.
But it will be used in a Windows 2000 Server machine. After installing reports (6i) and patches we made a copy of the custom prt file file used in the XP installation and tested.
Unfortunately it doesn't work and the printed page is unformated. Due to the characters printed in non condensed mode, the line doesn't fit the paper width wrapping to the next line. It seems that the printer control characters doesn't work...
Trying to understand why, we used the "print to file" option in xp machine. The control characters are generated ok: "".
Doing the same thing when running in a Win2000 machine it generates strange control characters.
In addition, if we open the file generated by the Win2000 machine in the WinXP machine, all printer control characters seems to be ok.
Does anyone know why does it occur and/or how to fix that?
Thanks,
Vinicius PachecoThis is a database forum. I suggest you try posting this question in one of the more relevant forums, such as Reports or Oracle Application Server - General.
Good luck, APC -
How to modify & use Printer Defination files for Character Mode Report
How can use & modify printer defination files for changing formats & orientation in character mode report. I donot know how to use printer defination files I tried to set the system parameter (Desformat) but it doesn't work.
I m also faced same problem that u face,
If u want to make character mode report so plz follow these instructions:
1. Set the properties of Report Name Node in Character Cell is Yes.
2. Change the mode of the System Parameter Mode is Character.
3. Goto the Layout---> Main Section Properties and set the Character Report Width and Height like 132 and 66
4. Create Formula Column and write this code "RETURN(CHR(14));"
5. Goto Layout Model and map this formula column into Header of the Body Like If ur Company Name is "ABC COMPANY" attached with field and map Formula Column.
5. Goto Printer Definition File DFLT.prt open in NotePad and set width and hieght that u set in Main Section of Report.
6. At Last u Run the Report with Some System Parameter or User Parameter and View as Character Mode Report.
In My Case I used EPSON LQ2180 Printer
So, U Ask More Qustion and u have more knowledge About character mode report Plz Mail me at this address.
Shahid Shafi
[email protected] -
Character mode report and 9iAS
Hi, our company is migrating system developed by Developer 2000 to Developer 9i on 9iAS. Our old system has lots of character mode reports.
Is there any ways to preview these character mode reports on Web on 9iAS? Is it neccessary to convert all character mode to bitmap format?
Thank you very much in advance.
cheers,
KathyNo, you can still run them as the are over the web (they won't look great, but they should still run without conversion).
Regards,
Danny
Maybe you are looking for
-
Problem in dynamic selection in vendor balance report tcode S_ALR_87012082
Hello Friends, After upgrading from 4.7 to ecc 6.0 we are facing the below mentioned problem. In a Vendor Balances report, the document selection is not available in the dynamic selections and hence i am not able to select the business area to suit t
-
Using bapi in lsmw posting g/l account
hi experts, i am trying to post a document in lsmw using bapi method. i am using business object: BUS6030 (Accounting GL posting). method : POST. when trying to mapping the line items i coudnt find the line item NEWBS(po
-
Grey out 'Overall Limit' field in ME23N/ME23
In ME23N (ME23), the 'Overall Limit' value of (Limit) Purchase Orders within the Limit tab can be amended even though the Purchase Order has been created and released. Once the Purchase Order has been released the 'Overall Limit' value needs to be l
-
Embedded SQL against Oracle Question
Software: Forte 3.0.J. Server Platform: HPUX 10.2 Database: Oracle Problem Description: During the course of development, I ran into a problem using multiple columns in an sql UPDATE/SET statement. I was trying to update a.COLUMN_1 and a.COLUMN_2, wh
-
Which update method to use???
Hi all, Our client has an average of 1000 sales orders per day. Which update method will be the best for such a scenario and why? Please suggest. Cheers Jayashree