CONDENSE

hi there,
after populating fields in custom segments in IDoc is it necessary to use CONDENSE on all these fields. if not what is the problem ?
thanks in advance

Hi Pawan,
It's always better to condense the field values before populating them in the IDOC. Otherwise, there is a possibility of extra space added to the fields.
Please reward points if it helps.
Regards,
Amit Mishra

Similar Messages

How to print the script in condensed mode

Hi to all,
Pls help me.
How to print the script in condensed mode and particular window only print in the condensed mode.

Hi,
Hi
It will remove the blank spaces in front of the variable
and if you use the extension NO-GAPS
It will remove all the blank spaces in the variable field.
DATA: ws_val1 type char12.
ws_val1 = ' 100 123'.
Condense ws_val1.
Write / ws_val1.
Condense ws_val1 no-gaps.
write / ws_val1.
It will give output as
100 123
100123
The CONDENSE statement deletes redundant spaces from a string:
CONDENSE c NO-GAPS.
This statement removes any leading blanks in the field c and replaces other sequences of blanks by exactly one blank. The result is a left-justified sequence of words, each separated by one blank. If the addition NO-GAPS is specified, all blanks are removed.
Please check this link for sample code.
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb33e6358411d1829f0000e829fbfe/content.htm
Regards,
Raj.

Which adapter or cable for connection from apogee condenser mic to ipad 4 retina display 16 gb wi-fi?

hello
i ve got an apogee condenser mic to record my acoustic guitar and singing. in box there was a cable for connection to ipad&iphone. but that cable was not able to plug in to my ipad 4 (retina display 16 gb wi-fi).i need an adapter or an another cable to plug in the microphone into ipad.but which pin?which kind of adapter?thank u

Hi,
You need a Lightning adapter with 30 pin...

Report in Condensed Mode

I want to print report somewhere in condensed and somewhere in bigger font. I also would like to control the page setup and printer (form feed, eject etc) programatically. I haev seen the prt file but unable to use it. Can someone send me a sample report file for my reference. Please mail me to [email protected]
Thank you,
Dwijesh, India

Hi all,
This is to inform that I have myself found the solution. It is possible to print matrix report in condensed mode. The method for printing is same as for any other report. The mistake I made was not checking whether the .prt file is getting referred correctly. The DESFORMAT system parameter was getting populated through the calling form. By referring to the correct .prt file the problem got fixed.
Regards,
Jayram

I would like to condense my iPhoto library

Dear forum,
I am starting to be really disappointed about the unstable software upgrades in iPhoto. Iphoto is continuously crashing in my Mac and this is really annoying. Tested so far all the various proposals I could find in various forums but nothing seems to work in a consistent way. My iMac is 7 years old and I have been told there is only a way. Buy a new iMac and everything will work.
I would like to give last chance to Apple so I am going to buy the new iMac. But I have a 35Gb iPhoto library that is used only for creating projects and books. Unfortunately it is not in one disk, being splitted in three HDs (the internal one and two external ones). I know this is wrong but unfortunately I can't go back.
I do not use Apple products to manage my photo archives (about 700 Gb). I use iPhoto only for making books. I have about 35 books and various other projects I do not want to loose moving to the new iMac. But with the current version of iPhoto there is no chance to condense the library in one HD keeping my books (unbelievable that this possibility is not existing!). I have also iPhoto Library Manager, duplicated the library in one single library but as you all know it does not keep the books and projects.
So if I want to keep my books in my new Mac I should keep my external drives!
I can't believe this is the situation and would appreciate indeed if someone could help. I have tried with all the possible Genius support and it looks this is not possible.
It simply means that to solve software problems I need to buy the new iMac. If I buy it I will loose my books and projects unless I keep the old external HD.
I would really appreciate some suggestion.
Thanks
Luca

But I have a 35Gb iPhoto library that is used only for creating projects and books. Unfortunately it is not in one disk, being splitted in three HDs (the internal one and two external ones). I know this is wrong but unfortunately I can't go back.
This is not possible - an iPhoto library can not be split in any way - it is a single entity and can not be split up - do you have several iPhoto libraries each independent of the other?
I have about 35 books and various other projects I do not want to loose moving to the new iMac. But with the current version of iPhoto there is no chance to condense the library in one HD keeping my books (unbelievable that this possibility is not existing!).
Guessing that you have several iPhoto libraries there is no real reason to consolidate them - just move each of them (each will need a different name) to an archive folder in your pictures folder - switch between them by depressing the option key and launching iPhoto or using IPLM
Also with a new Mac and Aperture you can consolidate libraries - not sure if Aperture consolidates books but suspect it will - however given the way you use iPhoto I see no reason to consolidate
LN

Condense music on ipod that is no longer in my computer's library

Hi. So, I have had a 60gig ipod for God-knows-how-long now....pre2006 I think. Anyway, I hadn't realized that music was meant to flow only one way (computer to ipod and not vice versa), so I deleted much of my music library from my computer after transferring to my ipod. I have TONS of cds on there and have completely filled the ipod. I was hoping to just convert the larger files to MP3s, but this option in iTunes is greyed out when I have my ipod connected. (Obviously, I am not automatically syncing with my current library). Two questions:
1. MOST IMPORTANT: Is there a way to condense music files directly ON the ipod, when songs aren't in my computer's music library anymore?
2. What is the best option for backing up 60gig or more of music FROM my ipod & other locations & condensing it to the same place/library?
Thanks for your help!
erika

An iPod (especially an old one) is a very dangerous place to keep your only copy of song files. You should not do (1) at all, even if it is possible. (I can't think of a way to do it directly.)
There is no way to transfer music from iPod to computer using iTunes (except for songs you purchased from the iTunes Store). However, there are third-party methods and utilities for transferring from iPod to computer. If you do a Google search on something like "ipod transfer mac," you should get some links.
Once the song files are back on your Mac (and maybe even backed up to a second location), add them to your iTunes library. Now, you can use the Create AAC Version command in iTunes (menu bar under Advanced) to convert them to a "condensed" format. Note: The old files will still be there as well after converting.
In iTunes preferences General tab Import Settings, you can change the conversion options. I recommend using AAC Encoder at iTunes Plus. That creates 256 kbps AAC files (which is what the iTunes Store uses). If you want "MP3" files, you can select the MP3 Encoder there.
Then, you can sync your iPod to the converted song files. And you will have achieved what you wanted with (1), plus your valuable songs files are now backed up on your computer.

Do i need phantom power for a condenser mic to use with garageband?

i have learned condenser mics need phantom power. if i would hook up a MXL 900 series condenser to my MacBook via an XLR to 1/8" cable, would it work? does garageband have some sort of amplification plug-in? or would i need some sort of mixer or otehr phantom power device for it to work?
MacBook 2.0gHz (White) Mac OS X (10.4.8)

condenser mics need phantom power to work at all, it has nothing to do with amplification.
you need an interface or mixer that supplies phantom power, or an external phantom power supply to use your condenser mic.

Need to condense the value of VBELN in to new variable.

Here in this code..I had defined a Local variable LV_VBELN LIKE VBRK_VBELN and VBELN is Type c (10).
The function module that I had used in the Import Parameter
you can see the BRANCH...Its type is C (4).
I am passing the value of VBELN to the Import parameter in the function module. As it result it is throwing the short dump.
I need to declare a new Local variable of type c with length 4 and condense the VBELN value into this local variable and pass it to the Functino module.
Can anyone suggest me with the code.
Here is the code.
DATA: ADDRESS LIKE SADR,
          BRANCH_RECORD LIKE J_1BBRANCH,
CGC_NUMBER LIKE J_1BWFIELD-CGC_NUMBER,
      ADDRESS_VALUE LIKE ADDR1_VAL.
DATA : LV_VBELN LIKE VBRK-VBELN. "Local Variable for vbrk-vbeln
--->Select single bupla into lv_vbeln from vbrk where vbeln EQ is_bil_invoice-hd_gen-bil_number.
CALL FUNCTION 'J_1B_BRANCH_READ'
     EXPORTING
          BRANCH     = lv_vbeln
          COMPANY           = is_bil_invoice-hd_org-comp_code
     IMPORTING
          ADDRESS           = ADDRESS
          BRANCH_RECORD     = BRANCH_RECORD
          CGC_NUMBER        = CGC_NUMBER
          ADDRESS_VALUE     = ADDRESS_VALUE
     EXCEPTIONS
          BRANCH_NOT_FOUND = 1
          ADDRESS_NOT_FOUND = 2
          COMPANY_NOT_FOUND = 3
          OTHERS            = 4.
IF sy-subrc = 0.
st_txt-cnm1 = ADDRESS-NAME1.      " Name 1
st_txt-cnm2 = 'BRAZIL'.
st_txt-cnm3 = ADDRESS-STRAS. " House address & street
st_txt-cnm4 = ADDRESS-ORT01.   " City
st_txt-cnm5 = ADDRESS-PSTLZ.   " Postal code
st_txt-cnm6 = 'Tel:'.
st_txt-cnm7 = ADDRESS-TELF1    " Telephone no.
st_txt-cnm8 = ADDRESS-TELFX.   " Fax number
*Commmented and added to avoid hard code CNPJ
st_txt-cnm9 = 'CNPJ ' + CGC_NUMBER.     " CGC number (company,branch,check digits)
CONCATENATE 'CNPJ' CGC_NUMBER INTO st_txt-cnm9 SEPARATED BY SPACE.
**End of changes
ENDIF.

Hi Kittu,
The length of BRANCH is 4 but the length of VBELN is 10.
DATA: LV_VBELN like VBRK-VBELN. "Local Variable for vbrk-vbeln
The short dump is due to TYPE MISMATCH. So try to declare in the following way...
Declare like this....
DATA: LV_VBELN like J_1BBRANCH-BRANCH.
Best regards,
raam

I have WD 1TB and use Time Machine for the past 2 years. Now I have multiple folders in my external hard drive and want to know how to condense all folders into yearly folders instead. Anyone know how to do this?

Now I have multiple folders in my external hard drive and want to know how to condense all folders into yearly folders instead. Anyone know how to do this?

anthonycancel wrote:
I want the folders I already backed up to come together into one folder when that year is over. Is there a way to manually do that or automatic through TM?
I'm quite sure there is no "automatic" way to do this. I've never heard of anyone trying it either. I suppose if you wanted try it, you could simply create a new folder in the same partition TM is on, label it for that year, then gather all the days for that year and drag/drop them into the folder. I suspect (but do not know) you'd be risking the continuity of your backups, meaning TM would simply start over again, meaning that next back up would start a new series of backups, with the first one roughly equalling the entire capacity of your internal HD, instead of adding only the new data to the previous backup. Once again, I would recommend against it, unless you're fine with TM starting a new series of backups if it doesn't work out the way you want it to. Hope you'll post back with results so we can learn from it.

How do I condense my itunes files? As each new OS came out, I put it on a new drive...now I have 4 SSD drives, with 2 copies of iTunes..how do I condense them all down to one all-encompassing library?

As each new OS came out, I put it on a new drive...now I have 4 SSD drives, with 4 copies of iTunes..how do I condense them all down to one all-encompassing library? Early 2008 Mac Pro Tower.

dsf,
Not sure exactly how you moved your library but this link may help
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/

Abap dump: internal table too small, condense non-character like fields

Hi there,
I created a dynamic internal table by:
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
ASSIGN IT_EP_TABLE->* TO <IT_DBTABLE>.
SELECT * FROM (P_TABLE_NAME)
<b> INTO TABLE <IT_DBTABLE> </b>
It gave the error <b> internal table too small </b> SAPSQL_SELECT_TAB_TOO_SMALL,
so I removed the error by using "into corresponding fields of <IT_DBTABLE>.
But now it is not creating a TXT file by function module from internal table records. As it says the CONDENSE statement cannot be executed and dump occurs: 'OBJECTS_NOT_CHARLIKE' 'The current statement only supports character-type data objects', 'In statement
"CONDENSE" the argument "<F_SOURCE>" can only take a character-type data object'.
It only happens for table AFPO. As I think this table has fields i.e. currency which cannot be treated as characters. Is the move corresponding approach ok. Or how can I create text file with these records.

try creating a dynamic table in the image of the source table and then move-corresponding to the original one. Something like this:
DATA dref TYPE REF TO data.
DATA tabdref TYPE REF TO data.
FIELD-SYMBOLS <dyn_struc> TYPE ANY.
FIELD-SYMBOLS <struc> TYPE ANY.
FIELD-SYMBOLS <tab> TYPE table.
*create table of your choice
CREATE DATA tabdref TYPE TABLE OF (P_TABLE_NAME).
ASSIGN tabdref->* TO <tab>.
create a line variable for the above table
CREATE DATA dref like line of <tab>.
ASSIGN dref->* TO <struc>.
create a line variable for the dynamically created table
CREATE DATA dref like line of <IT_DBTABLE>.
ASSIGN dref->* TO <dyn_struc>.
SELECT * FROM (P_TABLE_NAME)
INTO TABLE <tab>.
loop at <tab> assigning <struc>.
move-corresponding <tab> to <dyn_struc>.
append <dyn_struc> to <IT_DBTABLE>.
endloop.

Adobe Media Encoder CS4 (Mac) condenses .mov vertically

Hi, folks
QuickTime movie generated by Final Cut Pro 7, converted to same size .flv (720 x 480) results in video that is condensed vertically. No such problem when using Flash 8 Video Encoder. Would prefer to use more recent encoder since a document of much smaller fize size is created.
Tried "cheating" width of output video setting by making it larger to eliminate black bars on either side of image area that had resulted in previous attempts, to no avail.
Thanks.
Jo

Hi, folks
QuickTime movie generated by Final Cut Pro 7, converted to same size .flv (720 x 480) results in video that is condensed vertically. No such problem when using Flash 8 Video Encoder. Would prefer to use more recent encoder since a document of much smaller fize size is created.
Tried "cheating" width of output video setting by making it larger to eliminate black bars on either side of image area that had resulted in previous attempts, to no avail.
Thanks.
Jo

24" iMac glass permanently damaged by condensation

I have a 24" iMac purchased in August of 2007. In 2008, I left the computer off for a few days while I was on vacation. When I turned the computer on there was a large amount of condensation on the inside of the screen. Just as I started to panic, it burned off and only left some small marks. Because the marks were small and I live in Macau (where there is no Apple service) I decided to just live with it.
Over the past two years the markings have started to grow and now cover about 60% of the screen. It's hard to describe the marks. They're long diagonal grayish lines. Because they appear to have some kind of shadowing going on, I think they're on the glass and not the actual LCD screen.
I have uploaded an image which can be seen here: http://img337.imageshack.us/img337/8754/dsc02127.jpg
I would like to know what kind of DIY options I may have. I've read some other threads saying the glass can be taken off with suction cups but I'm not sure what to do after that. Should I leave the glass off? Can I clean the glass and re-install it? Is there a way to order and install new glass? Or should I avoid removing the glass and try something else altogether?

There is a video on the MacOSG YouTube channel that will show you how to remove and replace the iMac screen. Look for the "How to install a hard drive in an aluminum iMac" video.
Dave M.
MacOSG v.2.0 coming April 1, 2010! No fooling! Check it out!
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG
Note: I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Condensed mode printing in graphic mode printers

Dear sir.
I am using Reports-6i as developer tool.
while developing reports i use to run in character mode,
Before generating the report i will pass prt file, and also before printing code
should be condensed.
The report get printer in dot matrix printer as condensed mode ,
What i need is the same should print in HP desk jet or any graphic mode printers
by taking care of software.
please guide in this regard.
mathapati.

Please try the following:
1) in printer settings, in advanced tab "print directly to the printer" must be selected.
Hope this helps.
Bob

Matrix report in condensed mode in dot matrix printer

How can we print a 10g matrix report in condensed mode in dot matrix printer? The dot matrix printer is a Epson LQ 1070+ printer. I am tried using a printer definition file and given printer codes in the report. The printing is not taking place in condensed mode. This method however is working for other reports. Could any one help?
Regards,
Jayram
Edited by: jayramkumars on Feb 6, 2009 12:11 AM

Hi all,
This is to inform that I have myself found the solution. It is possible to print matrix report in condensed mode. The method for printing is same as for any other report. The mistake I made was not checking whether the .prt file is getting referred correctly. The DESFORMAT system parameter was getting populated through the calling form. By referring to the correct .prt file the problem got fixed.
Regards,
Jayram

Safari rendering default text with condensed font?

Has anyone else experienced this in the last few days?
All of a sudden Safari is rendering default text with a different font, a light, condensed one.
The side-by-side shows the Wordpress Admin menu on my Macbook & on my iMac.
The Macbook is still rendering as always, the iMac now has this new font.
Aside from within the Wordpress Admin area, I'm seeing the same thing in various other places you'd expect to see a default font, for default text.
It's not the end of the world but considering I haven't done anything to cause the change I'm concerned it's something malicious causing it,
any insights anyone?
Thanks in advance.

Installled any third party fonts lately?
And check for duplicate fonts.
Open the Font Book in your Applications folder.
From the Font Book menu bar click Edit > Look for Enabled Duplicates

CONDENSE

Similar Messages

Maybe you are looking for