Condition at Header Level

Dear all,
Following is my requirement.
My condition (ZPPV)is at both header& item level (In M/06, header & item level condition check boxes are ticked).
My client requirement is if at header level, I enter condition amount say $ 50 & that perticular purchase order is having 7 line items, $50 should get equally divided to each line item i.e.( 50/7= $7.14).
Please tell me which setting should I do for it?
Best Regards,
Shailendra
Edited by: Shailendra Sabale on Jun 15, 2010 4:03 PM

Hi,
In M/06 you select the group condition indicator for your condition type.
Cheers,
Satish Purandare

Similar Messages

BAPI_SALESORDER_SIMULATE How to get the conditions on header level?

Hi,
is it possible to get the pricing conditions on header level (sales order) with the Bapi BAPI_SALESORDER_SIMULATE?
We only found the information on item level?
Thanks a lot.

hope its possible,
If don't specify any item no for condition type in bapi, then it will be consider as header condition.
make sure condition should be header condition.
hope it will work.
Regards,
Marreddy

Deactivation of Pricing Conditions at header level of Sales Order

Hello there,
We have used a routine in pricing procedure (BaseType Routine) to deactivate condition MWST in the MWST condition line in pricing procedure, transaction V/08.
In the routine, We played with the KINAK (set to K )and KOBLI (set to space) flags of structure KOMT1 and XKOMV and delete the MWST entry in the TOBLI table and succeeded to deactivate the MWST at item level of the sales order. (MWST condition appear in the conditions tab at item level as inactive)
We have created a sales order with only one item that has the MWST condition deactivated at item level.
But in the conditions at header level the MWST condition does not appear. Shouldn't the MWST condition appear at header level but deactivated (with a yellow triangle next to MWST)?
If yes is there a flag that we forgot to set?

Hi,
what is the table name you had mentioned
TOBLI is it correct?
Thanks
mano

How to mantain entire freight charges in header condition or header level.

Dear - all
when am creating a purchase order i have 2line items with different materials. but i want to give freight charges as header level for which value will be distributed to each and every line item, so for that what will i do - which is my item condition and which is header condition.
But i want to enter the entire freight charges in header level or in header condition.
Pls suggest the procedure for mantaing the header condition for that i enter the total freight value in header level.
thanks
sunil

hi
u can do it by checking the tick of header condition in the respective condition
copy the condition FRA1-Freight % or FRB1-Freight (Value) in M/06
then
in changes which can be made coulumn u will get tick of header ,just tick it and add this condition to ur schema in M/08
hope it help

Changes in conditions at header level in Scheduling Agreement

Dear experts,
I would like to change condition for duty at header level.when i did through ME32l,system is showing these conditions in Grey field.I want to over write the condition value with new one.
Please suggest me how to do this.
Thanks in advance
MK

Hi MK,
While condition customizing in "chnages can be made" manual entries if you select manual entry has priority "c" then only you can overwrite the condition value
but for selection "B" you will not be able to overwrite because this value is flowing auto from conition record
If you think logically if you are maintaining condition record and condition value is flowing auto why system should allow you to change instead you can change the condition record from where the value is flowing
And if you want that value to be always overwritten make "c" as priority
Hope this clears your doubt
BR
Diwakar
reward if useful

Pricing procedure for contract conditions at header level and Item Level

Dear Friends
In Contract Sales Document Type [VOV8]in Contract section Pricing Procedure for Header and Item
What is the function of it
where we can mention list of Pricing Procedure here bec in standard only 3 pricing procedures is available
Kindly Regards
Arun

To have Milestone Billing Plan at header level also, you can maintain Billing Plan 01 in Sales order type (T.Code: VOV8) & for Item level Billing Plan has to be maintained at Item Category Level (T.Code: VOV7).
Regards,
Rajesh Banka
Reward points if helpful.

Conditions on RFQ Header are not changeable at PO Header level

Dear Gurus,
I have maintained a Quotation and enter the conditions on Header level in Quotation. Once i adopt the Quotation in Purchase Order, these conditions are displayed both at Item and Header level and i cannot edit the condition value at PO Header level, they are editable at Item level but not at header level.
I want to edit them at PO Header level too.
Please advise.
Johi Kapoor

Hi,
If that is item condition then you can not change it at header level
check in M/06 make it at header level in change which can be made tab
Regards
Kailas Ugale

Condition Currency at Header Level

Hi,
Using SRM 7.0, SP09, ECS.
We are unable to change the Conditions Curency for Header Level Conditions while creating RFx Response. Is it standard behaviour?
Note: It is working fine with item level conditions.
Ganapathi

Hi,
Someone who is using conditions in RFx/RFx Response kindl check and reply.
In RFx, before publishing add more than 1 currency in Bidder's tab page. In Response, go to condition tab page...
add a condition at item level for which calulation type is not %. You will get a box to select reqired currency....
add a condition at header level for which calculation type is not %. You don't get any option to selectu currency. The field is grayed out.....Is it so in your system?
Ganapathi

Pricing Conditions deactivation at header level of Sales Order

Hello there,
We have used a routine in pricing procedure (BaseType Routine) to deactivate condition MWST in the MWST condition line in pricing procedure, transaction V/08.
In the routine, We played with the KINAK (set to K )and KOBLI (set to space) flags of structure KOMT1 and XKOMV and delete the MWST entry in the TOBLI table and succeeded to deactivate the MWST at item level of the sales order. (MWST condition appear in the conditions tab at item level as inactive)
We have created a sales order with only one item that has the MWST condition deactivated at item level.
But in the conditions at header level the MWST condition does not appear. Shouldn't the MWST condition appear at header level but deactivated (with a yellow triangle next to MWST)?
If yes is there a flag that we forgot to set?

Hi experts,
Has anyone done the above mentioned before, please reply...

Freight at header level in PO is not appearing Invoice

Hi Experts,
I have entered "Freight" condition at header level which is distributed to items as per their value. When i did the goods receipt, freight charges were showing in FI document created. But now when i am doing invoice for the same purchase order, freight charge is not appeared in Invoice or in FI documents. Please advise.
Regards,
Kamal

Hi Kamal,
While doing MIRO,Please check the layout in right side of screen.There is three options:
1.Good/Service items
2.Planned delivery costs
3.Good/Service items+Planned delivery costs
Please select option 3 and then try.
Regards,
Manish

PR00 cannot be changed on header level

Hi All,
I activated the "header condition" flag of the condition type "PR00". And the manual entries flag of PR00 is marked as "C" (Manual entry has priority) But when I created a sales order, the PR00 still cannot be changed. Anyboday knows about the reason? PR00 is now changeable on item level.
Thanks
Jerome

Hi,
I think you agree that that the PR00 condition at header level is a collection of all the line items.We are maintaining the condition record for the articles in the condition record.Which are at line item level.PR00 at header level includes the toatsl of all line items PR00.
In case if you want to give total net order value HM00 condition type
Thanks
M.Sridhar

Clearing Sales Tax at Header Level in an Order

Hi,
I have a requirement to not charge any tax on an order if the credit card used on the order is a government credit card. Currently I have implemented this logic in USEREXIT_SAVE_DOCUMENT_PREPARE. I am able to clear out the sales tax at the line level but this change does not reflect at the header level. I have to manually click on update pricing to zero out the tax displayed at the header level. I could not find a variable to tap into header level pricing condition and tax value field.
I would greatly appreciate if any one can give me some pointers on where to look for header level data for tax. Also, is there any better user exit to implement this functionality.
Folliwing is the code I am using to clear out line item level tax:
          LOOP AT XKOMV INTO WA_XKOMV WHERE KSCHL EQ 'UTXJ'.    "GET THE TAX CONDITION
              CLEAR WA_XKOMV-KWERT.                               "Set the TAX to 0
              CLEAR WA_XKOMV-KAWRT.
              CLEAR WA_XKOMV-KBETR.
              MODIFY TABLE XKOMV FROM WA_XKOMV
                TRANSPORTING KWERT KAWRT KBETR.
          ENDLOOP.
          LOOP AT XVBAP INTO WA_XVBAP.    "GET THE TAX VALUE
              CLEAR WA_XVBAP-MWSBP.                               "Set the TAX to 0
              MODIFY TABLE XVBAP FROM WA_XVBAP
                TRANSPORTING MWSBP.
          ENDLOOP.
Thanks,
Paresh

Hi,
In the case of sales cycle, All the item level taxes are summirised and come to the header level. So we can't find the conditions at header level for taxes. Check the user exit , because, the values are already moved to the header level structure and then you are clearing the item level taxes. I hope thats why the changes are not reflected in header level.
Regards,

Header level to be copied to item level

hi,
   i would like to make pricing condition at header level then the base amount should be equaly devided amound the line items.
pls advice me with the settings.
regards
sreekanth

hai srikant this is srinivasNaidu
first, the Basic Price should not be Header condition
        ex: in one sales order two line items are there
             (a) car
             (b) bike
   in this case how u want to charge the same price for both
   ok if u want according to your business requirement
pl follow the configuration settings of HeaderConditions ex
   HA00, HB00,(but don't foreget that these are discounts) ok

Price Condition at the Header Level

Dear SAPfans,
Can we set the pricing procedure at the header level of sales order,
i would like to configure the rounding mechanism work on the header condition on the sales order, can it be done thru pricing procedure ?

Hi,
You can make condition type either header or item level.
header level coniditon type doesnt have access sequence and you generally enter the value manually.
You can use this condition type in Pricing procedure.
Check all about Condition type in V/06
Hope this will help.
Reward Point if helpful.
Thanks,
Raja

How can I have the pricing conditions at the item and header level of the d

How can I have the pricing conditions at the item and header level of the delivery? There exist "condition" tabs both the header and the item level of the delivery but the contents of the tabs are empty. I'll be happy if you can help me. Thanks in advance....

Hi
If you want to have the pricing procedure at delivery level then you need to assign a pricing procedure at delivery level also
Just go through the path to maintain the pricing procedure at delivery level.
IMG -> Logistics execution -> Shipping -> Basic Shipping Functions -> Pricing -> Pricing Procedure. for Delivery.
But can you be more clear if the above one is not your query ?
Regards
Srinath

Condition at Header Level

Similar Messages

Maybe you are looking for