Condition Control (KMOV-KSTEU) always shows "C" Manual

When performing the final settlement of customer rebates in
VBO2 > Rebate Payments > Final Settlement > Using Payment Screen
The condition type for Customer Commission (BO08) is always showing condition control as "C" changed manually even when the Commission Settlement document is created automatically. What happens then is that when the Rebate Credit Memo is created the reversal of the accural does not take place. The condition values in that are 0.00.
The condition control is supposed to be 'E' Condition Value and basis fixed. this Condition Type is never changed manually, it based on a percentage in the condition records of the rebate agreement.
How can I change the condition control so that it is always 'E'?
Thanks.

Refer Note # 943329

Similar Messages

How to change condition control from C to E

Hi all guys, need you hope on below question:
I 've created a new condition type, which is a fix amount/accrual, and going to be used in billing plan sales order. but, when I issue the first invoice (30% of sales order), this accrual condition type is supposed to post 30% as well. but it posted full amount. I have checked all condition type, pricing procedure and copy control config. nothing is wrong. only one thing is condition control XKOMV-KSTEU = C when I check my invoice. but I think it's supposed to be E.
Would any guy tell me how to make XKOMV-KSTEU=E, or any other solution can be provided.
(by the way, I have read below link, but still dont know where to do that change? it belongs to config or coding change?
http://wiki.sdn.sap.com/wiki/display/SD/Pricing+Conditions)
Thanks in advance.
Vic

Hi,
As per the standard,
Billing plan will divide entire billing amount as per the refernce billing plan (Billing dates/milestones and %values). All the condition values in the pricing procedure, including taxes, will be divided proportionately as per billing plan only.
Regards,
Sharan

Im trying to transfer my songs to my itunes. ive tried wit all kinds of softwares and also manually. when i go to my computer and on ipod and select view show hidden files it dont show the ipod control folder. it only shows the dcim

my ipod been actin up lately. sometimes im just playing a song and all of a sudden it freezes or turns off. it dont do it often but it do. so im trying to transfer all my songs to my itunes or my computer. i have tried every software out there and it tells me that im missing a plugin. i have restored my ipod and had to start brand new. i have updated my itunes to make sure is not a update issue. i have the latest updates but is stil not doing it. so when i try to transfer the songs manually i go to my computer; my ipod; view folder options and select show hidden files. it dont even show the ipod control folder. it only shows dcim

You need a third-party program to get non-iTunes purchased music off the iPod. Which have you tried? Th good ones cost like TouchCopy and PhoneView. Here are some others:
Copy music from Ipod to new computer...: Apple Support Communities

How to always show page controls-Acrobat Reader DC

Whenever I go into full screen then exit full screen, the page controls are hidden and I have to go to "View-Show/Hide-Page Controls-Show Page Controls" every single time. How can I make Acrobat Reader DC always show page controls? I keep the page controls undocked.

Hi Awesome1pc2,
As of now, their is no customizable setting to always show the page controls option once you exit the full-screen mode, you would have to keep working with 'Undock' option.
Regards,
Rahul

Is there anybody know the meaning of Condition control in pricing?

Hi everybody,
When I create a sales order in CRM,and the system will call IPC for pricing calculation,
Object "pricingcondition" is one of the parameters,in which there is a field named "m_control",it's condition control.
As far as I know,it has some potential values,such as "A","B",and "C".Is there anybody knows the meanning of them?
Thanks.
Edited by: Jerry cui on May 20, 2010 8:20 AM

hi,
This field Indicates whether the prices or values in a condition are fixed or whether they have been changed and, if so, in what way. For example the indicator shows, for example, if the prices generated by a condition have been changed manually during processing.
A     Adjust for quantity variance
B     Free
C     Changed manually
D     Fixed
E     Condition value and basis fixed
F     Condition value fixed (billed items)
G     Condition basis fixed
H     Condition value fixed (cost price)
This field is same as the R/3 field KONV-KSTEU.
Thanks and Regards
shanto aloor

Condition control and origin ??

hi,
can any one tell me what does condition origin and condition control ?
what is their significance of them in pricing ?
any examples please
regards
sriram.

Hello,
Here is some useful information on condition control - KSTEU
KSTEU is a very important attribute of a condition. The condition control has two purposes:
a) to record manual changes
b) to control how a condition is handled.
KSTEU is very helpful if you want to reconstruct the history of a condition in a document. The KSTEU of a condition can be changed in various places. The most common case is, that the KSTEU is changed during the copying of the conditions from one document into another. PRICING_COPY is the function where this takes place and it also depends on the pricing type (MODE in PRICING_COPY), the origin of the condition KHERK and the actual value of KSTEU. Please refer to the coding of PRICING_COPY itself for the precise rules. Besides copying conditions there are several other occasions where KSTEU might be changed.
The most common KSTEU value is 'A':
A : Adjust for quantity variance. A condition with a KSTEU = 'A' is recalculated in a normal way. The rate has been automatically determined (e.g. via a condition record). The condition is not fixed at all. Especially when the item quantity is changed, the rate might be adjusted if scales are present. All formulas associated (base value, value etc) are executed the normal way. If a condition is automatically found, A is the normal KSTEU value.
I could go on and explain the other possible values of KSTEU. If you want information on any one specifically, please let me know.
I hope you find this information very helpful and hopefully it will solve your problem.
Regards,
Martina McElwain
SD - Forum Moderator

Notification and Control Center does not show

Hi,
Sometimes (I don't know exactly under which circumstances) on my iPhone 4 (iOS 7.0.2), Notification and Control Center won't appear with swipe gestrue.
In this situation, When iPhone is locked and a notification (like message or phone call) arrives, the screen ALWAYS shows that notification and the screen is always on, until I arraive and lock it manually !! The second one is a serious problem beacuse after some hours the battery drops dramatically.
ONLY a reboot solves this probelm.
Is there any solution to this topic rather than reboot?

Same problem! I have a 4 though so maybe that's the problem? What iphone do you have?

Cisco Jabber for Windows always shows "Away"

Cisco Jabber for Windows (9.0.1, CUPS 8.6.4, UCM 8.6.2, Exchange 2010) always shows status as "Away" for one user. Others seem to be working correctly showing "one the phone", "in a meeting", etc. Tried reinstalling client with no change. If you manually change to "Available", it changes right back to "Away". Anyone have an idea where to look (registry, logs, etc.)?

I am seeing the same problem. I haven't tried a different user to login on the same machine, but I did try closing my client on my primary machine (exited) and then logged in on a different computer with a fresh Jabber for Windows install.
I am running Jabber for Windows Version 9.0.2 Build 9453 on windows 7 64bit primarily, and Windows XP as the second test. Running CUPS 8.6.4 in HA over WAN cluster mode with CUCM 7.1.5 and Unity Connection 8.5.1 ES 16.
Phone presence information does still flow through when I pick up my phone hand set my status changes from Away to On a Call.
When I check the presence diagnostic test for my user, it also reports that I am away.

Volume OSD always showing "0"

Hi,
I've got a problem with the green volume bar that appears when you use the volume keys. The OSD always shows the volume level as zero ("0" text on the right, empty bar). Controlling the volume works just fine though, it's just the volume level OSD that's broken. Mute icon in OSD also works.
I already reinstalled the hotkey drivers several times, including older versions. Also tried deleting the registry entries (HKCU\Software\IBM, HKCU\Software\Lenovo, HKLM\Software\IBM, HKLM\Software\Lenovo), no luck there.
Same thing also happens when logging in with a clean user profile.
Any ideas?
Message Edited by kalsm on 04-12-2009 06:07 AM

and when i put it on charge the number of battery always decrease and stop on 0% !!!! Please help me

In CLIENT_RESULT_CACHE_STATS$ "Find count always shows 0"

In CLIENT_RESULT_CACHE_STATS$ "Find count always shows 0" even client cache is enabled.
I am not able to enable client side result cache . I use ODAC which uses ODP.net driver internaly i have attached code file.
I have done following settings in database
client_result_cache_size 1048576 FALSE
client_result_cache_lag 3000 TRUE
result_cache_mode MANUAL
result_cache_max_size 5373952
result_cache_max_result 5
result_cache_remote_expiration 0
client_result_cache_size 1048576
client_result_cache_lag 3000
Database version is Enterprise Edition Release 11.2.0.1.0
Only select * from V$RESULT_CACHE_STATISTICS where find count increases always but " Find count" in CLIENT_RESULT_CACHE_STATS$ is always 0.
If the client side result cache enabled means it find count in CLIENT_RESULT_CACHE_STATS$ should increase rite???
Please help me to solve this issue
sharath

Oops, not query the sys views.
Thanks Chris, just read your message while post above.
Yeah, should not use dba_objects.
Message was edited by:
user498460
Message was edited by:
user498460

I want Preview to always show the thumbnails view!!!!!

Latest build of preview, Mountain lion OS X
When I open a PDF in Preview, it shows the Table of Contents view. I want Preview to always show the thumbnails view! Is there a way to change this to the default setting? (And dont say goto view - thumbnails, that's not a default option)Every time I pick a photo or PDF it starts with the Table of Contents view every time!

This works but only when opening the same document. Other documents just default to the plain view.
Big oversight - particularly when merging lots pdfs and each one has to be manually changed to thumbnail view. All becomes very cumbersome

My fire fox download helper not detected current video on you tube. It's always shows only the first video which i was downloaded.pls help

My fire fox download helper not detected current video on you tube. It's always shows only the first video which i was downloaded.pls help

You need to refresh the page (F5) to update the items in the download menu. Apparently YouTube refreshes the page in such a way that the extension doesn't gets notified, so you need to refresh the page manually if you want to download a media file from this page.

I'm not able to update my ipad from 4.3.5 to ios5. its always showing an error 3195 whi isit so.. Plz Help me

i'm not able to update my ipad from 4.3.5 to ios5. its always showing an error 3195 whi isit so.. Plz Help me

I don't think bulk update for password is supported in R1(same in R2). Find below statement in oracle doc
Support Bulk Update: Determines if the field can be modified as part of a bulk modification of multiple users. Fields that are expected to be unique to users, such as username, name fields, and password, do not support bulk update. For fields with System Controled=Yes or Unique=Yes, this property can never be set to Yes. For information about setting the properties of an attribute, see "Configuring User Attributes" in the Oracle Fusion Middleware Administrator's Guide for Oracle Identity Manager.

My time machine always stops at some point... It always shows this message: "Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup volume.

My time machine always stops at some point... It always shows this message: "Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup volume. I have tried everything and even did time machine in safe boot as told by an apple suppoprt advisor. still the same error after 16gb

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to a failed backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

SMC update always show up when starting the computer...

hi after the SMC update, every time when I restart my computer that SMC window always show up telling me that I'm at the 1.1 version. Is this normal? how do I turn it off? cause it is slowing down my computer when it's starting up.
thanks!

Although deleting it will probably solve the problem, I didn't have to when I ran the SMC update. It's still there and it doesn't pop up at every startup.
I just took a look at the script in the SMC firmware update installer that gets run after the install completes, and it looks like it just adds the updater application as a login item. Have you tried manually removing it from your login items?
Click on the Apple menu at the top left of the screen and choose System Preferences. Click on Accounts in the lower-left area of that window. Click on the Login Items "tab" at the top of the window and see if the firmware update is in the list. If it is, you can remove it by clicking on it and clicking the little minus sign button.
MacBook Pro 17" 2.16 GHz Mac OS X (10.4.7)

Condition Control (KMOV-KSTEU) always shows "C" Manual

Similar Messages

Maybe you are looking for