Condition exch.rate KOMV-KKURS needs to be updated at the time of billing.

Hi All,
We are in a situation system needs to determine the exchange rate at the time of the billing date.
We need to set it up for delivery-based billing process.
I want to mention some important details:
1- Sales order document currency is local curr. but prices are maintained in EUR in VK11.
Because of that
         Exchange Rate for Price Determination = 1 , (KOMP-KURSK)
         Price cond ex.rate for conversion to local currency = 2,1      (KOMV-KKURS)
2- The VTFL configuration is
        Pricing Type = G     Copy pricing elements unchanged and redetermine taxes
        PricingExchRate type = C     Exchange rate determination according to billing date
3- Billing date = PGI date always.
Now at the time of the billing (Consider 2 days later after order creation) my expectation is Price cond ex.rate =2,2 because of system has new ex.rate like 2,2.
Actually Price cond ex.rate is updated when I set pricing date same as billing date manually and update prices with "B Carry out new pricing" but in that case price is changed as well because the price can be diffrent from at time of the billing rather then at the time of the order creation. I need to update only Price cond ex.rate.
Any suggestions ? (Maybe I can create a new pricing type only updates ex.rates can anybody guide me how I can handle that ?)
Edited by: Goksu Firat on Mar 23, 2010 3:49 PM

Hi,
I had a similar problem, but in your case If you need put the exchange rate as new rate of the billing, you should set PricingExchRate type = E in copy control.
If you need that the exchange rate will be the same of delivery, set the option Price source like D . If you don't use a pricing in delivery try set it too and make tests.
Att,
Henrique

Similar Messages

How to make repricing for specific conditions at the time of billing?

Hello
I'm SD Pricing person. Let me ask here experts below my concern.
In EU countries, there is recycling fee in sales of electronics or Note PC with batteries....to keep our earth clean.
So when customers buy such products, they have to pay more as recycling fee including invoice amount.
My question is... we want to make repricing for recycling conditions when the billing is created.
Based on our configuration, recycling condition is not defined as a kind of tax condition.
So this value is just copied from sales order.
(pricing type in copy control is 'G' which means repricing for tax condition.)
In this situation, we want to make repricing for those conditions during operating system.
Is there any easy way to cover this?
As I think, this is not easy because the system is already operated.
To change condition attribution is really risky. If we dare do, we have to migrate all open orders.
So I want to put this way to the end of my choice.
For this requirement,
1. We have to change condition class or category or calculation type in order to be repriced based on pricing type 'G'.
(ex. Set the condition category as 'I' inter-billing or 'L' always repricing.)
But transaction data are created now and all open orders will be affected.
2. To create new conditions are not easy because these conditions are mapped to the CO-PA value field and the values are posted in FI doc.
3. To change pricing type in copy control is almost impossible because of the impact.
What can I do this in this situation?
What I want to do is just to make repricing for specific conditions at the time of billing in case that pricing type of copy control is 'G'.
Thank you in advance.

Let me ask agagin to all experts.
I want to make A condition to be repriced at the time of billing.
For this, I have to set condition category as 'L' (Generally new when copying).
But I do not want to do in that way becauuse I am maintaining big operated system now.
In addition, though I migrate open orders after changing config. as 'L', it is almost impossible for use to migrate because we have more than a thound open orders per a DAY as Globalized system.
That is why I am asking.
Simply I can create new condition but as I mentioned, there are various recycling fee so we already created about 10 conditions. And this recycling conditions are linked to REA package of SAP. So creating another 10 more conditions can not be a way for us.
At last, what I want is not to be shown this condition only in billing doc.
'A' condition should be displayed in both Sales order and Billing doc.
And simultaneously, when the billing is created and if user changed 'A' condition master, then new value which is different from sales order have to be reflected in billing doc.
Thank you in advance.

[svn:fx-trunk] 7868: Fixed bug in flex4test testWheel app; it needed to be updated to the latest effects API after motionPaths changed from an Array to a Vector . MotionPath

Revision: 7868
Author:   [email protected]
Date:     2009-06-15 16:37:33 -0700 (Mon, 15 Jun 2009)
Log Message:
Fixed bug in flex4test testWheel app; it needed to be updated to the latest effects API after motionPaths changed from an Array to a Vector.
Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/flex4test/src/testWheel.mxml

Walter Laan wrote:
almightywiz wrote:
Walter Laan wrote:
The security popup really messes with the focus in Firefox (3.6.16) though.Not saying you're wrong, but I'm using FireFox 3.6.16, as well, and I have none of the focus troubles you've described.Cannot reproduce it now either. Weird.I got the impression you were referring to keyboard focus, so I did some further tests on focus behavior. The test results are listed in the Accumulated Results table on the 1st post.
The only browser so far that works as I'd expect, or at least as I'd like, is IE.
Applets and keyboard navigation have always been a PITA. Some time ago I vaguely recall seeing an update involving a new parameter to regulate initial focus (applet or page, ..or another applet), but for the life of me I cannot locate it now. Given that it was a parameter for initial focus, I doubt it would help in this case.
Edited by: Andrew Thompson on Mar 26, 2011 6:18 PM
Removed table which has now been expanded & added to 1st post.

Does my keynote 5.2 (09 installed from CD) need to be updated through the App Store?

Does my keynote 5.2 (09 installed from CD) need to be updated through the App Store?

Does that Tivo have the on demand icon?

TS1702 Fitness HD for the iPad is no longer supported and it keeps saying that it needs to be updated in the badge on my app icon store. Apparently, it was bought by another company and now that company wants to charge me 2.99 to update my app. I

About a year ago, I purchased FItness Hd for the iPad. Yesterday, it showed up in the app badge as needing to be updated. I clicked it and now it keeps telling me that this app is no longer available for purchase. When I look into the app store, the same app is now for sale 2.99 under a different company. I have tried to delete and reinstall the app thinking it will clear out the badge on the app icon stating that I have one update. This is frustrating. Somehow, this company was sold and my old app/software is causing a conflict with the App store. Help???

Thanks for your reply. Unfortunately, my query is not so much about the sale of the company and the dream. I agree with you on that point. Good for them. My frustration is that this old app has now caused a glitch in my Apple App Store icon. I have a red badge with one update and it is referring to the old app that has been sold that needs to be updated. When I try to update the app it says no longer available for purchase. So I have since deleted that app in hopes that it would resolve the red badge issue. It has not. Somehow, that old app and the new app with the same name but by a different company has caused the glitch. I have reset all settings on my iPad, I have rebooted, I have deleted the app and still the red badge with the one update for the old app is there. Hmmm. . . I guess I need to take this into the Genius bar or wait for ios 7 in hopes that it will fix the glitch. Thanks again for your help.

An app I downloaded is no longer showing up on my screen. The app store shows thar it needs to be updated, but the update bottom is colored light, not dark.

I downloaded Pandora a while back. My 12 year old nieces were playing with my iPad and now the Pandora icon is not on my screen. The app store shows that it needs to be updated, but I can't do it. What can it do to recover my Pandora program?

Thanks for your reply. Unfortunately, my query is not so much about the sale of the company and the dream. I agree with you on that point. Good for them. My frustration is that this old app has now caused a glitch in my Apple App Store icon. I have a red badge with one update and it is referring to the old app that has been sold that needs to be updated. When I try to update the app it says no longer available for purchase. So I have since deleted that app in hopes that it would resolve the red badge issue. It has not. Somehow, that old app and the new app with the same name but by a different company has caused the glitch. I have reset all settings on my iPad, I have rebooted, I have deleted the app and still the red badge with the one update for the old app is there. Hmmm. . . I guess I need to take this into the Genius bar or wait for ios 7 in hopes that it will fix the glitch. Thanks again for your help.

Why I lost all the apps needed to be update in the app store icon while I have not updated them yet? Please help.

I am using iPhone 4, and I had about 50 apps needed to be updated, which is stated in the App Store icon. I have not had time to update them until today. However, when I was ready to update all the apps, I found out that there was not any apps in the App Store icon needed to be update. Does anyone knows why? Please help. Thank you very much!

This morning I had the same issue - even though I have pending updates, the app store badge is gone and it says all apps are up to date. I, like many others I'm sure, selectively update apps based on reviews. I'm sure there is either an app store refresh/update on Apple's end or a run on the app store causing errors or issues.
VZW iPhone 4, iOS 5.0.1

HT201328 Does your iphone need to be updated to the newest OS to unlock it?

I haven't updated my phone in about a year it seems because I didn't want the new changes. So I think my OS is 5.1.1. Anyways I got a code from ATT for an unlock which is useless since it sounds like I don't even need a code, however my phone won't unlock. I have tried a few times to erase and restore my phone and nothing indicates an unlock. So, could it be the OS? Or is there some other step I am missing? thanks.

nikkap wrote:
I haven't updated to the latest software because I didn't want my google maps to change to the new version they made with poorer directions.
To each their own, but you can always install the Google Maps app.
nikkap wrote:
I also didn't want to lose battery charge quicker and didn't want certain functions to cease working like wifi which I've heard has been a problem. It just seems that since my phone is so 'old' that updating it could cause more harm than good.
Nothing is further from the truth. Installing updates does not cause hardware issues or hardware to stop working. Anyone that tells you otherwise is completely ignorant.
I (and millions of others) have installed iOS updates with little or no adverse affects. The vast majority of issues that arise during an iOS update can be rectified with basic troubleshooting from the User's Guide.
There is no legitimate reason to not update the iOS which adds new features and fixes security issues in iOS.
nikkap wrote:
My other problem is that someone proxied the call to ATT to obtain the unlock so I don't know exactly what happened and if in fact they did agree to unlock or perhaps lied instead or did something else. But I don't have the account information for ATT since it's a group account so i'm SOL.
Well, there you go. You need to contact AT&T or get the correct information and go to AT&T's website and request the unlock.
There are no codes, as you've already found out.
Once the unlock has been approved, AT&T will email you to let you know it has been processed and that the next step is to restore the device.

Need to display/update last date/time of an accessed record

Hi All,
I'm using ADF BC and I have a use case where I need to display the last date/time when a user access a record in a view. I have a user table that I access thru a view object where I can store the date/time of the fetched record. A viewLink from that view object gives me the detail information in that record.
I generated a ViewRowImpl class and added this to the method that get the time and date (DtHeureDernAcces is a private variable in defined in the class):
/**Gets the attribute value for the calculated attribute DtHreDernAcces
public Date getDtHreDernAcces()
if (DtHeureDernAcc==null)
DtHeureDernAcc=(Date) getAttributeInternal(DTHREDERNACCES);
setDtHreDernAcces(new Date(new java.sql.Timestamp(System.currentTimeMillis())));
getApplicationModule().getTransaction().commit();
return DtHeureDernAcc;
This works fine until the user refresh the page, in this case the ViewObjImpl is recreated and DtHeureDernAcc is then null. So the date/time is updated after each refresh.
How can I get around this problem ?

The complication here is that &P7_DATE_SHIPPED. and &P7_DATE_ORDERED. are session-state variables - they don't actually get updated until the page submit completes, which is happening AFTER the dynamic action.
JavaScript might provide an alternative method that will pick up the current values of those fields. You might try something like:
HTML Header
<script language="JavaScript" type="text/javascript">
function check_hours(pThis){
var v_shipdt = $v("P7_DATE_SHIPPED");
var v_ordrdt = $v("P7_DATE_ORDERED");
if(v_shipdt > v_ordrdt){
alert("Shipping Date is before Order Date!");
return true;
</script>Put this in the HTML Form Elements Attributes of your page item:
onchange="check_hours(this)"This is just pseudocode, but it may help get you started. Dates in JavaScript are a little tricky to deal with.

Exchange rate difference account at the time of billing accounting document

Hi Experts,
We have some new requirement when we are doing billing in vf01. We are maintaining 2 exchange rate type in one FI document(For customer account we are maintaining M rate and for revenue accounts we are maintaining spot rate when we are converting into Group currency in FI doc). To maintain 2 exchange rates in FI doc we wrote some ABAP code.. but the FI is not being generated. we are getting below error..
FI interface: Small difference * USD 30 cannot be distributed
Message no. F5735
Diagnosis
A small discrepancy of * occurred in currency USD for currency type 30 in the FI interface due to a rounding error.
Because the discrepancy is caused by a system error, it cannot be corrected.
Procedure
Notify the SAP Hotline.
Could any one give the any suggestion to go forward...thanks in advance..
Regards,
Srinvas
Edited by: sandhati10 on Jun 9, 2010 9:20 AM

Hello
There is a SAP note 357758. Please refer the same and also contact SAP OSS.
Rgds

Ipod need to be reset all the time

Hi recently my Ipod is acting weird. if i don turn it on for 1 day the following day i need to reset it else nothing happens.
Is this supposed to be happening? I didn't hv this problem before.

Anita,
I know you said that you need to reset your iPod (and by that I take it to mean you have to do it yourself), but are you aware that the iPod resets itself after being left inactive for a period of 36 hours or so?
See iPod Sleep.

Airport express in another room needs to be on all the time!

I'm running airport express on my stereo in my bedroom. it needs to always be "on" so i don't have to get out of bed to select which audio output is active. is this possible? please help.

Is this message box indicating the Airport Express is re-connecting to your internet service and if so, is this Airport Express connected to a DSL internet service that uses the PPPoE protocol to connect? If so, run the Airport Admin Utility, select your Express, click on the Configure button, click on the Internet tab, and check the box to "always stay connected". Update settings to the Airport Express.

Pick Currency rate at the time of Billing

Hi Friends,
When i post billing document in finance at that time currency rate fetch form currency master not from Sale Order.
For good answer i will give good points.
Thanks,
Hemant Kumar

Hi,
Foreign exchange rates in SAP system are picked from table TCURR(OB08 T.code).
Aravind

HT4009 All my apps need to be updated but the billing keep showing and I don't wanna purchase

Just wanna update my apps need to updated on my iPad

Apple requires a credit are to be on file regardless of if you purchase something or not. You can change this by visiting: applied.apple.com. Login to your account and navigate to payment method. Select none.

How do i add a letterhead (company logo) to certain pages of a pdf document? Need to do this all the time!

I need to add letterhead/logo as a header and footer to certain pages of PDF document. Can I set up a template header and footer that I can select to go onto certain pages of document?
When I try to add a header in Adobe Acrobat X Standard it only lets me add letters & numbers and not a jpg image logo.

You could setup stamps, one for the header and one for the footer. Then apply and place the stamps. It may be you can create one stamp to do the job as long as the background is transparent. I am not sure about templates since it is an area I have never played with. Consider these as ideas to try. Not sure how well they will work. If you wait around, someone with better input may drop by.

Condition exch.rate KOMV-KKURS needs to be updated at the time of billing.

Similar Messages

Maybe you are looking for