Condition PR00 not appeared in customized pricing procedure

Hi Gurus
I have customized Pricing Procedure RVAA01 to ZVAA01.
ZVAA01 is already consists of PR00 & PB00 condition types.
I have also maintained the condition record (VK11) for the sales orgDist. ch material+customer combination.
But Billing doesn't show the PR00 condition at all.
How to fix this issue.
Regards
RG

hi R G ,
Please whether the system is using the same pricing procedure for billing document that of the sales order- (i am assuming that in sales order it is populating the conditon typwe pr00)by going to the condtions tab in vf01
if yes it should flow check in ovkk what is the pricing procedue that is allocated to the combination of sales areadoppcupp(cust pric proc.),
here dopp(doc pric proc) of sales order and bill should be same like A
upadate me with the above findings so that i can propse the other solution
revert if helpful
Mohit Singh

Similar Messages

Condition Type not displaying on the pricing procedure

Hello We are copying a sales order contract with reference to a sales order but we want a condition on the contract pricing procedure to be determined. Now I know I could redetermine pricing by selecting these option but we can't do that as there could be a year difference so we need the old pricing. B Carry out new pricing C Copy manual pricing elements and redetermine the others e.g. Sales Order Pricing Procedure XXXX Conditions ZPR0 Conditions ZHD1 Create Contract with reference to sales order Contract Pricing Procedure yyyyy Conditions ZPR0 Conditions ZHD1 Conditions ZNEW In the analysis the condition ZNEW has the "Condition without condition record (not relevant)" As I mention in new pricing it appears

Hi Roy,
Trust you are doing good,
I have gone through the question which you have asked but its not clear what do you want to exactly do.
Pricing Procedure XXXX Conditions ZPR0 Conditions ZHD1 Create Contract with reference to sales order Contract Pricing Procedure yyyyy Conditions
Here you talking about two different pricing procedures..or you talking in terms of pricing values.
Please highlight.
Thank you,
Regards
SRT

Varient condition is not picked in the pricing procedure.

Dear Friends,
I am creating a sales order where, I am getting a message that VA00 condition is not determined. I analyze the pricing,and find out that the condition record is not determined by the system. Message number is 106. I already maintained the condition record for VA00.
Thanks,
Abhishek Kumar

Hi,
Only if you have created the variant and assigned the same in VK11 then the system will fetch that during pricing
otherwise for VA00 manual entries has a priority so you can add the condtion type manually and give the value to it manually.

Excise condition types not appearing in the Delivery document pricing

Hi,
This is a scenario of sales from an Exciseable Plant.
The client has pricing requirement at delivery document.
I have configured the pricing at Delivery document, but the Excise condition type (JEXP) does not appear.
We are maintaine ED values at control code level and control code field is not availabe in LIPS, i tried adding the field in LIPS structure but still the ED condition type does not appear as program is not identifying the control code field in delivery.
Can you please let me know the solution for bringing Excise condition type in the Delivery document pricing procedure.
Regards
Venkat

Changed the Condition Category from 'F' to 'L'.

Tax Conditions types not appearing in CRM orders and quotations

Hello All,
I have created a new tax condition type in ECC and through initial load replicate the same to CRM. pricing procedure repliction with new tax condition is also successful.
But, the new tax condition is not appearing in condition tab at item level when i create quotation in CRM. other condition types are coming. data for this condition type is there in custom condition table. mapping of tax classifiction to tax group is also done in SPRO.
Please advise.
THank and Regards
Sudhir Grover

Hello Sudhir,
You should check the trace log for pricing at first. Set the user parameter:PRC_TRACE as 'X' on T-cd:SU01 for your user and check the Access analysis on the condition tab.
Regards,
Masayuki

Discount condition type not appearing in sales order but in invoice

Hi,
I have two discount condition types (MPDI,ZSDI) in my pricing procedure,at the time of sales order creation one discount condition is not appearing.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
In the billing ,i could see the condition type appearing.I have checked this,but i could not understand why it is happening.Even the condition catergory of condition is empty not L.
Also please find the screen shots below,
Pradeep

Pradeep,
Am sure user might have deleted the condition type in sales order, the same condition type woudl have entered manually in invoice.
Please check my testing, i have done the same entered ZA09 manually and after saving have deleted again in sales order, after dilivery and when i created invoice here i have entered manually the same condition type.
So in your case also the same thing could have happend, check the change log and also in invoce condtion tab check the condtion type in analysis ( Invoice analysis not order). so that you can udnerstand whether it was entered manully or not.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
This is because in the condtion tyoe the abvoe key combiantion was found with records hence the below key combition was ignored. this you observe in your screen shot with with 5.00
So my guess is the condtion records was deleted in sales order.
thanks,
srinu.

Condition type not appearing in PO line item

Dear All
I made a condition type Y001 for agriculture tax with below mentioned config. and marked as both header and item condition.
Cond. class A Discount or surcharge
Calculat.type A Percentage
Cond.category B Delivery costs
Manual entries C Manual entry has priority
Now problem is that when I am making contract in contract line item condition Y001 condition is appearing in dropdown and I am able to enter the same in contract and save it.But when I am trying to make a PO by referring the same contract with line item condition Y001, this same condition is not appearing in PO and also it is not appearing in dropdown also so that I can manually enter the same.
Please let me know why system is behaving like this.
Regards
SK

satish kumar wrote:
In short condition type Y001 is appearing in contract line item condition tab while making contract but same condition is not appearing in PO line item condition tab while making PO.
Hi Satish,
Perhaps you have not assigned the pricing procedure to the Purchasing Orgn & Vendor in IMG Schema determination. Have a chk once and if you have assigned try maintaining a PIR and I hope it should populate the priceing procedure and your cond type Y001 in the PO also.
Anything pls revert
Regards
Shiva

Customer Pricing Procedure error

Hello Gurus,
While creating inquiry document in SAP SD I am getting error " Customer Pricing procedure not determined".
What to do?
Please Help

Hi,
Please follow the path as below:
Firstly you need to configure pricing procedure,
1) please go to spro>Sales and distribution>Basic functions>pricing>Prcing control>define and assign pricing procedures> maintain pricing procedure and assign your conditions there regarding of your procedure.
2) customer pricing procedure, and document pricing procedure have standard options. ı think you do not need to maintain new one for them. but you should assign your document procedure to order type and billing type from spro>Sales and distribution>Basic functions>pricing>Prcing control>define and assign pricing procedures> Assign document pricing procedures to order types and Assign document pricing procedures to billing types.
3) Moreover, you need to maintain determination for sales doc. as combination of your pricing procedure+ sales orgdistChdvdoc. pricing procedurecustomer pricing proc.+condition type from spro>Sales and distribution>Basic functions>pricing>Prcing control>define and assign pricing procedures>Define Pricing Procedure Determination.
Finally, maintain your condition records from VK11 regarding of your access sequence. and maintain customer pricing procedure to your customer master from sales area sales tab in customer master data from XD02.
Please check these configurations and I hope these will solve your problem.
Regards,

V/08 conditions do not appear..

Dear friends,
I have created condition types in V/06 SCREEN.. But in v/08 screen, in the pricing procedure these conditions do not appear..
How can I fix this issue??
Thansk

I think you are syaing in V/08 when you do F4 you are not able to see the Z condition types. Yes you will not be able to see. You need to type in manually or look for it specifically in F4 search. Then it will come up.
Hope this helps
Regards
Sai
Edited by: Sai on Jul 1, 2010 9:59 AM

Making Customer Pricing procedure mandatory in BP Role-CRM 5.0

Hi
Our requirement is to make Customer Pricing procedure mandatory in BP Role "Sold to Party"-CRM 5.0. I have configured for the same in IMG Field Grouping. Now when a end user goes for BP creation & goes to Sales area maintenance then an error message is displayed for the same.
But if only general data is maintained then this message is not displayed. Now requirement is to display an error message if a person leaves without maintaining sales data.
Please help me in resolving this.
Thanx in advance.
Cheers
Hits

In the completeness procedure detail, use the object Pricing and field Customer pricing procedure. relevance header / item or both, message category - Error
Hope this helps
<b> <i> IceCube </i> </b>

Customer pricing procedure in Sales transactions

Hello Experts,
In our CRM 2007 we have already customized the pricing procedure of the sales transactions for each sales area / document pricing procedure / customer pricing procedure. But creating sales transactions, our business needs system to take in consideration the customer pricing procedure of the partner in role Ship to party instead of the partner in role Sold to party. Could anybody help telling how to set it?
Many thanks in advance!

well... maybe my question is not clear... the thing is that as a sample, we have a:
1.Sales area = O 50000XXX
2.Sales document type with Pr. Procedure = A
3.SoldTo with Cust Pr. Procedure = 1
4.ShipTo with Cust Pr. Procedure = 2
When we create a sales document, system determines the Pr. Proc. of the doc as it was customized in view CRMV_PRCPROC_DET:
Sales area + Pr. Procedure of the sales doc type + Cust Pr. Procedure = Pr. Procedure of the sales doc
In our customizing we would like to have 2 rows (following the example)
O 50000XXX + A + 1 = ZPROC1
O 50000XXX + A + 2 = ZPROC2
We would need that system checks whether there is any Cust Pr Procedure in the master data of the ShipTo partner.
- If yes, the Pr. Procedure of the sales doc = ZPROC2
- If not, the Pr. Procedure of the sales doc = ZPROC1
but I have not managed to find where to adjust it (nor custom nor BADI). is there any idea or comment?

Deductible tax value is not displaying in MM pricing procedure

Dear Team,
We are using the TAXINN condition for ED,VAT, CST and ST.
ED and CST are the Non-deductible taxes. We are taking the input credit for other two conditions.
All these tax values are correctly displaying in "Invoice tab-Tax". From these, non deductible tax values (ED & CST) are displaying in MM pricing procedure in NAVS condition type. But the deductible tax values (VAT & ST) are not displaying in MM pricing procedure. JEXS condition is also available in MM pricing procedure
Could you pl provide the suitable solution to display these values in MM pricing procedure.
Thanks & Regards,
R.Saravanan
+91 9003024258

Hi,
I've the same problem that you. Do you remember which solution you used ?
Thanks in advance,
A. BARBIER

A custom pricing procedure to be used for product catalog via IPC

Hi all,
I am new to IPC and E-commerce concepts.I need all your valuable help to work on the below scenario
I have an existing custom pricing procedure zcustom on the order document in ECC system which needs to be used on the catalog pricing. In simple words customer specific pricing is to be viewed by dealers in the Product Catalog.
I have also gone through the PricingUserExit Manual and have understanding on the basics.Please give me steps that I can follow to get a solution for this scenario.
Thanks and Regards
Deepika

Hi Deepika,
Please check this note [1126537|https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1126537&nlang=E] .
The attached document 'Pricing_in_SAP_ECO.pdf' describes how pricing is done in your case. I think chapter 1.1.1.2 refers to the situation you describe, it tells how the pricing procedure is found and which attributes are available. Other attributes have to be added via customer exits.
Best regards,
Christoph

TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's

Customer pricing procedures As default value in BP Transaction (CRM)

Hi,
Is it possible to set a default Customer pricing procedure in transaction BP when choosing a Sales Area?
My problem is that we set just one Customer pricing procedure and the field is set as compulsory. But in some cases users manage to save the BP without precising the customer pricing procedure. Since it"s compulsory the replication to SD ends as a Bdocs notice partially sent BP to SD.
Most users have a red messaging saying they have to fill in the field with a "standard' customer pricing procedure but sometime they find a way to switch to next sales area without setting this information.
Thus came to my mind to set a default Customer pricing procedure so that users wont forget.
Is it possible?
Many Thanks

Hi
did u try to have a look into the BAdI BUPA_INITIAL_SCREEN_IMP??
I think your requirement shoul be anyway intercepted by a BAdI.
Regards
CArmine

Condition PR00 not appeared in customized pricing procedure

Similar Messages

Maybe you are looking for