Condition record is missing in sales order

can u please help me on my issue,my issue is in my sales order there are the different types of materials are there,on which the tax is applicable as12.5% on few materials,20% on few materials,on service materials tax is 10%, 2%, 1%,depending on this i have mapped the conditions and it is calculating accordingly,but when i see in sales order by selecting one material,when i go to conditions,analysis of that particular line item,it shows 10% 2% 1% condition records are missing,same wise verse when i select another condition and see the analysis it shows 12.5% condition record is missing,when i go and select the another condition,if i check the analysis it shows 20% tax condition record is missing,but its not throwing any error,and showing document is complete,can any one suggest is it the right procedure or i have to make any changes in to it.

Hi
I see no issue in this. It is correct system behaviour.
When you have different tax rates for different materials, obviously the condition records will be accessed based on the entries maintained for each material.
E.g For material with 12.5% tax rate when you check in vk13, you will find only that entry and no entries for 20% and 10%, 2% and 1%.
So the access sequence fetches only what has been maintained in VK11 for each material.
This is absolutely fine. Go ahead and save the order.
Regards
Madhu

Similar Messages

Condition records wrongly populated in sales order instead of billing doc.

condition records are maintained billing wise to populate in the billing document for pricing condition where as while creating the sales order itself i am getting the condition records populated in the sales order which is not correct as it needs to populated in the billing document only

yes after looking at pricing analysis itself we have concluded that these condition type has the key combination billing document F2 and displays the condition record within the sales order itself, but this condition record with key combination billing doc. F2 should be populated in billing doc only what is the reason behind this

Report on Change in Condition Record effects which all Sales Orders

Hello Gurus,
Thanks in advance. My customer requires a report which gives him list of Sales Orders effected due to Change in Condition Record.
Proper input to this will be greatly rewarded.
Regards,
Vishvesh Kamdar

hi,
whenever u change the condition record it will fall under the validility date, ie.,
example:
Condition record for cond type PR00 is
valid from 01/05/2007 to 31/99/9999 is Rs.1000
but suddenly when u change prices on 01/10/2007 then system will display has below
vaild from 01/05/2007 to 31/09/2007 is Rs.1000
vaild from 01/10/2007 to 31/99/999 is Rs.1500
hence u take all the sale orders & billing document which are created from 01/10/2007, this will slove ur purpose
SE16-->vbak--->enter -
> here u will find created on enter the date & execute
hope this heklps u
regards,
Arunprasad

G/L account no missing in sales order-issue

Hi Experts,
I am getting error: G/L account missing while saving the sales order.
It is available in incompletion log, when i choos that it is going to item conditions tab directly.
It seems related to VPRS condition type, because that sales order related to free goods sales order.
There is no pricing condition type, only VPRS condition type is thr.
Please help us to solve this issue. What would be the reason, is there any costing assignment required?
Regards
Lakshmikanth

Dear Lakshmikanth,
To analyse the cause of the error:
VA02 --> Key-in Sales Order No. and Hit "Enter" --> Double Click on to Sales Order Line-item --> Tab: Condition --> Sun-Tab: Analysis
on to next screen, For your Condition Type, check what condition records are missing.
This will help you to maintain Relevant Condition Record, to resolve error.
For Example:
In VKOA, G/L might not be maintained for Condition Type: KOFI/ KOFK.
Best Regards,
Amit
Note: You may also post the Error-Analysis for our understanding.

Condition type not coming in sales order

Hi,
we have a condition type Z026. The issue is that it is not set in the order but the condition records exists. The pricing analysis shows that condition reocrd is missing but the fact is the condition record is there. The acess seq is Z026 and there are many tables in the acess sequence.
The first table in the access seq is 906 and the condition record exists but still the system says that the condition record is not found using cond preliminary step (header fields like customer/sales org/div). the cond record is maintained for relevant sales org/dist channel/customer/material. cond preliminary step means that system first looks for the header fields but everything is there.
The condition is active and the conditon is created on 21.7.10 with validitity from 21.7.10 to 31.1.2010 and the pricing date in sales order is 27.7.10. so everyhting is fine but yet the condition is not coming in sales order
what could be the issue.
regds

Hi,
Now try creating a sales order with 20.07.2010 as the pricing date. It will work. Create another order with 21.07.2010 and it will not work. If so, it is due to the validity date. When you give 21.07.2010 as validity date and there is already another record which was valid on that date, the gap of one day can happen and we have experienced this. There is even an OSS note explaining this concept, which makes sense business-wise.
However you check the scenarios I have mentioned. If the behaviour is as I have mentioned, then you have to change the pricing date of your problamatic sales order to one day earlier, or move the validity date one day earlier.
If the behaviour is different, pls lemme know

Discount condition type not appearing in sales order but in invoice

Hi,
I have two discount condition types (MPDI,ZSDI) in my pricing procedure,at the time of sales order creation one discount condition is not appearing.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
In the billing ,i could see the condition type appearing.I have checked this,but i could not understand why it is happening.Even the condition catergory of condition is empty not L.
Also please find the screen shots below,
Pradeep

Pradeep,
Am sure user might have deleted the condition type in sales order, the same condition type woudl have entered manually in invoice.
Please check my testing, i have done the same entered ZA09 manually and after saving have deleted again in sales order, after dilivery and when i created invoice here i have entered manually the same condition type.
So in your case also the same thing could have happend, check the change log and also in invoce condtion tab check the condtion type in analysis ( Invoice analysis not order). so that you can udnerstand whether it was entered manully or not.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
This is because in the condtion tyoe the abvoe key combiantion was found with records hence the below key combition was ignored. this you observe in your screen shot with with 5.00
So my guess is the condtion records was deleted in sales order.
thanks,
srinu.

New condition in pricing procedure in Sales Order

Dear SAP Gurus,
I want to add one new condition in pricing procedure in Sales Order.
Earlier we were having following conditions.
PR00   (price)                           1000 Rs     (say)
MWST                                     100%    sub cond.
ZSER (service tax)                   12%
ZSRT                                       100% sub cond on ZSER
ZEDU    (Education tax)             3%(on ZSER)
ZEDT                                        100% sub cond on ZEDU
Now I want the structure to be
PR00   (price)                           1000 Rs     (say)
MWST                                     100%    sub cond.
ZSER (service tax)                   12%
ZSRT                                       100% sub cond on ZSER
ZEDU (Education tax)               2% (on ZSER)
ZEDT                                        100% sub cond on ZEDU
ZHED (Higher Edu. Tax)             1% (on ZSER)
ZHET                                        100% sub cond on ZHED
For this I have Done following Customizings
Created new Condition Types (ZHED & ZHET ) by Coping from ZEDU and ZHET respectively.
Maintained pricing procedure with these conditions.
Made condition Record for ZHET through VK11.
But I am not able to set ZHED as 1 %
Please guide where to configure this and how ?
Thanks & Regards
Rajesh

Hello,
Have you maintined the calculation type of the condition type ZHED as A - Percentage ? If no, then maintain the same. If it is already maintained, then let us the error when you are trying to maintain the condition record as 1%.
Prase

VPRS condition not floating in to sales order...

Good evening every body...
My query is VPRS condition not floating in to sales order...
Please give your valuable inputs
I checked Pricing procedure analysis
giving error requirement 004 not fulfilled
Note:
I checked determine cost in Item category (TAN)
VPRS condition in my pricing procedure
I maintained Standard price in Accounting1 tab of MMR
Valuation class I maintained in MMR
VPRS condition type I maintain condition category-"G"
Anything I missed out???
Regards,
Krishna

In my view, the information provided by you is not sufficient to provide you an exact solution.
As based on & differs business scenario to business scenario you are following.
Like whether it is BOM, MTO/MTS, Free Goods, batches, third party sales, Order-related billing or Delivery-related billing:...
Business Process
Source of costing
- Order-related billing
Valuation price of the material master
- Delivery-related billing
Goods issue
Further there are various way to carry out costing at Sales order, like
- Product costing
- Unit costing
So, you can check whether EK01/EK02 or any other cost related is executing prior/take preference to VPRS in your pricing
Also. kindly check your entries for Account Determination for valuation area(T001K) by using TCode OMWD.
If everything is fine, then test run a Sales cycle till Billing, so as to see whether at billing VPRS is reflecting or not.
If in case you need further assistance, do let us know.
Regards
JP

New Condition Table not working in Sales order

Dear All,
I am facing problem in pricing procedure. I have created new condition table(LIFNR & ROUTE), included Vendor(Fwd Agent) and Route in condition table with sales area. I have added that condition table in access sequence and assigned access sequence to condition type. Then Condition type added into pricing procedure and assigned pricing procedure to document type.
In sales order I've added route and fwd agent but while checking in analysis system does not determine route and fwd agent.
Thanks and Regards,
Kaushal

hi,
i have a query to ask why you need LIFNR in condition table creation.
where in sales order it will trigger automatically.
please check the config settings for route determiantion automatically.
so that if route comes automatically into the sales order then from where you will trigger LIFNR.
please clarify.
regards,
balajia.

Condition record is missing

Hi!
When I click the Update button in me21n under Conditions tab, the price does not update. Then when I clicked Analysis, here's what I saw in out VAT amount: COndition record is missing. How do we configure this?
Thanks so much!
Regards,
Paula

create cond record in fv11 for vat cond. possibly jvrd.

Condition type missing in Sales order after client copy

Hi All,
I am technical person and looking for administration part. I did client copy from my Prod to Dev sytem by using export import method. After doing this I am able to view all sales orders but the condition types in pricing element table are missing in Dev client, but the in same sales order in prod, the contion types are exist.
My functional consultant saying its because of client copy but as per my knowledge the client copy has special query to copy the content so this could be side effect of the cleint copy.
Can anybody experienced the same problem before. If yes. please provide me the solution.
Regards,
Ramesh.

Dear Ramesh,
I checked the note,as i said certain tables which is copied might not be available in the dev.As staed in the note also they are pointing on the access sequence.Say for example one condition type you copied from PRD will have an *** seq.But the same *** seq will be in a different order in DEV.As this tables and feilds are client independent.So ask your functional consultant to check that.
As i told you we have faced the same issue but in a different area.Then when i changed the seq it worked.
Please check and revert.
Venugopal

Item condition for only one particular sales order type, manual condition.

Hi Gurus
We have one condition ZXXX, item condition and it should process manually for one particular order type, ZOR. it should not process for other document types like ZOR1 etc.
i did create condition table with S.org/dis chn/div/ sales.doc type. and kept in access seq. and same in condition type ZXXX. and mainatined condition record as with sales area and doc type ZOR.
condition type settings ate like item condition and manaula entries - no limitation.
in pricing procedure i didnt checked manaul, mandoatry and statistic.
but whn iam craeting in ZOR1 and giving manually condition ZXXX, its accepting but as per our condition record it should get only for ZOR... where iam missing the seeting, please suggest.
Thanks
Ramki

Hi Ram,
In my point of view i think so you have to create the new document pricing procedure.
after creating that you have maintain new item catergory determination procedure using the new document pricing procedure created before.
assign this document pricing procedure to your ZOR document type.
now create new pricing procedure by copying the standard one.
after that do the assigning procedure for the pricing procedure by using the new document pricing procedure.
then try to create the order with ZOR and also with ZOR1
Make sure that your condition type is not assign to any other pricing procedure.
if it happens then let me know also.
Suneet Prakash

How to include ZPR0 pricing condition in an exisiting open sales order

Hi...
i have an existing open sales order report. i wanted to include a column of ZPR0 condition in the existing ALV grid..i hav to add this ZPR0 pricing consition for intercompany STO...The delivery plant is LFA1-WERKS. how do i proceed.??? plz help me!!

For sales order..
vbap-werks WAS MY REFERNCE IN THIS...
i fetched (VKORG,VTWEG) from t001w.. with that i gt KNUMH(FROM A004) table.. with the knumh(condition record number i gt KBETR AND KONWA from KONP.....
Similarly i gta do it with an STO.
LFA1-WERKS is the delivery plant.
how shud i proceed in this

Condition type not determine in sales order

I have condition record maintained for the condition type as per the order reason. When I create the sales order system is not reading the condition record so no condition type is getting determined. Pricing date from the sales order is within the validity period of condition record.Parmeters are also matching but still in the sales order condition type is not getting determine.
Thanx
PNU

In that case, do update of pricing.
To do that, Sales Order - Item data - Condition Tab - Click Update button and choose option B - Carry out new pricing.
To know who manually remove this.
Choose Enviroment from menu bar in sales order - choose Change for display of change in the doc.
Regards
JP

WBS Field Missing in Sales Order

Hi,
I am using ECC 6. I created a Sales order with a line item. I click on the line item and go to Account Assignment Tab. But the WBS field is missing.
But in the Sales order overview screen i can see the column for WBS element which is in uneditable mode.
So i am not able to assign the WBS element to the sales order.
Please suggest.
Thanks & Regards,
Kabir

Similar to this question:
I need to configure the following scenario in SD:PS:
Example 1
Material Code = 123
Title = Training 1
Delivery Type = Classroom Learning
Language = English
Currency = USD
Price = 1000
LU = 24
Example 2
Material Code = 123
Title = Training 2
Delivery Type = On Demand
Language = French
Currency = EUR
Price = 800
LU = 16
I used variant configuration:
I did the following:
1. Created a configurable material 123 with material type KMAT
2. Created a class1 with variant class 300
3. Created characteristics title, delivery type, language and pricing
4. Assigned values to each characteristic like titleu2026training 1 & 2, delivery typeu2026Classroom & on-demand and languageu2026.. English & French
5. Pricing I attachedu2026.Table SDCOM, Field Name VKOND
6. Dependency is:
$self.LMSPRICING='CLASSROOM LEARNING ENGLISH',
$self.LMSPRICING='ON DEMAND ENGLISH',
$self.LMSPRICING='CLASSROOM LEARNING FRENCH',
$self.LMSPRICING='ON DEMAND FRENCH'.
7. Created configuration profile and CU50
8. Attached characteristics in condition type VK00
I am in a dilemma. If I activate strategy 25 (MRP 3) in my KMAT material..I get my BOM in the sales order but account assignment field WBS vanishes.
If I remove stragey 25 I get my WBS in the sales order but my BOM vanishes!
Any way out

Condition record is missing in sales order

Similar Messages

Maybe you are looking for