Condition record's not getting copied in local client copy !!!
Hi ALL,
I have a one question/doubt regarding local client copy.
Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
Message no. VJ000u201D
Can u pls suggest proper way to copy/transport condition record in new client created?
Regards,
C Singh.
Please refer below link
http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
Regards,
Pavan
Similar Messages
-
Item level pricing condition record is not getting recognized
Hi,
In our scenario we have to maintain the additional charges based on Plant. For this purpose I have created the condition table 900 which contains the following fields
Sales Org/Dist Chal/Divi./Plant
I have maintained the condition record for the table, Which has been downloaded to CRM successfully.
When I create the order in CRM price of the product is getting recognized where as additional charges condition records are not getting recognized.
When I check the Access I found that header level data .i.e. sales org/dist chal / divion has been recognized and plant has not been recognized that values are like this 00000000000000000000000000
I have checked the plant it has been downloaded successfully to CRM
So, can anybody help me out?
ThanksHi,
Check in the access sequnce exclusive indicator activation, it might be selected to the previous Condition Tables, if it is selected than system will not check further available/maintained condition reocrds.
Regards
Naren.. -
Condition type is not get in the PO output
Hi,
I have defined a new condition type ZRA0- Discount as discount charges .
The condition type is not getting print out in PO copy.
The vendor wants to see in the PO copy.
Pls suggest how to configure
Regards
SpHi,
If i understood your problem, you would like to print the discount in PO print copy along with price.ok.
then check with your Abaper,he can fetch the Discount value for that perticular condition type(ZRA0) & print in the PO copy.Its depends on the print programme to get the data from the document to the print out.
Regds -
Local client copy for delta changes
Hello Support,
We have requirement of copying data(local client copy) of last one month. This is a rrepetitiveactivity and has to be done once in every month.
For example, in DEV we have 3 clients 200, 210 clients. They make changes in 200 client and these changes has to be reflected in 210 clients. For changing 1 month data we can't perform client copy with SAP_ALL.
I have an idea that we can perform local client copy using TDMS 4.0 but can we do delta client copy?
So, my question here is
1. Can we perform client copy for specific selected data(by date, for eg last 30days) without deleting existing data?
2. We have step 'Start Deletion of Data in Receiving System' in Time Based Reduction scenario, can we skip this and continue proceed with client copy?
Thanks,
Uday.Hello Uday,
SAP TDMS Time based reduction package copies the whole of master data and customization data along with the transactional data being filtered based on the Data Slice Date Provided.
SAP TDMS cannot be used for a Delta Copy to copy only a months data keeping the existing data in the system. If the requiremnt is to run every month, you could give an approritate slice date and transfer the whole data again using SAP TDMS which would include the latest one month data as well.
It is not recommended to skip the step "Data deletion in Receiver system" and then execute the SAP TDMS package. This can lead to issue during the transfer.
Regards,
Sreejith Rajashekaran -
Payment Terms not getting updated for local Purch Org Vendor Combination
Hi
I have updated the vendor master with new payment term in EBP. The same got updated for Back End Pucrh Org. But it is not getting updated for local Purch Org. I am using extended classic scenario and have BE and local Purch Org.
I anybody can tell me the solution on how to update payment terms for Vendor with local Purch Org. Thanks
Regards
Vinod RaoraneHi
Which SRM version are you using ?
<u>How you replicated the Vendor master in EBP ? Which transactions or programs you used ?
Have you used BBPGETVD Transaction or any other program ?
And also checked the log of SLG1 transaction. ?
Can you see the updated details in BBPMAINTINT Transaction for that vendor
Any other logs you noticed in SLG1 or ST22 Transaction ?</u>
Please refer to following links.
<b>http://help.sap.com/saphelp_srm50/helpdata/en/18/db183d30805c59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/43/1f8c03b8c606f4e10000000a422035/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/d3/4b9c3b122efc6ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/81/e08194b6e4734f8dde536e8b8ac4a0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/92/fd7d3cb7f58910e10000000a114084/frameset.htm</b>
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul -
New Condition table / access not getting picked in purchase order.
I have created a new condition table for the tax to be calculated for Site / Material combination. The access sequence is also crated.
When I created the purchase order the condition / tax is not getting picked. When I checked in the analysis, I found that the error was Access not made (initalize field) for the site. The material is being picked up.
Please note that the site is getting picked from KOMK table ( I think it is a header table), while the site is actually there in the line item level in the po.
Request your help at the earliest.
Regards,
Veena.TCODE OBQ2
Select the tax access sequence. Click on accesses. Tick the right combination required site / article . then click on the fields tab. This will take you to the next screen. There click on the field for which you want to change the selection table and then click on field catalog at the bottom of the screen.
This will take you to the field catalog screen. there select the table and field and then save.
With this procedure you can select the required field into KOMK OR KOMP.
Regards,
Veena. -
Local client copy error - Table "BKPF" not edited due to excessive number
Hi,
I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 -
===
2 ETA163 Table "BKPF" not edited due to excessive number of errors
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "COEP" not edited due to excessive number of errors
3 ETA311 Process "00002" started on server "sfrndevsap15"
(time: "17:20:51")
2 ETA297 Error: Table "ONROV" error in DDIC - Check table with SE14
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "FAGLFLEXA" not edited due to excessive number of errors
3 ETA311 Process "00003" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "FAGLFLEXC :"" 0 0 0 DEL.""
0 0 17:20:52"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "HRP1001" not edited due to excessive number of errors
3 ETA311 Process "00004" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "VSAFVU_CN :"" 0 86123 0 DEL.""
0 29 17:21:21"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "PCL4" not edited due to excessive number of errors
===
Please help ASAP, as this is effecting our testing team. I have tried to copy individual tables also using a transport request number and SCC1 to copy it to the target client. This is also taking quite a long time.
Thanks in advance,
AbdulHi Abdul,
What does your system log say ?
Check this SAP Note
Note 579783 - CC ERROR: Loss of data - table not copied
run the report RSCC_VERIFY to check if the table is consistent within the source client.
SAP will only provide support for RSCC_VERIFY messages if there is a specific problem in an application in the target client that can be assigned immediately to the messages.
RSCC_VERIFY is delivered with SAPKB46B49, SAPKB46C35 and SAPKB46D24. In older releases, you can create the report in the ABAP editor (transaction SE38) in accordance with the attached advance correction. Use the development class or the STRM package for this.
Regards,
Siddhesh -
Can not perform local client copy
Hi Expert,
I am not able to perform the local client copy for newly created on production server as system not accepting standard password 'PASS' for user SAP*.
Same is working fine at IDES server.
Please help
Thanks
GauravHi,
Make sure there's a profile parameter: login/no_automatic_user_sapstar = 0 and then restarted?
U can change the parameter by:
Execute T-Code RZ10 and the select default.pfl form the list of profiles avaialable
then go to edit mode and then click on create
Give the name of the parameter and its value and then save the profile
then it will ask you to activate the profile, Now just click on Ok, it will done
Restart the system and it will work fine.
Or
Just go to RZ10>>>>select instance profile>>>>extended maintanance>>>>change>>>>change the value for parameter>>>>>copy>>>>back>>>>>save&activate
Thanks
Ruchika
Edited by: Ruchika Kapoor on Aug 17, 2009 1:58 PM -
Local client copy not starting
hi... all
i have started a local client copy but after taking 3 hour it not start copy
in sm12 , it shows 2 entries r lock, i have deleted these entries and stop/start mmc. try again local client copy, same enteries r lock in sm12
plz guide me
Best Regard
Imranafter 13 hour the status is given below
In scc3
Target Client 200
Source Client 100
Copy Type Local Copy
Profile SAP_CUST
Status Processing...
User SAP*
Start on 28.05.2009 / 20:08:24
Last Entry on 28.05.2009 / 20:09:53
Statistics for this Run
- No. of Tables 0 of 54540
- Copied Lines 0
In sm12
200 SAP* 28.05.2009 E RSTABLE CLIENT COPY SOURCE 100 0 1
200 SAP* 28.05.2009 E RSTABLE RSCLICOPY 200 0 1
In sm66
Server Name No. Type PID Status Reason Sem Start Error CPU Time User Report
devsap_DEV_00 12 BTC 4324 Running Yes 52043 SAP* CL_SQL_S
in sm50
No. type PID status start time report client user report table
0 DIA 4252 Waiting Yes
1 DIA 4260 Running Yes SAPLTHFB 200 SAP*
2 DIA 4984 Waiting Yes
3 DIA 4272 Waiting Yes
4 DIA 1188 Waiting Yes
5 DIA 4284 Waiting Yes
6 DIA 4288 Waiting Yes
7 DIA 4292 Waiting Yes
8 DIA 4304 Waiting Yes
9 DIA 4968 Waiting Yes
10 UPD 4976 Waiting Yes
11 ENQ 4940 Waiting Yes
12 BGD 4324 Running Yes 52332 CL_SQL_STATEMENT-CP 200 SAP* -
I m trying to do local client copy from 000 to 400 while it has given error that RFC needs to created for FINBASIS component. After searching the net i come across that to do that we need to implement note 568784. However while uploading note from desktop it is giving ABAP Short dump
Runtime Errors : CONVT_NO_NUMBER in progarm SAPLSCWU
any help apprecited
regards
mangeshThis note doesn't actually require that you upload it. In fact, all you really need to do is create the RFC destination (as directed within the note) and then run transaction FINB_TR_DEST.
Hope that helps.
J. Haynes -
Unable to do the Local Client Copy
Hi, Experts
I have created a new client, and i have logged on that client and doing the local client copy. When I see the client copy log the client copy got cancelled.
When i check the log i am getting a error saying "The System's Time Zone Cannot be Determined. Enter it Using STZAC."
The time zone maintained in INDIA.
Thanks & RegardsHello
Perform some checks
Please make sure that SAP time is same as the time on the operating system
Also make sure that u maintain time in the original client i.e the client which u r copying
Also I would recommend that you first delete the new client,then maintain all setting for time zone through the note 667169 and then again try client copy
hope it help
Rohit -
Need Help!! Errors during Local Client Copy
Doing a Local Client Copy and getting these error messages in the log:
Table Name Component Package
/1CN/CMFSAPH0FOR DDIC Error (See SE14)
/1CN/CMFSAPH1FDT DDIC Error (See SE14)
/1CN/CMFSAPH1FFX DDIC Error (See SE14)
/1CN/CMFSAPH2TGR DDIC Error (See SE14)
/1CN/CMFSAPH2TRM DDIC Error (See SE14)
/1CN/CMFSAPH3TCT DDIC Error (See SE14)
/1CN/CMFSAPH3TUS DDIC Error (See SE14)
/1CN/CMFSAPH4TFX DDIC Error (See SE14)
/1CN/CMFSAPH4TQU DDIC Error (See SE14)
Then I go to SE14 then put the name of the tables then click CHECK >> DATABASE OBJECT and then as the result I get:
"Table is not created in the database"
If I go down to the database level and look within the Oracle database dba_tables the tables and objects exists within the database but SAP is unable to recognize them. All objects were imported with a Oracle Data Pump dump file and now I just need help in getting SAP to recognize the tables.
Edited by: Adam Gendle on Feb 19, 2010 12:29 AMHi,
Its showing inconsistency between ABAP Dictionary and the database.
Have you run Test-Run before performing actual client copy ?
Please check the Consistency of affected Tables.
SE11 -> Display Table -> Utilities -> Database Object -> Check
(check DB Object as well as Run time Object)
Please refer this [SAP Note 686357 - Table pool length incorrect after Unicode conversion|https://service.sap.com/sap/support/notes/686357] to get more information. The relevant solution is mentioned there if the pool tables having inconsistency with VARDATA field.
Also refer SAP Note 1171306 - Error with pooled tables when copying a client.
Regards,
Bhavik G. Shroff -
I have fresh installed ECC 6.0 with HP UX. I want to do local client copy.but it give error
lient copy from 03.02.2009 23:20:18
ystem ID............................ QAS
arget client........................ 900
/3 Release.......................... 700
Basis Support Package...............SAPKB70009
ost................................. quality
tart in background............. .....X
ser................................. SAP*
arameter
ource client........................ 000
ource client user masters............000
opier profile:.......................SAP_ALL
able selection
ustomizing data .....................X
ith application data................ X
nitialize and recreate......... X
hange documents are not copied
est mode (without database update).. R
thanks
Manuthanks for your reply.I have set my INDIA time in 001
But during client copy it gives system Log
Details Page 2 Line 9 RSLG0001 - SAP Analysis of the Central System Log 1
Time SAP instance Type Nr Clt User TCode Program Terminal Package Grp N Text
18:16:23 quality_QAS_00 BTC 008 900 SAP* SBAC BY 4 Database error 24909 at SEL access to ta
Details
Recording at local and central time........................ 05.02.2009 18:16:23
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
04523 Background Processor No. 008 SAP* 1 K SAP Web AS Problem SBAC
Module nam Line SQL functi Table Name
dbrepo 2655 SEL REPOLOAD
Documentation for system log message BY 4 :
After the attempt to access a database table the database system has
returned an error code which indicates that the operation concerned
could not be performed successfully.
The text of the system log message shows the error number, an
identification of the operation and the name of the table concerned.
The following abbreviations are used for the database operations:
CLC - Closing a database cursor
CRT - Creating a table on the database
DEL - Deleting table entries
EXE - Immediate execution of a database operation
FET - Reading one or several records of a database cursor
INS - Inserting one or several records into a database table
PRE - Executing a PREPARE operation
SEL - Executing a database selection
UPD - Changing one or several records in a database table
echnical details
File Offset RecFm System log type Grp N variable message data
1 135000 g Database SQL Error BY 4 24909 SELREPOLOAD dbrepo 2655
Plesae suggest
RAJ -
Local Client Copy Error in Post-Processing
Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice. Also performed the update statistics on db.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
AntarpreetHello Gagan,
I am facing the errors in table /SAPCND/CC_GROUP_WS_NG belonging to component AP-PRC-CON. It says post processing required.
The oss note says about component FINB-TR-DERIVATION.
I am not sure whether it is good to run the steps as mentioned in oss note 1235955.
Thanks for your response and look forward to further help.
Regards,
Antarpreet -
Local Client Copy error in post processing phase
Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
AntarpreetHi,
You need not worry at all as this is not a warning (although marked
so in message), and its just an information so you are better able to run
the job RGUGBR00 in SE38 with all the options mentioned in message above
marked.
Regards,
Aidan
Maybe you are looking for
-
My nano won't sync and I keep getting the error code 13019
I had a computer crash and have been trying to move all of my itunes library over to my new computer. I got that accomplished today, added new music and got my itunes library all filled up how I want it but now it won't sync with my ipod. It says "
-
MSI Eclipse with 12gb ram only posting 8gb (and other issues)
I have several issues with my eclipse motherboard, the first problem has to do with RAM Dimm slot's AO, A1. PROBLEM 1 A little back story on the situation, earlier today i adjusted my green power genie to max power cooling - it down clocked the vol
-
Songs not playing all the way through.
When playing songs in iTunes, whether bought in iTunes or not, sometimes the song stops playing with 30 seconds left and goes to the next song. Why is this happening and how do i fix it?
-
Hai, I am working with a BW system for which data is being reported from an infocube. There are errors in reports and after analyzing everything I came to know that the problem is with cube data. Some of the records in Infocube have too many
-
In state of crisis viz a viz Eudora and Lion, please help
I have been using Eudora 4-ever, and depend on it completely. It came as a SHOCK after I bought a new MacBook Air with Lion to find out that I cannot run Eudora on it. I have had my Air for a month now without using it yet because I don't know what