Condition Record with same

Hi all
SYSTEM GIVES AN ERR MESSAGE " THE CONDITION IS BEING PROCESSED IN THE CURRENT SESSION">
Our company wants to maintain different prices for different packages of same material.
i.e REQUIREMENT IS TO MAINTAIN DIFFERENT PRICES FOR SAME MATERIAL WITH DIFFERENT UNIT OF MEASURE (UOM)
Material      Amount      Uniit      per      Unitof Measure           Valid from              Valid to
XYZ           1000            inr        1             Z1                          01/11/2010          29/11/2010
XYZ             500            inr         1            Z2                         01/11/2010           30/11/2010
where Z1 = 1 litre
            Z2 = 1 mililitre
System does not accepts the second line, saying the condition is being processed in the current session. Could anyone please give a solution for this.

Hi,
You cannot maintain different prices for the same material based on UoM. You have to create different materials based on the pack size.
Regards,
Palani

Similar Messages

New info record with same details as archive one.

Hi Experts,
Due to some issue we want to archieve some standard info record which are created on vendor / material group / plant basis.My query is does system allows to create new info record with same vendor / material group / plant combination after archiving earlier record which is on same basis.
Thnaks & Regards
Vinay

Hi Jurgen,
Thanks for reply.
Our issue is while creating work order(IW31) having external services upon entering info record number in some cases in same client rate is picked up from info record condition but some times from last purchase order based on info update.
We have checked following points.
1.In all the cases work order type is same.
2.Info record are of standard type with same condition.info record are for vendor & material group combination.
3.Checked after changing rate in info record and in purchase order but similar issue exists
4.Compare vendor master also.
5.Their are no contract /sch.agreement for vendors.
Our requirement is to have rate from info record in all the cases in work order.So have two options.
1.Archiving info record-But will need setting in SPRO and also need to create same record again with same combination.Also as their are recent purchase order against those info record not sure whether system will allow or not.Can you please tell what are prerequiste for archiving info record.
or
2.To remove only purchase order number updated in EINE table in those info record where this issue is occuring.We have checked in development system and after removing purchase order number in EINE table it picks up rate from info record.
So thought of checking before removing order ref.from EINE table.
Thanks
Vinay

Duplicate record with same primary key in Fact table

Hi all,
Can the fact table have duplicate record with same primary key . When i checked a cube i could see records with same primary key combination but the key figure values are different. My cube has 6 dimentions (Including Time,Unit and DP) and 2 key figures. So 6 fields combined to form the composite primary key of the fact table. When i checked the records in se16 i could see duplicate records with same primary key. Ther are no parallel loading happening for the cube.
BW system version is 3.1
Data base is : Oracle 10.2
I am not sure how is this possible.
Regards,
PM

Hi Krish,
I checked the datapacket dimention also. Both the record have same dimention id (141). Except the Keyfigure value there is no other change in the Fact table record. I know this is against the basic DBMS primary key rule. But i have records like this in the cube.
Can this situation arise when same records is there in different data packet of same request.
Thx,
PM
null

Create condition record with reference to existing condition record

how to create condition record with reference to existing condition record?

Hi,
See this link :
http://help.sap.com/saphelp_47x200/helpdata/en/de/7a8534c960a134e10000009b38f83b/frameset.htm
You can create with reference with Tcode : VK14 (or VK34)
Or in VK12, you can copy condition records with copy rules.
Regards,
Lionel

Error Record with Same Key

Can anyone help me out with a master data load failure.
My request goes off red and the message looks somehow like "Record filtered in advance as error records with the same key exist", "Filter out new records with same key". I have already checked the duplicate handle record setting in DTP. Still why am i getting this error.
Would appreciate if some one could suggest me in this.

Hello Shridevi M ,
When I execute my DTP, I get a master data load failure : "Record filtered in advance as error records with the same key exist" . It's the same as you get. Please tell me how did you solved this probelm?
Thanks in advance,
Abdellatif

When we click on the copy botton record with same name should not be saved

Hi,
Copy button will copy the record with the same name and will save it.our requirement is when we click on the copy botton ,record with same name should not be saved
we are performing this task in custom object 12 and exposed Opportunity Name in the layout.
Records with same Opportunity Name should not save ..when we copy the record
Can we perform any field validation on Opportunity Name field?
Please help
please email me @ [email protected]
Thanks
Srinivas Merugu

Opportunities that are assoicated to the same account cannot have the same name. You cannot make this unique for your whole instance. The only way that you could do this would be to create a webservice application that checks this before you save the record.
What about defaulting the name each time this could make the record unique?

Two records with same key (Infocube)

Hi,
I was trying to do, in a update rule, an "IF" condition with two key figures.
IF Kf1 > Kf2. result = Kf1 else result = Kf2.
But the data in the source (datamart Infocube to infocube) have tow records with the same characteristics combination (the same keys)and different amount in the keyfigures, then the result of my "if" condition is not the expected because I understood in the infocube only exists one characteristics combination. :S
I was seeing those records in the manage transaction of the infocube.
Some reason for this?
Thanks and regards
Victoria Leó

This can happen with parallel loads. Two rows with same set of Char values but in different packets of the same Request, being loaded at the same time.
It really shouldn't be an issue - your update rule will make the KF change as desired. Your queries aggregate KFs based characteristic values, not Dim IDs, so you'll get the totals you expect.
Here's some more info:
There is an RSRV Test that lets you check a dimension for a cube to see if multiple DIM IDs exist for the same combination of Chars - Multiple Entries in Dimensions of a (Basis) InfoCube
Output looks like:
12:02:24 o'clock on 08/25/2006: Start test run for user PIZZAMAN:)
Dimension ZFM_C521: DIMID 61,215 and 61,214 have same characteristic values
Dimension ZFM_C521: DIMID 61,880 and 61,879 have same characteristic values
Dimension ZFM_C521: DIMID 61,366 and 61,365 have same characteristic values
Dimension ZFM_C521: DIMID 61,368 and 61,367 have same characteristic values
12:02:24 on 08/25/2006: Test run for user PIZZAMAN:) completed
You can run the Correct Error option to have it update fact rows to use one of the DimIDs if you want, but unless you have lots of them, I even wouldn't bother.
Here's the description of the test:
Description
This elementary test recognizes whether there are several lines that have different DIMIDs(dimension table key), but have the same SIDs for the selected dimension table for the InfoCube specified. (This can occur by using parallel loading jobs). This has nothing to do with an inconsistency. However, unnecessary storage space is occupied in the database.
Repairs
Since the different DIMIDs with the same SIDs are normally used in the fact tables, they cannot simply be deleted. Therefore, all of the different DIMIDS in the fact tables are replaced by one DIMID that is randomly selected from the equivalent ones. Before a change can be made to the database, the consent of the user is requested.
DIMIDs that have become unnecessary are deleted in the connection. In doing so, not only are the DIMDs deleted that were released in the first part of the repair, but so are all of those that are no longer used in the fact tables (including aggregates). The consent of the user is again requested before this change is made.

Error in sharepoint external list while creating record with same id (this id is primary key)

Hi,
I have created one external content type in sharepoint designer to insert/update/delete table data.
This table contains Primary key constraint.
Then I have added this external content type to Sharepoint out of box List.
Insert/Update/Delete is working fine. But when I am trying to insert record with the same id which is already exist in table, page crashed and its giving me following error:
“Violation of PRIMARY KEY constraint 'PK_tbl_Accounts'. Cannot insert duplicate key in object 'dbo.tbl_Accounts'.
The duplicate key value is (1). The statement has been terminated.”
So I want to handle this exception. Can we show any popup message to hide this error?
Thanks & Regards
Rajni

Avoid entering of primary from form if possible.
if not try to customize the new form with infopath and place your custom logic there.
http://lightningtools.com/uncategorized/modifying-external-list-forms-with-infopath-2010/
http://salnikan.wordpress.com/2011/07/26/prevention-of-duplicate-entries-based-on-two-or-more-columns-in-a-sharepoint-list/
Bala

Questions about VK34 (create condition record with reference)

Hi experts,
When clicking the botton "copy condition" via VK34, an error message pops up. It says the error is due to no definition of select rule. I use the standard condition record PR00.
Q1: How to define "select rule"?
Q2: Any chances to download condition record when using VK13 or VK33?

Hello Colleague.
This Unicode problem occurs mainly with pricing reports (recognized by report names that start with /1SDBF12L/RV14AK).
To regenerate these, call transaction V/LE or use transaction SE38 to execute the report RV14ALLE.
Leave the selection screen empty and execute (F8).
See SAP note 497850.
If you have further questions about the generation in the condition maintenance, I recommend to read Note 886771.
I hope it can help you.
Regards
Ruy Castro

Purchase info record with same values

Hi,
I want to create purchase info records with the same material vendor purchasing org. plant ,how can it be done.
This is required because it is possible for the same vendor to deliver material for the same plant and purchasing organisation.Is there a workaround or any reason for this.
Regards

In SAP , this is not possible to have 2 different inforecords for the combinaiton of MaterialVendorPur orgPlantinfo record type
could you please explain more regarding the requirement ....
Regards
Mani

COPA condition record with quantity scale value

Hi Expert,
My client wants to calculate value of AIrport Ground handling charge based on number of landing. My client has entered into an agreement with GH service provider where cost varies with the number of landing. for example
cost for first 100 landing at a location will be Rs 2000. then Cost of 101 to 200 is Rs 90.
So in case to total landing for a month amounts to 110 number. the expense to be booked would be
100*2000 = 200000
10* 90     =       900
Total             200900.
Can this be done   through COPA condition record feature? If yes How
Thanks in advance
Pankaj

Hi Sreedhar,
                 I am quite surprised with this requirement from the customer, Anyways this cud be acheived by the following ways...
1.The condition in the pricing procedure shpuld not be a mandatory condition.
2.In the pricing condition settings you need mainatin the entry 'D' in the manual entries field.
3.Create a condition record for the codition type maintain null values and save the cond record.
4.Create a sales order and check the results..
Lemme know if you got the solution you required.
Regards,
Girish

How to extract data for condition records with different valid periods

Dear Gurus,
There was an error in the recent condition records price upload. Now, i want to extract the data into excel file depending on different valid dates. Please let me know how can i do this... in the extracted file i would like to have fields like, valid on and valid to dates, condition type, price list type, material, condition record no. , last changed date, last changed user id etc., please suggest...thanks in advance..
rgds
suri

hi suresh
create a quick query (SQVI) and extract to excel table KONP
only thing you need to take care is table join for fields datab ( valid from) and tatbi (valid to) you need to take from right table which are present A-table,
Anil

Query to get the records with same last name

I need to write a single sql query to get all records with duplicate last_name's. For example, if tab1 has 4 records:
10     Amit     Kumar
20     Kishore          Kumar
30     Sachin     Gupta
40     Peter     Gabriel
then the query should return
10     Amit     Kumar
20     Kishore     Kumar
id, name,L_name being the 3 columns in table
Apprecite you help.
Thank you
Mary

SQL> create table mytable (id,name,l_name)
2 as
3 select 10, 'Amit', 'Kumar' from dual union all
4 select 20, 'Kishore', 'Kumar' from dual union all
5 select 30, 'Sachin', 'Gupta' from dual union all
6 select 40, 'Peter', 'Gabriel' from dual
7 /
Table created.
SQL> select id
2       , name
3       , l_name
4    from ( select t.*
5                , count(*) over (partition by l_name) cnt
6             from mytable t
7         )
8   where cnt > 1
9 /
                                    ID NAME    L_NAME
                                    10 Amit    Kumar
                                    20 Kishore Kumar
2 rows selected.Regards,
Rob.

Transport Output Condition records with ALE

Hi All.
Does anyone know if its possibel to transport Output condition (mn01, mn04 etc) records via ALE between systems.
It appears to be possible for normal condition records (VK01) but doesn't appear possibel for the output ones.
Any ideas how to set this up so we don't have to manually create these records in all environments?

Hi markjaneasl ,
Check any message type existed for that or not. Better if you post in this ABAP forum.May be you will get proper replies in that forums. Explain the requirement little more.
Regards,
Madhu.

While i am trying to save the existing record with same fields in cloud DTO using flex4 mxml app

hi,
i am doing flex4 web application with mxml tags,
i am having one text box and one datagrid and one save button. text box having one company name, data grid having employee names.
when i click save button which is placed in outside the datagrid it will save all the details in cloud DTO.
Now my requirement is text box having the same company name and when i enter same employee name in datagrid and click save button means it wont
allow to save that record, and through msg box with some alerts.
this is my code:
private function saveRecord():void
 refreshRecords();
 model.employeeDetailsReq=new EMPLOYEEDETAILS_DTO();
 var lengthindex:uint=model.employeeDetailsReqRecordsList.length;
 var i:int;
 for (i = 0; i < lengthindex; i++)
 if((model.employeeDetailsReqRecordsList.getItemAt(lengthindex).employee name==customerdet.selectedItem.employeename)&&
 (model.employeeDetailsReqRecordsList.getItemAt(lengthindex).employeeNumber==customerdet.s electedItem.employeeID)){
 Alert.show("you cannot Add Same CustomerName and Invoiceno again");
(when this line come the error through like this: Index '8' specified is out of bounds.
else
var dp:Object=employeedet.dataProvider;
var cursor:IViewCursor=dp.createCursor();
var employeename:String = employeename.text;
 model.employeeDetailsReq.employename = employeename;
model.employeeDetailsReq.employeeNumber=cursor.current.employeeID;
var sendRecordToLocID:QuickBaseEventStoreRecord = new
 QuickBaseEventStoreRecord(model.employeeDetailsReq, new
 KingussieEventCallBack(refreshList))
 sendRecordToLocID.dispatch();
<mx:Button id="btnAdd" x="33" y="419" enabled="false" label="Add" width="65" fontFamily="Georgia" fontSize="12" click="saveRecord()"/>
employeename and employeeID are datafields of datagrid. datagrid id=customerdet
employeeDetailsReqRecordsList---recordlist of save records
please help .
any suggession or snippet code welcome
B.venkatesan

sorry but you question is not very clear...are you trying to show the item clicked on the datagrid on the input box? with an alert? you should look at "listevent" if thats the case?... sorry i just dont follow.
Miguel

Condition Record with same

Similar Messages

Maybe you are looking for