Condition records for JMIP

Hi
Can any one tell how to maintain condition records for JMIP(BED),JAIP(AED),JSIP(sed)?. Rewards guaranteed
regards
B shar

Hi
I ve maintained through fv11 for JMIP. Now the percentage is showing in PO item detail  -  invoice tab - taxes. But during MIGO still warning message comes BED for excise item is zero. Then i used t code J1IEX for capturing excise . here in the item level - Duty rates tab % is showing for BED (same % maintained through fv11). But in duty value tab no value is coming. If we check the document then two messages comes an error message - excise details are not maintained for vendor, and the same warning message - BED for excise item is zero. What more settings to be done? Pls look into the issue
regards
B shar

Similar Messages

  • Condition records for free Goods

    hi experts
    what are the T codes/path for maintaining condition records for
    freegoods
    product sub
    thanks in advance
    vinay

    Hi,
    CRM Standalone condition records maintain from the  Transaction code
    /SAPCND/GCM - Condition Maintenance, after entering this code give the Application CRM than select your Free goods condition type and maintain the values.
    Configure condition technique correctly for the free godds conditin type
    ( eg : Source : CRM ).
    Regards
    Naren..

  • How to maintain 2 condition record for the same message type

    Hi,
    My requirement is that I have got a PO output type NEU.Now when i release the PO 2 mesages  should get outputed.
    1) A print should go to the Printer ie:Option1 Print output
    2) A PDF should go to the vendor ie:Option 5 External send
    I have completed the config part but I am having a problem while maintaing the condition record for simultaneous output of message 1 & 5.
    In MN04 i tried to maintain 1 & 5 but it doesn't allow me to do so?Why
    How do I output  2 messages while releasing the PO
    KN

    Please check this answered link:
    Re: Two PO Outputs.
    Re: Emailing PO to Vendor, copy to buyer as well
    Edited by: Afshad Irani on Jun 16, 2010 12:05 PM

  • The condition record for use B can not be displayed

    Hi gururs,
    What does this message (number : VE896 ) mean ?
    How to make it desapear ?
    P.S : it's about output type for purchase orders.
    This message is displayed when I click on : "Goto -> Determi analysis" in tcode ME22N.
    Regards,
    Bahia.

    Hi
    It means you are trying to veiw the executed condition record. System found the condition record for entered transactional data which you cannot see by clicking on it (when you see green record in condition analysis).
    For given condition type -> and access sequence/ access - system shows the condition record that is determined. You can see its details by clicking the access which shows the message that condition record has been found with its determined parameters.
    Ex: For batch determination I have set up one search strategy with a condition type (with access sequence). I created one condition record. When creating say sales order -batch determination takes place based on condition record parameters. System shows a green light for determined condition record. You cannot see its details - if you try to see then system issues a message like ''The condition record for use B can not be displayed''. If you want to see click on its immediate predecessor (access ).
    Thanks

  • Condition record for tax calculation

    hi .
    how to populate value for condition type MWAS (outputax)
    where to create?

    hi,
    Tax is determined based on,
    1) Departure Country , departure Zone is taken from delivering plant
    2) Destination Country of the customer receiving the goods( i.e Ship to party)
    3) Tax indicators in CMR >Sale area data>billing tab page& MMR>Sales:sale org data1 view.
    Maintain all the above in the condition records for determining the tax condition rate in pricing procedure.
    Reward if it is useful.
    MCM

  • Condition Records For Tax Condition types for SAP 4.7

    Dear Experts,
    What is the procedure to maintain condition records for tax condition types like CST , VAT and Service Tax. We are not using CIN. In MM01 and XD02 tax classifications i have maintained UTXJ condition Type and also maintained the above mention tax condition types.. But when i create condition records for UTXJ in VK11 the sysytem is asking for Tax code. In FTXP when i defined Tax code A1 for Tax ProcedureTAXIN1 where i maintained all the Tax condition types there.But i am unable to save the Tax % in FTXP.When i try to save the tax code it is not saving.
    Is there any other procedure to maintain Tax condition types for SAP4.7.
    My Pricing procedure that i maintained in V/08 is Z00001.
    Regards
    Jyoti

    Hi Jyoti
    Since you are not using CIN, you can do the follwing for tax conditions
    Check the assignment of the TAx procedure to country
    once u do this , you will be able to maintin the vendor and customer records for MWST  type for taxes
    then create condition records for MWSt with access sequence MWST in condiution type or design one suited to your needs
    alternatevely in the current procedure you can change access sequence for condition type UTXJ form the current one to MWST and then maintain condition records
    hope this helps
    thanks
    Akasha

  • Update condition records for delivery

    Hi
    Can anyone tell me is there is any function module or IDOC which updates condition records for Item level and header level for a delivery??
    I checked the standard BAPI's but they dont do..
    also can we use bdc ??
    Thanks
    Thilothama
    Message was edited by: Thilothama v

    Sorry, can't help there as I don't have access to that environment.
    Srinivas

  • Condition Record for a Header Condition?????

    Friends,
    The Client has a business requirement as follows:
    1.They have over 100 transport vendors to cater to their
    Shipping requirements across the country.
    2.The freight charges are different for all transporters.
    3. These charges are to be put at the HEADER level in the Sales Order.
    6. They do not want to enter the freight charges manually (referring to a seperately maintained freight charges/transporter list).
    6. They want the freight charges to be put at header level AUTOMATICALLY once the Transporter is chosen from the header partner function.
    Is it possible to maintain a condition record for a condition which is defined as a 'Header Condition'.
    To the best of my knowledge, we cannot maintain a condition record for a Header Condition.Header condition means all values are to be put manully.
    Please advise.
    Thanks.
    Mohammed Raheel

    Hi Mate,
    Here you go. This is the best solution and it should work for you.
    Create the fright condition type and uncheck the check boxes header condition and item condition. This action will let you enter an access sequence for the condition type. This fulfills the requirement for having the condition type to be automatic.
    For this condition type to appear only at the header level and not at the item level, this is quite tricky. First thing that struck my mind is to check the "group condition" and point the "grp cond routine* to 1. This does not work because you have unchecked the Header Condition check box.
    The other alternative to acheive the second requirement keeping the first requirement in place is to write a routine and assign it to the requirements column against the freight condition type in the pricing procedure. The routine will make sure that this condition is not picked up at the item level. If it is picked up you delete it programatically.
    Please make sure you do not mark this condition as manual in the pricing procedure.
    This should work.
    Thanks
    Ram

  • Maintain output condition record for KONS

    Dear all friends,
    Anybody help me to maintain output condition record for KONS during consignment cycle.
    when,where and how i can maintain the output condition record for KONS
    thanx in advance.
    best regards,
    Rajesh

    use MRM1 t-code for KNOS.

  • Steps to maintain condition records for MB1B

    Hi all,
    i need complete steps to maintain condition records for
    T Code MB1B for stock transfer between storage locations for same plant with movement type 311
    Your help will be appreciated
    Siddharth

    Hi Siddharth,
    TP b/w st.locs of same plant there wont be any accounting documents generated..so ..no condition records required.....as such,,material will be in plant only...means same valuation area..
    Check the basic rules.....
    BR,
    Krishna

  • Condition records for RFQ outputs

    Hi
    I have seperate output types for RFQ (ZPRS) and PO (ZROP).
    I have created document types for PO and RFQ but both are having same code.
    Z007 - Hiring  Services PO (Category -F)..
    Z007 - Materials Req RFQ (Categ -A)
    Now when i am maintaining condition records for output types of RFQ in T-Code MN01,
    i select ZPRS as output type and trying to maintain the document type of RFQ (Z007), but
    the system takes Doc type Z007 of PO.
    Kindly let me know what is the issue. Because all the output type and document type has been maintained correctly for respective document category.
    Regards
    Madhesh Kumar

    Hi
    At the time of maintaining condition records using MN01 , In the Purchasing document type selection, you can see that the Document types are always listed based on the Document category.
    For RFQ the docuemnt category is A so select accordingly for the RFQ.
    If you are doing a mass creation ensure that you uses the dcoument category as one of the key combination.
    Thanks & Regards
    Kishore

  • Condition Records For output

    Hi,
    Can anyone help me how to find the condition records for output.
    We have for the pick, pack and stage different printing options.
    How can I check it on the system that they have been configured

    go to NACE and check output type V4 for Picking V6 for Handling Unit and V2 for Shipping. You need to configure Pick Slip, Packing List/Delivery Note and HU labels here. Then you can chose out put on delivery for printing.

  • How to maintain price condition record for the following senario

    Hi Gurus,
    I have a scenario where storage charges can apply either per cbm or per sq.mt or  per day.
    for a single customer.
    Another situation --- Handling in Palletized charges per cbm or per pallet for a single customer
    can somebody help me on this.
    Thanks,
    RR

    Hi,
    Scenario 1:
    Go to VK11 tcode and Enter your KAD1 COndition Type.
    Now maintain the Condition Record for your Customer.
    Scenario 2:
    Go to VK11 tcode and Enter your KP00 COndition Type.
    Now maintain the Condition Record for your Customer.
    Note for Scnario 2: Please make sure for KP00, the field Plus/minus in Condition Type setting should be "A"  i.e the Surcharge. It is because the same condition Type can be used for Discount as well as for Surcharge.
    The condition Type setting for KP00 can be done by going to V/06 tcode
    Regards

  • Find condition record for outline agreement

    I want to know how I can find the condition record for an outline agreement.  The condition number is not stored in EKKO and within the ME33K transaction I can view the condition by drilling into the item level (EKPO), but I canot find anyway of linking the agreemtn to the condition table KONP.
    The reason for the qeustion is we want to outpu all agreements that have a certain condition. Any ideas.

    try this code
    REPORT zpwtest .
    TABLES : ekko ,  ekpo , lfa1 , komk , komp , t001 , t001w , komv .
    DATA : tkomv  TYPE TABLE OF komv  .
    PARAMETER : p_ebeln TYPE ekpo-ebeln ,
                p_ebelp TYPE ekpo-ebelp .
    SELECT SINGLE *
      FROM ekko
    WHERE ebeln = p_ebeln .
    SELECT SINGLE *
      FROM ekpo
    WHERE ebeln = p_ebeln
      AND ebelp = p_ebelp.
    SELECT SINGLE *
      FROM lfa1
    WHERE lifnr = ekko-lifnr .
    SELECT SINGLE *
      FROM t001
    WHERE bukrs = ekko-bukrs .
    SELECT SINGLE *
      FROM t001w
    WHERE werks = ekpo-werks .
    CALL FUNCTION 'ME_FILL_KOMK_PO'
      EXPORTING
        i_ekko  = ekko
        i_ekpo  = ekpo
        i_lfa1  = lfa1
        i_t001w = t001w
        i_t001  = t001
        i_kalsm = ekko-kalsm
        i_kappl = 'M'
        i_kvorg = '02'             "Preissimulation
      IMPORTING
        e_komk  = komk.
    IF komk-prsdt EQ 0.
      komk-prsdt = sy-datlo.
    ENDIF.
    komk-fbuda = sy-datlo.
    CALL FUNCTION 'ME_FILL_KOMP_PO'
         EXPORTING
              i_ekpo  = ekpo
              i_t001w = t001w
              i_ekko  = ekko
              i_komk  = komk
    *              I_MT06E = MT06E
    *              I_EINA  = EINA           "hier nicht gefüllt
         IMPORTING
              e_komp  = komp.
    CALL FUNCTION 'PRICING'
      EXPORTING
        calculation_type = 'B'
        comm_head_i      = komk
        comm_item_i      = komp
      IMPORTING
        comm_head_e      = komk
        comm_item_e      = komp
      TABLES
        tkomv            = tkomv.
    LOOP AT tkomv INTO komv .
      WRITE : / komv-kschl , komv-kbetr CURRENCY komv-waers , komv-waers .
    ENDLOOP.

  • Condition Record for picking Output List

    Dear All
    Kindly let me know where do we maintain condition record for Picking Output list.
    Where do we define a new Output Type for Picking List
    Regards
    Srihari

    Hi Srihari,
    I think i have got the question rightly interpreted.
    All you want is to maintain condition records for picking ouptut ... correct ?
    You can do it through transaction<b> VP01SHP</b> ....(dont try to find it in easy access..atleast I could not locate it)
    Under TCD VP01SHP > V4 you will be able to maintain condition records for all condition types that have been configured for picking.
    Hope this helps you .... <b>if yes then pls reward liberally !!</b>
    KInd Regards
    Sachin Bhonsle

Maybe you are looking for