Condition records for Plant/SLocation - output determination
Is there any BAPI for uploading the condition records in OMJ3?
This is for entering condition records in inventory management based on plant/SLoc parameters.
pls advice
Thanks.
I am not aware of any BAPI, but you can try using a BDC Program or LSMW to upload these.
RJ
Similar Messages
-
No condition maintained for Order Confirmation output type but still active
Hi,
I have NOT maintained any Condition record for Order confirmation Output(BAFX) but still it is generated and Fax instruction is being sent to the Sold to Party. Also i found that NO condition record for Order confirmation output(BA00) is also maintained but still Order confirmation is still being triggered.
Actually i want that NO Fax instruction is to be sent for Order confirmation for some of the customers.
Kindly advise.
Thanks,Hi vk@sap,
Check in the output analysis how the output was determined, so that you can know why they're still determined.
Thanks,
Mariano. -
Maintain output condition record for KONS
Dear all friends,
Anybody help me to maintain output condition record for KONS during consignment cycle.
when,where and how i can maintain the output condition record for KONS
thanx in advance.
best regards,
Rajeshuse MRM1 t-code for KNOS.
-
Condition records for RFQ outputs
Hi
I have seperate output types for RFQ (ZPRS) and PO (ZROP).
I have created document types for PO and RFQ but both are having same code.
Z007 - Hiring Services PO (Category -F)..
Z007 - Materials Req RFQ (Categ -A)
Now when i am maintaining condition records for output types of RFQ in T-Code MN01,
i select ZPRS as output type and trying to maintain the document type of RFQ (Z007), but
the system takes Doc type Z007 of PO.
Kindly let me know what is the issue. Because all the output type and document type has been maintained correctly for respective document category.
Regards
Madhesh KumarHi
At the time of maintaining condition records using MN01 , In the Purchasing document type selection, you can see that the Document types are always listed based on the Document category.
For RFQ the docuemnt category is A so select accordingly for the RFQ.
If you are doing a mass creation ensure that you uses the dcoument category as one of the key combination.
Thanks & Regards
Kishore -
Hi,
Can anyone help me how to find the condition records for output.
We have for the pick, pack and stage different printing options.
How can I check it on the system that they have been configuredgo to NACE and check output type V4 for Picking V6 for Handling Unit and V2 for Shipping. You need to configure Pick Slip, Packing List/Delivery Note and HU labels here. Then you can chose out put on delivery for printing.
-
Condition Record for picking Output List
Dear All
Kindly let me know where do we maintain condition record for Picking Output list.
Where do we define a new Output Type for Picking List
Regards
SrihariHi Srihari,
I think i have got the question rightly interpreted.
All you want is to maintain condition records for picking ouptut ... correct ?
You can do it through transaction<b> VP01SHP</b> ....(dont try to find it in easy access..atleast I could not locate it)
Under TCD VP01SHP > V4 you will be able to maintain condition records for all condition types that have been configured for picking.
Hope this helps you .... <b>if yes then pls reward liberally !!</b>
KInd Regards
Sachin Bhonsle -
How to maintain a condition record for a output type ?
Hi All
How to maintain a condition record for a output type ?Hi,
Goto NACE and there is a button for maintiaining the Condition Reocrds. -
Maintain output condition record for material documents
Please help me with transaction code to " maintain output condition records" for material documents
Hi,
Is it MN21 transaction you are looking for?
Cheers,
HT -
FM or BAPI for creating/deleting condition records for an output type
Hi all,
what is the FM or BAPI for creating and deleting the condition records for a Z(custom) output type.You can use trasaction SXDA_TOOLS.....
object type BUS3003
program type BINP
program/method RM06IBI0
but the fields must be sequentially written in the txt, with every space inclusive.... -
Condition Records for Output types
Hello Gurus,
Do we need to maintain the condition records for the output types configured as Archive only Storage mode??
Will this option archive only in Output type completely archive the document???
Points will be rewarded generously for the apt answers
Thanks and Regards,
Pavan P.hi pavan,
Still u have to maintain the condition record for the archive mode also. Becoz what are the document type u want to archive is defined in the o/p records.
suppose u want to archive billing documents types F2,F1etc...
then goto--> vv31-> enter RD00->enter the billing documnt type-. now click teh communication button on the top -
> here u will find the storage mode. Means the docuemnts which are created with F2 are archived.
regards,
Arunprasad
Message was edited by:
arun prasad -
How to create an output condition record for output type
For SD LE shipping...
Create an output condition record for output type
Thanks!
Message was edited by:
Hoo Laa
Message was edited by:
Hoo LaaHi Hoo,
Follow the path.
SAP Easy Access -> Logistics -> Logistics Execution -> Master Data -> Output -> Shipping - > Create.
Tcode: VV21.
Hope I have clarified your query. Do reward if so.
Regards
Nadarajah Pratheb -
The condition record for use B can not be displayed
Hi gururs,
What does this message (number : VE896 ) mean ?
How to make it desapear ?
P.S : it's about output type for purchase orders.
This message is displayed when I click on : "Goto -> Determi analysis" in tcode ME22N.
Regards,
Bahia.Hi
It means you are trying to veiw the executed condition record. System found the condition record for entered transactional data which you cannot see by clicking on it (when you see green record in condition analysis).
For given condition type -> and access sequence/ access - system shows the condition record that is determined. You can see its details by clicking the access which shows the message that condition record has been found with its determined parameters.
Ex: For batch determination I have set up one search strategy with a condition type (with access sequence). I created one condition record. When creating say sales order -batch determination takes place based on condition record parameters. System shows a green light for determined condition record. You cannot see its details - if you try to see then system issues a message like ''The condition record for use B can not be displayed''. If you want to see click on its immediate predecessor (access ).
Thanks -
Condition record for tax calculation
hi .
how to populate value for condition type MWAS (outputax)
where to create?hi,
Tax is determined based on,
1) Departure Country , departure Zone is taken from delivering plant
2) Destination Country of the customer receiving the goods( i.e Ship to party)
3) Tax indicators in CMR >Sale area data>billing tab page& MMR>Sales:sale org data1 view.
Maintain all the above in the condition records for determining the tax condition rate in pricing procedure.
Reward if it is useful.
MCM -
How to maintain 2 condition record for the same message type
Hi,
My requirement is that I have got a PO output type NEU.Now when i release the PO 2 mesages should get outputed.
1) A print should go to the Printer ie:Option1 Print output
2) A PDF should go to the vendor ie:Option 5 External send
I have completed the config part but I am having a problem while maintaing the condition record for simultaneous output of message 1 & 5.
In MN04 i tried to maintain 1 & 5 but it doesn't allow me to do so?Why
How do I output 2 messages while releasing the PO
KNPlease check this answered link:
Re: Two PO Outputs.
Re: Emailing PO to Vendor, copy to buyer as well
Edited by: Afshad Irani on Jun 16, 2010 12:05 PM -
Steps to maintain condition records for MB1B
Hi all,
i need complete steps to maintain condition records for
T Code MB1B for stock transfer between storage locations for same plant with movement type 311
Your help will be appreciated
SiddharthHi Siddharth,
TP b/w st.locs of same plant there wont be any accounting documents generated..so ..no condition records required.....as such,,material will be in plant only...means same valuation area..
Check the basic rules.....
BR,
Krishna
Maybe you are looking for
-
Control of text blocks in parameter form
How does one control the placement of text blocks in a parameter form? I'm creating paper view reports to be run via a report service on the application server. The report's parameter form, when run through a web browser, looks nothing like its prese
-
CSV file template for Uploading PO confirmaiton
Dear all, We have activated Badi for Upload PO confirmations for a supplier in SNC 7.0. Request if any of you can please let me know where can I find the CSV upload file template. Thanks, mahesh.
-
Descriptor exception for "missing mapping for field"
I am using TopLink 9.0.3, oracle database 9, JVM 1.4. I got one DescirptorException that states that the descriptor misses mapping for one database field. However I have such field mapped through workbench. The is the exception. -----------------exce
-
Open Authorization Objects in role after role Transport
Hi All, I have transported a R/3 (ECC6, support) role from Dev to QA and Dev (Multiple clients). After transport, Role has authorization tab with status (green) but when i display authorization data i found one new open authorization object (yellow).
-
Missing masters in exported library
I have a managed library in Aperture 3. I am trying to export a project as a new library so I can transfer it to another mac. After I have exported the project as a new library, if I open the new library, many photos have the badge saying "Missing ma