Condition records found but do not show up in the pricing - 208

Hi,
A) In some scenario though the CR is found, access is complete, message is 208, there is not exclusion etc, simple scales..yet the value of CR is not shown / included in the pricing procedure calculation.
B) Also in another situation, always the first scale value being read though the scale value being the next higher one, i.e. it should pick up the next condition record based on the order value but it remains at the first scale, which means the scale somehow always being read is the first one irrespective of the order value.
What could be possible reason for these, debug process?
Thanks much for the help!!

Check the following setting is the Price condition Type, I am assuming u are using simple scales.
in T.Code: V/06 go to the price condition type and double click it.
Check the entries:
Scale Basis: C
Check Value: A
Scale Type: Blank (This value can e maintained in the condition record for price condition type).
If further queries do post them.
Regards
AK
Please Award points if helpful

Similar Messages

Condition record exist, but has not been set

I am creating proforma invoice for STO replenishment delivery. I am getting error log "Billing type contains split criteria, n invoiced:123456789, invoice not required". But I am able to save it. I used all standard settings for copy control and billing type.
For the proforma invoice the condition records are picking up some times and some times not picking up. In the analysis its showing "Condition record exist, but has not been set". When I update with carry out new pricing some times its updating with condition records some times not. I need a solution urgently. Please help.
Edited by: k c on Nov 4, 2009 7:50 AM

Hello,
The message "condition record exists, but has not been set" tells you
that the condition record exists, but has not been set in the document.
If pricing was carried out again for the document item, then the
condition would be set.
This can have different causes:
The condition was deleted manually in the item condition screen.
The condition record was created later. Please note that order
processing and pricing have buffer mechanisms. This means that a newly
added condition record might only be found after order processing have
been left completely and then started again.
When an item was added, the condition record was accessed with key
fields other than change time. This could lead to different results in
the requirements check at the time of adding and the change time. This
can occur when modifications are made.
In billing (or when copying orders): Certain condition types were not
determined in the source document (this is usually controlled by the
pricing requirements). When creating the document, the document flow
(TVCPF,TVCPA) is processed using a pricing type that does not
redetermine these condition types, although they are supposed to be
called via the requirments."
Please check if any of those reasons apply to your problem.
Note that the condition type is determined just in the moment when
   the billing item is created. And it then that the userexit fills the
   field. When you save the billing document, pricing is called.
   Please ensure that you have any userexits switched off and then test
   this issue again.
If you have access to OSS notes. please see:
     24832      Pricing rules / TVC
    130416     Requirements in the condition preliminary st
      27636     Message: Condition exists (removed manually)
    859876     Condition is missing: Message VE 108 or VE 008
I hope you find this information very helpful and hopefully it will solve your problem.
Regards,
Martina McElwain
SD - Forum Moderator

Pricing error; ''Condition record exists, but has not been set''

hello friends
we created the order (credit memo req), refer to this created the credit memo.
in the order one line item and only 2 condition records
base price and tax (MWST)
in the order both conditions are coming and in the invoice it is not showing the condition (mwst) and in the Analysis it is showing as ''Condition record exists, but has not been set''
what would be the reason?
regards
siva

Hi,
if both the condition types are showing in the order then you need to update pricing in billing because sometimes when u chnage any condtion value for base price after creation of order then system is not able to find valid condition record at billing document level.
Narasimha

Condition record exists, but has not been set IN JVRD Condition

Dear Expert,
I am facing a problem, when trying to create P.O with Excise and Vat Condition. So i am getting Error like Condition record exists, but has not been set so all duties are Calculated Properly but JVRD condition is not Appearing. when going for analysis so that time i am finding this error.
Thanks You.

hi,
Please check that have you maintained Sett-off Conditions for JVRD Condition Types in T-Code: FV11 with respect to your combinations.
Thanks,
Raviteja

I purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be

i purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be erased. Is that true? My ultimate goad is to be able to read the books on my iPhone as well. Thanks.

You should be able to copy them to your computer's iTunes via File > Transfer Purchases and you can then sync them to the iPhone (or you could re-download them directly on the iPhone)

After downloading album covers (some not found) itunes does not show most of the covers.

After downloading album covers into iTunes iTunes does not show most of the covers. It showas blank white boxes except for those where "cover not found" (music notes).
You have any idea how this happens, perhaps with location of the files.

iTunes refuses to play/read file, it cannot recognizes headers, or recognizes those as corrupt, but giving no error messages. The problem is the stored artwork(s) on your music files. To correct this, select the files that are corrupted/cannot be played on iTunes&iPod, click "Convert ID3 Tags...", then select v1.1 from the dropdown box (first, try this on a few to see that my solution is working).
By doing so, iTunes replaces headers, but your ID3 tags will not be changed (I assume you are using ID3 v2.4), nor you'll lose any info or anything else. This works as a hotfix for those files. If you try to replace headers via another program, your information will be truncated, and any artwork stored will be deleted. So I recommend this one.
You'll see that iTunes cannot play most of the files that has artwork(s) stored in them. New version hasn't fixed this problem, and it has risen with iTunes 8.2.x. If it's going to take long, I suggest you should go back to 8.1.x.
With best regards,
lyravega, goekhan.

Condition record exists, but has not been set

Hi
in the pricing analysis this is the explanation i got.
the reasons could be an Condition record overflow or the condition record wpuld have been created after the documnet is created.
But i found the record has been mainatined earlier to the creation of document.
this was for MWST condition type in IS Oil. where the tax rate manatined for this condition record is zero%
Since this is a mandatory condition, the document could not be completed.
Your help in this regard is highly appreciated.
thanks
C.Sivakumar

Hi,
Check the pricing procedure for the condition type MWST. Whether this condition is taken from any prevoius steps
(check the from and to for the condition type MWST).
If this condition is with reference to somw other condition, then check whether that condition is maintianed or not?
Check the condition record maintenance in VK13, did you maintian the right access?
Prase

Plz help: SO pricing - condition record found but in gray, subtotal is ZERO

Dears,
During creating SO, I found in the Item pricing analysis, the condition record is found and the record is also in valid period. But the strange thing is, the condition value in the item pricing table is in gray instead of blue.
Could you please advise what should I do to find out the reason of this issue?
Many thanks!
Regards
Shiliang

Hi,
I shall get back in the evening. But mean time can you please try another sales order for the same condition, for which condition tables are satisfying the criteria with condition records in place, may be in a test server. It should work.
Sadhu Kishore

I just purchased Apple USB SuperDrive and connected to my Mac mini 2012 but does not show anything on the screen. Not sure if its working.

I just purchased Apple USB SuperDrive and connected to my Mac mini late 2012 USB slot but nothing shows up on the screen.
I have OS X versus 10.10.3

The system bus and all connected products should appear in the system profile or in the
hardware part of About this Mac (more info) and if that does not, restart the computer with
the external Apple USB SuperDrive plugged in. •As a last resort, if nothing else, before a
return trip to be rid of the SuperDrive, you could try a system management controller reset.
The SMC reset is not a first choice, so I won't post a link to the support instruction page.
A new Apple USB SuperDrive should be seen as hardware in system information report.
Of course, an icon of disc media should appear once the disc is inserted into the drive, too.
Good luck & happy computing!

Music is on my iPod touch 1G but does not show up in the Music App

Been having this problem the last week. I synced my iPod before I went to bed, grabbed it and headed off to work on Tuesday. Once I got to work I went to use my iPod and when I opened the Music App a screen popped up saying "Updating Library...This may take a few minutes". I didn't think much about that as I have seen it a number of times after I synced quite a bit of new music or podcasts(the night before I had 3 new hour long podcasts that synced).
Set my iPod to the side as that usually does take a minute, turned back and the screen said "No Content" and then some line about buying music in iTunes. I was quite surprised as I had never seen this screen before. I turned my iPod off and back on and the same No Content message.
I checked my Photos App and those were still there and so were all my saved photos that don't sync. Checked some of my other apps and the settings and saved data was all there too.
Finally got the idea to check the About option in the Settings. Knowing that it would list how many songs and how much space was free. Opened that up and it said 0 songs but that I only had 1.4GBs of free space. Which tells me that my music is on the iPod but just isn't being recognized.
Got home that night and synced it and once done I checked it and my music was there. Friday this all happened again and I have not been able to get my music to show up again even though my iPod tells that I have 12GBs of something on there going by what the About page tells me.
The only change I have made is I finally updated from just Itunes 10.0.X to 10.1.4 on 12/20 of last year. I have a iPod touch 1G that is running 3.1.3.
Last night I did a restore and created a whole new iPod but the same issue has happened. I watched it sync my ~2800 songs but when I went to check them, No Content but the About page tells me there is 12GBs of space being used. Right now I am going to a back from from June of last year to see if that works but I doubt it. I also have an old install of iTunes 10.0.1 that I think I might try.
What else could be the problem?

Which version of iTunes are you using?
Stedman

After IOS 6 update I have lost my purchased ringtones. They show up in iTunes but do not show up on the phone

I have tried all the suggestions and nothing works. I can see the ringtones in iTunes but I cannot delete them as suggested. I have had to buy these ringtones twice I am not buying them (or any other for that matter) again.

I'm with you. I will NEVER spend another cent buying ringtones. It is such a RIP-OFF!!! It also lessens the experience of having an iphone. I have also lost my entire Music Library after a sync. I had over 800 songs. I read online that it is somewhere out in the hemisphere, but I don't know how to get it back. Now, my new Music Library only has about 77 songs, which I also lost after the ios 6 update. However, I did figure out today how to get those few songs back. I'm becoming less and less happy about being #TeamIphone:(
I want a refund for the ringtones/songs I purchased that I can no longer use or have access to.

I am trying to download an app for my ipod touch, but its not showing up in the app store. Its the icess app for controlling a bluetooth helicopter

I recently got my daughter an iCess RC helicopter. It works via bluetooth and can be used with Apple and Android devices. She has a ipod touch, but when trying to do a search for "iCess" in the app store, nothing comes up. It shows up on my PC in the itunes store, but how do I get it on the ipod touch or its apps store?
Also having the same problem when trying to locate the app with my iPad and its app store. I got it installed on one of my android devices via the Google Play store so I know its there & works. Any ideas or suggestion on what is going on here with the iPod and iPad app stores?

The RC helicopter's directions say its available in the App store for Apple and here it is in the iTunes store:
https://itunes.apple.com/us/app/icess/id558793179?mt=8 (released on 6/19/2013)
How do I get this to show up on my iPad and/or iPod touch app stores so I can then download and install it as needed?

My guest account is enabled, but does not show up in the login window. I'd like it to, thanks!

I've tried disabling then enabling it, but it does not appear.

Have you tried a safeboot? It can fix allot of account issues. Like accounts vanishing from the login list.
if that doesn't work, You change the login window to Name & Password, then you can try logging in with the account name "guest". dos it let you login?
if that doesn't work, can you post the output of "dscl . read /users/Guest" ? (skip JPEGPhoto)

I bought a TV series on Apple TV, but its not showing up via the cloud on my other devices. What gives?

The movies and shows I bought on my Iphone show up on my Apple TV, via Cloud, which is cool. But I'd like the media I've purchased on the Apple TV to show up on my PC and I-Phone. Am I missing something? Shouldn't that work?
Thanks!

TS1363 My old Ipod shows up in My Computer but does not show up on the iTunes page, so I don't know how to download music to the iPod.

Ever since I did a recent update of itunes I don't see any infornation of the iPod on the itunes page. So I can't download any of the music I have on the computer onto the ipod.

Hello Alyssa420,
It sounds like you are trying to download your pre ordered album but are unable to download it. I would reach out to our iTunes store support by reporting a problem with the purchase with this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thank you for using Apple Support Communities.
Take care,
Sterling

Condition records found but do not show up in the pricing - 208

Similar Messages

Maybe you are looking for