Condition records- setting printer for multiple vendors at the same time

Hi all,
I have maintained condition record for POs for Key combination of Doc type,Purch Org and vendors.Now for a particular doc type and P.Org , I have around 50 vendors. I need to change the printer for all these 50 vendors to 'printerx'.Is it possible? I tried selecting multiple vendors at a time and changed the printer but its not working.

Hi Saurav ,
You can achieve this through SCAT transaction.
For running SCAT take the help of ABAP team.
I hope u might be having the list in the form of text file.
If not , download the same from NACH table.
Regards
Ramesh Ch

Similar Messages

  • Can I run the currency translation for multiple years at the same time?

    Dear Friends,
    I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
    say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
    Can I run the currency translation for multiple years at the same time ?
    Note: The year is determined from the YEAR property of the "Time" dimension
    appreciate any inputs,
    thanks

    You can run currency translation for multiple years.
    I think the problem it is actually related to how you are sending the parameter to currency translation script.
    Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
    My expectation is that actually the script is called just with first year and that's the problem.
    Log of script logic you can find it into:
    C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
    Regards
    Sorin Radulescu

  • How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

    As the title suggests...
    I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer.  (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding  only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time. 
    How do I do that on an AEBS?
    In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines? 
    TL,DR version:  How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.  

    You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

  • Import PST files for multiple users at the same time?

    While importing PST files into archive mailboxes, the Exchange 2010 mailbox server went to 100% CPU and memory usage and I could not stop the imports because the EMS stopped responding.  We had to restart the whole server to get back to normal.
    Not sure if importing PSTs was the cause of it it was a coincidence.  We have done imports the same way before without this issue.
    How many PST imports can be done at the same time and how do we queue up multiple users and have the mailbox imports have unique names for each user?  I noticed they are always called MailboxImport and MailboxImport1 and then it starts over as MailboxImport
    again for additional users. So, if more than one user's PSTs are being imported at the same time, we will have multiple identically named imports running.
    We would like multiple users' PST imports to queue up and start automatically when the previous users' imports complete.

    Please try like this. Rename folder name same as alias.  i.e. \\server\share\<alias>. below are examples.
    "\\server\share\jsmith"
    "\\server\share\tjones"
    "\\server\share\rsmith"
    "\\server\share\bspears"
    "\\server\share\mmouse"
    And run below command to take PST from the corresponding
    foreach ($i in (Get-Mailbox)) { New-MailboxImportRequest -Mailbox $i -FilePath "\\Server\share\$($i.Alias)\$($i.Alias).pst" -baditemlimit 50 -acceptlargedataloss ;while ((Get-MailboxImportRequest -mailbox $i | ? {$_.Status -eq "Queued" -or $_.Status -eq "InProgress"})) { sleep 180 } }
    If a folder missing with the alias you will see an error similar to this.I think this will work for you. You just keep only the required PST folders to import in the "\\Server\share" folder. 
    "Unable to open PST file '\\server\share\mmouse\mmouse.pst'.
    Error details: Could
     not find a part of the path '\\server\share\mmouse\mmouse.pst'.
        + CategoryInfo          : NotSpecified: (0:Int32) [New-MailboxImportRequest], RemotePermanentException
        + FullyQualifiedErrorId : 27802833,Microsoft.Exchange.Management.RecipientTasks.NewMailboxImportRequest"
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Updating info for multiple songs at the same time?

    Is there a way to highlight multiple songs and change info for the songs at the same time without having to do it for each individual song? Example: changing the album or the genre for a batch of songs?
    Thanks.

    Michael,
    You can shift-click to make a continuous selection or command-shift to make a discontinuous selection.
    Then choose Get Info from the file menu.
    Matt

  • Outlook autocomplete cache stops working for multiple users at the same time

    Hi there
    Ever since we upgraded our Exchange 2010 to Exchange 2013 we have had problems with the autocomplete cache in Outlook 2010.
    We have 700 users and about once per week I get a call about the autocomplete cache. A few users are on cached mode, but most use online mode. The problem appears on both, but it can usually be corrected by /cleanautocompletecache.
    Granted, the autocomplete cache gets corrupted sometimes, but it seems to happen a lot for us. I have noticed that often more than one user experiences the problem at the same time, and, since the problem starting after upgrading Exchange, I suspect that
    the issue is with Exchange and not Outlook. Yesterday three users complained about the cache at the same time.
    I know how to get a broken cache going again - that is not the issue. The issue is keeping this from happening so often.
    Anyone out there able to help?
    Thanks!
    /Anders

    Hi ,
    Based on my knowledge , when you tried to send an email to a recipient in the same exchange organisation then the recipient address will be resolved in to legacy dn value and then that email will be delivered to destination mailbox by pointing towards to
    that legacy dn value.
    For the external recipients exchange user the smtp address to get it delivered.
    For your issue :
    Based upon the NDR message , we need to covert those values in to x500 format and add it to respective recipient mailbox as an x500 address.Then These erorrs will happen if the x500 value of the destination recipient is not available on it's maibox
    and that would be the cause of the NDR for most of the times.Some time as you said autocomplete cache would get corrupted on the client end but it is very rare.
    How to convert NDR to x500 address format :
    http://msexchangeguru.com/2012/03/15/x500/
    How to avoid getting such kind of NDR'S :
    https://www.simple-talk.com/sysadmin/exchange/exchange-e-mail-addresses-and-the-outlook-address-cache/
    In case if you don't want the users to use the autocomplete cache when composing the new emails :
    In group policy we can use the  office templates to disable the below mentioned option.
    1.use autocomplete to suggest the names ---> this option will comes under the advanced settings on the outlook client.
    In case if you don't want the users to use the autocomplete cache when composing the new emails as well as if you wanted to delete that autocomplete then you need to choose one more option along with the first one.
    1.Empty autocomplete cache.
    Please reply me if anyhitng is unclear.
    Thanks & Regards S.Nithyanandham

  • AS2 receive for multiple vendors on the same http address?

    Hi all,
    Got a question about AS2 and MDN generation with BizTalk 2009.
    We currently have  a Request Response Receive port set up to point to a local http address, pointing to /EDI/BTSHTTPReceive.dll. We currently have Vendor1 sending us files through this port correctly, and through BizTalk’s
    tracking features I can verify they are getting the MDNs back.
    Now, we set up a second vendor (let’s call it Vendor2) to use the same location and http address. When they send us files, we get them fine, but they don’t get the MDN back any longer. BizTalk’s tracking is showing a 0 bytes response
    being sent back to them.
    I suspect this is happening because the http receive location, on its Certificate tab, has the certificate for Vendor1 specified, and not Vendor2. Is that what the issue is? In other words, do separate vendors, with different
    certificates, have to have a different unique receive location and http address? Or is there a way to just use one address for all vendors to keep it simple?
    Thanks!

    Hi,
    In my opinion, it maybe impossible that multiple
    sender partners can have same certificate. And please refer the similar discussion which might helpfull:
    http://social.msdn.microsoft.com/Forums/en-US/f598a663-ec8e-4ce9-bb3f-5d4ba50faedf/as2edi-multiple-parties-with-same-certificate-errorparty-signature-certificate-should-be?forum=biztalkediandas2
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

  • Import catalog numbers for multiple BP at the same time

    I have to import different groups of the same catalog numbers for multiple business partners. I have been looking through the DTW templates and have not found it yet. Does this functionality exist and if so where would I find it? If not what to do, enter each one by one
    thx,
    Richard.

    Hi,
    I just looked at the available templates... I would use the oAlternateCatNum one.
    Regards,
    Eric

  • Is it possible to specify width in pixels for multiple objects at the same time in Illustrator CS5?

    Illustrator has the 'Transform Each' dialog, but it only allows you to scale multiple objects by specifying a percentage. Is there any way to specify the size in pixels?
    More specifically, imagine I have 10 rectangles on my canvas, and I want them all to be of a specific height. The rectangle position on the canvas matters, so I can't do the 'vertical align to top and then resize group height' trick - they need to be resized in place.

    @Mike: Thank you very much for the quick reply.
    Your suggestion does help, but there is still a gap. To be more specific, my rectangles are actually a bar chart, so the heigh of the ractangles is different and should remain unchanged. What I want to do is make each bar narrower to a specific pixel width. The Shape Options feature allows you to specify absolute dimensions, but it seems like you have to specify this for both the Width and Height - can't just do one unless I'm missing something. You can specify relative increase/decrease in pixels (which mostly solves my problem), but I have to calculate the pixel difference, usually fine unless I'm dealing with decimal pixels which I'd like to clean up and turn to clean pixels.
    A bit confused about your last point. What does 'select individually' mean? Is Ctrl Enter do anything different from just Enter?

  • Starting up Enterprise Manager for multiple DBs are the same time

    I have a machine with 3 Databases configured, named A, B, and C when I execute "emctl start dbconsole" it only starts for database A which is on port 5500, how do I get emctl to start a listener for all 3 databases that are configured and running?, looking at the emoms.properties, A is on port 5500 and works, B is on port 5501 and C is on port 5502. I do no t care about A as it is an old DB, but B and C are currently in use, however while I can connect to them, I can not get the enterprise manager to start for them. This is all very poorly documented.
    Thanks,
    ERIC

    Trouble Shooting
    Go to DB2HOME/network/admin/tnsname.ora
    Check sid
    suppose sid set abc
    Go to DB2HOME/bin
    set ORACLE_HOME=<DB2HOME>
    set ORACLE_SID=abc
    emctl start listener if it throw error (then check any
    anti virus software is running on your box if running then stop , issue again lsnrctl start )
    emctl start dbconsole
    Follow same steps for DB3
    Let us know if it work for you

  • How do you format cell size in numbers for multiple cells at the same time?

    How do you format the cell size of multiple cells at once in numbers?

    select the cells you want to format by clicking at the top-left most cell, then shift click the bottom-right most cell.
    Then open the inspector by selecting the menu item "View > Show Inspector", then click the table inspector segment:
    now use the row height and column width fields to adjust as needed.
    You can also select multiple rows and columns by clicking in an active tables row/column header, then dragging to select rows (or column), then hover the cursor on the line the separates rows (or columns) until the cursor changes to a bar with arrows, then click, hold, and drag as needed.

  • How to program for multiple tasks at the same time.

    I want to start a data acq, then detect a level change in a switch which also corresponds to a visible timer starting. The timer will stop when one of three switches is closed. In the middle of this I would like for there to be a selectable (controllable/ adjustable) time delay andthen a signal is sent to one of three random lights. Can anyone please assist?

    Ok, I took a shot at what I think you are trying to do. The attached VI monitors an analog signal. When the analog signal goes above 5V (could be easily modified for any level), the program pauses for a selectable amount of time, then writes to one of three randomly selected digital lines (the LEDs on my digital lines were reverse logic, so you might have to adjust the polarity). This will at least give you something to work with. Hope this helps!
    -Alan A.
    Attachments:
    analog_in_one_dig_out.vi ‏111 KB

  • How to use multiple languages at the same time for spell checking?

    I use two different languages all the time and words are mostly so different (English and Finnish) that I could have spell checking on for both languages at the same time.
    Now it seem to allow to select only one language at the time and I have to switch back and fort zillion of times per day.

    Thanks for the quick answer.
    The Dictionary Switcher doesn't seem to work with Finnish language, it doesn't detect it at all to be one of the choices although in the Firefox context menu Languages -> Finnish/Finland is shown.
    Also, if it would work, I would need to get rid of multiple EN_* langauges. I just need EN_UK or EN_US, not all 22 different EN_*.
    One option would be to create a custom dictionary, which would have words from both languages. The next task is then to find out how to make this kind of custom ENFI-dictionary, which would have words from both English and Finnish languages.
    Finnish may be a some kind of special case for spell checking anyway, because the support is in its separate plugin:
    http://voikko.sourceforge.net/

  • Is it possible to search for multiple folders with the same name and...

    Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.

    user11919409 wrote:
    Is it possible to create a Clone database with the same name of source db using RMAN ...
    yes
    >
    DB version is 11.2.0.2
    Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
    Handle:     user11919409
    Status Level:     Newbie (10)
    Registered:     Dec 7, 2009
    Total Posts:     102
    Total Questions:     28 (22 unresolved)
    why do you waste time here when you rarely get any answers to your questions?

  • Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

    Hi,
    I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
    I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
    http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
    e=External
    I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
    Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
    Best Regards,
    Morten Pedersen
    CIM Industrial Systems A/S
    Denmark

    Hi David Mc,
    Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
    But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
    I don't think I am the only one in the TestStand world that ne
    ed this feature.
    Best regards,
    Morten Pedersen
    CIM Industrial Systems A/S
    Denmark

Maybe you are looking for