Condition Table download to CRM from ECC

Hi
I have to download condition tables created by customer(say A872, A888) into CRM system.
When I see the adapter objects R3AC5, there is no adapter object present for the same.
Please tell me what are the sequence of steps required for the same. Like mapping tables to adapter object..doing any other config or development for download.
Thanx in advance.
Cheers
Hits

Hi Hits,
The condition table A500 onwards are the customer specific tables which SAP provides. So you need to create your own adaptor objects for these tables. The steps are really simple.
Copy the adaptor object DNL_COND_A002 and give the name ZDNL_COND_A872 follow the same step to create object ZDNL_COND_A888.
Reffer to the oss note 514952 which might also required.
<b>
Reward points if it helps!!</b>
Best regards,
Vikash.

Similar Messages

  • Equipment Download to CRM from ECC

    Hi All,
    We are trying to download the equipments from ECC to CRM, they are downloading to CRM individually.We want to get them in the hierarchy structure as they are in ECC. Like  relevant IObjects grouped to-gether.
    Whats the solution for this, please help out on this.
    Thanks,
    Praveen

    Hi,
    Below link you can find the details for replicating the Equipment from ECC to CRM.
    SPRO> CRM>Master Data--> Installed base --> Replication of equipment from ECC --> Prerequisites and General Information for Equipment Replication
    For equipment config download below are the activities.
    Initial Download Procedure
    1. Activate the adapter object EQUI_CONFIG in mySAP CRM.
    Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Object Management > Business Objects and select the active/inactive box for EQUI_CONFIG.
    Examine the filter settings for EQUI_CONFIG. For a each source site, set the filters to the same settings as for the object EQUIPMENT.
    Don't forget to regenerate the filters!
    2. Start the initial download process for EQUI_CONFIG.
    Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Initial Load > Start.
    Delta Download Procedure
    1. Activate the object class EQUI_CONFIG.
    Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Delta Load from R/3 Back-End.
    You may wish to activate the EQUI_CONFIG delta download if you are downloading changes for EQUIPMENT.
    If you want R/3 to apply filters during the delta download, use transaction SM30 and maintain view CRMPAROLTP as below:
    Parameter name = CRM_FILTERING_ACTIVE
    Parameter Name 2 = EQUI_CONFIG.
    Parameter Name 3 = EQUI_CONFIG
    User = CRM
    Parameter Value = X
    Hope this helps.
    Regards,
    Chandrakant

  • Condition table download in CRM

    Hi
    In the back end ECC 6.0 system, some condition tables have been defined using fields Sales Document Type  (AUART), Sales document item category(PSTYV).
    Now when I try to download object DNL_CUST_CNDALL, tables containing these fields are not generated.
    I have tried to use note 514952, in structure CND_MAPT_ACS_REM_CUST I have added these fields. In View I have tried to map fields to their corresponding CRM fileds, like PROCESS_TYPE for     AUART. Now when I download DNL_CUST_CNDALL again corresponding tables are not generated.
    Please help me in resolving this.
    Thanx in advance.
    Cheers
    Hits

    Hi Hitesh,
                   I think, you have not followed all the steps correctly. Do again following
    1) SAP Comunication Structure CND_MAPT_ACS_REM must contain all R/3 mapping fields. The customer communication structure CND_MAPT_ACS_REM_CUST is already included into it. You just need to define yuour field into CND_MAPT_ACS_REM_CUST and activate this structure.
    2) Now using view V_CND_MAP_CNVFLD you must create a mapping between CRM and R/3 fields.
    Now goto to tx se16 and open tables CND_MAPC_CNV_FLM and CND_MAPM_CNV_FLM and check if your mapping has come there. If yes, then you are going right.
    3) Now trigger customzing downlaod using master object DNL_CUST_CNDALL. ( You dont need to run report /sapcnd/rv12n001 explicitly as this report is automatically called after the download. Its only true from CRM4.o onwards releas )
    4) Check table /sapcnd/t681 and see if the table is active ( check the column GESTA and its value must be 5 )
    5) If its not active then goto /sapcnd/t681e and look for all fields of your table. If something ahs gone worng then this table will give you a clue. Check if there is any double entry for fields for your table or offset value has come properly.
    6) Same time also check the log via tx SLG1
    Do all these steps and let me know if you still face any issue.
    <b>Reward enough points if it Helps</b>
    Regards,
    Piyush

  • How to update Factory calender in CRM from ECC?

    Hi All,
    Factory calenders are downloaded to CRM from ECC, using adapter object DNL_CUST_CAL_C in Initial load (R3AS).  My doubt is, whenever a new holiday is added to Factory calender in ECC, how the particular added holiday will be downloaded to update the same in CRM system?
    Please help me.
    Regards,
    Maddy

    Hello Maddy,
    In my system download object DNL_CUST_CAL_C is for the download from the CRM (online) database to the old consolidated database (CDB, for the offline Mobile Sales scenario). You could see this in transaction R3AC3.
    For your scenario I don't know how to download. This thread here speaks of a manual adjustment in transaction SCAL.
    http://scn.sap.com/thread/274825
    Best regards,
    Thomas Wagner

  • Can we download employee data from ECC to CRM using standard middleware?

    HI,
    Can we download employee data from ECC to CRM using standard middleware? If yes pl give me the procedure.(not using HR ALE/IDOC)
    Thanks,
    Regards,
    PV

    Standard replication for employee to CRM is using ALE.
    BDoc send information for CRM for other business partner. If you want to use BDOC message for send employee to CRM, you should build your own BDOC message that read HCC Table and send this information to CRM.
    However send this information using ALE is not difficult. Why don't you wan to use ALE?
    Regards,
    Lyda

  • How does delivery info flow back to CRM from ECC ?

    Hi Experts,
    How does the delivery info (Quantity Delivered present in the table CRMD_CUMULATED_I) get replicated from ECC to CRM ?
    Is it through the middleware ? If not, how ?
    Any pointers would be of great help.
    Regards,
    Kris.

    hie kris,
    did u have any answer?
    regards,
    marry.

  • Postcode can't replicate to CRM from ECC

    hi,guys,
       I found the postcode field and city field could not replicate to CRM from ECC,but other fields can replicate conrrectly.why?Our CRM system is 7.0 EHP1.

    Hi Raymond,
    Are you able to solve your problem. As I am facing the same issue. But I am trying to replicate from ECC TO CRM.
    When I am changing Address like City in R3 and checking BDOC in crm its green and showing change city. But when I am checkign Business partner master date change city is not reflecting.
    Regards
    Nishith

  • Condition records  not generated in CRM from ECC

    Hi all,
    I have downloaded objects DNL_CUST_CNDALL, DNL_CUST_CND , DNL_CUST_PRC, from ECC to CRM successfully.
    I got all the condition types, access sequence and tables.including CUSXXX tables.
    I have also got few condition records for condition types SAPXXX . I am not able to get the condition records for the CUSXXX tables.
    Suggest me how to proceed further.
    Regards
    Yaswanth.K

    Yes I have checked the SLG1. There were one error..
    "No Entries Determined for the A Tables (Block         1)"
    I am not able to judge how to proceed with that error.
    The detailed Text is diapleyed under..
    Diagnosis
    No entries have been transferred from R/3 to CRM for one of the following reasons:
    1. The R/3 condition table does not contain any entries.
    2. The maintenance authorization has been transferred to CRM. This means that data in the R/3 condition table can no longer be downloaded from R/3.
    System Response
    Error message CND_MAP 312
    Procedure
    If this maintenance authorization has been transferred to CRM in error, this can be transferred back in exceptional circumstances so that a data download from R/3 is possible.
    Regards
    Yaswanth.K

  • Unable to Download Condition Tables and Access Sequences from R/3

    Hi Experts,
    We have a new set of condition tables and access sequences created in R/3. Now we need to download them to CRM, which we are unable to perform. We tried downloading DNL_CUST_CNDALL, but there is no use. The new condition tables are not getting pupulated. Moreover when I download this object, the corresponding CNCCRMPRCUS* table for the new condition type is not getting generated in CRM.
    The strange thing is the above mentioned tables when created in "development and quality" boxes are getting into respective CRM systems. We are using CRM 4.0.
    Your help will be appreciated.
    Regards,
    Ajay

    Hi Ajay
    Please check the transaction SLG1 which gives you very good inputs on the errors which would have happened during customizing or condition download
    Check the customizing download by giving the following parameters
    Object : cond_exchange
    Subobject :customizing
    Give the date on which the recent customizing download of DNL_CUST_CNDALL was performed.Check whether there are any errors!!if there are errors on then those needs to be corrected so that the new condition tables and access sequences get downloaded correctly to CRM.
    Thanks,
    Abishek

  • Download ztable data from ECC to CRM 7.0

    Hi,
    I have created ztable in ECC and CRM 7.0,(tables are same).Now I want to downlaod data from ECC to CRM.
    Table should only be updatable from ECC. No maintenance required in CRM.How to achieve this?
    Please suggest me.
    Thanks,
    Brahmaji

    create customizing adapter objects in R3AC3.
    copy the stanadard FM 'CRM_BUPA_MAP_ADREREG_CI' to custom FM and write source code.
    load object in R3AS.
    create a variant and shedule the based on requirement

  • Bdoc Error: PRODUCT_SRV while download Customizing Objects from ECC to CRM

    Hello,
    we have tried to download Customizing Objects from ERP to CRM we getting Bdoc error PRODUCT_SRV
    Please any help us in replicating customizing objects ECC6.0 to CRM7.0 Ehp1.
    Bdoc Type:PRODUCT_SRV
    Thanks,
    adi

    Adi,
    Where do you get the erorr? If you're downloding PRODUCT_SRV, then this is not a customizing object. Please check for related inbound and outbound queues in CRM and ECC for errors. Please also check SMW01 and see if you have any BDoc's in error. Give us the full error text of any errors found.
    If you get the problem with customzing objects, please let us the object name(s). Is it just one object or all customizing object?
    Best regards,
    Brian.

  • How to activate delta download for BP from ECC to CRM

    Hi,
    i have completed BP initial download from ECC 6.0 to  CRM 5.0.
    i dont know how to activate the Delta download?.
    Plz anyone tell me the procedure.
    regards
    geetha.g

    Hi Geetha
    Synchronization download allows you to synchronize inconsistent datasets on various databases. This can be controlled in time slots or can be triggered manually.
    1. Creating a Request
    Choose Middleware -->Data Exchange --> Synchronization --> Define Requests.
    To define a new data request, choose Display --> Change and New Entries.
    Enter data for the request.
    In object name enter CUSTOMER_MAIN
    2. Starting the Request
    Choose Middleware --> Data Exchange -->Synchronization --> Synchronize Objects.
    A selection screen appears. Enter the objects to be synchronized or use F4 input help to select objects. Choose Execute to start synchronizing the data.
    3. Monitoring Request
    Choose Middleware --> Data exchange --> Synchronization --> Monitor requests
    Enter an object name or a range of object names. Use the input help or of you want to display all the objects, do not enter an object name at all. Choose Execute.
    Further help is available on http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
    Hope this would help.
    Regards,
    Rekha Dadwal
    <b>You gain a point for every point that you reward. So reward helpful answers generously</b>

  • Replicating Custom Fields for Products in CRM  from ECC

    Hi All,
    I am having difficulty in replicating SAP standard field values from ECC to custom fields for products in CRM. This is what i did:
    1. I created a new settype(ZMASTER_INFO) with a single attribute(ZIND_STD) and added
        this new settype to MAT_HAWA. (As all our materials fall under this material type).
    2. I am looking to map SAP standard field from ECC to this custom field of mine.
        I wrote the code in CRM BADI 
        'ZPRODUCT_CUSTOMER2->MAP_R3_TO_CRM_MATERIAL' with the following code:
    DATA: ls_ZMASTER_INFO TYPE ZMASTER_INFO_maintain.
    DATA: ls_category_bdoc       TYPE COMT_PROD_CAT_REL_MAINTAIN,
          ls_category            TYPE COMT_PROD_CAT_REL,
          lt_categories          TYPE COMT_PROD_CAT_REL_TAB,
          ls_settype             TYPE COMT_settype_ext,
          ls_cat_settype_rel     TYPE COMT_CAT_FRAG_REL,
          lt_cat_settype_rel     TYPE COMT_CAT_FRAG_REL_TAB,
          lt_cat_settype_rel_all TYPE COMT_CAT_FRAG_REL_TAB.
    LOOP AT lt_cat_settype_rel_all INTO ls_cat_settype_rel.
          CALL FUNCTION 'COM_SETTYPE_READ_SINGLE'
            EXPORTING
              IV_SETTYPE_GUID         = ls_cat_settype_rel-frgtype_guid
            IMPORTING
              ES_SETTYPE              = ls_settype
           EXCEPTIONS
             NOT_FOUND               = 1
             NO_IMPORT_VALUES        = 2
             NO_TEXT_FOUND           = 3 .
          IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
      CASE ls_settype-frgtype_id.
          WHEN 'ZMASTER_INFO'.
          ls_ZMASTER_INFO-relation-owner = 'X'.
          ls_ZMASTER_INFO-relation-logsys = cs_product_bdoc-header-com_product-logsys.
          ls_ZMASTER_INFO-data-ZZ0010 = is_mara-STD_DESCR.
          ls_ZMASTER_INFO-DATA_X-ZZ0010 = 'X'.
          APPEND ls_ZMASTER_INFO TO cs_product_bdoc-data-ZMASTER_INFO.
          APPEND ls_settype-FRGTYPE_GUID TO cs_product_bdoc-data-MNT_SETTYPE.
       ENDCASE.
    ENDLOOP.
    Since in ECC i am not having any custom fields i did not write any code in ECC for TPS34 and TBE24. I just wrote this BADI in CRM and using the field S_MARA-STD_DESCR.
    I am not sure if i need to write the code in ECC. COUld anyone please confirm if i need the code in ECC?
    Also in the CRM BADI, lt_cat_settype_rel_all is EMPTY. Not sure how this gets its value.
    Could anyone please suggest if i am missing anything here? Any help is appreciated.
    Thanks,
    Karuna.

    Hi Karuna,
    One more solution is to change the BDoc data content before it hit the Database.
    this can be done in badi: Data_Exchange_badi (if u dont find this try with following search string: xchange)
    In the above mention badi you will find a method which is used to populated the contend jst after bdoc in CRM is being populated by R/3 data.
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • Product Hierarchy download into CRM from ECC6

    Hi Guys,
    Recently we have added few Product hierarchies into ECC6 (level 2, 3 , 4 and 5 hierarchies)
    now they are not replicated into CRM...
    how can I replicate them into CRM from ERP6... quick guidance....?
    The object - DNL_CUST_PROD1
    Thanks
    KP

    it will be done maually,
    - On CRM
    For Defining the Product Hierarchy Strucuture :
    CRM IMG -> Cross Application Components -> SAP Product -> Product Category -> Define Category Numbering Schemes
       - make new entry
              Number Scheme     R3PRODHIER
       - after that select the new Scheme, and choose a new entry (should be the same as structure PRODHS on ECC)
    For Defining Product ID
    CRM IMG ->Cross-Application Components->SAP Product->Basic Settings->Define Output Format and Storage Format of Product Ids (tx. COMCPRFORMAT)
    note : should be matched with ERP (Tx. OMSL)
    refrence B09_BB_ConfigGuide
    الحمد لله الذي علمنا

  • Payment terms can not be loaded to crm from ECC

    dear expert,
    i have added three new payment terms in ECC and i need to load them to CRM. I tried  intial load object DNL_CUST_Price, and also tried request load. When i monitored the object/request, there is a green light. however, when i go to IMG in CRM. the new payment terms is  not loaded.
    i  also checked ogject
    Can anyone  tell me the possible reason?  where  can i check and do trouble shooting?
    Thanks!
    BR
    Hedy

    Hi Hedy,
    Please see note 1420329 which should help you to download the payment terms. Check your SMOFPARSFA settings as per the note as it is not supported to mix the two table combinations TVZB/TVZBT and T052/T052U. Also make sure that the request load you have configured uses request detail depending on which table combination above that you use.
    I hope this helps.
    Kind regards,
    Vanessa

Maybe you are looking for