Condition table for Material document printout

When i try to create a condition table with 2 fields Movement type/plant combination
i am getting this warning message
Switch: Field BWART cannot be used (table KOMB)
Message no. VK770
i pressed enter to pass the warning message
When i try to create conditions with the same combination Mvt type/plant for that output type
i am getting this error
*Flow control: Entry SAPMV13B, SEE2, A0, * , 1570, * is missing in T185*
Message no. V0102

Hi
Here i am not seeing any field BWART
in T681F table for application ME
Edited by: Sachein on Jun 24, 2011 2:24 PM

Similar Messages

Maintain output condition table for billing documents

Hi
I need to create new output condition table for billing document with the key combination of "Billing type and Export Indicator". In Field catalog: Messages for billing documents I am able to find field Export Indicator but the same field i am not able to find creation of new condition table (V/63).. Kindly let me know is there any settings required to show the same in V/63.
Thnaks
Srinivas

Hi Ram
The filed already is there in in structure" KOMKBV3" ....
Thanks
RAO

Maintain output condition record for material documents

Please help me with transaction code to " maintain output condition records" for material documents

Hi,
Is it MN21 transaction you are looking for?
Cheers,
HT

SAP table for material document/inventory document number range.

Hi Gurus.
Good day.
Please help. What is the SAP table for number range? Thanks in advance.

Hi Acel,
The table NRIV should fetch you the data you are looking for.
Regards,

Pricing table for Material pricing Group

Hi everyone
I have a problem related to pricing. In ECC, if we create a condition table for material pricing group, assign it to the Access sequence PR00 and then download the customizing data to CRM, the access sequence appears in CRM but without this table.
Could you please provide any clue to this??
Also, I had created another table with the Material/Material Prc Grp, assigned it to another Z-Access sequence and assigned the access seq to a Condition type. Again I had downloaded the customizing and in this case, only the Condition type has arrived. Neither the access sequence nor the table has come.
Could you please guide me as to what needs to be done??
Please help!!
Regards
Debolina

Hello,
Please check your replication object e.g. DNL_CUST_CNDALL and see if you have filters defined there.
You might have put filters which are preventing the download.
Also, you have to define the new field mappings in CRM before you download the tables.
V_CND_MAP_CNVFLD (transaction SM30).: This view contains the mapping between R/3 data structure (maintained in CND_MAPT_ACS_REM_CUST) to CRM data structure (Field Catalog).
The relationship between R/3 field names and CRM field names must be defined in either CND_MAPC_CNV_FLM or CND_MAPM_CNV_FLM
Let me know if still issues.
Koshal

Material document printout issue 541

Iam trying to take printout of the material document which has been posted with 541 movement type.
1. new output type copied from wa01 and created as DEMO
2. created access sequence with condition table 503(only plant is there in that table)
3. assigned access sequence to DEMO
4. maintained condition records also
5. In MB02 i have assigned that DEMO output type to that material document
Even though i am getting the message
No messages for repeat processing exist
Message no. VN109
Pls suggest

Hi,
Check the output conditions has maintained properly in MN21 transaction.
1 Material Document Printout 1 3 EN
If its OK,
Then check in MB90 transaction for
Processing mode 1
reg.
Mariappan
Edited by: rs_mariappan on Feb 20, 2012 12:45 PM

Need an IDOC EDI STEPS for material document(MB03)

HI ALL,
i need an IDOC for material document. For example, user in SAP make material document (t-code MIGO or MB11), then automatical is downloading outbound IDOC, which contain information about material document.HOW TO PROCESS IT THROUGH EDI .GIVE THE STEPS.

like below you can do your settings
The EDI Configuration required to be done for Transfering IDoc to non SAP System is.
1. First of all, we need to identify the Transaction Data which is required to be Transfered to external System.(Ex: Sales Order Data or Shipment Data or Delivery Related Data).
2. Secondly, Identify the IDoc Type & Message Type. IDoc Type can be found in Transaction WE30 & Message Type Can be explored in Transaction WE81.
3. After that, assign the IDoc Type to Message Type in WE82.
4. Identify the Selection Program (Outbound) which is generally a Function Module in the Form of IDOC_OUTPUT_<Message Type>. Example, if the Message Type is ORDERS, the FM will be IDOC_OUTPUT_ORDERS.
5. Assign the Function Module to a Process Code in WE41 (Process Code for Outbound).
6. Configure Port Definitions in WE21 for which the RFC destinations are to be maintained in Transaction SM59.
7. Maintain Partner Profiles for the Outbound Message Processing in WE20.
8. Last, but not the Least, we need to Focus Mainly on Message Control Configuration which is nothing but maintaining the Output Type for the Outbound IDoc to be Triggered for the Sales Order Application or Delivery Application.
i. In Message Control Configuration, we'll maintain
a. Condition Tables
b. Access Sequences
c. Output Types
ii. To Create the above elements, we can go to SPRO Transaction and do the same depending on the Application Area such as Sales / Shipping / Logistics Execution etc.
iii. For Output Types & Access Sequences, we can go to the Transaction NACE or VK01 in which we'll maintain the Output Types / Access Sequences & Condition Records.
Please note that all the above steps may not be needed if we are using some of the Standard Elements provided by SAP such as Message Type, Process Code, IDoc Type & Selection Program as many of the Standard SAP Applications have their own Elements for different Application Areas.
For example, if you want to send an Order Confirmation IDoc when the Sales Order is saved, you can use the Message Type ORDRSP, IDoc Type ORDERS05 & Selection Program as IDOC_OUTPUT_ORDRSP.
However, Message Control Configuration is the Key Factor and is required for all the Applications as per the Customer's / Client's Requirements.

Sales Order Unable to Use New Condition Tables for Tax Condition Type

Dear All,
I am currently working on SAP R/3 4.0. I have a new requirement for my tax where I need to create new condition tables other than the 4 standard SAP tables which are Customer/Material, Division/Customer, Departure Country/Destination Country, Domestic Taxes and Export Taxes. My new tables consists of Departure Country/Destination Country/Shipping Point/Tax Code. The requirement is that the tax code is based on the chosen destination country and shipping point. The problem I am facing now is that no matter what types of table I create or even I generate with reference to the standard table, the access sequence will only refer to the 4 standard SAP tables above. Even if I put my own table in the highest priority for the access sequence, the same thing happens. My sales order will only pick up date from the standard table.
I wonder if anyone encountered the same problem as me.
Kindly advise.
Thank you.
Regards,
Yvonne

Hi
Yvonne
I suggest fist check a simple thing ,whether u have successfully determined shipping point for each line item ,it is possible that just adding a line item will not trigger shipping point determination . So after u update the shipping point on line level u can rerun pricing and check agian if u r getting it .
Secondly for tax purposes I suggest Try to have Customer and material tax classification approach this allows to u have long term flexibiliy and also reduces your maintenance activity . As if u change or add number of shipping points and business changes using the sequence of shipping point ,the logic of just using shipping point will not work.
In Tax classification u cna add new condition table for each new tax category and use it in different access sequences.
This information can be passed on to FI using Different Tax code for Different combination.
I hope this helps
Regards
Mandar

Material document printout

Hi,
I am using out put type WE01 for a material document printout but this is too much descriptive.
Is there any way I can make it less descriptive such that I can only see
material document number,
document date,
PO reference,
Vendor number,
name,material number,
material description,
and quantity.
Is there any formavailable for this.
Please suggest
Regards,
manOO

Hi,
The form display (descriptive, non descriptive) does not have anything to do with output type. It depends on the script or smartform that has been assigned to the output type.
You would get the same output even if you use the different output type provided you use the same script or smartform.
Hence, you would need a script or smartform which is less descriptive.
One way is to copy the standard form and modify (remove unwanted data) as per your requirement.
To view which script or smartform is assigned to the output go to Transaction NACE -> Choose ME Application -> Click on Output Types push button on your application toolbar -> Choose WE01 and click on Processing Routines option on the left pane of your screen -> You will be displayed with form details.
Hope this will help.
Regards,
Naveen.

Reading Additional info for Material Document (Movement Types 313, 201)

Hi SAP Gurus,
I am currently working on a requirement for Material Document Interface.
The Requirement is as below:
(1) The user creates/modifies a material document using MB01/MB03/MIGO for movement types 313 and 201 separately.
(2) The user maintains additional information by creating a NOTE using the option
SERVICES FOR OBJECT --> CREATE NOTE.
(3) To Print the materail document information.
The Approach is followed is:
1) I have to retrieve the Address for From and To Locations respectively along with document data and display it as Simple List output.
Approach:
I retrieved the data from MKPF and MSEG tables respectively.
Also retrieved the data for FROM and TO locations using table TWLAD and function module ADDR_GET.
(2) I also need to retreive additional information created by the user using the option SERVICES FOR OBJECT --> CREATE NOTE.
Approach:
Request your guidance and inputs to solve the point (2) mentioned above.
I have debugged the SAP Standard tcode MB01, MB03 ,MIGO which have the option SERVICES FOR OBJECT --> CREATE NOTE.
I have also used ST05 to trace the transaction to get a proper solution.
But, i was able to observe that only a table SOOD provides the initial required info only which points to a office document type.
Looking forward to your valuable inputs, so that i can retrieve the data entered using the option SERVICES FOR OBJECT --> CREATE NOTE.
Thanks in advance for spending time and
guiding me to deliver the development on time.
With best regards,
Sudhakar

Hi,
Try this..
TABLES: MSEG.
PARAMETERS: P_DATE LIKE MKPF-BUDAT.
SELECT-OPTIONS SO_BWART FOR MSEG-BWART.
SELECT-OPTIONS SO_MATNR FOR MSEG-MATNR.
DATA: BEGIN OF ITAB OCCURS 0,
 MBLNR LIKE MKPF-MBLNR,
 GJAHR LIKE MKPF-MJAHR,
 MATNR LIKE MSEG-MATNR,
 MENGE LIKE MSEG-MENGE,
 MEINS LIKE MSEG-MEINS,
 END OF ITAB.
SELECT AMBLNR AMJAHR BMATNR BMENGE B~MEINS
 INTO TABLE ITAB
 FROM MKPF AS A INNER JOIN MSEG AS B
 ON AMBLNR = BMBLNR AND
 AMJAHR = BMJAHR
 WHERE A~BUDAT = P_DATE
 AND B~BWART IN SO_BWART
 AND B~MATNR IN SO_MATNR
 AND B~MENGU = 'X'.
The field MENGU might be used to check if the
material movement has affected the stock..
Also I have used posting date = given date in P_DATE..
LOOP AT ITAB.
 WRITE: / ITAB-MBLNR,
 ITAB-GJAHR,
 ITAB-MATNR,
 ITAB-MENGE,
 ITAB-MEINS.
ENDLOOP.
Thanks,
Naren

Material Document Printout Problem

Hi friends,
i am facing one problem in the system related to material document printout
Recently we have changed the logo in material document .it is working fine for the material documents created after this change but for the old material documents still the users are getting the Previous Logo in the Printout
i know that we need to reset the Outputype for Material document but i dont know where we will do that
Kindly help in this

Hi,
can you explain the procedure what exactly i need to check in MN21 and MB90
the issue is coming in production server i have access to MB90
kindly suggest what exactly i need to follow

Table for Accounting Document of Invoice Document

Dear All,
We have accounting doc. table of material document as BKPF(HEADER) & BSEG(ITEM).
In the same way, can any one share, whats the accounting doc table for Invoice/MIRO??
Regards
Mahesh
Re

Hi Dear
actually what table you have mentioned in your thread that table is for Accounting document, it doesn't matter whether the accounting document is created during good receipt or Invoice receipt
hence BKPF and BSEG is accounting table for invoice as well
Thanks

Relation between BKPF and EKBE table for reversing document?

Is there any relation between BKPF and EKBE table for reversing document when STBLG is blank in BKPF.
AND
How to differentiate Old Accounting document / Reverse document / New document when in BKPF-STBLG is blank for all three document and BKPF-XBLNR are same for all.

Hi Varun,
Table Document no (BKPF-BELNR) is link between Material document no (EKBE-BELNR). If you are looking for validating Material reversal document then please use following logic for your requirement.
Material Document (MBLNR) & Material Document Year (MJAHR). Pass material document (MBLNR) to MSEG-SMBLN to read MSEG-MBLNR with MSEG-MJAHR to MSEG-SJAHR, if record found delete both the documents i.e. MSEG-SMBLN & MSEG-MBLNR (donu2019t consider these documents in the logic) and display Material Document No. (MSEG-MBLNR)
Regards,
Santosh

How to setup number range for Material Documents created by goods movement

Hi Experts,
Good day!
Would you know what table or transaction code we could setup or configure the number range for Material Documents number created by goods movement?
Thanks. Have a wonderful day!
Rockz

Hi,
Tcode - OMBT
Regards,
Vivek

Own condition tables for tax determination purposes

Hi,
While using TAXINN pricing procedure. For simplified tax rate determination, we want to create our own condition tables for tax determination purposes, as is otherwise possible with the conditions technique.
The existing conditions which are pre-delivered with access sequence/s are as:-
TABLE     Description
3     Tax Classification
363     Plant/Vendor/Material
358     Country/Plant/Ctrl code/Material
357     Country/Plant/Ctrl code
362     Country/NBM-NCM Code
359     Plant/Matl group
However we want to create a custom table (9xx:Vendor/Material) with which can meet our requirement of tax determination while purchasing materials.
Could you please elaborate weather our requirement can be fulfilled by standard customization?
Thanking you.
PP

hi sam,
Thanks for reply. I watched many posts related to this issue and your reply is generic one.
I understand that all kind of requirement can be meet with existing data.
I am writing here because I want to reduce the number of records to be maintained. (say, Plant/Vendor/Material, if I have 10 Plants then no of records will be 10 different Plants x vendor x Mat. codes. Hence I am keen to have as Vendor/Mat. code. SAP delivered Plant/Matl group somehow not fulfilling our business need).
I am interested to know weather it is possible to create a custom condition table to meet our requirement/s?
What is your opinion on this..? Please share if you know any SAP Note as am unable to find any relevant one.
Thanks,
PP

Condition table for Material document printout

Similar Messages

Maybe you are looking for