Condition Table missing

Hi,
  In sales order I am getting a Stop saying: "Condition table missing zz00 01 (output shipping)
Any ideas of how to solve this problem?

Hi Vamsee,
Looks like SD config made some changes to pricing conditions for sales order. If you are getting the error in development system, they would have deleted some pricing table which was there before and it is referred in some user exit. If you are getting the error in QA system/Prod, config changes are completely transported.
Please check condition table exists in the system, If not please inform the SD config contact.
Reward points if it helps,
Regards,
Anil

Similar Messages

  • Taxes condition table - missing.

    Hello Gurus,
    We have one situation where in our client is facing an error while creating a sales order(trading)- the error : condition table missing access JST1(pricing- taxes)missing. what can be the causes and solution?
    Regards,
    Raj

    hi
    check the access seq JST1 from the following route
    SPRO > Financial Accounting >Financial Accounting Global Settings > Tax on Sales/Purchases > Basic Settings > Check Calculation Procedure > Access sequece
    There might b the condition table missing, either enter valid conditon table or remove the ACNO(acess no) from the JST1 access sequene.
    reg
    Deepak

  • Condition table missing : Access Z002 50 ( Pricing Purchasing)

    Hai SAP,
    Need your help to assist me in the problem,
    When i creating Purchase order, the pricing schema does not appear. when i click on the Analysis Button on the condition tab, system tall me that " Condition table missing : Access Z002 50 ( Pricing Purchasing) " .
    why this thing happen ?

    Hi
    Check the schema group vendor for that vendor in vendor master
    using that track the Pricing procedure to which it is assigned
    then check the condition table for that access sequence z002
    Regards
    Amuthan M

  • Re : Condition table missing: Access Y003 10 (Output Inventory Management)

    Hi
            While doing migo using movement type 501 the following error is coming.
    "Condition table missing: Access Y003 10 (Output Inventory Management)"
    How to solve this.
    Thanks
    Anto

    Hi
    After creation of PO, any body chaged the access sequence?
    Check this out in SPRO- SAP IMG- Material Management- Purchasing- Conditions- Define Price determination process - Define access sequence.
    Regards,
    Raman

  • Condition table missing: Access JST1 60 (Pricing Taxes)

    Dear All,
    We had gone for the updation of patches related to 2007-08 budget changes. Our SAP version is 4.7EE.
    We are getting the below message, when giving the tax code in purchase order creation.
    "Condition table missing: Access JST1 60 (Pricing Taxes)"
    TAXINJ is being used.
    Please provide a solution on this issue.
    Regards,
    Venkat.

    check all the condition type and there access sequences

  • Pricing table missing

    hi experts,
    when any purchase order is created in development server the system is giving error message :" condition table missing:Acess JST1 60(pricing taxes)
    Can any one tell me what is the reason behind that? how to solve the error?
    Sudipto

    Hi,
    thanks for your early response.
    the error message no. is VE305
    please help me out.
    Sudipto

  • Field is missing in Create condition table screen

    We are going through one minor issue.We are trying to configure output types for billing docs.I am trying to create a condition table with sold to party field.It is displaying in field catalog,but not displaying in create condition table screen.Any idea how to get it?
    Thanks

    Hi VCS
    As you want to create a condition table at billing level and at  billing level for sold to party it is KUNAG  where as in sales order level it is KUNNR.
    VBRK- KUNAG (SOLD TO PARTY AT BILLING LEVEL )
    VBAK- KUNNR  (SOLD TO PARTY AT SALES ORDER LEVEL )
    so you need to select the sold  to party KUNAG and if that sold to party is not available , create that sold to party feild (KUNAG) . and save it
    Now when you cerate a condtion table check wheather that cerated feild is there are not . sometimes it will be there and sometimes it wont be there . if that feild is not there then , we need to take the help of ABAPer's and they will  copy the standard table into Z table and in that they will write the ALV report  or any program . so that it gets triggered in that feild catlog.
    example :
    KUNAG is availabe in VBRK table
    so ABAP'ers will be copying hte standard VBRK table in ZVBRK table  and in that ZVBRK table they will write the program where this feild KUNAG is also inserted.
    so when you create a condtion table then you can see this KUNAG feild, in the list of feild catlog,if that feild is not there just maintain . the feild. automatically it gets triggered in the feild catlog
    Reward if useful
    Regards
    Srinath

  • Entries missing for Condition tables in TADIR

    Hi,
    I have downloaded certain pricing condition tables from ECC (customizing download). They got generated successfully and were visible as 'Active' in SPRO and ABAP Dictionary (SE11).
    When I ran the customizing download again, all the tables had become 'Inactive' in SPRO>Customer Relationship Management>Basic Functions>Pricing>Define Settings for Pricing--> Create Condition Tables.
    But at the same time, these tables are appearing as 'Active' in SE11 and condition records are also flowing for them from ECC to CRM.
    Having checked the log in Transaction SLG1, there are visibly few errors stating 'Entry not found in TADIR' for some condition tables.
    Any pointers to identify the source/cause of this error or how to resolve the same?
    Thanks & Regards,
    Vartika

    Hi Vartika,
    The note 457711 will be helpful for you.
    Generally these errors on TADIR coversion will not cause any problems on your conditions download..These errors can be ignored.
    Please check for inconsistencies between R/3 ad CRM using the note 664815 and correct them. There are reports attached to it for 4 diferent cases.
    Thanks
    Abishek
    Edited by: Abishek Kumar Thiagarajan on Jun 11, 2009 8:58 AM

  • Creating New condition table.

    Hi all,
    I want to create conndition table with new fields. I have added those Zfields to VBAP, KOMPAZ.
    Do i need to code anything in userexit_pricing _prepare_tkomp for populating the fields in list of allowed fields while creating while creating condition table?
    Thanks & regards,
    NarsiReddy.

    If any field to be considered for condition table, the same would be done via V/03 where you can add any fields that are missing from standard.  But once you save, system will ask for Access Key without which, it won't flow in condition table.  Hence, user exit is not necessary.  But it would be ideal if you explain the business process as to why you were looking for adding some new fields.  Hope, you are not reinventing the wheel.
    G. Lakshmipathi

  • Conditon table missing

    Dear all,
    While doing PO, we are getting the following error:
    Condtion table missing: Access 0003 30(Output purchase order)
    What would be the issue?
    Please suggest.
    Thanks & Regards,
    AR

    Go to
    SPRO - MATERIALS MANAGEMENT - PURCHASING - MESSAGE - OUTPUT CONTROL  -ACCESS SEQUENCE - DEFINE ACCESS SEQ FOR PO.
    Select Access sequence 0003 and Click on Access.
    Go to New Entries and assign condition table 30 to this access sequence.
    Hopefully this will solve your problem
    Sheetal

  • Free Goods Condition table records not getting downloaded from R/3 to CRM

    Hi Friends,
    I'm trying to download free goods condition records from R/3 to CRM. i have already downloaded condition techique, procedure, condition type, access sequece.
    Now i am tryin to download Free goods condition table for Example: KOTN602 to CRM. I created new condition adapter ZDNL_COND_N602 by coping standared adapter DNL_COND_N010 and changed to table table. now i have the following tables in table section.
    KONDN
    KONDNS
    KOTN602
    TMC1K
    No filter has been set as we have only one record in table KOTN602 in R/3.
    i had run initial load of this adapter ZDNL_COND_N602 thr R3AS, then I checked in R3AM, the status is canged to Green. but when I checked in CRM table /1CN/CCFCUS602, no data available in this table ( NO download happens).
    Can you please suggest what could be the reason and what is missing?
    Thanks
    Bharthi

    Hello Bharti,
    Please make sure in txn R3AC5, for you Z* adapter object, under the tab 'Mapping Modules: R/3 to CRM', you just have
    single entry of CND_MAP_MAST_EXCHANGE_MAIN_MBD.
    If there are double entries please delete the duplicate.
    Also, you can check the logs using txn CND_MAP_LOG_DISPLAY
    Object : COND_EXCHANGE
    Sub-Object: CONDITIONS
    Please give the 'From' and 'To' correctly, to get the correct log messages.
    This will give you some hint.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • Field catalog not appearing in the condition table for output determination

    Hello,
    I wanted to include WBSTK as a condition table entry in the output determination for  outbound deliveries, WBSTK is available as field catalog , but not available during condition table creation.
    Can you pls help me out?
    Regards
    Vaidee

    Check OSS Notes
    379619 - Preference process in SD order: Prefrnc ID missing
    595984 - Preference indicator in SD order
    379269 - Preference in SD doc: User exit: Set pref. indicator PREFE
    Regards

  • Condition table for Material document printout

    When i try to create a condition table with 2 fields Movement type/plant combination
    i am getting this warning message
    Switch: Field BWART cannot be used (table KOMB)
    Message no. VK770
    i pressed enter to pass the warning message
    When i try to create conditions with the same combination Mvt type/plant for that output type
    i am getting this error
    *Flow control: Entry SAPMV13B, SEE2, A0, *   , 1570, * is missing in T185*
    Message no. V0102

    Hi
    Here i am not seeing any field BWART
    in T681F table for application ME
    Edited by: Sachein on Jun 24, 2011 2:24 PM

  • Condition table not showing up in VKOA

    Hi All,
    We have upgraded the sytsem from 4.6c to ECC 6.0.And i have observed that in Transaction VKOA, one of the condition table is not showing up. Can anyone guide me on this?

    Hi,
    If any one of the tables is missing, that can be included.
    The menu path: SPRO >> SD >> Basic Function >> Account Assignment/ Costing >> Revenue Account Determination
    1.     Define dependencies of Revenue Account Determination: Here you can check whether the required table is available; if it is not available create it.
    2.     Define access sequences and Account Determination types: Here select u2018Maintain Access sequences for Account determinationu2019.  You will get the access sequences here. Eg: KOFI. Select the access sequence and click on u2018Accessesu2019. You will get the table details. Here you can maintain the required tables; rearrange as per your requriment.
    Regards,
    K Bharathi

  • Urgently need solution for Pricing Error: Mandatory condition type missing

    Hello, All
    I am working on CRM 5.0 service module and I am facing a problem while creating a service order.
    When I enter the product in the service order it gives me an error
    "pricing error: mandatory condition type Z### is missing" even though I maintained the customer pricing procedure, the pricing procedure determination, and the condition record. The error shows that the pricing procedure is determined as the error shows the mandatory condition is determined but what I think is that it can’t find the condition record.  
    I already maintained the condition table and the condition record in the product master data but it does not pick the price, kindly help. Deserving points will be rewarded.
    Regards
    Jacopo François

    Hi,
    Open u r transaction which u r getting the error, Double click on product u ll get the item level info,   Select condition there u click on create icon, there u can define the condition.
                     OR
    While creating a sold to party check whether u  r entered a sales area data properly or not.
    Hope it helps u
    Gentila

Maybe you are looking for

  • How do I get back to the first page of an application when I'm in the middle of it?

    I'm sure there's an easy answer for this, but I can't find it.  If I'm in the middle of an application, say iBook, and I want to get back to the first page of that application, how do I do it?  When I tap on HOME, I go back to the home page with all

  • Attachments in Travel Expense approval not displayed in UWL

    Hi guys, We here have implemented the travel expense workflow WS20000040. According to the current std functionality, when the requestor creates a travel expense request, he is able to attach any attachments along with the request. But when the reque

  • ORA-04091:table XYZ is mutating,trigger/function may not see it ORA-06512

    Hi everybody i am facing mutating problem during data deletion fron XYZ table as ORA-04091:table XYZ is mutating,trigger/function may not see it ORA-06512 at "user.procdure_name",line 39 ORA-065 i have table XYZ and have database trigger on this tabl

  • Handling multiple languages

    I have a website that is currently in Polish language. Now I want to do also introduce and do it in English but the problem I'm facing is that I have a one backend database and I don't want to dupliacte the pages all over. If I just duplicate my page

  • Avi File  - Show's Only Audio

    Dear Forum Members, Recently I've recorded my self playing Assassin's Creed IV, using FRAPS. The file format that FRAPS giving is AVI. When i imported it to Premier Pro CS6 on my computer, it worked fine. On the laptop though, same premier program, i