Condition type decimal point issue in pricing

Hi
I have a import pricing Procedure as shown
The condition types JEDB and JSED were calculated on 0.16 EUR,
Like JEDB 2% of 0.16EUR= 0.0032
and JSED 1% of 0.16EUR= 0.0016
it is taking the first two digits of the value, ie 0.00 only
Please confirm how to come with the corrected values,
Thanks,

Yes it is intended for TM but you can do the manual changes as recommended in the note and for technical coding, you can copy that logic.  Else, have a look at this note:-
Note 38881 - Pricing with different decimal places
G. Lakshmipathi

Similar Messages

  • Tax Condition type : Account keys in SD Pricing procedure .

    Dear SAP Gurus,
    In the configuration of the taxes (Service, Ecess & H & Ecess)
    The tax codes are defiined and the condition type JXX has been defined with the account keys .
    Then the taxes are automatically posted to the accounts .
    But in the SD pricing procedue for the same condition type the account key defined is EXD .
    But where is this account key going to post the value of the condition type JXX ..
    Please explain the use of the account key in the Tax Conditon types in the pricing procedure.
    regards,
    Amlan Sarkar.

    Hi,
    The account keys ERL , ERS, DIFF which are related to revenue and sales deduction in your pricing procedure are defined in transaction VKOA. Here the account key, chart of accounts, your sales organization and G/L accnt combination are maintained.
    Whereas all the tax codes G/L accounts get picked from transaction OB40 , So in your pricing procedure where ever you see tax account keys, make sure you go to OB40, input your tax code and then you will see all the G/L accounts against each respective account key. This is nothing but the calculation of tax on sales / purchases.
    Hope this will solve your query.
    If it does, please dont forget to reward points for contribution.
    Regards
    Ravi

  • How to Know one condition Type (PR00) used in which pricing procedures

    Hi Friends,
    I have 20 pricing procdures I need information that condition type PR00 is used in which pricing procedures.
    by help of
      any report
      any table etc
    Thanking you
    Arun

    Dear Customer,
    in standard there is no report available for your requirement.
    In this case you can only create your own selection report therefore.
    regards
    Claudia

  • Condition Type  not displaying on the pricing procedure

    Hello We are copying a sales order contract with reference to a sales order but we want a condition on the contract pricing procedure to be determined. Now I know I could redetermine pricing by selecting these option but we can't do that as there could be  a year difference so we need the old pricing. B    Carry out new pricing C    Copy manual pricing elements and redetermine the others e.g. Sales Order  Pricing Procedure XXXX                         Conditions ZPR0                          Conditions ZHD1 Create Contract with reference to sales order    Contract  Pricing Procedure yyyyy                         Conditions ZPR0                          Conditions ZHD1                         Conditions ZNEW In the analysis the condition ZNEW has the "Condition without condition record (not relevant)" As I mention in new pricing it appears   

    Hi Roy,
    Trust you are doing good,
    I have gone through the question which you have asked but its not clear what do you want to exactly do.
    Pricing Procedure XXXX                         Conditions ZPR0                          Conditions ZHD1 Create Contract with reference to sales order    Contract  Pricing Procedure yyyyy                         Conditions
    Here you talking about two different pricing procedures..or you talking in terms of pricing values.
    Please highlight.
    Thank you,
    Regards
    SRT

  • How to resolve the decimal point issue??

    hello friends,
    I had declared a variable of variable type P(16) decimals 6 for price. The price is calculated accurately and stored in the variable. The value that got stored is 5094390.000000. I declared one more variable of type ekpo-netpr and moved that value into this field. In the fieldcatalog i used cfieldname = 'waers'.....while displaying through ALV for waers 'IDR' (no decimals should be displayed ) it is displaying as 509.439.000 instead of 5094390.
    Could you tell me any one dd variable that can hold of type P(16) decimals 6 .
    pls help me to resolve this issue. All helpful answers would be highly rewarded.
    Thanks,
    Ramineni

    Hi Ramineni,
    Check this..
    WA_FCAT-TABNAME = 'I_OUTTAB'.
    WA_FCAT-FIELDNAME = 'AUFNR'.
    WA_FCAT-REF_TABNAME = 'AUFK'.
    WA_FCAT-HOTSPOT = 'X'.
    APPEND WA_FCAT TO I_FCAT.
    WA_FCAT-TABNAME = 'I_OUTTAB'.
    WA_FCAT-FIELDNAME = 'ACTL'.
    WA_FCAT-SELTEXT_M = 'Total Act Amount'(010).
    WA_FCAT-QFIELDNAME = 'TWAER'.
    WA_FCAT-QTABNAME = 'T_OUTTAB'.
    wa_fcat-decimals_o = '0'.
    APPEND WA_FCAT TO I_FCAT.
    CLEAR WA_FCAT.
    <b>Decimals in this will be restricted</b>
    Regards,
    Omkar.

  • How do we  difference between condition type   pr00 and pr02  in pricing

    hi sap - sd experts ,
    please help on  below issues .
    why the pr00 only picks in pricing instread of pr02  under similar circumstances like access sequence and  table.
    what make the difference  between pr00 and pr02 ..
    regards
    srini reddy
    91 - 9663 081 081
    Edited by: srinivasa vangala on Feb 15, 2010 11:01 AM

    Hi Mr. Srinivasa,
    As Mr. Damu said, your PR02 is not present in your pricing procedure thats why its not coming.
    2ndly go to V/06 and select PR00 and PR02 then see the details.
    You found the differences like Pricing procedure is different, cant process it manually.
    Regards,
    MT

  • BIZTALK EDIFACT decimal point issues

    HI,
    Am getting below error when i pass my EDIFACT file.
    SegmentID: MEA
    Position in TS: 337
    Data Element ID: C17402
    Position in Segment: 4
    Position in Field: 2
    Data Value: 11.557
    37: Invalid character(s) found in data element
    I have defined the properties for that in below image.
    c17402 datatype is EDIFACT_N, does it allow decimals?or could you please tell me where am making wrong?

    I already told you:
    You would need to change the EFactDelimiter to:
    0x3A, 0x2B, 0x2E, 0x3F, 0x20, 0x27
    instead of 
    0x3A, 0x2B, 0x2C, 0x3F, 0x20, 0x27
    Morten la Cour

  • Condition type is missing in Pricing Procedure determination

    Hi experts,
    We have a problem with Pricing Condition type in CRM.
    We have created a Transction in CRM as a follow up for the Transaction which is replicated from ECC to CRM the pricing procedure has been determined. But the net value is "0".
    when I checked in the conditions tab page "the condition type is missing" I checked Pricing Procedure the condition type is very much there. Then I checked for access sequence for that Condition type "Access sequence is also maintained.
    Then I checked copy controls for the Source and Target Item categories, for copy conditions the indicator is set up as "copy conditions,Redetermine taxes" then I changed it to "Copy all conditions".
    But still it is not happening.
    Can any please help me in this regard? Did I miss any configuration?
    Any help will be rewarded with points.
    Regards,
    Frederick.

    Hi Fredrick,
    This requirement must be assigned in your Pricing Procedure for condition type VKPO.
    The system first checks whether the requirement is fulfilled and than only execute that condition type.
    Requirements are nothing but Java Routines, which check for some condition before executing a condition type.
    For this Go to path
    IMG: CRM-> Basic Functions-> Pricing-> Define settings for Pricing-> Create Pricing Procedure.
    Choose your pricing procedure here. Here for the condition type VKPO requirement 41 must be assigned in column REQ. The requirements are coded in JAVA in SAP CRM.
    If this Pricing Procedure has been downloaded from SAP R/3, u can check in R/3 itself (Tcode: V/08) what the requirement is meant for, but choosing F1 and than the path for customizing.
    Regards,
    Shalini Chauhan
    Edited by: Shalini Chauhan on Apr 29, 2008 2:43 PM

  • Pricing Procedure Determination - Condition type

    Hello,
    Would like to know the use of maintaining condition type while maintaing the pricing procedure determination in OVKK transaction.In what way it would help?
    For standard procdeure RVAA01, standard condition type PR00 is maintained - May I know what impact it carries?
    Thanks.

    hi collins,
    this is to inform you that,
    this condition types you will set in pricing procedure in a sequence like.
    BASE PRICE
    DISCOUNTS
    +
    FRIEGHT
    +
    TAX
    gives raise to your final price
    in this sequence only you will arrange the pricing conditions in pricing procedure
    hope this clears your issue
    balajia

  • Can anyone explain what a condition type means in pricing.

    Hi,
    Can anyone explain what a condition type means in pricing. And how to create condition type and how it effects Pricing conditions.
    As I am new to this area. Detailed explanation is highly appreciated.
    Thanks a lot,
    Rasheed

    Hello Rasheed,
    Below mentioned are the few important things related to pricing.
    - You first define Condition Tables .
    - Define Access Sequence and assign condition tables to it.
    - Define Condition Type and assign Access Sequence to it.
    - Now define Pricing Procedure and assign Condition Type to it.
    - Now you define Pricing Procedure Determination using Sales Org, Distribution    Channel ,Division,Document  Pricing Procedure and Customer Pricing Procedure which are the key fields.
    The above steps can be done in SPRO.
    -Now maintain the Condition Records(for eg:For the specific material what is the cost or for a specific customer what is the cost of the specific material etc) using Txn:VK11.
    - Once you maintain the Condition Records , you can reflect the same values in Condition Type in SPRO.
    Hope this information is helpful for you to relate Condition Type in Pricing,
    Please reward with points if this information is helpful for you.
    Regards,
    Shanthala.

  • To make the Pricing Condition types inactive in Pricing Procedure

    Hi Experts,
    I am facing a senario where, in a sales order, pricing procedure, if one of the pricing condition type does not exist, then two other condition types (even though they are determined by condition records), should be either made inactive or should not appear in the pricing procedure.
    Example: If I have 3 condition types in Pricing Proc say
    YYY1, YYY2, YYY3, then the scenarios are
    a. If one of the condition types YYY1 is not determined, then, YYY2 and YYY3 should not be either determined in the sales order or should be made inactive. This same logic applies to both YYY2 and YYY3.
    b. If all three condition types are determined in Pricing Proc of the sales order, then, the price should be considered.
    If it was just YYY1 then, I could have done it in VOFM by writing a routine and assigning it to YYY2 and YYY3 in pricing proc. However, the scenario is to check the other condition types as well and make YYY1 inactive if any of the other condition type does not exist. Both condition types are determined after YYY1 which is another difficulty.
    I tried creating a dummy condition type  and assigning it to Pricing Proc (at the end of Pricing Proc). For this dummy condition I put in a pricing requirement which checks for all three condition types and if one does not exist, then it make other conitions inactive.
    However, this does not work in VA02 and VA03 as XKOMV is either not getting filled up or even if is getting filled, it is not having the condition type. It some times has condition records, and sometimes not... (not very sure why)
    So, I was thinking of using user exit for the same. However, I was unable to find a suitable user exit for the same where KONV table can be read or XKOMV can be filled.
    Can you please suggest if any user exit can be used for this or if we can implement it in a different way?
    Regards,
    Mukund S

    Hi,
    I think you can use condition exclusion functionality to select best pricing condition from a set of conditions in pricing.  You can compare conditions in many ways.
    I believe you can plot a solution with little research.  The below link is for your reference.
    [http://help.sap.com/saphelp_40b/helpdata/fr/93/743483546011d1a7020000e829fd11/content.htm]

  • Excise condition types not appearing in the Delivery document pricing

    Hi,
    This is a scenario of sales from an Exciseable Plant.
    The client has pricing requirement at delivery document.
    I have configured the pricing at Delivery document, but the Excise condition type (JEXP) does not appear.
    We are maintaine ED values at control code level and control code field is not availabe in LIPS, i tried adding the field in LIPS structure but still the ED condition type does not appear as program is not identifying the control code field in delivery.
    Can you please let me know the solution for bringing Excise condition type in the Delivery document pricing procedure.
    Regards
    Venkat

    Changed the Condition Category from 'F' to 'L'.

  • MM Pricing Condition Type values in Condition Tab updation while CHANGE PO.

    Hi,
    The process of PO creation and PO change is through inbound IDOC posting.
    I created a PO with configured MM pricing procedure.
    While creating PO, the PO is created as required with different Condition Type value break-ups [PBXX, Discount, Surcharge etc] in the PO as required via Inbound IDOC processing.
    While CHANGING the same PO, the Condition Type break-ups [i.e. pricing related values] in the PO are NOT changing in the PO via Inbound IDOC processing.
    What needs to be done to update the Condition Type break-ups in the PO while changing PO through IDOC processing process?
    This problem is not occured while manual / on-line changing of PO valueS and saving the PO & exists through IDOC processing method ONLY.
    Thanks in Adv,
    RK

    Hi
    Try this function module
    FM RV_CHECK_CONDITION_VALUE
    Regards
    Hareesh Menon

  • Pricing condition type and the procedure it belongs to

    Hello Experts,
    Pricing is found in basic function in spro.
    Under this we maintain the condition types.
    But how does the SAP system know for which pricing procedure a condition type belongs?
    Is a condition type uniquely usable by 1 pricing procedure only?
    Am i right to say the pricing procedure is set in the condition type properties screen?
    Have a nice day.
    regards
    Tom

    But how does the SAP system know for which pricing
         procedure a condition type belongs?
    System recognizes a condition type for which pricing procedure it belongs to, based on the document pricing procedure assignment you set in OVKK.
    Is a condition type uniquely usable by 1 pricing procedure only?
    No as long as the data maintained in V/06 is same, you can assign to en number of pricing procedures.  For example, you cannot have a different data maintained under the tab "Control data 1" in V/06 for one scenario and another value for another scenario.
    thanks
    G. Lakshmipathi

  • IN sharepoint 2013 custom list number type column ,decimal point shown as comma

    i have a sharepoint 2013 site in which a custom list is there. In number type field while i enter decimal number, instead of decimal point comma is comming. Any help appreciate
    Thanks sanjay

    Hi SanjayPradhan,
    According to your description, my understanding is that when type decimal point in number field, it became comma.
    I made a test in my enviroment and it works like a charm.
    Did you have some formula in that column ?
    If yes, I suggest you can check the formula in list settings->columns.
    If No, I suggest you can recreate a new list and number field to test whther it works.
    Best Regards
    Zhengyu Guo
    TechNet Community Support

Maybe you are looking for

  • Adobe Acrobat X Standard does not open PDFs made by previous versions

    Adobe Acrobat X Standard keeps giving an error while opening PDFs saying that "this document requires v7 (or v8) or higher to be opened" making it impossible to open any document that was created with earlier versions. After the message the files ope

  • MICROSOFT WORD OR MICROSOFT EXCEL 를 REPORT VEIWER로 설정하는 방법

    제품 : AOL 작성날짜 : 2005-04-26 MICROSOFT WORD OR MICROSOFT EXCEL 를 REPORT VEIWER로 설정하는 방법 ========================================================== PURPOSE MICROSOFT WORD OR MICROSOFT EXCEL 를 REPORT VEIWER로 설정하고자 할때 참고하는 문서 Explanation 아래와 같은 절차에 따라 IE에

  • Using WEP w/ DOS based PC and 350 card.

    We are currently using a DOS based PC that runs only a 5250 emulator. We connect to the network via a Cisco 350 card on a wide open wireless network. We have successfully set one of these units up to run of WEP side of our wireless. But all other uni

  • Re: Embed Youtube video indesign CC/CS6

    Is this also possible if it's destined for epub? I can't seem to get it to work. I've tried everything and searched multiple threads on the topic. Cannot find a single way to embed a youtube video that makes its way into iBooks.

  • MRUFolders=TRUE - doesn't work any longer?

    Colleagues, I've got trouble with MRUFolders option on my PC... It doesn't work any longer just for me or for everyone? LabVIEW 8.6f1 on WinXP Prof SP3. can someone else check it for me? Thank you, Andrey.