Condition type for condition record

Hi SAP All
             i configure the one round off condition type that type to give value is some points wise like that 0.10,0.30.0.65....but system not acceptation this values how to maintain.
     the round off condition type we r given manually or system will give na plz provide some more explanation regarding this one
   the solution help for me i will give points
regards
Raju

Hi,
If your basic requirement is just to round up condition values, you may use the following:-
You can tackle this by using standard routine in your pricing procedure.
In the 'Caltype' column in pricing that is "Condition formula for alternative calculation type", you need to add routine number "17 Rounding as perT001R", before those excise conditions which you want rounded.
Additionally, in table T001R such rounding data should be maintained.
For this goto SPRO - SAP NetWeaver - General Settings - Currencies - Define rounding rules for currencies
here maintain: Co, Code + Currency = 100
This will solve your problem
Regards
Dhananjay

Similar Messages

Condition Records For Tax Condition types for SAP 4.7

Dear Experts,
What is the procedure to maintain condition records for tax condition types like CST , VAT and Service Tax. We are not using CIN. In MM01 and XD02 tax classifications i have maintained UTXJ condition Type and also maintained the above mention tax condition types.. But when i create condition records for UTXJ in VK11 the sysytem is asking for Tax code. In FTXP when i defined Tax code A1 for Tax ProcedureTAXIN1 where i maintained all the Tax condition types there.But i am unable to save the Tax % in FTXP.When i try to save the tax code it is not saving.
Is there any other procedure to maintain Tax condition types for SAP4.7.
My Pricing procedure that i maintained in V/08 is Z00001.
Regards
Jyoti

Hi Jyoti
Since you are not using CIN, you can do the follwing for tax conditions
Check the assignment of the TAx procedure to country
once u do this , you will be able to maintin the vendor and customer records for MWST type for taxes
then create condition records for MWSt with access sequence MWST in condiution type or design one suited to your needs
alternatevely in the current procedure you can change access sequence for condition type UTXJ form the current one to MWST and then maintain condition records
hope this helps
thanks
Akasha

Standard Report with Condition Type and Condition Records

Hello to all,
Is there any standard report available in which Condition Type and Condition values are displayed in either column or row format? The selection criteria can be either Quotation, Contract, Sales Order, Delivery, Invoice or Billing. Thanks anyways...

Hi Huzefa,
Pls check the relevant table where the condition records are stored. then do a query with that condition table and KONP. say for eg: condn type ZINV,ZMRP gets stored in condition table A821, then combine A821 and KONP, u can input condition type and get the values........................
go to vk13, display and click on layout, u will able to see the condition table.
Rgds,
Anitha J

List of sales condition types for a material

Hi,
I have a material and maintained pricing and discount condition types for that material. I guess VK33 helps to view what condition types maintained for that material.
However when I tried VK33 and selected the material from the conditions from the node on the left hand side and entered the sales org, dist. channel and material and executed after I clicked on the display icon on the condition type, Sales org, Dchl material no conditions are displayed.
Please let me know how I can view the list of sales condition maintained for a specific material.
Thanks.

Hi Giri,
Thanks for the response.
In VK13 I should enter the condition type then I can hit condition information so that the details of all records maintained for a specific condition type will only be displayed but not for other condition types.
In V/LD, I am getting the list only for individual prices. If I insert 17 u2013 Discounts and surcharges by customer or 18 u2013 Discounts and surcharges by material, I am unable to get the list. Is it anything because of the u2018release statusu2019? We had not checked the u2018release statusu2019 field for the tables assigned to access sequence for the condition types.
As per the requirement business wants to view the list of u201CDiscounts and surcharges by customer/materialu201D. I think this is possible if I run the report provided by inserting values 17 or 18 but the unable to view the list. Any config settings required to activate?
Please let me know how to view the list of condition types.
Thanks

Z condition type for surcharge need to be displayed in billing doc only.

Hi ,
I am having going to create condition type for surcharge, this condition type need to be diplayed only in billing doc.condition value should be calculated based weight of the material in delivery doc and scales in condition record.
scales values are as below:
Access key:
sales org/dis channel/ route /sales unit(KG)
DE10/02/DETX1/   1 Kilo   =   30 u20AC
skales:
DE10/02/DETX1 / 31 Kilo = 35 u20AC
DE10/02/DETX1/ 41 Kilo =   40u20AC
DE10/02/DETX1/ 51 Kilo =   45u20AC
then for 52 Kilo we have price for these item with 52 Kilo = 45 u20AC
where exactly need to do the config and development changes for displaying in condition type in billing doc only.
Thanks in advance.
Regards,
RAM

In the Pricing Procedure , maintain requirement as 24 against the Z Condition type.Now it will reflect the value only in Billing Document.
Best Regards,
Ankur

Problem with multiple condition type for VAT &CST

Hi,Gurus,
pl. suggest the procedure for the following problem.we configured seperate pricing procedures for our product material and scrap material.We have configured same condition types for VAT(ie.condition type:ZVAT) and CST(cond type:ZCST), in both pricing procedures. Now We want to maintain seperate condition types for VAT and CST for pricing procedure for Product material and Scrap material. I have created two new condition types for scrap sales ZSCT- cst for scrap and ZSVT-vat for scrap by copying the same from existing conditions ZCST & ZVAT, and the same is included in the scrap pricing procedure. And also maintained OB40,OBCN,OVK1,OVK3,OVK4, FTXP,FV11 and VK11.
now I am facing the following problems.
1. while creating the Material master & customer master, in tax category sub screen all conditions i.e. conditions defined for product material( ZCST,ZVAT) and defined for scrap material (ZSCT, ZSVT) displaying and these are compulsory fields.
2. While creating the sale order for scrap material, system is considering the TAX classes from ZVAT/ ZCST (defined for product material) and taking the condition value from the condition type ZSVT/ ZSCT with the TAX class values of ZVAT/ZCST.
Now I would like to know is there any procedure to assign the Material type and Customer Account group to Tax category.
Thanks & Regards
sam

Hello Sam,
The Access Sequence Assigned to your New Condition types ie, ZSCT and ZSVT are same as the Previous Condition type ZVAT and ZCST.
After Adding new condition type in the Tax category in the Masters you have to take care of the Sequence of the Condition type.
If ZSCT and ZSVT is on the 3rd and 4th number in the masters the Condition table you are using in the access sequence should have fields Taxclassification3-Customer and taxclassification3- material. For ZSCT
Likewise Taxclassification4-Customer and taxclassification4- material. For ZSVT
Please add New Condition table in the access sequence with the required Field
And next when you are maintaining the condition record for say ZSCT you will have to maintain condition record for the condition table which has Taxclassification3-Customer and taxclassification3.
In Document the values will be flown correctly after changing this.
Hope I have Solved your Query.
If any Doubt please revert.
Regards,
Rohit Dongre

Wrong calculation for condition type for misc. provision in service PO

Hi Gurus,
In service PO line item, we have maintained customised condition type for misc provision. this is % based on net price. It has been assigned account key and accrual key. It's manual. Logically, it should calculate the value based on the total of the net values of all service lines and post a single entry for all concerned service lines. What system is actually doing, it calculates the value correctly for total of net values of service lines in that PO line item but post it to the account as many number of times as the number of service lines in that line item.
This is when service based IV is active for the PO line item. If I deactivate this, then it post the account once only which is ok.
Please explain this behaviour. Also, I want to activate service based IV, what should I do to this condition type. Is there any condtion base formula or condtion value formual to be assigned in the pricing procedure?
Thanks in advance,
Sudhir Dahake

Hi,
Check if some user exit/ routine is written for the condition type.
Check user exit RV60AFZZ, RV60AFZA, RV60AFZB,RV60AFZC for some code.
If it is a manual condition check COPY CONTROLS or if it is automatic check condition records from which it is calculated based on qty, price, material type, etc.
Regards,
Amit

Condition type for fee - no change of moving price or balance sheet account

Hi, hope you can help me.
We need a new condition type for a kind of fee which has to be paid to the vendor and used in the purchase order.
This is a condition type which
- has to be part of the invoice
- has to be posted as a kind of accrual
- must not! change the price of the material or the balance sheet account
If we use freight conditions the moving price is changed.
Because it is dependent on the material (and therefore a condition record works great) we can't or better don't want to use a second position in the purchase order.
Does anybody have a solution for this one?
PC

Thanks for the answer!
This is what I already tried, but it still changes the balance sheet account and the moving average price.
This is what I customized:
Condition ZXYZ
Cond. class A
Calculat.type C
Cond.category B
Item condition yes, delelte, amount/percent and Qte relation yes
Scale base C
Accruals yes
In the Calculation Schema it's defined just before the Actual Price, with Statistical-checkbox marked and Account key ZE1, Account key - accruals / provisions ZE2.
Do you have any idea what I have to change or what else to try?
Thanks a lot!

Create a new condition type for tax... and assign in the Tax determniation

Hi,
I need to add custom condition tax type, i tried creating the condition in OBQ1 and add that condtion in FI pricing OBQ3, now I want to confirm what is basic conept means whenever we create on condtion in OQB1 and add in OBQ3.
i need to add that in Sales order and need to maunally populate that in the sales order.
could anybody suggest to create a new condition type for tax.(full process).
Thanks
shankar

Hi,
Goto the T.Code "V/06".Create one new "Z" condition type.
Maintain the Condition Class as "D(Taxes)".
Calculation type as "A(percentage)".
Cond. Category as "D(Tax)".
Select the tick mark for "Group Condition" if it is applicable for you.
In the next step assign this condition type to your pricing procedure by using the T.Code "V/08".
Also maintain access sequence by using the T.Code "V/07" and assign it to your Condition type.
Now this condition type will appeared in your sales order after maintain teh condition records.
Regards,
Krishna.

Vendor in condition type/purch info record

hi,
in condition type, i notice in account determination, there is a vendor field. but this vendor field not exist in all condition type. only freight/customs related with this vendor field.
1) may i know how does the system know whether the condition type needs vendor field or not.
2) in purchase info record, can we defined second vendor as transporter on top of first vendor which is supplier? if can where can i defined as i cant see second vendor in PIR.
thanks
rgds

Hi,
1) may i know how does the system know whether the condition type needs vendor field or not.
Ans:- While creation of Condition type in SPRO we put the condition category as D that is deleivery costs. This determines that this condition type can have Vendor field.
2) in purchase info record, can we defined second vendor as transporter on top of first vendor which is supplier? if can where can i defined as i cant see second vendor in PIR.
Yes you can. Select the COndition type button which appears on top of info record change/creation. Then choose the validity date. Then enter the delivery condition type for e.g FRA1 which is standard one and enter the amount then selet this condiin type and clik on details button or F6 key you will see the vendor field.
Thanks
Shashi
Please give points if info is help ful

Condition Type for commissions across sales orders

Hi,
I have a requirement for which I need inputs:
We have sales employee who will get commissions based on the total sales they make. The relevant sales employee will be brought into SAP as a business partner (specific account group and hence partner function).
A tiered commission would be set up for each of the sales employee, for e.g. 1 to 10,000 , commission is 2 %, 10,000 to 30,000 commission is 3 % and above that is 5 %. The commission applicable should be determined at the time of sales order creation. The commission applied to an order should be determined based on all the sales orders for the sales employee and not that specific sales order. For e.g. if the sales employee has already got one sales order of worth 6000 and he gets another order of worth 9000, then as per the example, he is entitled to 2 % for 4000 of the order (his total sales now reacheds 10,000 and he moves now into the next bracket) and is entitled to 3% for 5000 of the order value. Also in case any order gets cancelled then the cumulative sales value for the sales employee should take care of the cancelled order.
I have a condition type where by I maintain the scale and the corresponding commision rates for the sales employee. I have ticked the condition update setting so as to cumulate the order value. I have the following questions:-
1. How do I ensure that the rate applicable for the specific order takes into consideration the past sales orders for the sales employee and not only that sales order.
2. How do I determine the condition record based on parter function (partner funtion for the sales employee)? I did bring in the partner role in the pricing communication structure but that does not work.
3. How should I take care that the cancellation or sales order takes out that value from the cumulative value for the condition record. As of now it does not.
A quick response would be highly appreciated.

Hi Kastubha,
Thanks for your reply. I am trying now to use rebates for this functionality. However I have few questions and I am unable to progress beyond a point:
Let's say that for a sales employee i set the rebate agreement. The sales employee's commission is as follows:
1 - 10,000 (1 %)
10, 000 - 30,000 (3%)
30,000 and above (5%)
The calculation type for condition type is percentage, scale type is graduated to interval scale.
I am trying to use scale in rebate agreement to set up the commission structure for the sales employee. However, there is only accrual rate that I can enter. There is no place to enter the accrual rates as per the scale.
Because of this, what is happening that the rebate record determined is the accrual rate and not what is as per the scale. Also I need the condition record to keep track of total sales for the employee so that it knows what commission rate to apply based on how much the sales employee has achieved.
Am waiting for you inputs.
Best Regards,
Sunil

Which Access sequence will use for sales tax condition type for TAXINN

hi.,
which Access sequence will use for sales tax condition type for TAXINN procedure.pls give one example (Access sequence) and give fields.
Because i couldnot create the condition record,the system not accepted for tax indicator.
Regards.,
lakshmanan

We also got the same problem with our client and escalated it to SAP.
they advised to use the access sequence JIND which consists of condition tables in the order given below
Step Condn Table
10 354
20 355
30 40
Attach this to your condition types.
Rewards if it helps.
Regards,
Anbu

New Condition type for pricing

Hi,
I have a requirement wherein I want to create new condition type for add on cost of material with manaual entry . this condition is to be given in inforecord.
How to proceed? also, this contion type to be inserted in pricing schema??

Dear Smitha,
You may ask what is the condition type?
For example:
- discounts, surcharges or tax taxes add to net price
- delivery costs, cash discounts add to effective price
Discounts or surcharges may be percentage based, quantity dependent, or absolute.
Best Regards,
ian, Wong Loke Foong

New condition type for freight

hi,
i want to create new condition type for freight like some different ways of transportation like (roadrailair), three are at a time, which user exit i want to take and where it will trigger

hi,
as you have to have three condition types for sales order
ROAD - VENDOR1 - ZVE1
RAIL - VENDOR2 - ZVE2
ROAD - VENDOR3 - ZVE3 - into sales order.
create a screen exit and add this in your delivery addational tab page - MANUAL ENTRY BY THE USER.
with
LEG 1 - ROAD - VENDOR1 - ZVE1
LEG 2 - RAIL - VENDOR2 - ZVE2
LEG 3 - ROAD - VENDOR3 - ZVE3
create a Z table which captures the information for this.
and link this table to FB70 - t.code
and settle it individually as per FFA.
balajia

Condition types for Material

Hi,
I have got a scenario where the customer is going to maintain "Z" condition types for a material(1 for sales price and 1 for purchase price). I can read the correct price for this material at the Sales Order maintenance and PO maintenance using some standard function modules
SALES_CONDITION_READ/ME_PO_PRICE_SIMULATION.
as these condition types are maintained in the pricing schema and hence are returned in the correctly.
I have problem when I try to read the purchasing price for this condition type(material) while creating the sales order. Here I have only the material information to read the price. Can anybody suggest how I can read the correct purchase price while creating the sales order.
Thanks in advance.
Best Regards
Malthi

HI Malthi
I would recommend you use BAPI: BAPI_SALESORDER_SIMULATE. This will give you the conditions how the sales order is going to look when itz created.
This BAPI is mainly used for:
1. Checking ATP Qunatities
2. Conditions/Prices
Hope this helps.
Kind Regards
Eswar

Condition type for condition record

Similar Messages

Maybe you are looking for