Condition type for Excise
can anyone tell me what is the condition type i should maintain for AED SED Cess, EDcess
Pls guide me in configuring Pricing procedure
Hi,
If you don't mind can you please based on the following manner what are the condition types i have to consider in standard SAP
My pricing procedure is like this
gross price + excise % ( BEDAEDCESS+Edu.CESS)
for Gross Price i took in standard SAP : PB00
My doubt is what is the condition type for BED : ?
AED : ?
CESS : ?
Edu.CESS : ?
Because i am new to CIN
Please guide me based on the above inputs
Regards,
Sachin
Similar Messages
-
Condition type for Excise Duty
Dear All,
I have to maintain a new condition type for excise duty @ 10.3%, at present the excise duty is non deductible and the CIN is not activated and not used.
It should also have the option to manually input the tax value at the time of creating a PO.
Kindly Help...
Regards,
PrashantThanks for your reply SNB..
Excise duty non deductible means that they have not defined any condition type for Excise and its totally new
Yes, its through tax code and the tax procedures are to be used.
The client has only provided the rates i.e, 10.3% and a g/l account for Excise in which this amount should get posted to automatically.
Kindly Suggest..
Regrds -
Quantity based condition type for excise duty calculation in tax procedure
Hi,
If any one has worked on the issue of excise duty calculation on Quantity of items purchased Quantity based condition type.
[<b>For a formula based calculation procedure TAXAU]</b>
Example : If quantity purchased = 10 units
Duty to be calculated @ Rs.3 per unit
Duty on the 10 units = Rs.30
Other than SAP Note 816835 any help is appreciable.
Thanks a lot,
Uma
Message was edited by: UmaI could not find this condition type/Tcode in our client system.
Even we are on 4.6c.
Thanks,
Message was edited by: Uma -
VK11 Condition types for taxes
Hey, I'm attaching the print screen of Vk11 for taxes. I don't understand what is the use of taxcode(highlighted) on the image. I have seen F1, but it doesn't make any sense to me.... I'm putting the tax rate % in the amount field... What is the use of Region? Is it the region of a customer? Any help is appreciated.
ThanksAasish, Thanks for the reply. In the Taxes on Purchases/Sales, I have configured 2 tax codes (O1 & O2). O1 has taxes Excise duty, Cess & VAT, whereas O2 has Excise, Cess & CST).
Now configuring condition type for tax VAT using VK11 using key combination Plan/Region/Delivery PLant REgion/ etc, I have entered the tax code as O1.
What is Tax code acting as here? I know it is not retrieving any tax rates mentioned in Taxes on Sales/Purhases section as I have maintained same Account Keys in both the areas but condition types are different....
If I am defining condition type for Excise, what is the tax code I have mention here.. Will it be O1 or O2?
Thanks -
Hi,
Is there any Standard Condition Type for VAT (both deductable & non-deductable) & Service Tax?
Also we want to maintain excise related information thru J1ID for Materials to be procured externally from vendors. Is there any additional configuration to be done?
Regards,Dear Aditi,
Please find the following details as required by you
Conditions related to VAT:
JVRD- A/P VAT RM Deductibl (JVRD is with reference to JIPC)
JVRN-A/P VAT RM Non Deduc (JVRN is with reference to JIPC)
JVCD-A/P VAT CG Deductibl (JVCD is with reference to JIPC)
JVCN-A/P VAT CG Non Deduc (JVCN is with reference to JIPC)
JVCS A/P CST Non Deductible under VAT (JVCS is with reference to JIPC)
JSTX-A/P ServiceTax (JSTX is with reference to JIPC)
You will have to incorporate it in TAXINN
And you will have to maintain the Conditon for Plant/MAterial and vendor combination in FV11
with % of VAT and TAX code (it can be created by FTXP (input/Output tax))
Account keys for The Above condition types
EC1 A/PE-CessExcise
EC2 A/PECess-ServiceTax
EC3 A/PSECess-ServiceTax
ESA Outputacquisitntax
ESE Inputacquisitntax
JI6 A/PSECEss
JP4 A/PCSTNonDeductib
JP5 A/PVATRMDeductibl
JP6 A/PVATRMNonDeduc
JP7 A/PVATCGDeductibl
JP8 A/PVATCGNonDeduc
NVV Non-d.inputtaxdist
ST1 A/PServiceTax
VS1 Salestax1
VS2 Salestax2
VS3 Sales tax 3
VS5 InputTaxPSTGross
VS6 InputTaxHSTs/a
VS7 InputtaxGSTs/a
Hope it will help you
Regds
shailesh -
Condition type for Amortisation cost
Dear friends,
I hve created condition type for amortisation cost in pricing.
It is adding the value for the gross price+ amortisation cost and flowing it to calculation of excise Duty in BASB.
For ex.
P001 - 1000
ZDIE - 100
so BASB - 1100
Excise Duties are calculated on 1100...That is also OK
But when the calculation of CST- As per system it is calculated on 1100 (BASB)....
And here client requirment is to calculate on P001(Gross Price).
Again calculation of
A/P Price + ED + VAT it is taking A/P Price as 1100.
Our requirement is to take it P001 as 1000.
How to take amortization cost to be considered only for the calculation of excise duties and rest calculation in tax procedure being considered on Gross Price.......
Plz. suggest
Thanks in Advance,
navinI hope you have searched regarding the topic.
Refer following SDN wiki link for all your anwers:
- [ EK01/EK02/VPRS |http://wiki.sdn.sap.com/wiki/display/ERPLO/VPRS,+EK01(ActualCost)andEK02(Calculated+Cost)]
Regards
JP -
List of sales condition types for a material
Hi,
I have a material and maintained pricing and discount condition types for that material. I guess VK33 helps to view what condition types maintained for that material.
However when I tried VK33 and selected the material from the conditions from the node on the left hand side and entered the sales org, dist. channel and material and executed after I clicked on the display icon on the condition type, Sales org, Dchl material no conditions are displayed.
Please let me know how I can view the list of sales condition maintained for a specific material.
Thanks.Hi Giri,
Thanks for the response.
In VK13 I should enter the condition type then I can hit condition information so that the details of all records maintained for a specific condition type will only be displayed but not for other condition types.
In V/LD, I am getting the list only for individual prices. If I insert 17 u2013 Discounts and surcharges by customer or 18 u2013 Discounts and surcharges by material, I am unable to get the list. Is it anything because of the u2018release statusu2019? We had not checked the u2018release statusu2019 field for the tables assigned to access sequence for the condition types.
As per the requirement business wants to view the list of u201CDiscounts and surcharges by customer/materialu201D. I think this is possible if I run the report provided by inserting values 17 or 18 but the unable to view the list. Any config settings required to activate?
Please let me know how to view the list of condition types.
Thanks -
New Condition type for pricing
Hi,
I have a requirement wherein I want to create new condition type for add on cost of material with manaual entry . this condition is to be given in inforecord.
How to proceed? also, this contion type to be inserted in pricing schema??Dear Smitha,
You may ask what is the condition type?
For example:
- discounts, surcharges or tax taxes add to net price
- delivery costs, cash discounts add to effective price
Discounts or surcharges may be percentage based, quantity dependent, or absolute.
Best Regards,
ian, Wong Loke Foong -
New condition type for freight
hi,
i want to create new condition type for freight like some different ways of transportation like (roadrailair), three are at a time, which user exit i want to take and where it will triggerhi,
as you have to have three condition types for sales order
ROAD - VENDOR1 - ZVE1
RAIL - VENDOR2 - ZVE2
ROAD - VENDOR3 - ZVE3 - into sales order.
create a screen exit and add this in your delivery addational tab page - MANUAL ENTRY BY THE USER.
with
LEG 1 - ROAD - VENDOR1 - ZVE1
LEG 2 - RAIL - VENDOR2 - ZVE2
LEG 3 - ROAD - VENDOR3 - ZVE3
create a Z table which captures the information for this.
and link this table to FB70 - t.code
and settle it individually as per FFA.
balajia -
Hi,
I have got a scenario where the customer is going to maintain "Z" condition types for a material(1 for sales price and 1 for purchase price). I can read the correct price for this material at the Sales Order maintenance and PO maintenance using some standard function modules
SALES_CONDITION_READ/ME_PO_PRICE_SIMULATION.
as these condition types are maintained in the pricing schema and hence are returned in the correctly.
I have problem when I try to read the purchasing price for this condition type(material) while creating the sales order. Here I have only the material information to read the price. Can anybody suggest how I can read the correct purchase price while creating the sales order.
Thanks in advance.
Best Regards
MalthiHI Malthi
I would recommend you use BAPI: <b>BAPI_SALESORDER_SIMULATE</b>. This will give you the conditions how the sales order is going to look when itz created.
This BAPI is mainly used for:
1. Checking ATP Qunatities
2. Conditions/Prices
Hope this helps.
Kind Regards
Eswar -
Z condition type for surcharge need to be displayed in billing doc only.
Hi ,
I am having going to create condition type for surcharge, this condition type need to be diplayed only in billing doc.condition value should be calculated based weight of the material in delivery doc and scales in condition record.
scales values are as below:
Access key:
sales org/dis channel/ route /sales unit(KG)
DE10/02/DETX1/ 1 Kilo = 30 u20AC
skales:
DE10/02/DETX1 / 31 Kilo = 35 u20AC
DE10/02/DETX1/ 41 Kilo = 40u20AC
DE10/02/DETX1/ 51 Kilo = 45u20AC
then for 52 Kilo we have price for these item with 52 Kilo = 45 u20AC
where exactly need to do the config and development changes for displaying in condition type in billing doc only.
Thanks in advance.
Regards,
RAMIn the Pricing Procedure , maintain requirement as 24 against the Z Condition type.Now it will reflect the value only in Billing Document.
Best Regards,
Ankur -
Not possible to determine a condition type for the price in ME49
Hi,
While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
Not possible to determine a condition type for the price
Message no. 06657
Diagnosis
When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
Procedure
Contact your system administrator.
The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
UtsavHi Utsav,
You can refer to the following link. it might be useful to you
RFQ price
Thanks
Nisha -
Problem with multiple condition type for VAT &CST
Hi,Gurus,
pl. suggest the procedure for the following problem.we configured seperate pricing procedures for our product material and scrap material.We have configured same condition types for VAT(ie.condition type:ZVAT) and CST(cond type:ZCST), in both pricing procedures. Now We want to maintain seperate condition types for VAT and CST for pricing procedure for Product material and Scrap material. I have created two new condition types for scrap sales ZSCT- cst for scrap and ZSVT-vat for scrap by copying the same from existing conditions ZCST & ZVAT, and the same is included in the scrap pricing procedure. And also maintained OB40,OBCN,OVK1,OVK3,OVK4, FTXP,FV11 and VK11.
now I am facing the following problems.
1. while creating the Material master & customer master, in tax category sub screen all conditions i.e. conditions defined for product material( ZCST,ZVAT) and defined for scrap material (ZSCT, ZSVT) displaying and these are compulsory fields.
2. While creating the sale order for scrap material, system is considering the TAX classes from ZVAT/ ZCST (defined for product material) and taking the condition value from the condition type ZSVT/ ZSCT with the TAX class values of ZVAT/ZCST.
Now I would like to know is there any procedure to assign the Material type and Customer Account group to Tax category.
Thanks & Regards
samHello Sam,
The Access Sequence Assigned to your New Condition types ie, ZSCT and ZSVT are same as the Previous Condition type ZVAT and ZCST.
After Adding new condition type in the Tax category in the Masters you have to take care of the Sequence of the Condition type.
If ZSCT and ZSVT is on the 3rd and 4th number in the masters the Condition table you are using in the access sequence should have fields Taxclassification3-Customer and taxclassification3- material. For ZSCT
Likewise Taxclassification4-Customer and taxclassification4- material. For ZSVT
Please add New Condition table in the access sequence with the required Field
And next when you are maintaining the condition record for say ZSCT you will have to maintain condition record for the condition table which has Taxclassification3-Customer and taxclassification3.
In Document the values will be flown correctly after changing this.
Hope I have Solved your Query.
If any Doubt please revert.
Regards,
Rohit Dongre -
Condition types for works tax, SDT,MANDI TAX
Hi All,
are there any condition types for the following:
Mandi Tax,
other taxes(any other taxes)
state development taxes,
works tax
entry tax
it is required to create condition types and put in pricing schema in po or these condition types are defined in tax code and are copied in pricing procedure.
thanks and regardsthanks for giving your valuable time,
We are on ECC 6.0, and these conditions are not appearing in the condition table. I could not go thru these conditions. I referred the SAP NOTE NO 9552289, validity since 8.1.2007 where in the attachment of TAXINN with screen shot is there.
Further clarification
In the forum it was mentioned JVRD - VAT Non deductible and JVCS - CST deductible, is it a typing error. My writing is not for pointing you as wrong, but for taking the understanding.
I appreciate your knowledge and great understanding on subject.
regards -
Profit Center on Condition Types for Taxes
We have a billing document whose pricing procedure included two condition types for billing. A single material was delivered and billed but the two line items for the taxes were posted to different profit centers. Where did the difference could have come from?
Hi
Tell me in which version you are in?. What are the account assignments for those condition types?. Do you have multiple sales accounts for that entry?.
Jayaram
Maybe you are looking for
-
My Apple TV does what it says it does and is useful. However I think it is a miss. I also have my Powerbook hooked up directly to a projector and using a wireless keyboard and mouse. I looked over the back shelf in the theater where the projector sit
-
Imposible to restart netbook T130
Hello all, please is here anybody who could help me to solve my problem. Restart of my notebook with Win7 does not work correctly. If I click on "restart" my notebook is shut down. If any update require restart system, instead of restart system my no
-
Hyperlinks in my WORD document are disabled once converted to ADOBE. How can I fix?
Problem just started once I had to reload ADOBE to a new laptop. Suggestions?
-
HT5429 How do I view Apple Maps on Windows and Mac?
Apple must be smoking something good if they think Apple Maps can be improved without allow users of Mac OS, Linux and WIndows computers see and edit the maps somehow. Which raises the question: how do I edit my Apple maps listing? On Google Maps it
-
I have two ListViews, displaying the contents of two ImageLists ("ImageList1" & "ImageList2"): (mockup) The goal: User checks a box on the left AND a box on the right, replacing the right-checked image with the one on the left. My code: ImageList1.Im