Condition type for fee - no change of moving price or balance sheet account

Hi, hope you can help me.
We need a new condition type for a kind of fee which has to be paid to the vendor and used in the purchase order.
This is a condition type which
- has to be part of the invoice
- has to be posted as a kind of accrual
- must not! change the price of the material or the balance sheet account
If we use freight conditions the moving price is changed.
Because it is dependent on the material (and therefore a condition record works great) we can't or better don't want to use a second position in the purchase order.
Does anybody have a solution for this one?
PC

Thanks for the answer!
This is what I already tried, but it still changes the balance sheet account and the moving average price.
This is what I customized:
Condition ZXYZ
  Cond. class   A
  Calculat.type C
  Cond.category B
  Item condition yes, delelte, amount/percent and Qte relation yes
  Scale base C
  Accruals yes
In the Calculation Schema it's defined just before the Actual Price, with Statistical-checkbox marked and Account key ZE1, Account key - accruals / provisions ZE2.
Do you have any idea what I have to change or what else to try?
Thanks a lot!

Similar Messages

  • Z condition type for surcharge need to be displayed in billing doc only.

    Hi ,
    I am having going to create condition type for surcharge, this condition type need to be diplayed only in billing doc.condition value should be calculated based weight of the material in delivery doc and scales in condition record.
    scales values are as below:
    Access key:
    sales org/dis channel/ route /sales unit(KG)
    DE10/02/DETX1/   1 Kilo   =   30 u20AC
    skales: 
    DE10/02/DETX1 /  31  Kilo =  35 u20AC 
    DE10/02/DETX1/  41 Kilo  =   40u20AC
    DE10/02/DETX1/  51  Kilo =   45u20AC
    then for 52 Kilo we have price for these item with 52 Kilo =  45 u20AC
    where exactly need to do the config and development changes for displaying in condition type in billing doc only.
    Thanks in advance.
    Regards,
    RAM

    In the Pricing Procedure , maintain requirement as 24 against the Z Condition type.Now it will reflect the value only in Billing Document.
    Best Regards,
    Ankur

  • Problem with multiple condition type for VAT &CST

    Hi,Gurus,
    pl. suggest  the procedure for the following problem.we configured  seperate  pricing procedures for our product material and scrap material.We have configured same condition types for VAT(ie.condition type:ZVAT) and CST(cond type:ZCST), in both pricing procedures. Now We want to maintain  seperate condition types for VAT and CST for pricing procedure for Product material and Scrap material. I have created two new condition types for scrap sales ZSCT- cst for scrap and ZSVT-vat for scrap by copying the same from existing conditions ZCST & ZVAT, and the same is included in the scrap pricing procedure. And also maintained OB40,OBCN,OVK1,OVK3,OVK4, FTXP,FV11 and VK11.
    now I am facing the following problems.
    1. while creating the Material master & customer master, in tax category sub screen all conditions i.e. conditions defined for  product material( ZCST,ZVAT) and defined for scrap material (ZSCT, ZSVT) displaying and these are compulsory fields.
    2. While creating the sale order for scrap material, system is considering the TAX classes from ZVAT/ ZCST (defined for product material) and taking the condition value from the condition type ZSVT/ ZSCT with the TAX class values of  ZVAT/ZCST.
    Now I would like to know is there any procedure  to assign the Material type and Customer  Account group to Tax category.
    Thanks & Regards
    sam

    Hello Sam,
    The Access Sequence Assigned to your New Condition types ie, ZSCT and ZSVT are same as the Previous Condition type ZVAT and ZCST.
    After Adding new condition type in the Tax category in the Masters you have to take care of the Sequence of the Condition type.
    If ZSCT and ZSVT is on the 3rd and 4th number in the masters the Condition table you are using in the access sequence should have fields  Taxclassification3-Customer and taxclassification3- material. For ZSCT
    Likewise Taxclassification4-Customer and taxclassification4- material. For ZSVT
    Please add New Condition table in the access sequence with the required Field
    And next when you are maintaining the condition record for say ZSCT you will have to maintain condition record for the condition table which has Taxclassification3-Customer and taxclassification3.
    In Document the values will be flown correctly after changing this.
    Hope I have Solved your Query.
    If any Doubt please revert.
    Regards,
    Rohit Dongre

  • Condition types for import pricing

    hi,
         the conditions types for import pricing procedure are not appearing.
    please suggest all the notes from where i can take reference and create the condition types for import process.
    please also suggest what are they?
    with regards

    Hi anitha,
    In case of import purchase. u have to configure the conditions in pricing procedure.  The condition types are as follows:
    1)jcdb               basic customs
    2)jcv1               CVD
    3) jec1               ECS on CVD
    4)jed1              cess on customs
    5) j1cv                secess on cvd
    6) jsdb               secess on customs
    Go to the master note no 1032295 for recent budget changes.
    award points if found useful
    chintu

  • Pricing: Condition type for advance "ZADV" can be enterted twice

    Hello,
    I have defined condition type for advance as ZADV in pricing procedure.
    Issue: Now teh end user is able to enter the advance conditype types "ZADV"  in the sales order, is it any way possible that it should not allow the condition type to be entered twice.
    Regards
    Suvin.S

    HI,
    Issue: Now teh end user is able to enter the advance conditype types "ZADV" in the sales order, is it any way possible that it should not allow the condition type to be entered twice.
    1*.Suppose Condition type ZADV having Condition Class "Discount or Surcharge " system will allow to enter manually second time also*
    2. Suppose Condition Type ZADV is mandatory to few customer and also customers then do the some changes in the condition Type under the Tab "Changes which Can be made " we can find out the Manual Entries fields in that try to mentioned "D      - Not possible to process manually "
    Regards,
    Prasanna
    Edited by: prasanna_sap on Sep 6, 2011 8:35 AM

  • Condition Records For Tax Condition types for SAP 4.7

    Dear Experts,
    What is the procedure to maintain condition records for tax condition types like CST , VAT and Service Tax. We are not using CIN. In MM01 and XD02 tax classifications i have maintained UTXJ condition Type and also maintained the above mention tax condition types.. But when i create condition records for UTXJ in VK11 the sysytem is asking for Tax code. In FTXP when i defined Tax code A1 for Tax ProcedureTAXIN1 where i maintained all the Tax condition types there.But i am unable to save the Tax % in FTXP.When i try to save the tax code it is not saving.
    Is there any other procedure to maintain Tax condition types for SAP4.7.
    My Pricing procedure that i maintained in V/08 is Z00001.
    Regards
    Jyoti

    Hi Jyoti
    Since you are not using CIN, you can do the follwing for tax conditions
    Check the assignment of the TAx procedure to country
    once u do this , you will be able to maintin the vendor and customer records for MWST  type for taxes
    then create condition records for MWSt with access sequence MWST in condiution type or design one suited to your needs
    alternatevely in the current procedure you can change access sequence for condition type UTXJ form the current one to MWST and then maintain condition records
    hope this helps
    thanks
    Akasha

  • MM-PUR default scales for condition types for service (ME31K

    Hi,
    We have faced the following problem:
    The business case was, to have default scales for certain condition types for a service for a purchasing contract.
    We didn't find it in SAP, so we wrote an OSS. SAP answered that it's not possible now, nor in the future.
    So we decided to look around in SAP, and found out that it was half possible.
    I've abused the exit USEREXIT_XKOMV_BEWERTEN_INIT of program RV61AFZB.
    In this exit I provide the internal table staffel for program SAPMV13A with the correct information (via ASSIGN ('(SAPMV13A)STAFFEL[]') to <staffel>.)
    In this way, if a user adds a service, this exit will get reached and the scales are filled. If the user then clicks on conditions and then double clicks the condition type with the scales, all the default scales are shown to the user. If you then click on save, the next screen is the service screen, if you then click on save again, all the date is stored in the database. (bit of a work around, but this works)
    However, I can't figure out how to save the scales data, when you only add a service and then push the save button without viewing the conditions. Quite logically actually because I'm skipping two whole screens with pbo and pai modules, in these modules internal converting takes place.
    Has anyone encountered this problem before and how did you solve it then ?
    Alternatively what is the SAP standard way to add pricing condition scales on condition types of a service of a purchasing contract? As you know there is no BAPI yet to change/create a purchasing contract.
    I was thinking, to add the scales by updating the tables directly via ABAP, I know that's not a clean way to do it, although it isn't too risky.
    Kind regards, Rob Dielemans

    Dear Rob,
    Is this solution properly working for you?
    I think my problem is similar: purchasing outline agreement (contract) refuses to apply relevant scale prices in the item line. Always uses the first price - without considering order quantity depencies.
    Regards,
    Tamás
    Edited by: Tamas Szabo on Mar 31, 2009 3:50 PM

  • Condition Type for PO Input Tax

    Good day!
    I have created a PO but the Input tax does not appear in the Condition tab. I want to change the condition type code but it is not editable. How will I be able to change the condition types for my PO?
    Thank you.

    HI,
    The conditions type defined in the pricing procedure will come over during the pricing calculation while creating PO,
    If you want to change the condition type you got to do it in the pricing procedure.
    Thanks & Regards,
    Kiran

  • Using RB00 condition type for Price Adjustment

    Hi,
    I have to do a price adjustment due to some rounding issues in the pricing of my sales order.(Using standard Pricing Procedure RVAA01). I am thinking of using manual condition type RB00 at Item level that can accept both positive and negative values depending on the situation.
    If the calculated value>expected value then the user will enter negative RB00 value manually and
    if the calculated value<expected value then the user will enter positive RB00 value manually.
    The account key is however different in standard Pricing procedure for RB00 and it is ERS and for standard Base Price (PR00) it is ERL.
    So, my question is that does that make any difference if I maintain condition records in VKOA for RB00 same as PR00?

    Hi
    If you are looking for rounding then you round the decimals by not maintaining any decimals.But if it is a price adjustment then your approach is correct
    If it is VK11 then there is no need to maintain condition record for RB00 as it is a manual condition type at item level
    If you are talking to maintain revenue account determination VKOA then you have to maintain as whenever you give discount then it will hit some G/L account .So you should assign a G/L account also
    Regards
    Srinath

  • List of sales condition types for a material

    Hi,
    I have a material and maintained pricing and discount condition types for that material. I guess VK33 helps to view what condition types maintained for that material.
    However when I tried VK33 and selected the material from the conditions from the node on the left hand side and entered the sales org, dist. channel and material and executed after I clicked on the display icon on the condition type, Sales org, Dchl material no conditions are displayed.
    Please let me know how I can view the list of sales condition maintained for a specific material.
    Thanks.

    Hi Giri,
    Thanks for the response.
    In VK13 I should enter the condition type then I can hit condition information so that the details of all records maintained for a specific condition type will only be displayed but not for other condition types.
    In V/LD, I am getting the list only for individual prices. If I insert 17 u2013 Discounts and surcharges by customer or 18 u2013 Discounts and surcharges by material, I am unable to get the list. Is it anything because of the u2018release statusu2019?  We had not checked the u2018release statusu2019 field for the tables assigned to access sequence for the condition types.
    As per the requirement business wants to view the list of u201CDiscounts and surcharges by customer/materialu201D. I think this is possible if I run the report provided by inserting values 17 or 18 but the unable to view the list. Any config settings required to activate?
    Please let me know how to view the list of condition types.
    Thanks

  • New Condition type for pricing

    Hi,
    I have a requirement wherein I want to create new condition type for add on cost of material with manaual entry . this condition is to be given in inforecord.
    How to proceed? also, this contion type to be inserted in pricing schema??

    Dear Smitha,
    You may ask what is the condition type?
    For example:
    - discounts, surcharges or tax taxes add to net price
    - delivery costs, cash discounts add to effective price
    Discounts or surcharges may be percentage based, quantity dependent, or absolute.
    Best Regards,
    ian, Wong Loke Foong

  • New condition type for freight

    hi,
    i want to create new condition type for freight like some different ways of transportation like (roadrailair), three are at a time, which user exit i want to take and where it will trigger

    hi,
    as you have to have three condition types for sales order
    ROAD - VENDOR1 - ZVE1
    RAIL - VENDOR2 - ZVE2
    ROAD - VENDOR3 - ZVE3 - into sales order.
    create a screen exit and add this in your delivery addational tab page - MANUAL ENTRY BY THE USER.
    with
    LEG 1 - ROAD - VENDOR1 - ZVE1
    LEG 2 - RAIL - VENDOR2 - ZVE2
    LEG 3 - ROAD - VENDOR3 - ZVE3
    create a Z table which captures the information for this.
    and link this table to FB70 - t.code
    and settle it individually as per FFA.
    balajia

  • Price was not picking from the Condition type for Item Category 'P'  in PO

    Hi Experts,
    I Created one condition type based on Material and WBS which price was fixed based on this
    I used the Purchase Order having Item <b>Category ‘P’ or ‘Q’</b> Price should pick from the condition type where I mapped the WBS Element and Material.
    The Net price was not picking from the Condition type Record.  Why? What should be the Problem?
    Whether my logic is correct or not?
    <u><b>
    The Scenario:</b></u> I want to fix the Material price base on each WBS Element for a Project. For each WBS Element the Price will be various for same material.
    Please help on this.
    Thanks
    Muthukumar

    Hi,
    In standard configuration you cannot set item delivery date as a pricing data.
    Maybe you shoud look at SAP enchancement - in dedicated structures you can pass additional item data (structure KOKMP).
    IMG link:
    Materials Management -> Purchasing -> Conditions -> Define Price Determination Process -> System Enhancements
    hope it helps.
    regards,
    wojciech

  • Condition types for Material

    Hi,
    I have got a scenario where the customer is going to maintain "Z" condition types for a material(1 for sales price and 1 for purchase price). I can read the correct price for this material at the Sales Order maintenance and PO maintenance using some standard function modules
    SALES_CONDITION_READ/ME_PO_PRICE_SIMULATION.
    as these condition types are maintained in the pricing schema and hence are returned in the correctly.
    I have problem when I try to read the purchasing price for this condition type(material) while creating the sales order. Here I have only the material information to read the price. Can anybody suggest how I can read the correct purchase price while creating the sales order.
    Thanks in advance.
    Best Regards
    Malthi

    HI Malthi
    I would recommend you use BAPI: <b>BAPI_SALESORDER_SIMULATE</b>. This will give you the conditions how the sales order is going to look when itz created.
    This BAPI is mainly used for:
    1. Checking ATP Qunatities
    2. Conditions/Prices
    Hope this helps.
    Kind Regards
    Eswar

  • Not possible to determine a condition type for the price in ME49

    Hi,
    While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
    Not possible to determine a condition type for the price
    Message no. 06657
    Diagnosis
    When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
    Procedure
    Contact your system administrator.
    The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
    Utsav

    Hi Utsav,
    You can refer to the following link. it might be useful to you
    RFQ price
    Thanks
    Nisha

Maybe you are looking for