Condition Type for Rebate

Hello All
I am in the process of configuring the rebate processing in our system...this is my first experience...we are on ECC7.0...I am follwing the Rebate Processing configuration guide but I have a few questions...
My requirement is the following
Order volume fully paid.... the following will apply
<$500,000  credit percentage is 3%
>500,000 and <  credit percentage is 3.75
etc....
In the condition type configuration under control data I am confused of the calculation type to use and the condition category as well...I am using condition type Material Rebate, but have also added all the condition types related to Rebate...just in case.
There will be no manual payments or partial settlements.  The rebate is due at end of year of all fully paid items.
If there is shipments that are due but will not be during the annual term and it exceeds the lets say 1,000,000 since he credit percentage would be 6% in this case....after the review of the rebate agreement then the discount for  the following year will be set at the appropriate percentage and will begin at $1.
For example if the total sales during this term are 1.2 million the the credit percentage for the following year would be 6% for all the sales the following year beginning at $1...sales for the annual term of 1.2 million would equate to a rebate of 72,000 (6%).
Also, all material that is bought the customer receives a 3% discount on top of the above.
Will I need to also include condtion type groups???
Your help is GREATLY appreciated!!!

Hi Eric and thanks for your reply ....
If the Rebate is for a certain customer and they are having multiple materials for the rebate and can have channel partners that will also be a ship to party and rebate applies....I am thinking I need to use the 0002 condition type?  Please confirm.
That is the one I have chosen so far....I do not see the rebate condtion type being being pulled through the sales order on the condition tab...it wants to keep pulling in the pricing condtion table for that rebate material....any advice as to what I may have missed....I did follow the config guide...as stated before this is my first experience wit hrebates...
I can understand the invoice showing the accruals but how would I do the scale to know if the customer reaches a certain amount their rebate percentages would be different based on the paid invoice sales...
up to 500,000  paid would be A 3 percent discount
Over 500,000 would be a 3.75 percent discount
This is also on top of the standard 3 percent discount they are given on the material as a customer discount.
Please advise....your assistance is appreciated

Similar Messages

  • SD Order Type for Rebate Management

    Hello,
    I have created Rebate Agreement. Status is coming as blank (Open).
    I want to create a Sales Order to test the rebate.
    How do I determine which Order Type to use for creating the Sales Document.
    Thank you,
    Ashish

    For doing a cycle on Rebate in SD, you need to run full end to end OTC (Order 2 Cash) cycle.
    And to that you need to various configuration, which may include modification in pricing with addition of condition type for rebate bases, accrual relevant GL account, etc.
    You can search SCN or SAP building block for rebate related configuration.
    You will get a lot of information related to that.
    Regards
    JP
    FYI
    If you don't have requirement type 24 against condition type for rebate base in your pricing procedure.
    The condition type for rebate will also display in sales order & it can be indicative to end-user who is creating a sales order. But actual accrual value for rebate is posted from billing doc.
    Best practice is rebate bases should calculated in billing, as that will reflect in GL accounts and rebate agreement.
    This thing purely based on client requirement.
    As few people like to see a tentative value for rebate at the time of creation of sales order.
    Edited by: Prakash Jyoti on Jan 5, 2012 9:57 PM

  • List of sales condition types for a material

    Hi,
    I have a material and maintained pricing and discount condition types for that material. I guess VK33 helps to view what condition types maintained for that material.
    However when I tried VK33 and selected the material from the conditions from the node on the left hand side and entered the sales org, dist. channel and material and executed after I clicked on the display icon on the condition type, Sales org, Dchl material no conditions are displayed.
    Please let me know how I can view the list of sales condition maintained for a specific material.
    Thanks.

    Hi Giri,
    Thanks for the response.
    In VK13 I should enter the condition type then I can hit condition information so that the details of all records maintained for a specific condition type will only be displayed but not for other condition types.
    In V/LD, I am getting the list only for individual prices. If I insert 17 u2013 Discounts and surcharges by customer or 18 u2013 Discounts and surcharges by material, I am unable to get the list. Is it anything because of the u2018release statusu2019?  We had not checked the u2018release statusu2019 field for the tables assigned to access sequence for the condition types.
    As per the requirement business wants to view the list of u201CDiscounts and surcharges by customer/materialu201D. I think this is possible if I run the report provided by inserting values 17 or 18 but the unable to view the list. Any config settings required to activate?
    Please let me know how to view the list of condition types.
    Thanks

  • New Condition type for pricing

    Hi,
    I have a requirement wherein I want to create new condition type for add on cost of material with manaual entry . this condition is to be given in inforecord.
    How to proceed? also, this contion type to be inserted in pricing schema??

    Dear Smitha,
    You may ask what is the condition type?
    For example:
    - discounts, surcharges or tax taxes add to net price
    - delivery costs, cash discounts add to effective price
    Discounts or surcharges may be percentage based, quantity dependent, or absolute.
    Best Regards,
    ian, Wong Loke Foong

  • New condition type for freight

    hi,
    i want to create new condition type for freight like some different ways of transportation like (roadrailair), three are at a time, which user exit i want to take and where it will trigger

    hi,
    as you have to have three condition types for sales order
    ROAD - VENDOR1 - ZVE1
    RAIL - VENDOR2 - ZVE2
    ROAD - VENDOR3 - ZVE3 - into sales order.
    create a screen exit and add this in your delivery addational tab page - MANUAL ENTRY BY THE USER.
    with
    LEG 1 - ROAD - VENDOR1 - ZVE1
    LEG 2 - RAIL - VENDOR2 - ZVE2
    LEG 3 - ROAD - VENDOR3 - ZVE3
    create a Z table which captures the information for this.
    and link this table to FB70 - t.code
    and settle it individually as per FFA.
    balajia

  • Condition types for Material

    Hi,
    I have got a scenario where the customer is going to maintain "Z" condition types for a material(1 for sales price and 1 for purchase price). I can read the correct price for this material at the Sales Order maintenance and PO maintenance using some standard function modules
    SALES_CONDITION_READ/ME_PO_PRICE_SIMULATION.
    as these condition types are maintained in the pricing schema and hence are returned in the correctly.
    I have problem when I try to read the purchasing price for this condition type(material) while creating the sales order. Here I have only the material information to read the price. Can anybody suggest how I can read the correct purchase price while creating the sales order.
    Thanks in advance.
    Best Regards
    Malthi

    HI Malthi
    I would recommend you use BAPI: <b>BAPI_SALESORDER_SIMULATE</b>. This will give you the conditions how the sales order is going to look when itz created.
    This BAPI is mainly used for:
    1. Checking ATP Qunatities
    2. Conditions/Prices
    Hope this helps.
    Kind Regards
    Eswar

  • Z condition type for surcharge need to be displayed in billing doc only.

    Hi ,
    I am having going to create condition type for surcharge, this condition type need to be diplayed only in billing doc.condition value should be calculated based weight of the material in delivery doc and scales in condition record.
    scales values are as below:
    Access key:
    sales org/dis channel/ route /sales unit(KG)
    DE10/02/DETX1/   1 Kilo   =   30 u20AC
    skales: 
    DE10/02/DETX1 /  31  Kilo =  35 u20AC 
    DE10/02/DETX1/  41 Kilo  =   40u20AC
    DE10/02/DETX1/  51  Kilo =   45u20AC
    then for 52 Kilo we have price for these item with 52 Kilo =  45 u20AC
    where exactly need to do the config and development changes for displaying in condition type in billing doc only.
    Thanks in advance.
    Regards,
    RAM

    In the Pricing Procedure , maintain requirement as 24 against the Z Condition type.Now it will reflect the value only in Billing Document.
    Best Regards,
    Ankur

  • Not possible to determine a condition type for the price in ME49

    Hi,
    While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
    Not possible to determine a condition type for the price
    Message no. 06657
    Diagnosis
    When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
    Procedure
    Contact your system administrator.
    The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
    Utsav

    Hi Utsav,
    You can refer to the following link. it might be useful to you
    RFQ price
    Thanks
    Nisha

  • Problem with multiple condition type for VAT &CST

    Hi,Gurus,
    pl. suggest  the procedure for the following problem.we configured  seperate  pricing procedures for our product material and scrap material.We have configured same condition types for VAT(ie.condition type:ZVAT) and CST(cond type:ZCST), in both pricing procedures. Now We want to maintain  seperate condition types for VAT and CST for pricing procedure for Product material and Scrap material. I have created two new condition types for scrap sales ZSCT- cst for scrap and ZSVT-vat for scrap by copying the same from existing conditions ZCST & ZVAT, and the same is included in the scrap pricing procedure. And also maintained OB40,OBCN,OVK1,OVK3,OVK4, FTXP,FV11 and VK11.
    now I am facing the following problems.
    1. while creating the Material master & customer master, in tax category sub screen all conditions i.e. conditions defined for  product material( ZCST,ZVAT) and defined for scrap material (ZSCT, ZSVT) displaying and these are compulsory fields.
    2. While creating the sale order for scrap material, system is considering the TAX classes from ZVAT/ ZCST (defined for product material) and taking the condition value from the condition type ZSVT/ ZSCT with the TAX class values of  ZVAT/ZCST.
    Now I would like to know is there any procedure  to assign the Material type and Customer  Account group to Tax category.
    Thanks & Regards
    sam

    Hello Sam,
    The Access Sequence Assigned to your New Condition types ie, ZSCT and ZSVT are same as the Previous Condition type ZVAT and ZCST.
    After Adding new condition type in the Tax category in the Masters you have to take care of the Sequence of the Condition type.
    If ZSCT and ZSVT is on the 3rd and 4th number in the masters the Condition table you are using in the access sequence should have fields  Taxclassification3-Customer and taxclassification3- material. For ZSCT
    Likewise Taxclassification4-Customer and taxclassification4- material. For ZSVT
    Please add New Condition table in the access sequence with the required Field
    And next when you are maintaining the condition record for say ZSCT you will have to maintain condition record for the condition table which has Taxclassification3-Customer and taxclassification3.
    In Document the values will be flown correctly after changing this.
    Hope I have Solved your Query.
    If any Doubt please revert.
    Regards,
    Rohit Dongre

  • Condition types for works tax, SDT,MANDI TAX

    Hi All,
              are there any condition types for the following:
    Mandi Tax,
    other taxes(any other taxes)
    state development taxes,
    works tax
    entry tax
    it is required to create condition types and put in pricing schema in po or these condition types are defined in tax code and are copied in pricing procedure.
    thanks and regards

    thanks for giving your valuable time,
    We are on ECC 6.0, and these conditions are not appearing in the condition table. I could not go thru these conditions. I referred the SAP NOTE NO 9552289, validity since 8.1.2007 where in the attachment of TAXINN with screen shot is there.
    Further clarification
    In the forum it was mentioned JVRD - VAT Non deductible and JVCS - CST deductible, is it a typing error. My writing is not for pointing you as wrong, but for taking the understanding.
    I appreciate your knowledge and great understanding on subject.
    regards

  • Profit Center on Condition Types for Taxes

    We have a billing document whose pricing procedure included two condition types for billing.  A single material was delivered and billed but the two line items for the taxes were posted to different profit centers.  Where did the difference could have come from?

    Hi
    Tell me in which version you are in?. What are the account assignments for those condition types?. Do you have multiple sales accounts for that entry?.
    Jayaram

  • Condition types for import pricing

    hi,
         the conditions types for import pricing procedure are not appearing.
    please suggest all the notes from where i can take reference and create the condition types for import process.
    please also suggest what are they?
    with regards

    Hi anitha,
    In case of import purchase. u have to configure the conditions in pricing procedure.  The condition types are as follows:
    1)jcdb               basic customs
    2)jcv1               CVD
    3) jec1               ECS on CVD
    4)jed1              cess on customs
    5) j1cv                secess on cvd
    6) jsdb               secess on customs
    Go to the master note no 1032295 for recent budget changes.
    award points if found useful
    chintu

  • Condition types for Insurance and Duties - Export sales

    Hi Friends,
    Please let me know the condition types i can make use of for capturing the Insurance and duties paid during export salesand also the condition type for capturing the commission.
    Thanks
    Ivy

    Dear ivy
    You can create zee condition types on your own and maintain the required datas.  I am just give you one example for insurance.
    Go to V/06, copy some standard discount condition type and rename it as ZEIN and maintain the following:-
    Cond. class:::::::::::::::: A
    Calculat.type::::::::::::::: A
    Cond.category::::::::::::::C
    Rounding rule::::::::::::::::Commercial
    Plus/minus::::::::::::::::::::blank
    Manual entries:::::::::::::::D
    Amount/percent::::::::::::::X
    Value::::::::::::::::::::::::::::X
    In V/07, you can maintain the following tables
    033:::::::::Incoterms
    307::::::::Customer with Release Status
    So in VK11, either you can maintain the insurance percentage for Incoterm or Customer, so that whenever you generate sales order with multiple line items, this condition will automatically bifurcate the insurance percentage.  Also the most important is that in your pricing procedure, against this condition type, you have to assign EIN as Account Key.
    thanks
    G. Lakshmipathi

  • Pricing: Condition type for advance "ZADV" can be enterted twice

    Hello,
    I have defined condition type for advance as ZADV in pricing procedure.
    Issue: Now teh end user is able to enter the advance conditype types "ZADV"  in the sales order, is it any way possible that it should not allow the condition type to be entered twice.
    Regards
    Suvin.S

    HI,
    Issue: Now teh end user is able to enter the advance conditype types "ZADV" in the sales order, is it any way possible that it should not allow the condition type to be entered twice.
    1*.Suppose Condition type ZADV having Condition Class "Discount or Surcharge " system will allow to enter manually second time also*
    2. Suppose Condition Type ZADV is mandatory to few customer and also customers then do the some changes in the condition Type under the Tab "Changes which Can be made " we can find out the Manual Entries fields in that try to mentioned "D      - Not possible to process manually "
    Regards,
    Prasanna
    Edited by: prasanna_sap on Sep 6, 2011 8:35 AM

  • Wrong calculation for condition type for misc. provision in service PO

    Hi Gurus,
    In service PO line item, we have maintained customised condition type for misc provision. this is % based on net price. It has been assigned account key and accrual key. It's manual. Logically, it should calculate the value based on the total of the net values of all service lines and post a single entry for all concerned service lines. What system is actually doing, it calculates the value correctly for total of net values of service lines in that PO line item but post it to the account as many number of times as the number of service lines in that line item.
    This is when service based IV is active for the PO line item. If I deactivate this, then it post the account once only which is ok.
    Please explain this behaviour. Also, I want to activate service based IV, what should I do to this condition type. Is there any condtion base formula or condtion value formual to be assigned in the pricing procedure?
    Thanks in advance,
    Sudhir Dahake

    Hi,
    Check if some user exit/ routine is written for the condition type.
    Check user exit RV60AFZZ, RV60AFZA, RV60AFZB,RV60AFZC for some code.
    If it is a manual condition check COPY CONTROLS or if it is automatic check condition records from which it is calculated based on qty, price, material type, etc.
    Regards,
    Amit

Maybe you are looking for