Condition Type is not copying from contract to sales order

Dear All,
The value the i am giving in the sales contract is not copying into sales order. Sytem again asking to enter the value.Is there any setting to be done forthat.
Regards,
Suresh Yadav.

Hi,
If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
Please check in the  Contract whether the vales derived from Condition records are entered manually.
If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
Please maintain the CONDITION RECORDS and check whether they have copied or not
Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s  D
Please check the above settings and let forum know the feedback.
regards,
santosh

Similar Messages

  • Net weight of the material is not copying from contract to sales order

    net weight of the material is not copying from contract to sales order?
    plz help me

    Hi,
    If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
    Please check in the  Contract whether the vales derived from Condition records are entered manually.
    If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
    Please maintain the CONDITION RECORDS and check whether they have copied or not
    Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s  D
    Please check the above settings and let forum know the feedback.
    regards,
    santosh

  • PO number  not copied from Contract to Sales order

    Hi Gurus,
    when i try to create a sales order w.r.t a contract the Po number is not copying from cintract to sales order.
    also the PO item is not copying from contract to sales orde.
    Could u tell me the reason.
    Cheers,
    Sumith

    Hi Sumith,
    I'm not sure though but try this one this might jus help.
    Go to VTAA,
    select the target & Source doc type.
    Go to header and check the COMPLETE REFERENCE CHECK BOX,
    Which says it copies the whole of the reference doc from the
    source doc to the target doc.
    I jus hope this will sole your problem.
    Cheers!!
    Nitin

  • Price not copying from contract to maintenance order in IW31

    Hi Gurus,
    I am facing issue in one of the client where Price is not copying from contract to maintenance order in IW31. But while doing the same in another client it is working fine.
    I did not find the settings for this change. Can any one please help me for which settings price is not copying to IW31 transaction?
    Thanks in advance!
    Best regards,
    Karun Kumar

    hi
    i think if you have assinged the contract the servies will not copied ,for this in the external tab select the serice selectionbutton ,here specify the agreement from their select the serives you required
    regards
    thyagarajan

  • Discount pricing is not copied from Qoutation to Sales order.

    Hi All,
    Issue:
    Discount pricing is not copied from Qoutation to Sales order.
    Please suggest the correct copy control/Routine programs which i can check to proceed furthur.
    Points will be rewarded.
    Regards,
    neslin.

    kindly check in the price determination  whether you have assigned the quotation document pricing type ? simmilar like the sales order type you have assigned ?

  • Pricing not copied from qoutation to Sales Order.

    Hi All,
    Issue:
    Discount pricing is not copied from Qoutation to Sales order.
    Please suggest the correct copy control/Routine programs which i can check to proceed furthur.
    Points will be rewarded.
    Regards,
    neslin.

    kindly check in the price determination  whether you have assigned the quotation document pricing type ? simmilar like the sales order type you have assigned ?

  • VKGRP should copy from contract to sales Order

    Hi Guru's
    I have a problem related with copy control from contract ot sales order. sales group should copy from contract to sales Order while Sales order reffers to customer Master. In contract sales group comes from Customer Master, after saving the contract if i change the sales Group and create sales order with reference to contract. sales group doesn't get updated from the contract. system refers customer master only.
    Any suggestions
    thanks,

    Hi,
    I see that you can address this in following ways.
    1. copy control between Sales order - Contract - header level routine.  Here you may be able to influence the copy of the customer group details.
    2. You can use the user exit which will trigger during Contract creation ( Move field to VBAK) or you can think of using save_prepare user exit.
    Thanks & Regards,
    CLN

  • Item number to be regenerated when copying from contract to sales order

    Hi,
    I am copying items from contract to sales order, say there are 10 items in contract. I copy all items leaving 5th & 7th item in contract. The numbers in sales order has to be in sequence (regenerated leaving the 5th & 7th line item) rather than it is copying the line item number as in the contract. Can any one kindly suggest me how to handle this in sales order.
    Thanks
    Ghanesh

    Hi,
    In VTAA
    QT to OR at header level
    REMOVE TICKMARK OF COPY ITEM NUMBER
    Then system will genrate new item numbers in targer document.
    Kapil

  • Service details are not copying from contract to Maint.Order

    Dear Experts,
    I was doing a service contract cycle, with the following steps.
    1. Created a Service contract, in T. Code ME31K.
    2. Given all the details in the Header data of the Contract.
    3. Mentioned the, Item category as D (Service), Account Assignment as F (Order), short text, Target Quantity, Material group, Plant and Storage Location in the Item Overview screen.
    4. Given the Service Number and Quantity, Gross Price, Cost Center and GL Account.
    5. Saved the Contract.
    6. After released the Contract in T. Code ME35K.
    7. Then created a Maintenance Order through T. Code IW31.
    8. In the Operation Overview screen of the Maintenance Order, the control key is given as PM03 and clicked on External button of the Maintenance Order.
    9. In the External Processing Operation screen the Contract Number and line Item is mentioned in the Agreement Field.
    10. System given a message Data copied from contract.
    11. All the data copied excepting the Service details of the Contract.
    Here the Service Number and its details which were mentioned in the Service specifications of the Contract are not getting copied from the Contract.
    What could be the reason for that? Did I perform the transaction properly?
    I have searched the forum earlier for the same but could not get any required information.
    Can any one help me out on this??
    Thanks and Regards,
    Praveen
    Edited by: b praveen savan on Jan 31, 2008 2:33 PM

    Select the services from the service selection button, then click on current spec, all the services which are under contract will be displayed. select your required services or copy all services.(Click on adopt services)

  • Letter of Credit not copying from Quotation to Sales order

    Hello,
    I have attached a LC to a Quotation. When i am making an order with reference to the Quotation, the LC is not copying from Quotation to the Sales order. Kindly help.
    Regards,
    Shahzad

    Hi,
    Did you want to say that you have maintain some text in quotation and that text is not copying to the sales order some thing like that?
    So I suggest you to check your setting by going to the following Tcodes.
    VOTXN over there you can define the text types.
    And you have to assign you text determination procedure to the order also.
    If you want that text to be copied to the billing also then assign the procedure to the billing doc.
    If you have assigned properly your procedure then it will copy the document.
    Regards
    Raj.

  • Exchange Rate is copied from Contract to sales order

    Dear SD Guru,
    Good Day!
    I have an issue with the currency. The sales order picks up the exchange rate in the contract and it might not be correct.
    The contract was created a year ago and the sales order is still referring to the old exchange rate because the pricing date in the sales order is copied from contract.
    Is there any way to not copy the pricing date over to sales order and let the sales order picks up the currency table OB08?
    Thanks,
    CC

    Hi There,
    What i suggest is to create one routine at Item level in VOFM and maintain that routine in VTAA copy control at item level.
    In sales order the details are copying based on your copy control settings. Please also ensure is there any existing routine for determining the new values from sales order.
    Thanks,
    Raja

  • PO no.& PO dt. to be copied from contract to sales order at header level??

    Hi,
    I have a requirement, Purchase Order number & date has to be copied to the sales order (header fields below the SP & SH fields) when i create a sales order with reference to a contract. Can you tell which routine to be used in copy control??
    Thanks
    Ghanesh
    Edited by: Ghanesh Visu on Feb 16, 2010 9:17 AM

    Hi,
    I as far as my understanding you have to create new routine or copy from existing and modify that
    and maintain condition P.O & Date should not be change.
    Kapil

  • Weight is not copying from Quotation to Sales order

    Hi Guru,
    I have made quotation and given weight and volume, and i created S.O with refernce to Quoattion, now the weight and volume is missing in sales order,
    My cleint requirements is it should copy and it should be open feild so that they can change here...
    wat all settings is required in copy control....
    Thanks in advance...
    Regards
    RAmakrishna.P

    Hi,
    You will not get this requirment in std settings, you have to do  some abap coding wiyh the help of abapes  to get you r requirment from quation,
    Regards,
    Caprin

  • Sales office and sales group are not copied from quotation to sales order

    Hi All,
    I have maintained sales office and sales group in quotation maually at header level.while  coping to sales order sales office and sales group are missing.
    Please let me know what would be reason for missing those twoand whether i should check anything in copy controls.
    Regards
    Mohan

    As its a standard functionality to have the Sales Group & Sales Office from Quotation to Order. But in your case, check the Copy Control settings at Header Level .
    DataT 051 General header data       Copying requirements 001 Header-same customer
    DataT 101 Header business data
    DataT 001 Partner header
    In case , they are also same, then check if any Logic is added in the Existing Routine.
    Best Regards,
    Ankur

  • Copy PO Number from contract to sales order

    Hi,
    My clients requirement is that when i create sales order with reference to contract the PO Number should be copied from contract to sales order other wise we have to enter PO Number every time while creating the sales order.
    Please guide me.

    Hi
    Small change in the program will copy the PO number from Contract to sales order.In case need take help of ABAPer
    Data which is not copied
      LOCAL: VBKD-FKDAT.
      LOCAL: VBKD-FPLNR.
      LOCAL: VBKD-WKWAE.
      LOCAL: VBKD-WKKUR.
      LOCAL: VBKD-DELCO.
      LOCAL: VBKD-BSTKD.
      LOCAL: VBKD-ABSSC.
      LOCAL: VBKD-BSTDK.
    In your data declaration, you have
    LOCAL: VBKD-BSTDK
    Please comment out this line and your purchase order should be copied over. You might also have to comment out some of the other fields which are declared locally if you wish to copy them as well.
    Ramesh

Maybe you are looking for