Condition Type JSRT not picking Condition Base Value in Pricing Procedure

Hi Friends,
In a procedure System is not picking condition base value for condition type JSRT. I have checked the tax procedure and found alternative Cal Type is 17 and is working fine for Domestic vendors.
Friends i need your help in sorting out this issue. Pls suggest what I can check in order to sort out this issue.
Rgds, Krishan Raheja

Hello!
In TAXINN the base value for the condition JSRT is picked up from step 100.
I suggest that you change the "From" value to 100 instead of whatever you may be using
Then test the transaction once again.This will not affect your normal service tax calculation either. So please make this change & try using S1 for planned delivery cost.
Hope this helps !
Cheers!
Plauto
Edited by: Plauto Abreu on Feb 11, 2011 9:03 PM

Similar Messages

  • Condition type JEXP not picking in sales order

    hi
    i was working with all configuration of TAXINN
    i am facing with a problem
    when i am running mine sales order i am not able to see condition type JEXP(BED) , JEAP (AED)
    can i now where i am gng wrong
    whereas i can see all the other condition in sales order
    but when i enter it manually JEXP it is taking but in again in billing it is not showing
    can u plz help me
    Regards
    Vini

    Dear Vini,
    Please Check the configuration settings through IMG path
    SPRO>IMG>Logistics general-->Tax on Goods movements >India>Basic settings-->Determination of Excise Duty -->Maintain Excise defaults here you check JEXP condition type is maintaining for A/R BED or not if not maintain then try.
    Also check the condition record maintanance for the JEXP condition type through VK12 transaction.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Oct 1, 2008 6:51 AM

  • How to display modified condition base value in Pricing Procedure?

    Hi everyone:
    I used a formula to change the condition base value (via the VOFM transaction) of various price conditions that are assigned to the same material. In this way, I can distribute the total quantity of the item line in smaller quantities for each price condition.
    Now the problem is that in the conditions tab of the sales order, I can not see the Condition Base Value of each Price Condition, and that's a little confusing.
    Did Anyone know's a way to show the modified Condition Base Value in the Pricing Procedure of the Condition Tab?
    Thanks a lot,
    Ginno Giuffra

    Thanks JJ:
    Yes,  I can found the modified base value in the condition details, but I still need to show it in the Pricing Procedure scheme.
    It is curious that the table options does not allow you to add that field to the escheme.
    Does anyone knows a user exit wich can modifye the table?
    Thanks again,
    Ginno Giuffra

  • Expense condition type does not transfer to CO-PA

    Dear guru,
    My client would like to post expense (ex. promotion expense) via sales order, then SD consultant create condition type and assign expense G/L to this condition type and I assign this condition type to value field via tcode KE4I. When we create sales order and use this condition type, value of this condition type is not transfered to the value field. I set cost element with category '1'. I know standard is not support for this situation. Please kindly to suggest me for solve the problem 'How do expense value of condition type from sales order will be transfered to CO-PA', example user exit or others.
    Thanks in advance.
    Regards,
    Nattakarn.

    Hi
    Changing the cost element category to 12 can be done only at the begining of the fiscal year as follows
    But if promotional expenses is already created as a cost element with say category 1, now if you want too change it you might get an error KS134 Field change CElem Category is not possible (transaction data already exists)
    Hence use TCode KA02, Edit->Analysis Period, Click other analysis period provide from begining of fiscal year to 12/31/9999.
    You might have to create a new GL Account cost element if you want to go ahead with the changes in middle of the fiscal year
    Regards,
    Suraj

  • Used of 362 & 363 Alternative formula for condition base value in Define Procedures (Tcode obyz)

    Dear
             what is the  used of 362 & 363 Alternative formula for condition base value in Define Procedures (Tcode obyz)

    362 is used for to pick base value to BASB condition type from MM pricing procedure
    363 is used for all sales tax {VAT (Inventory or set -off) & CST}.
    Tax Calculation on Freight - Different Scenarios
    Please  go through this  link  and  you will know  very well a bout  362 and  363  usage

  • Additional VAT condition type is not flowing to PO

    Dear All,
                An additional tax of 1 % is levied in State of gujurat and for this we can take the credit . It behaves exactly like VAT like it calculates its value as 1% of base amount and excise duty levied on it . But this condition is not available in standard TAXINN procedure . So we created a new procedure copying from TAXINN .We created a condition type copying from standard condition type JVRD that is for VAT on which we take credit .Then we assign this condition type to tax procedure immediately below condition type JVRD and it should calculate the value in the same way as that of VAT .Then we assigned this procedure to India , assigned all the condition types in CIN config and maintained default condition types for this procedure copying from TAXINN .
                But while we are creating a PO after that ,this additional tax condition type is not flowing in it .
    Can anybody let me know where is the missing link in this customisation .
    Regards
    Abhijit Das

    Hi AP ,
             The condition type is Valid from : Todays Date and valid to 31.12.9999 . Is there any problem with this ?
    Abhijit

  • Condition type is not get in the PO output

    Hi,
    I have defined a new condition type ZRA0- Discount as discount charges .
    The condition type is not getting print out in PO copy.
    The vendor wants to see in the PO copy.
    Pls suggest how to configure
    Regards
    Sp

    Hi,
    If i understood your problem, you would like to print the discount in PO print copy along with price.ok.
    then check with your Abaper,he can fetch the Discount value for that perticular condition type(ZRA0) & print in the PO copy.Its depends on the print programme to get the data from the document to the print out.
    Regds

  • ZPRS- Cost(data source H) condition type is not visible in CRM sales order

    Hi Colleagues,
    I created a sales order in ERP. In the sales order the condition type ZPRS- Cost(data source H) is available. I downloaded the this sales order to CRM i can able to see the ZPRS condition type in sales order.
    But when i create a new sales order with the same data (BP, Material,Sales organization) the condition ZPRS is not visible in the sales order. When i checked the PRC_TRACE it is showing the error as "Condition with external datasource has not be found".
    Can any body help me in this issue.
    Tanks and Best Regards,
    Rajeswari

    Hi Michael ,
    Thank you very much for your answer. I just require one more confirmation from you.
    Could you please confirm If we post a returns document in CRM system directly the "ZPRS or VPRS - Cost" Condition type will not appear in the return document condition types.
    Untill and unless it is a billing document in CRM system the "cost" condtion wont appear rt?
    Could you please confirm it.
    Thanks in advance for your help.
    Best Regards,
    Rajeswari

  • Condition type is not reflecting in sales orders

    hi,
    i have created two condition type like jser (service tax) and other one is jste(service tax +cess) but in pricing procedure jfact  it is reflecting but while making contract order these two condition type is not accessing.
    please help in this connection.

    Hi,
    After Creating the CONDITION TYPES you need to assign the condition types in the PRICING PROCEDURE
    goto the
    SPRO->FINANCIALACCOUNTING>FINANCIAL ACCONTING& GLOBAL SETTINGS>TAX ON SALES /PURCHASE>BASIC SETTINGS--->CHECK CALCULATION PROCEDURE.
    Here select you procedure and assign the CONDITION TYPE
    regards,
    santosh

  • How to set required for group of condition type in the same condition class

    Hello,
              we have a group of condition type with the same condition class B, the last one have been set, and all of others will be inactive.
    but we don't set any required for all the condition types in pricing control, so if user don't set any of them, the sales order or billing is still saved. that is a risk.How can i fix it? Thanks.
    Sophie

    Hello,
      incompletion log is not available in invoices.
    You have different options:
    - activate a validation in FI when the Billing document is released into accounting,  so that te release into accounting is not allowed if the invoice amount is zero;
    - define a subtotal in the pricing procedure as sum of the pricing conditions of your group, then develop a custom routine to be assigned in the formula "CalType" (field T683S-KOFRM) where an error should be raised if the amount of the subtotal is zero (use as an example formula 48);
    Best regards,
    Andrea

  • How to extract values from pricing procedure for conditions in CRM Billing?

    I have a number of conditions in the pricing procedure in CRM Billing that I would like to extract to SAP BW. How can this be done?
    Is there a standard extractor for CRM Billing similar to the SD Billing extractor "Extraction of SD Billing Conditions" (2LIS_13_VDKON)?
    If there is no standard extractor, is there another way to extract the conditions and the related values?
    I am using the standard CRM Billing Extractor 0BEA_CRMB already, so maybe an append could solve my problem. How can this be done? In what CRM-tables can I find the values from pricing procedure for conditions in CRM Billing?

    you may want to post that last question in a CRM forum... in ECC it would be table KONV

  • Essbase members not picking up data values

    Gurus,
    I have some members in my JOB CODE hierarchies, such as 100, 200, 300 ETC.
    Now I have added 100A, 200A, etc to the hierarchy. 100A is the sibling of 100, 200A is the sibling of 200, so forth.
    Now, 100A, 200A, etc (the ones with the alphabet A is not picking up the values/percentages, while doing a pushdown.
    Is it because of the ALPHANUMERIC member names?
    Essbase allows such names right? or Do I need to change any setting/properties, etc like that?
    Thanks

    the answer is it depends. It is not Essbase itself that would not allow those member names as all member names are really text even if they look numeric.  The problem could be in your script to "Push down" data. it could be doing some match based on UDA or member format. without seeing the pushdown script, I can't determine what could be your issue. It could even be a block creation issue, but who knows.

  • Order type is not picking while converison Plnd to process order

    Dear Dudes,
    i have maintained production scheduling profile in all material masters in which order type is specified. while converting planned order to process order order type is not picking.
    thanks in advance.

    Robert,
    Since you are using same order type for both MTS & MTO, you can define this order type "PI01" in the MRP plant parameters using transaction OPPQ in the Conversion of Planned order section.
    I am not sure, why production scheduling profile is not working for you, hope you are using the Production scheduling profile configured using CORY transaction check this part alone.
    Regards,
    Prasobh

  • About hide special condition type in sales order condition screen

    Hi all,
        I have such requirement:
        Customer want to hide some condition type in sales order condition screen.
        I have tried the authrization object :V_KOND_VEA  but it only controll the master data level
        and the special still show on the condition table.
        I have also find any user exit in SD module:
        USEREXIT_FIELD_MODIFICATION (module pool SAPMV61A, program MV61AFZA)
        But it looks like a system modification, and need the modification key.
        So, is there any solution such as enhancement or configuration to meet this requirement?
    Many , thanks.

    Check this thread where similar requirement was discussed
    [Condition Type |Condition Type]
    thanks
    G. Lakshmipathi

  • How to copy total freight value from pricing procedure to TAXINN procedure

    Dear Experts,
    I want to copy the total freight value from pricing procedure to TAXINN procedure , i think i have to use SUBROUTINE for that but can you guide me what is the routine number and in which coloum i i have to use e.g. requirement, or ALt CAl Typ, or cond Base value ???
    e.g.
    freight condition type (QTY , freight) will enter manually e.g. 100 Rs and material qty 4 so total freight is 400 Rs this value (400 Rs) i want to copy from Pricing procedure to TAXINN
    How can achieve this ????
    Thanks and regards
    Hanumant Nimbalkar

    Hello,
    If you want to calculate VAT above Freight, then in Pricing procedure make the Sub total as blank for Freight confition types.
    And in Tax procedure, make the condition base value as 363 for VAT condition type.
    Make the tax code for 4 % VAT and u'll get the desired result.
    This will solve ur purpose.
    Regards
    Prabhjot Singh Nayyar

Maybe you are looking for