Condition type missing

Hi all,
2 customized condition type ZR00, ZM00 on which the main pricing is executed in PP, can create condition records the pricing and everthing is working fine, but when i go to transcation V/LD and try to execute an pricing report, those 2 customized condition type missing, was wondering what could be the reason ?
regards

Hello,
this is SAP standard behaviour and it makes sence.
If you customized a condition as manually, then you must be entered the condition type in the order and then you can maintain these condition in the order.
It is not possible to set a condition as manually and then the condition type is with a line in the order with value zero and then you can entered only the value in the order.
Hope this will help.
regards
Claudia

Similar Messages

Urgently need solution for Pricing Error: Mandatory condition type missing

Hello, All
I am working on CRM 5.0 service module and I am facing a problem while creating a service order.
When I enter the product in the service order it gives me an error
"pricing error: mandatory condition type Z### is missing" even though I maintained the customer pricing procedure, the pricing procedure determination, and the condition record. The error shows that the pricing procedure is determined as the error shows the mandatory condition is determined but what I think is that it cant find the condition record.
I already maintained the condition table and the condition record in the product master data but it does not pick the price, kindly help. Deserving points will be rewarded.
Regards
Jacopo François

Hi,
Open u r transaction which u r getting the error, Double click on product u ll get the item level info, Select condition there u click on create icon, there u can define the condition.
OR
While creating a sold to party check whether u r entered a sales area data properly or not.
Hope it helps u
Gentila

TAXINN Procedure and excise duty condition type Missing

Hi,
We are implementing CIn and found that standard condition based procedure TAXINN and Condition type pertaining to Excise duties (JEXP,JCEP,JECP) and Central sales tax (JCST) are missing.But TAXINJ procedure is available.
We need to know whether Basis need to activate some BC sets or any note need to be applied.
Please guide

Hi
As Suggested, you can go ahead and add those missing codition types in TAXINN. This is nothing new as I did faced the same situation only thing was for me it was Version 4.6c and in consultation with FICO consultant we infact first created and then added those condition.
The best example i can share is we didn't have anything like Higer Secondary Education Cess for excise duties @ 1 % till 2007-08 financial year , If I am correct.
Since the component was incorporated in 2007-08 budget session so the condition type for the same was missing (to add this additional @ 1 % ) , and we first created a condition type and then added this to the pricing procedure to solve the scenario.
Thanks
RB

Few condition types missing in Outline agreements

Hi,
In PO, I am getting all conditions but in outline agreements (either contract or sch.agreement) few are missing. How to get all conditions in Outline agreements?
Regards,
Sattuj

dear sattuj
check inforecord tab , wether it is getting field or free , if it is rffering any inforecord than make sure that info record have all the condition type ....
reward points if helpfu
thanks and regards
ravikant dewangan

Some Condition types missing during extraction from 2LIS_11_VAKON

Hi,
I am extracting conditions data to BI from ECC through 2LIS_11_VAKON. This datasource uses the fields from table KOMV. The Field KSCHL (Condition type) is also being taken from KOMV structure.
My problem is some condition types are missing during extraction. Say, for example, for a Document condition i have 22 Condition types in KONV table but when i extract the data to BI, nearly 7 conditions are missing, i am getting only 15 condition types for the same document condition in BI.
Why is this happening? I dont have any filters set. Moreover, this is happening in the Datasource level itself.
Please advice. Any help on this is highly appreciated.
Regards,
Murali

Hi Murali,
try to have the manual check with set of data..there must be some mistaken in And and OR logic.
Thanks,
Deepak

Condition type missing in Sales order after client copy

Hi All,
I am technical person and looking for administration part. I did client copy from my Prod to Dev sytem by using export import method. After doing this I am able to view all sales orders but the condition types in pricing element table are missing in Dev client, but the in same sales order in prod, the contion types are exist.
My functional consultant saying its because of client copy but as per my knowledge the client copy has special query to copy the content so this could be side effect of the cleint copy.
Can anybody experienced the same problem before. If yes. please provide me the solution.
Regards,
Ramesh.

Dear Ramesh,
I checked the note,as i said certain tables which is copied might not be available in the dev.As staed in the note also they are pointing on the access sequence.Say for example one condition type you copied from PRD will have an *** seq.But the same *** seq will be in a different order in DEV.As this tables and feilds are client independent.So ask your functional consultant to check that.
As i told you we have faced the same issue but in a different area.Then when i changed the seq it worked.
Please check and revert.
Venugopal

MWST condition type missing

Hi all,
i have taken the standard pricing provedur to my client.
i inlcuded the condition type MWST in that.
also i maintained the condition record.
but i am getting the like " The condition type MWST is missing" while i creating the sales order?
so can any one tell me the solution?

Hi,
First check whether plant is assign to line item or not.
second goto the line item for which this error is coming -> double click on it -> goto condition tab -> click analysis tab at the bottom of screen -> goto Condition type MWST -> Double click on it .
Check all the data is maintained for the condition to populate or not .
u urself will find the reason .
If condition record is not there please create in VK11.
Hope this help.

MWST condition type missing in contract creation,VA41

Hi, got a problem here during contract creation. I can't get the MWST show up in the contract condition tab. Analysis result :
010 Access not made (requirement not fulfilled)
Error Message : Pricing error: Mandatory condition MWST is missing
Things I have done :
a) checked pricing procedure V/08
b) created condition records VK11
c) checked customer tax classification : Liable for taxes
d) checked material tax data : Full tax
e) ???
what else did I miss out?
Thanks
Andy

Option 1: If you do not want MWST condition as mandatory, then remove the check from check box in the pricing procedure (T.Code: V/08). MWST is tax condition & Tax condition are normally not mandatory, as it may vary according to Business Requirement.
Option 2: <b>"010 Access not made (requirement not fulfilled)"</b>: Check the access sequence maintained for Condition Type MWST (T.Code": V/06). Next, Check the Access Sequence & the access 010 assigned to it. (T.Code:V/07). Check whether Accesses & fields are assigned correctly.
Option 3: Instead of maintaining condition record for access 010, maintain for different combination & check the result. Even in my case, once the access with reference to tax classification did not give desired result, but was achieved bu maintaining another combination.
Regards,
Rajesh Banka
Reward points if helpful.

Entry for condition type missing in table PRCC_COND_CT

Hi guys,
I got this error message in my BDoc.
It ask me to
"Fill the table PRCC_COND_CT bu using a Customizing download, and then restart the rolled back block in the inbound queue."
I am not too sure what is a customizing download.
Can you guys help me out?
Cheers
Lawrence

Hi,
Firstly please apply the note 1003793 and then run the customizing load again and check for errors.
then if you get any errors like
"It is not possible to change client-independent Customizing objects Message no. CND_MAP204 "
Then log into SCC4 transaction and then make the following change
"changes to repository and cross-client customizing allowed" under Cross-Client Object Changes.
Thanks,
Abishek

Condition type is missing in Pricing Procedure determination

Hi experts,
We have a problem with Pricing Condition type in CRM.
We have created a Transction in CRM as a follow up for the Transaction which is replicated from ECC to CRM the pricing procedure has been determined. But the net value is "0".
when I checked in the conditions tab page "the condition type is missing" I checked Pricing Procedure the condition type is very much there. Then I checked for access sequence for that Condition type "Access sequence is also maintained.
Then I checked copy controls for the Source and Target Item categories, for copy conditions the indicator is set up as "copy conditions,Redetermine taxes" then I changed it to "Copy all conditions".
But still it is not happening.
Can any please help me in this regard? Did I miss any configuration?
Any help will be rewarded with points.
Regards,
Frederick.

Hi Fredrick,
This requirement must be assigned in your Pricing Procedure for condition type VKPO.
The system first checks whether the requirement is fulfilled and than only execute that condition type.
Requirements are nothing but Java Routines, which check for some condition before executing a condition type.
For this Go to path
IMG: CRM-> Basic Functions-> Pricing-> Define settings for Pricing-> Create Pricing Procedure.
Choose your pricing procedure here. Here for the condition type VKPO requirement 41 must be assigned in column REQ. The requirements are coded in JAVA in SAP CRM.
If this Pricing Procedure has been downloaded from SAP R/3, u can check in R/3 itself (Tcode: V/08) what the requirement is meant for, but choosing F1 and than the path for customizing.
Regards,
Shalini Chauhan
Edited by: Shalini Chauhan on Apr 29, 2008 2:43 PM

Block Invoice creation for missing condition type

Hi,
We need to put a chek on the Invoice process, wherein if particular condition type is missing in the relation to sales order, than the Invoice should not get created.
For example-
If Order A - has condition type PR00 which gets fecthed from the condition record (VK11)
And while creating Invoice for the Order A, if someone has deleted the condition record , the invoice gets created without condition type PR00.
Now at this step a block has to be placed which can block the invoice from being created if PR00 is missing.
Please let me know what will be the best appraoch of IMPLEMENTING such check and how to do that.
Regards,
Gaurav

Hi Gaurav,
first if some deletes the condition record for a paricular condtion record,then ask ur users to uopdate the prices by goin to the condition screen.
second create a pricing procedure determination for your billing type in t code ovkk
and in that pricing procedure just maintain the settings as per mentioned by Mr.Lakshmipathy.
Revert if helpful
l
Mohit Singh

Provision account key missing for condition type FRA1 in schema ZIMPOR

Hi,
While maintaining the condition value in PO, the below message displayed.
"Provision account key missing for condition type FRA1 in schema ZIMPOR"
Thanks and regards
Murugesan

Go to
Spro>MM>Pur>Conditions>Define Price Determination Process>Define Calculation Schema
here select ZIMP and click control data
in that maintain "Account key" for FRA1 cond type in the Account key Column..
(Second column from right side)

Condition type JTX1 missing

Hi,
I'm practicing on home pc IDES 4.7. I have done copy client from 000 to 800 to use CIN in IDES, and now I can see the calulation procedure TAXINJ assigned to country IN which was not there before coping the client.
I have done the customization for CIN ( yet to test ) also. But now Im getting one error while creating CMR & MMR i.e. tax condition JTX1 not defined. I can see the condition default in CMR & MMR but not classification value and while doing so in "Define tax determination rules" it is giving the error that "Condition type JTX1 is not defined for taxes" although I can see it assigned to country IN but if u click enter it will throw the error.
So my query is that how come these conditions are missing as these are default condition type and can we create these conditions manually & if yes which access sequence should we assign to it and what are other settings for it ?
Plz help me out I'm a SAP learner and unable to create CMR & MMR bcoz of this error.

Hi Lakshmipathi,
Thanks for your answer.
I have taken a look to note you mentioned but it is related to Resource Related Down Payments customizing, which is not our actual requirement.
The note mentions though condition type EK01 for the purpose I am commenting: "...when the system processes a final invoice date, it determines condition type EK01 as the active price condition, thereby billing the actual costs".
Condition Type is in our pricing procedure with all the usual SD customizing settings, why is the system unable to process the costs?
Thanks for your always great help,
VL

Provision account key missing for condition type ZPFV in schema ZUELOC

Hi
We have defined the condition type ZPFV for freight value & mentioning the same while creating po and in past we had prepared so many po by using this.
we hv not change any thing & today we are getting message " Provision account key missing for condition type ZPFV in schema ZUELOC"
What to do???????
Thanks
Ketan Vala

hi..
If the accrual is ticked in condition type in M/06, it should have an account key assigned to the condition type in the pricing procedure in M/08.
Go to your contion type ZPFV and check whether you have checked Accrual or not..
then go to ur pricing procedure ZUELOC and check the last two colums for your condito type i.e. Account Key and Accrual Key.
Maintain these..
try this if it works.
Thanks...

Condition type EK01 missing in pricing procedure A V (error message V1206)

Hi gurus,
We get error message "condition type EK01 missing in pricing procedure A V" when creating a Billing request from a SErvice Order through TX-DP90.
We reviewed customizing regarding this issue:
ODP4 - SD Document linked to condition EK01 (this condition shall bring the actual cost in the order)
ODP1 - Dinamyc item profile to create Billing Request.
Pricing procedure: sales area assignments, condition types (including EK01)
but error still shows.
Any idea what additional setting is necessary in customizing so EK01 is transfered to the SD doc in DP90?
Thanks,
VL

Hi Lakshmipathi,
Thanks for your answer.
I have taken a look to note you mentioned but it is related to Resource Related Down Payments customizing, which is not our actual requirement.
The note mentions though condition type EK01 for the purpose I am commenting: "...when the system processes a final invoice date, it determines condition type EK01 as the active price condition, thereby billing the actual costs".
Condition Type is in our pricing procedure with all the usual SD customizing settings, why is the system unable to process the costs?
Thanks for your always great help,
VL

Condition type missing

Similar Messages

Maybe you are looking for