Condition type not appearing in PO line item

Dear All
I made a condition type Y001 for agriculture tax with below mentioned config. and marked as both header and item condition.
Cond. class A Discount or surcharge
Calculat.type A Percentage
Cond.category B Delivery costs
Manual entries C Manual entry has priority
Now problem is that when I am making contract in contract line item condition Y001 condition is appearing in dropdown and I am able to enter the same in contract and save it.But when I am trying to make a PO by referring the same contract with line item condition Y001, this same condition is not appearing in PO and also it is not appearing in dropdown also so that I can manually enter the same.
Please let me know why system is behaving like this.
Regards
SK

satish kumar wrote:
In short condition type Y001 is appearing in contract line item condition tab while making contract but same condition is not appearing in PO line item condition tab while making PO.
Hi Satish,
Perhaps you have not assigned the pricing procedure to the Purchasing Orgn & Vendor in IMG Schema determination. Have a chk once and if you have assigned try maintaining a PIR and I hope it should populate the priceing procedure and your cond type Y001 in the PO also.
Anything pls revert
Regards
Shiva

Similar Messages

Condition type not shown in the line item condition in VA01

Hi,
   I have a condition type ZINC (Installation Charges) which is added with ZPRO (Base price) & it maintained manually in item condition. the service tax (ZSER)10%, ecs on service tax (ZSEC )2% and HECS ON SERVICE TAX ( ZHEC )1% should come by default.
Step   Cou.    Ctyp      Description       From   To   Manu.   Req.   Stat. Print   Sutot   Reqmnt   Catyp   Bastyp   Acck   Accru
500      0        ZINC     Install Charg.                         |/                              S                                                             ZIC
525      0        ZSER    Serv tax            500                                              S                                                            SER
550      0        ZSEC   Ecs on S.tax      525                                              S                                                            SEC
575      0        ZHEC   HEcs on S.tax    525                                              S                                                            SHC
600      0                   Total of instal.     500 575                            |/
                                     Income
also i did change Manual entries C to B in V/06.
Regards
Jibanjyoti

Hi,
In pricing procedure control V/08
There SHOULD NOT be requirement type 23/24/25 against respective condition(this req. are for only show condition types in invoice item level)
Kapil

Condition type not appearing in contract

Dear All
I made a customised Z condition type.This Z condition type is appearing in PO line item conditions tab but when I am creating contract this same Z condition type is not appeaing in contract line item condition tab.
Please suggest why is it so?
Regards
SK

Hi SK,
Check whether the schema group assigned to vendor master (is the pricing procedure that contains the condition type)
Regards,
Bijoy Kumar

Tax Conditions types not appearing in CRM orders and quotations

Hello All,
I have created a new tax condition type in ECC and through initial load replicate the same to CRM. pricing procedure repliction with new tax condition is also successful.
But, the new tax condition is not appearing in condition tab at item level when i create quotation in CRM. other condition types are coming. data for this condition type is there in custom condition table. mapping of tax classifiction to tax group is also done in SPRO.
Please advise.
THank and Regards
Sudhir Grover

Hello Sudhir,
You should check the trace log for pricing at first. Set the user parameter:PRC_TRACE as 'X' on T-cd:SU01 for your user and check the Access analysis on the condition tab.
Regards,
Masayuki

Discount condition type not appearing in sales order but in invoice

Hi,
I have two discount condition types (MPDI,ZSDI) in my pricing procedure,at the time of sales order creation one discount condition is not appearing.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
In the billing ,i could see the condition type appearing.I have checked this,but i could not understand why it is happening.Even the condition catergory of condition is empty not L.
Also please find the screen shots below,
Pradeep

Pradeep,
Am sure user might have deleted the condition type in sales order, the same condition type woudl have entered manually in invoice.
Please check my testing, i have done the same entered ZA09 manually and after saving have deleted again in sales order, after dilivery and when i created invoice here i have entered manually the same condition type.
So in your case also the same thing could have happend, check the change log and also in invoce condtion tab check the condtion type in analysis ( Invoice analysis not order). so that you can udnerstand whether it was entered manully or not.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
This is because in the condtion tyoe the abvoe key combiantion was found with records hence the below key combition was ignored. this you observe in your screen shot with with 5.00
So my guess is the condtion records was deleted in sales order.
thanks,
srinu.

Condition type not appearing in Pricing report

Hello all,
There are 2 condition types
ZR00 - condclass B, calc type C, item condition, with acc seq Sales Area/Material and
ZQA2 - condclass A, calc type C, item condition, with acc seq Sales Area/Customer/Material.
I have maintained condition records for both & created a pricing report with field name Condition type for which position is Page Header of Pricing report.
However when i fire this report condtype ZR00 appears but ZQA2 does not. Please advise.
Thanks
-Dinesh

Hi Dinesh
In the condition table , maintain the key combination of sales area/Customer grp /customer/material and then generate the report. Then you may get the output . But make sure you have maintained the customer group in CMR also.
But it is better to reduce the key combination you have maintained , because there are many feilds which are involved, may be that could be the reason you were not getting output.
Regards
Srinath

Changing condition type values in Billing Doc Line Items

Hi All,
I want to change the value of condition types JLST and JCST to zero in the line items of proforma invoices. How can I do this?
Any function module or BAPI? Should I go for BDC?? I tried to find user exits. What can be the optimal way to do this?
Please help.
Thanks in Advance
- Neha.

Hi Neha,
You pass 0 (zero) to the field COND_VALUE in CONDITIONSIN table alongwith other relevant data.
And pass 'X' to the field COND_VALUE in CONDITIONSINX.
hope it helps.
saroj

Excise condition types not appearing in the Delivery document pricing

Hi,
This is a scenario of sales from an Exciseable Plant.
The client has pricing requirement at delivery document.
I have configured the pricing at Delivery document, but the Excise condition type (JEXP) does not appear.
We are maintaine ED values at control code level and control code field is not availabe in LIPS, i tried adding the field in LIPS structure but still the ED condition type does not appear as program is not identifying the control code field in delivery.
Can you please let me know the solution for bringing Excise condition type in the Delivery document pricing procedure.
Regards
Venkat

Changed the Condition Category from 'F' to 'L'.

Multiple line item not appearing in vendor line item in FB60

Hi
I am posting FB60 accounting entry. I am deducting WHT on the invoice.
For ex: Expense amount - Rs. 100000, WHT - 10000
Hence accounting entry is posted:
Expenses A/c.. Dr 100000
To TDS Payable 10000
To Vendor A.c 90000
Now when i see vendor line item in FBL1N there is only one credit line item for Rs.90000.
But my requirement is that, vendor line item report should include two line item:
One for vendor credit i.e. Rs.100000 and one debit for TDS payable for Rs. 10000 and not single line item for Rs.90000
Please let me know how can i get this. Is there any standard report for the same?

Hi friend,
unfoortunately the system doesn't post debit for vendor in this case. You have no report to display line items that wasn't posted.
would you like have it:
31 - Vendor ... 10,000.00
25 - Vendor............1,000.00 *
40 - expense .......10,000.00
50 - WHT ..........1,000.00
The standard automatic WHT post directly the invoice amount to vendor account like this:
31 - Vendor ... ...9,000.00
40 - expense ........10,000.00
50 - WHT ...........1,000.00
Tell about your business process. What are you doing for ?
regards

Purchase Document not appearing on GL Line item report

Hi gurus: Please help me figure out why even though I have activated the purchase document field in the field status group I still cannot see it in the line item reports when I run FBL3n. Note the purchase document field is showing up as a field for selection but it comes thru blank.
Please help me
thanks
Brian

i wanted to get the same output, it doesnt work for some reason. I had to craete a query to achieve this

Condition type not appearing

Hi Expert,
We are using sales org. 6000 for which pricing prcedure is Z60000. Now i have assigned same pricing procedure for sales org. 1500. I have done pricing procedure assignment in table T683V.
But when i am creating sales order for sales org. 1500, at that time in conditions tab of material i am not able to see the condition types UTXJ, JSE4, JES4, JIN6. These condition types i can be able to see while creation of sales order in sales org. 6000. Can you please tell me what i need to do so that i can be able to see all condition types for sales org. 1500.
Thanks.

Hi,
Please check if the tax code are created & condition percentage maintained (T-Code FTXP). And also check if (t-code VK11) Condition records are maintained for UTXJ condition type & the correct tax code assigned. In the pricing procedure analysis you can then check if the correct tax procedure is fetched for the particular condition.
Hope it is helpful,
with regards,
Hussain

Condition type not appearing in Sales order

Hi All,
Iam using TAXINN, Copied ZINFAC to KINFAC,
I have created JIVP and JIVC for VAT and CST,
I have maintained Condition Records for JIVP and JIVC.
Both these condition records are not reflecting in my sales order, i.e. the records are not coming.
Please help me in this regard
Siva Narayana.B

hi,
please check if the condition records are mentioned for the key combination matching the sales order. ie if the condition records are maintained for the required combinations. Then check if the correct tax codes are maintained in the condition record and properly determined at FTXP.
Thanks
Sadhu Kishore

Condition type not determined

Hello All,
I am using COPY CONTROL to create contract through VA41.
Problem i am facing is condition type not getting picked up at item level, though correct pricing procedure is getting determined. In that pricing procedure this condtion type is maintained but still it is not picking the condition type.
Rushikesh

Hi,
Can you check condition type detailed screen"Manual entries" field,the value in that field is either B or D.
Regards,
Chandra

VA00 condition type not getting determined for the returns order

Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputs

Hi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O

When I send e-mails sometimes they do not appear in my sent items?

I send many e-mails but sometimes they do not appear in my sent items yet i know they have gone because I get a reply? It isn't all - just some?

Quit Mail.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the text on the line below to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. If you get a warning that the file is in use when you try to empty the Trash, log out and log back in.

Condition type not appearing in PO line item

Similar Messages

Maybe you are looking for