CONDITION TYPE PR00 TO SALES AREA + DOC PP + CUST PP

Hi ,
While defining pricing procedure we only assing condition type pr00 to the procudure ? why is that so ? Since we have many condition types .?

Jerry Jerry,
Condition type PR00 is the base condition price. The whole price calculation is based upon the condition record entered for the condition type PR00. In actuality we assign all the other condition types but all these would turn out to be useless until we enter the base price condition type PR00 in the pricing procedure.
For example if in a pricing procedure we have entered conditions like K007 and KF00 and have not entered the base price condition type PR00 the values of K007 and KF00 will be shown as 0 as for these discounts there is no basis of calculation i.e. no base price.
Hope this answers your question.
Reward points if helpful.
Nagesh Murthy.

Similar Messages

Pricing Condition type in a Sales area

Hello All,
Please let me know how can I find the condition types used for pricing by the customers in a particular sales area? I know the link is in some config table like T683 T683s T683v but please tell me the exact table link..
Thanks a lot!
Reward pts for useful answers.

Have u tried this table
Communications Table SD -> CO/Projects (S008)

Sales Order Pricing - Condition Type:PR00 inactive

Hi
In Sales Order Item level pricing, condition type PR00 become inactive. It shows reason : Inactive via formulae of incorrect.
Sales Order is partially delivered & billed. For remaining deliveries, system not allowing for billing, showing sales order is incomplete.
Condition Type PR00 maintained manually. Order quantity changed several times.
Please guide me on this.
Regards
Uma

Dear Umasankar
Check in VK12 for the material whether the From To Date is maintained for current period.
Also go to V/08 and check your pricing procedure whether any invalid account key is defined.
Thanks
G. Lakshmipathi

Condition type PR00 in OVKK....?

Hi experts,
can anybody tell me why we maintain the condition type PR00 in OVKK
in ovkk we give sales area+cus pri pro + doc pric pro and condition type as PR00....
if we give pr00 and if we dont give pr00 i think it makes no difference( then why we give PR00 in ovkk) can any body explain me
for suitable replay rewards will be given

Dear Rag Sam,
Here is brief description,
The condition type that the system automatically proposes in the
double-line entry screen during sales order processing.
Enter a condition type. If you leave the field blank, the system
displays the active price condition during sales order processing.
If you change a condition manually, this will be displayed in the
double-line entry screen.
Hope this will helps you
Prem

Condition Type PR00 on materials and the price

Hi,
When I try to create a Sales Order by using VA01, in the item level, I am inputting the material number, quantity and profit center. Then when I select the same line and click on item conditions, automatically, condition type PR00 and the and amount is getting defaulted. However, for certain other materials when I click on item conditions, no condition type PR00 is being picked up. I need to manually input PR00 and the amount.
My question, I would like to know if there is any report available which shows, which materials are automatically defaulted with PR00 and what is the price automatically defaulted. I would also like to know, which are the materials are not automatically defaulted with PR00. (the cases where required to enter manually).
I am looking for any report or query etc.
Thanks in advance.

Adding to Shiva's comments...
The value for PR00 will be determined in the order only if the system could find a valid condition record exisitng. I guess, the condition type PR00 has been configured as...with value 'B - Automatic entry has priority' for the field Manual Entries. You can check the same using Tcode V/06. You are entering the values in the sales order item level for PR00 if the system fails to find a valid condition record. As Shiva mentioned, you can check the existing Condition records using the transaction V/LD for the report '15-Material Price'.
Thanks,
Ravi

Defaulting Condition types in a Sales Order Condition Tab

Hi Experts,
How to default the condition types PR00 , KF00 and MWST in Sales Order condition tab?
(manual conditions and with out access sequences) so that we can map the prices from other system to the corresponding fields of KONV in Condition Tab.
I searched in the forums and then I am posting this request.
Thank you
Ravi

Hi Ravi
If you want to default the condition types PR00 , KF00 and MWST in Sales Order condition tab without maintaining access sequence then in V/06 for PR00 , KF00 and MWST condition types maintain the option Manual entry is possible , but in your pricing procedure check the boxes Required. So that when you create sales order and when you dont maintain the PR00 , KF00 and MWST condition types system will give an error
Regards
Srinath

Pricing limits for condition type PR00

Hi,
I have got a scenario at hand, where i have to assign tolarence limits to all the conditions types in the pricing procedure. i have maintained limits in Transaction OVB2 except Base price condition type i.e. PR00. the problem i am facing is, we have got some where around 1,500 material and 3,200 customers and the price variation between the material is large(3000-150000). The main purpose of maintaining limits is to reduce the risk when entered manually. Please do consider the general business implications while replying.
eg: new pricing procedures, condition records for base price etc makes a hafty job, so can you please suggest me any other means to have a tolerence limit to condition type PR00(PR00 is used as base price for all pricing procedures).
Thank you, Have a nice day at work.
with regards
RVS Prasad

Hi venkata siva
As you are having around 1500 materials in your business . That means you need to maintain condition records for all these materials. While maintaining condition records only , in VK11 for PR00 condition type , maintain upper limit and lower limit in additional data . Then there should not be an problem
Another way of maintaining pricing at upper limit and lower limit is in OVB2.
Regards
Srinath

Condition type PR00 can only be used once

Hi Experts,
Im faced with a strange problem. Request your help in resolving it.
I tried to create my own pricing procedure by copying from RVAA01. Then i deleted all the steps and created my own steps. But when im trying to save the document, it says PR00 can only be used once. I deleted this condition type and tried to save it, it again says K004 can only be used once. Even after deleting all the earlier conditions which i copied from RVAA01, why am i getting this error.
Your help is most appreciated.
Warm regards,
Sarat.

You have deleted a row (i.e. condition type, say PR00).
After that click icon "Save".
Then when you create condition type PR00, system shall accept it.
Currently, you are deleting a condition type (PR00) but it is still "in memory" of the pricing procedure. You can not create the same condition type more than once in a pricing procedure. Therefore you can not create PR00 again & you are getting the error message.
First remove PR00 from the memory of the pricing procedure by clicking "Save", & then you can re-enter the same cond type.

V-41 tcode error :Table 304 is not defined for use with condition type PR00

Hi All,
I am trying to create a BDC using the transaction V-41.
The first screen has fields:
ConditionType and Table, where I have to fill values ZPM1 and 800 respectively.
But as soon as I enter the tcode v-41 and say enter, the above mentioned fields are already having the values 'PR00' and ' 304'. Normally if you take an example fo t-code VA02, all fields are blank.
Then an error message is displayed:
Table 304 is not defined for use with condition type PR00
This behaviour is not allowing me to use the BDC feature.
Please advise me on why this is happening. What are the possible solutions I can use to clear these values programmatically?
Can anything be done via customizing?
Regards,
Namita.

Dear ILHAN ,
Well the problem you are facing is having the following solution:
Table 304 is not defined for use with condition type PR00
Message no. VK024
Diagnosis
The selected condition type does not fit in the condition table, that is the basis for the condition record. Alternatively the selected condition type is not included in the condition types that were selected on the selection screen or that are defined in the variant of the standard selection report.
Procedure
Úse F4 help to choose a valid condition type.
If this does not give you the required condition type, check in Customizing for condition types and the related access sequences.
In the condition maintenance also check Customizing for the selection report (pricing report), that you have selected in the navigation tree, using the standard condition table as a reference.
I hope this helps.
It has worked for me.
I gave it a try and what I am getting using the transaction V-41 is create Price condition (PR00) : Fast Entry.
Please award points if you find it useful.
Regards,
Rakesh

Pricing Condition Type PR00.

Hi experts,
I have a scenario where condition type PR00 shoul be mandatory in sales order and document should not proceed further unless the basic price is put while creating sales order. Also, system should not allow double entry of PR00.
I have already marked condition type PR00 as manadatory (still document is precceding in absence of any value ) and incompletion procedure log is applied.
Pl guide on same at the earliest.
Regards,
Pallavi

Hi
Check following points :
1. Check for the properties of condition type. It should has BASE PRICE as the property. And Access sequence should have to be there.
2. Mark check for Mandaotory in the Pricing procedure.
3. Check for your calculation. Your Net value should come as zero- if the PR00 is missing.
So when you will process any sales order it will, give you a incompletion log error as net value is zero- or pricing is missing for the item. And also Mandatory condition type PR00 is missing.
Thanks
Rishi

Pricing: condition type PR00 only one time enter

Dear
In sale order we have condition type PR00 and it is manualy condition type , now user was entering the same condition type(PR00)
Two times ,how can we restrict that PR00 is enter only one time in the sale order

Check this thread where the same topic was dicussed.
[how tostop duplicate conditype entry in to prcing at order |Re: how tostop duplicate conditype entry in to prcing at order processing lev;
thanks
G. Lakshmipathi

5.000,00 exceeds the limit 100,00 for condition type PR00.

Please help me to resolve this problem as I am not able to find where sud I go to delete the upper and lower limit of condition type PR00..Whene I maintain the record for pr00 for different material it create a error with limits.

Hi
What error message you are getting? Can you check if you have maintained anything for PR00 in SD > Basic Functions > Pricing > Define condition types > Maintain upper and lower limits.
Thank$

SERVICE ORDER COST IS NOT FLOWING TO CONDITION TYPE EK01 IN SALES ORDER

hi all,
My requirement is that the cost incurred in service order should flow to the condition type ek01.
we will be running the transaction dp90 to calculate the cost for the resources used.
the cost are getting calculated at service order level but this cost are not flowing to the billing item being generated from dp90 in the billing request.
the settings that i have made are as follows: I have maintained the condition type ek01in the sales pricing procedure. are there any other settings required by me to make.
valuable answers will be be rewarded fullpoints.
regards,
ashish

Hi prince
Check out in Control data of Condition Type--PB00..Enter "NO Limitations" in Manual Entries. and check the 'Amout' and 'Value' and 'Delete' so that u can make changes to that condition type in line item in sales order.

Sales Document Type Assignment to Sales Area (OVAZ)

Dear Gurus,
I have the following problem.
These are my sales areas which have been created into SAP as follow:
ZV     Dep. Vanz TCPS     99     Distrib. channel 99     ZA     Retail
ZV     Dep. Vanz TCPS     99     Distrib. channel 99     ZB     Wholesale
ZV     Dep. Vanz TCPS     99     Distrib. channel 99     ZC     Key Accounts
I managed to assign the following list of documents to the first one:
ZV     Dep. Vanz TCPS     99     Distrib. channel 99     ZA     Retail
IN     Inquiry
QT     Quotation
CS     Cash Sale
FD     Deliv.Free of Charge
DR     Debit Memo Request
DS     Scheduling Agreement
QP     Rental Contract
RE     Returns
RO     Rush Order
OR     Standard Order
SC     Service and Maint.
Now, when I want to do the same for the 2 last Sales Area the system asks me to create them?????
What is wrong?
Please advise
Kind regards
Chris

Your basic understanding is different from what SAP offers.
You have to create common sales area. For that you have to link your sales org to a common sales area first, d.c to a common d.c and division to a common div.
Then create a common sales area of the combination of common sales org/common d.c./common div
Now in OVAZ, yo only have to link ur doc types to the common sales area. This will enable you to use this doc types for all sales areas which are indirectly assigned to the common sales area.

How to Know one condition Type (PR00) used in which pricing procedures

Hi Friends,
I have 20 pricing procdures I need information that condition type PR00 is used in which pricing procedures.
by help of
any report
any table etc
Thanking you
Arun

Dear Customer,
in standard there is no report available for your requirement.
In this case you can only create your own selection report therefore.
regards
Claudia

CONDITION TYPE PR00 TO SALES AREA + DOC PP + CUST PP

Similar Messages

Maybe you are looking for