Condition Type SRM - ECC

We have SRM 5.0, ECC 6.0.
I have created a new condition type (ZFTE) in SRM and ECC with the same name.
Is it possible to send condition type from SRM to ECC and fill condition tab of the PO in ECC?
I need detailed condition types in the PO of ECC
Regards

Hi
Please go through the links below ->
GOA : Mapping condition record between SRM and ECC
Transfer condition type from R/3 to SRM
Re: new condition type
Re: Condition types from SRM to backend
Hope this will help.
Do let me know.
Regards
- Atul

Similar Messages

CIN condition types in ecc 6.0

Hi Gud morning
what are the standard condition types in ecc 6.0
education cess
secondary education cess
Murli

HI
JEXP Basic Excise Duty
JECP Higher Education Cess (2%)
JA1X Secondary and Higher Education Cess (1%)
Regards
MBS

Delivery cost condition types in ECC

We are going for Ext clasic scenario where SRM POs will be transferred to backend. How to have delivery cost condition types in SRM which will also appear in ECC POs? In SRM condition types, condition category does not have delivery cost option , like ECC.
I created the same condition type in SRM as in back end, and marked it as statistical in the 0100 pricing procedure, but it does not appear in backend PO , although the pricing procedure in backend has the same condition type as a delivery cost condition.

Hi
You can create custom fileds in the Local SRM POs by using SAP OSS Note 672960 and 485891.
Map the data from SRM system to back-end ECC system using BADIs ->
BBP_ECS_PO_OUT_BADI
BBP_PO_INBOUND_BADI
or some standard SAP function modules can also be used here.
Other related Information ->
You can change the following credit memo data at header level:
Unplanned delivery costs
You can change the unplanned delivery costs.
Links ->
http://help.sap.com/saphelp_srm50/helpdata/en/e7/72623c6b69bf70e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/a4/f1db8a5422408695e1d5265477ecd7/frameset.htm
Condition types in SRM
http://help.sap.com/saphelp_srm50/helpdata/en/72/f40f3c98ddaa4ce10000000a11402f/frameset.htm
Condition Categories in SRM
http://help.sap.com/saphelp_srm50/helpdata/en/76/d90c3cb8d19347e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/ee/d9df3bbcce4b37e10000000a114084/frameset.htm
Hope this will help.
Do let me know.
Regards
- Atul

New Tax condition type created in ECC, replicated to CRM

Hello All,
I have created a new tax condition type in ECC and through initial load replicate the same to CRM. Even pricing procedure repliction with new tax condition is also successful.
But, the new tax condition is not appearing in condition tab at item level when i create quotation in CRM.
Please advise.
Thanks and Regards
DJ

Hi
Iam facing with the same problem we have created new tax conditon in r/3 and we have replicated it into crm we can find in the pricing procedure of crm as the new tax condition type but iam unable to see that in the order conditions tab.
Could you please let me know the solution or could u please provide me witht he solution. to kmasthanrao at gmail com.
Thanks and Regards
Masthan

Tax Conditions types not appearing in CRM orders and quotations

Hello All,
I have created a new tax condition type in ECC and through initial load replicate the same to CRM. pricing procedure repliction with new tax condition is also successful.
But, the new tax condition is not appearing in condition tab at item level when i create quotation in CRM. other condition types are coming. data for this condition type is there in custom condition table. mapping of tax classifiction to tax group is also done in SPRO.
Please advise.
THank and Regards
Sudhir Grover

Hello Sudhir,
You should check the trace log for pricing at first. Set the user parameter:PRC_TRACE as 'X' on T-cd:SU01 for your user and check the Access analysis on the condition tab.
Regards,
Masayuki

Definition of transporation condition type

Hi All,
Where do we define transporation condition type in ECC?
Thanks,
Praveen

Try following path -
In Customizing for SAP TM, SAP Transportation Management - Transportation Management - Transportation Charge Management - Transportation Charge Calculation - Basic Settings for Charge Calculation - Define Charge Element Types
You can define transportation charge element types here

How to transfer SRM PO Condition Type and Custom fields to ECC?

Hi All,
I have a scenario to transfer SRM Line item condition types and few custom fields to ECC.
I have found the following things but structure 'CI_EKPODB' does not exists in ECC.
I am using 'SRM 5.00' and 'SAP ECC 6.0'.
NOTE: I have to transfer condition records when PO is getting created / modified.
1) Earlier I was planning to use BADI 'BBP_CREATE_BE_PO_NEW' in SRM and this will transfer the data to ECC in case of PO
    Creation.
               It contains the Condition fields to be passed to ECC.
But i am unable to implement the same, whenever i create implementation when i click 'Activate' its getting activate then after few seconds its getting deactivate, i think this is because this BADI is not allowed for multiple use and SAP has already made one implementation on the same.
2) I need to implement BADI 'BBP_ECS_PO_OUT_BADI' in SRM and 'BBP_PO_INBOUND_BADI' in ECC.
SRM BADI will pass verified field details to ECC as a custom fields
       It does not contains the Condition fields to be passed to ECC, so i was planning to pass the same as custom field(s).
ECC BADI 'BBP_PO_INBOUND_BADI' will be used to map the fields to correct place and this should work.
i need to modify the structures and pass all the custom fields (z-fields) - (CI_EKPODB but does not exists kindly suggest) as data.
Other required details:
      Transfer of PO does not supported by SAP for service PO's, any suggestion on the same?
Expecting quick reply from your end.
Thanks in advance.
Regards,
Hemant

Naresh,
Thanks for quick response.
My concern is this BADI 'BBP_CREATE_BE_PO_NEW' will trigger only in case of creation, not when PO is changes.
I have to transfer condition types and custom fields to ECC in both the case (create / change)
If i have to do this only in case of creation then i can pass Condition types / custom fields then i can use parameter 'CS_PO1_DOCUMENT' from method 'FILL_PO_INTERFACE1'.
this parameter contains 'IT_POCOND', 'IT_POCONDX' and 'IT_EXTENSIONIN' as parameter so my problem will be solved.
But i dont think this will trigger in both the cases and 2nd thing i cann't implement the BADI since its not marked for multiple use so i am unable to implement the same.
Kindly correct me if i am wrong.
Once again thanks for your reply.
Please suggest on the same.
Regards,
Hemant

Replicating SRM PO to ECC PO with all condition types

Hi Friends,
I want to Repliacte SRM to ECC PO with all condition types, can any one give me idea on this
thnx
Kumar Srini

I think you meant "replicate SRM PO's condition set to ECC PO". If this is the case, there are a couple of options.
Option 1. In ECC, implement BADI BBP_PO_INBOUND_BADI, method: BBP_MAP_BEFORE_BAPI
In the method implementation, make a remote function call to SRM BBP_PD_PO_GETDETAIL. Get the condition information (E_PRIDOC). Then map it to the BADI interface parameter BBP_POCONDHEADER / BBP_POCOND
Option 2. In SRM, copy your PO transfer driver FM, e.g. B46B_DPO_TRANSFER. In the copied FM, e.g. ZB46B_DPO_TRANSFER, get the PO condition information, insert two additional parameters, POCONDHEADER / POCOND when calling BBP_PO_INBOUND, and map the SRM PO condition to these two parameters accordingly. Then implement BADI BBP_DRIVER_DETERMINE to switch to your own FM driver.

Pricing condition types in SRM 7.0

Hi,
We are using SRM 7.0, we have decided to go ahead with the pricing proceedure and the condition types which are there in ECC the same should be replicated to SRM.
We have created the same pricing proceedure and the calculation scheema in SRM.
Now my requirement is when i create a PO with the conditions and when i am transfering to ECC the PO should also be with the condition types. It should be a similar PO in ECC.
Is this can be addressed.

Hello All,
As I have already mentioned the condition types in SRM are identically matched to ERP condition type hence the data is flowing correctly and even the idoc has the z-condition type Z123.The IDOC in backend ERP has status 53.
On trial and error method we did unchecked the manual indicator check in the pricing schema for the relevant condition type and because of that now the Z-condiiton type can be seen in the backend ERP contract.
If the indicator was checked, this means that this condition can be maintained only manually (directly in the transaction
ME32K in ECC) and nothing can be transfer from other source.
Note: If the same condition type is being used in more than one pricing procedure then ensure that the check bok is unchecked for agianst the relevant condition type.
Thanks,
Yatin

Transfer of Pricing Conditions from SRM 5.0 to ECC (Extended Classic)

Hi All,
I am currently doing an enhancement on a copy of function module B46B_DPO_TRANSFER and the implementation of BBP_DRIVER_DETERMINE BAdI that will call the copied FM to transfer the pricing conditions from SRM 5.0 to ECC since in standard only net price is being transferred to ECC.
During the creation of PO, everything is ok. All conditions are transferred to ECC.
But we are encountering problems in the replication from SRM to ECC when changes are done in the PO during deleting or inserting a condition to an item. Our problem is in figuring out what will trigger us to use Change types U, I, E, D in populating the CHANGE_ID field in POCOND table that will be used in BBP_PO_INBOUND function module.
During creation of PO, I have set POCOND-CHANGE_ID = 'I' on all conditions to be transferred.
When there are modifications on a PO, I have set POCOND-CHANGE_ID = 'U' and I am encountering problem when new conditions are inserted to an item since it will not be displayed (which I believe in this case, POCOND-CHANGE_ID should be 'I'), and when deleting a condition to an item.
I would like to ask, if there is an indicator that a condition will be inserted to an item for us to assign POCOND-CHANGE_ID = 'I', and for us to assign POCOND-CHANGE_ID = 'D' when a condition will be deleted.
By the way, I used FM BBP_PD_PO_GETDETAIL (exporting: E_PRIDOC) to get the PO conditions to be transferred and have checked E_PRIDOC-DEL_IND to check if a condition will be deleted. Unfortunately, it is not working on the deletion since it seems that DEL_IND field is not being populated if a condition will be deleted.
Many thanks,
Kezia
Edited by: Kezia Layug on Mar 3, 2009 4:24 PM

Hi All,
I am currently doing an enhancement on a copy of function module B46B_DPO_TRANSFER and the implementation of BBP_DRIVER_DETERMINE BAdI that will call the copied FM to transfer the pricing conditions from SRM 5.0 to ECC since in standard only net price is being transferred to ECC.
During the creation of PO, everything is ok. All conditions are transferred to ECC.
But we are encountering problems in the replication from SRM to ECC when changes are done in the PO during deleting or inserting a condition to an item. Our problem is in figuring out what will trigger us to use Change types U, I, E, D in populating the CHANGE_ID field in POCOND table that will be used in BBP_PO_INBOUND function module.
During creation of PO, I have set POCOND-CHANGE_ID = 'I' on all conditions to be transferred.
When there are modifications on a PO, I have set POCOND-CHANGE_ID = 'U' and I am encountering problem when new conditions are inserted to an item since it will not be displayed (which I believe in this case, POCOND-CHANGE_ID should be 'I'), and when deleting a condition to an item.
I would like to ask, if there is an indicator that a condition will be inserted to an item for us to assign POCOND-CHANGE_ID = 'I', and for us to assign POCOND-CHANGE_ID = 'D' when a condition will be deleted.
By the way, I used FM BBP_PD_PO_GETDETAIL (exporting: E_PRIDOC) to get the PO conditions to be transferred and have checked E_PRIDOC-DEL_IND to check if a condition will be deleted. Unfortunately, it is not working on the deletion since it seems that DEL_IND field is not being populated if a condition will be deleted.
Many thanks,
Kezia
Edited by: Kezia Layug on Mar 3, 2009 4:24 PM

SRM PO Pricing condition from SRM to ECC -Extended Classic Sceanrio

Dear SRM experts,
We have created couple of conditions in SRM7.0 and ECC 6.0 as per requirement. When we create PO in SRM and If we add any condition in SRM PO, PO is getting transferred with netprice(including condition amount).
We would like to see conditions also in ECC which are there in SRM.
For ex:
I have created SRM PO with net price 30 and having freight amount(15) in that PO with Fregiht condition type but when it comes to ECC PO net price is changing from 30 to 45.
We would like to see net price as 30 and 15 as Fregiht condition.
Overall I can say that Is it possible to pass conditions from SRM to ECC in Extended classic scenario.
Thanks
Ravi

Hi,
the challenge lies in synchnizing the conditions and ensuring that price returned by IPC in SRM matches the price in the backend.
Please see thread
Pricing Conditions
Regards
Azad

Condition types from SRM system t backened system

Hi,
We are using SRM 7.0, we have decided to go ahead with the pricing proceedure and the condition types which are there in ECC the same should be replicated to SRM.
We have created the same pricing proceedure and the calculation scheema in SRM.
Now my requirement is when i create a PO with the conditions and when i am transfering to ECC the PO should also be with the condition types. It should be a similar PO in ECC.
Is this can be addressed.

Hi
I wish to update on this further:
Under Copying rules for Conditions, for Source table 350 (Sales Organization), I am maintaining report "RV15CC03" which is material to material.
I think I need to use something different since I am copying data from Sales Org to Sales Org.
I don't find a suitable program for Sales Org here.
Any ideas on how to go about.
Thanks
Satya

Creating new pricing condition type in srm ecs

Hi Guru's
I see that there is an option to select the Source system " local" , "other system, eg: R/3" while creating a new condition type in SRM. can you please let me know what is the importance of this? can we determine price in srm using backend pricing conditions? can we invoke the backend pricing procedure from srm and populate the price in SRM PO?
any helpful info would be appreciated
regards
deepu

Hi Nitin,
Appreciate your response. Can you please let me know how major development is it? if you can provide highlights that would be helpful. I do understand that we can customize the pricing procedure in SRM. Can you please share if you have any documentation regarding creating new condition types, access sequences, condition records in SRM similar to ECC? it would be appreciated if you can send it to pradeepwsu(gmail) id.
Thanks in advance
Deepu

SRM - condition types of central contract not copied to ERP (CentContract)

Hi,
When I add several condition types to a contract in SRM (updating). After releasing the condition types are not updated in the contract in ERP.
How can I resolve this. Is there an OSS note?
Regards,
Alexander

condition types are copied from SRM to ECC

Condition types in SRM for mapping purposes with backend contracts

Hello,
We need to map condition types for the creation of a Backend contract on the basis of a accepted bid.
We use SRM 5.0 but our products do not have prices in their product master!
We use the catalog funcion to indicate the prices of the materials. for service-items we manually add the prices in the Shopping cart.
How can I find out what conditions types we use in these circumstances in SRM 5.0?
What condition type are we using in the case of materials?
What condition type are we using in the case of service-items?
Thanks for any reply.
Aart

Hi
You can map the condition type 01CT (gross price) in SRM with PB00 for Gross Price in contracts. Standard SRM generally work with simple pricing with gross price condition types and do not have complex conditions unless you customize it. For material or services, it should matter from condition perspective unless you have done some specific customization.
Regards,
Sanjeev

Condition Type SRM - ECC

Similar Messages

Maybe you are looking for