Condition Types appearing two times in a Purchase Order

Hi,
The condition types are same in supplementary schema (for Info Record) and Purchase Order Calculation Schema. When I put some value against a condition type under conditions in Info Record then that condition type appears 2 times in the purchase order. It seems the condition type appears 1st time (with value from Info Record) because it is picked from Info Record and 2nd time (with no value) from the Purchase Order Calculation Schema.
The requirement is condition type should appear only single time in PO (by default) with or without value in spite of having info record. In case some value is maintained in Info Record then the condition type should appear with value but in a single line in PO which can be edited if required. There should not be second line of same condition type by default in PO.
Can anyone provide some idea to resolve this?
Thanks in advance

There is only 1 condition line (apart from PB00), which comes 2 times in PO by default, in MEK2 and also one condition line (one line was deleted and then saved) in last PO (from the Info Record). But the condition type still comes 2 times while creating a new PO.
Please provide some more answer to resolve this issue.
Thanks in advance

Similar Messages

In billing document VAT condition type flowing 2 times with Different value

Hi,
1. In my requirement, In order creation time , in the pricing procedure ZPROJT (Proj Material Sales) VAT condition type (JLST) is flowing one time with the condition record of 5% for one line item and the same we changed manually to 12.75 %, for the same condition type (JLST) and we saved the order. After that we created delivery with reference to the same order, final the billing document creation time with reference to the delivery (in the pricing procedure ZPROJT (Proj Material Sales))for the same line item VAT condition type (JLST) is flowing 2 times with 2 different values ( 5% and 12.75%) and it is calculating the 2 different values to the final value. But normally only the manually changed (12.75%) value should be taken to the account. Please help me How to stop the condition type (VAT C Type "JLST") from flowing two times for the same line item in the billing - and we need to take the value of (12.75% manually changed value) to the final calculation.
2. In one pricing procedure normally if you add the same "C Type" for two times it will throw the error message like "Duplication Of C type" and you can't save the order with out deleting the same. Please tell me, where is the contole for the same.

Hi,
Check copy control settings in VTFL
At item level make pricing type as D - Copy pricing elements unchanged
KAPIL

VA00 condition type not getting determined for the returns order

Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputs

Hi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O

To SET -UP message type 5 External Send to the purchase order approver

Hi All
Please help me to To SET -UP message type 5 External Send to the purchase order approver
Susan

Susan,
This to me sounds like a release strategy setup using workflow. Could you please set up Release strategies initially and and then the workflow part couldd be handled by a workflow personnel.
Else, Setup teh message type with medium 7, and partner function MP, put the user name in the partner field. Go to communication method, choose the recipient type and fiull other required parameters and you should be set.
Edited by: Pavan Kumar on Apr 6, 2010 12:27 PM

Extract of gr processing time in open purchase order

to display gr processing time in open purchase order .give me query for extract the gr processing time which table and which field we have to take

Hi
Check the tables<b> MKPF and MSEG</b> tables for this
these 2 tables only will store the data related to the GR and GI's
<b>Reward points for useful Answers</b>
Regards
Anji

Revision level not appearing in material tab of purchase order

hi
I have matained revision level in material master but it is not appearing in material tab of purchase order and print preview of purchase order
regards
Badari

Hi, If u have created proper change no in CC01 with assigned object material with proper validity period u can give revision level to material.
In order to reflect the current revision level on PO printout, the coding in PO print program should be designed accordingly to pick the latest revision level. PO output needs to be re-issued so that the new output can pick the latest information like PO revision level from the master.
Refer below link also for more information,
[Revision level in purchase order|Revision level in purchase order]

TWO CURRENCIES IN ONE Purchase Orders Release Procedure.

TWO CURRENCIES IN ONE Purchase Orders Release Procedure.
Please provide a solution if a release strategy is maintained for two currencies like USD and SGD for more clarification please Read the below Requirement.
Requirement for Singapore:
u2022          COMPANY Asia (Singapore) wants its own Purchase order release strategy is based on their local currency (SGD)
u2022          Whereas COMPANY is using only USD as currency in Purchase order release strategy.
u2022          Standard SAP works based on Character currency which is defining in Class of Purchase release strategy and converts with Local currency to compare with Character Currency.
Required analysis:
u2022          The value assigned in classification is based on Conversion from SGD to USD, Due to Exchange rate fluctuations the assigned value is differ by large amounts and hence system is either determining the higher release strategy or Lower release strategy
u2022          But during Release Strategy Configuration the Net order Value is assigned as 3600 USD considering the Exchange as 1.388889.
u2022          As per the exchange rate in the purchase order 1.3799 the system is calculation the PO Net order Value but the Strategy is Determined based on the value maintained according to exchange Rate 1.388889
In the Purchase Order the system is
Ex: Total Purchase Order Value is 4765.21 SGD and 3453.30 in USD
      For Level 1 the value limit is 5000 SGD if it exceeds 5000 SGD it has to go to his manager (Level 2) Exchange rate on 01.04.2008 is 1.3799.
System Considerations:
Possible Solution:
1.        Create a new Class with Characteristic with Currency Value SGD System should determine the class based on the combination of Plant 6000 and Document Category F Purchase Order.
2.        By using Enhancement spot with Function Module ME_RELEASE_STRATEGIE/ ME_RELEASE_STRATEGIE_EKKO
Logic:
1.        System will determine the class PUR_RELEASE from table T16FG if the system finds Plant as 6000 and Document Category as F Then replace PUR_RELEASE with New class as ZPUR _6000.
2.        Maintain Z table for the combination of Plant and Class for future requirement
Edited by: Mohammad Irfan on Jun 8, 2009 10:41 AM

Hi Mohamed,
You can create separate characteristics far all check points and assign those to class.
Regards,
Prasath

Condition type only one time

Hi ,
In pricing procedure there is a manual condition type.Now the user can do entry for this condition type more than one time for the line item.If i want to stop that by the user ,what should i do . Only requirement in the pricing procedure, is the option or there is anything else in the standard SAP ..Please suggest .
Thanks ,
Abhijit.

dear abhijit,
I have faced same problem and for this a solution is to maintain purchase infor record.
like you must be purchasing article from different vendors then you can maintain the different purchasing price for different vendor
Purchasing info records determine the prices suggested in purchasing documents in two ways:
The system,
1st searches under POrg. Data 1 - Conditions:
Conditions are included if they have been maintained for an info record manually or from a quotation (but can be changed manually afterwards)
2nd searches under POrg. Data 2 Last Purch Doc.:
If an info record does not contain any conditions (under POrg. Data 1), the system reads the number of the last purchasing document in the info record and then suggests the price from this document.
Info Update indicator for Conditions (in PO, RFQ/Quotation, Contract) :
for PO the update occurs in POrg Data 2 (last purch doc)
for RFQ/Quotation - the update occurs at POrg Data 1 Conditions (can be changed manually afterwards) and POrg Data 2.
for Contract the update occurs at POrg Data 1 - Conditions, IF at the time of the contract creation there is No info rec. Otherwise the info rec is updated with the last release order under POrg. Data 2.
but please note that the final price will get calculated on one condiition only and not on others.
regards,
Vishal
Edited by: Vishal Jajoo on Feb 19, 2008 2:16 PM

New condition type print preview time out.

Dear all,
I am a ABAPer.
I am facing one problem in PO Print preview.
My MM consultant defines one new condition type-ZPF5 .
Instead of ZPF2 we are using this condition type- ZPF5.
After that in PO ,Net value & everything coming fine.
There is a smartform also related to this.
I have added all logic related to ZPF5 .
But when going to print preview In production & clicking on print preview,
It is giving time out after 9-10 mint-Time out for ALL po,not only for this condition related .
v_no = &SFSY-JOBPAGES& -1. "in this line.
&SFSY-JOBPAGES& means " Total number of pages in the currently formatted print request.
I saw M/08 - ZPF5 Print equal to 'X ' & Statistics is ticked for this.
But when I revert back old SMART FORMS & PRINT = blank,print preview is coming fine for all PO except
ZPF5 Is not affecting in print preview,but in PO affecting.
Any help from MM side?
Thanks
Gourav.

Dear all,
Issue resolved.
I have changed my select query & remove old condition from that,now I am using only ZPF5.
Like :
SELECT SINGLE KBETR KWERT KRECH FROM KONV INTO (V1_KBE,V_PF,V_KREC)
         WHERE KNUMV EQ V_KNUM AND
               KPOSN EQ WA_MAT-EBELP AND
               KSCHL EQ 'ZPF5'. " not zpf2
Thanks all for your time.
Thanks
Kumar Gourav.

Condition Type appear twice in PO Header in Change mode

Hi Gurus,
I have done the following steps:
1. I have created an import PO and added few Freight Conditions in the header, and Customs Condition in Line item
2. I have booked a customs invoice against the PO. (MIRO posted for Planned Delivery Costs)
3. Now when I go to the change mode of the PO, then in the header I can see same condition type twice, one with the value maintained earlier and another with value 0.
Issue:
I should not be seeing the condition type twice in header.
Please help me resolve the issue as early as possible.
Thanks in Advance.
Regards,
Ankush

Hi Ankush,
Make sure that header conditions are marked as header only and same for item condirions in m/06
try creating a new PO after making these changes
Reg
Dheeraj

Lr 5 appears two times in my creative cloud apps tool

Hello,
when I opened the creative cloud tool for updating to CC 2014 and Lr 5.5, I recognized that Lr 5 was mentioned two times. For the 'first Lr', there was a button update which I used to update for 5.5, and next to the second, there was no update abvailable. After updating all apps, both Lr 5 are marked up to date.
Why are there 2 different Icons for the same Lr 5 Version ? To my knowledge, there is only one Lr 5 installed to my machines. Furthermore, I recognized the same on both my PC and my Notebook.
Best wishes and thanks for further answers !
Robert

http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
-This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

Condition type with two varibles....

We are to set up some new condition types. We need it to be in percentage, and then we need to create a formula calculating the correct value. Our challenge is that we need for different percentage value having the system to calculate based on base value for each percentage step.
Example:
1 % should use 500 USD
2 % should use 700 USD etc.
We were thinking of using a Z-table for the base value (1 % = 500, 2 % = 700 etc).
Are there any other good solutions or is this the best one?

Simen,
A Z table is the best solution for this.
If you enable it by means of a Z table, everytime there is a change in value for the percentage, you can just change it in the Ztable. If you enable it by userexit, it is unnecessary code change everytime.
So please go for Ztable. The solution will be elegant and simple.
Reward if the ifnormation helps you

User exit at the time of saving purchase order

Hi experts
There are some plants for which we need to auto GR. Is there any user exit available which will check these plants in PO at the time of saving PO document and do auto GR.
Regards

Enhancement
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MM06E011                                Activate PReq Block
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
M06B0001                                Role determination for purchase requisition release
M06B0002                                Changes to comm. structure for purchase requisition release
M06B0003                                Number range and document number
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
User exit for me21n

MRP Type V1 - How to take open Purchase Orders into consideration

hi I'm having a problem with a material which is setup as MRP type V1.
When running MRP using NEUPL a purchase requisition is created as expected based on re-order point on the material master. At this point the Purchase Req is converted to a PO, but the delivery date maybe pushed out before saving. Running MRP after pushing out the deliver date on Purchase Orer generates another Purchase Requistion with a delivery date before the PO. Is there a way to get MRP to take the open PO into consideration rather than suggesting another PO ?
Our planning horizon is set to 365 days.
Is it possible to get MRP to see the PO and not suggest a req ?
Thanks for any help

I have checked the availability check and we are using one that is ticked to include purchase orders. this does not seem to have any effect.
The lead time on the item is 5 on the material master and 15 on the infor rec which is not that high ?
and when running MB02 for the item I am running with Create Purchase Requistion = 1
is it that what I'm expecting is unrealistic? i.e that for re-order point materials MRP is only going to take into account the lead times and if there is a Purchase Order with a delivery date outside of the leadtime the system will see that we need to reorder and generates a Req within the leadtime without looking out futher to see what's on order ?

Deleated Valuation Type --Need Error Message while creating Purchase Order

Hi,
In our scenario , i need a message should flash , if enduser by mistake select the deleated valuation type while creating Purchase Order.
In current configuration , it's not there.
Await your expert opinion.
Regards
Shyam Kogta

I investigated this recently in our company and gave this answer:
A deletion flag does not restrict anything. It is just an indicator to tell SAP that you want this record to be deleted with the next archiving run.
The archiving run then checks if a deletion is possible or not.
So you can set such deletion flags long time in advance, even at a moment where you still have inventory.
To block materials from beeing used in business transactions, usually the material and sales status are used. But these statuses can only be set at overall, plant and sales organisation level.
In some transactions SAP issues warning messages if a material has a deletion flag. This messages could be customized to be an error and prevent any business. However, this type of restriction is not designed for our machine, as we use the material and sales status.
Anyhow, there is no message for valuation types that have a deletion flag in procurement area.
There is one for goods receipts (but only for a certain industry solution that is not used by us)
There is one for deliveries ( VL 211 ).
The valuation types are defaulted from customizing to the transaction e.g. purchase order. Or from info record to the PO. So a standard purchase order gets valuation type ABC , while an internal order (production) gets the DEF. Usually there should not be a need to change this valuation type manually.
So the only solution is to archive the material master at valuation type level.
But I guess, you already have POs with that wrong valuation type, which means you have to archive the POs first. It you have already batches with wrong valuation type, then thy have to be archived as well before a material can be archived.
And finally if you had stock in current year, then you can archive your material in year after next year, as SAP archives only materials that have no stock in current and previous year.

Condition Types appearing two times in a Purchase Order

Similar Messages

Maybe you are looking for