Condition Types Are Missing After Sales Doc Replicated to R3

Hi
we're implementing quotation management replicated to R/3 system.
the replication from CRM works fine, pricing is determined in R/3 perffecly.
however, first item has condition records replicated back to CRM as we want it.
but the subsequent items has no condition type replicated at all.
any lead is really appreciated.
JD

Can you set a parameter-id PRC_TRACE in your user profile. This trace when activated will perform pricing condition analysis in CRM. If a different user id is used to replicate sales documents please set this parameter for the same.
Also make sure if your pricing procedure is in sync in both CRM and R3.
Naresh

Similar Messages

JEXC and JEXS condition types are missing in client.

Hi All,
Condition types JEXC and JEXS are missing in 000 client in our present project( Indian Rollout).
These condition types are required for domestic calculation of conditions.
Please throw some light on this issue.
Note:
One more thing, all J**** conditions and TAXINN calculation schema were missing in sand box.
So copied the missing objectsfrom 000 client.
These were identified from functional perspective.
concern is will this copying client suffice CIN requirents or not.
With Regards,
Vijaykumar P

HI,
Please check the SAP master note for TAXINN - 952289 with the entire configuration.
As per the document in this SAP note - you can configure the tax conditions in different clients as per your requirement.
Thanks & Regards,

Condition type VPRS missing in billing doc while batch split delivery.

Dear Gurus,
We are facing problem of condition type VPRS (COST) missing in billing doc while batch split delivery,
Please let us know what can be problem or cause for this,
Regards,
Sai

Hi,
Check copy controls from Delivery to blling document - VTFL is there any thing missing Header as well as item level, at what lelvel your determining the price. pricing at main item level or batch level.
Pricing should be at main item level
There will be two items 1 is main item 2. is Batch item
chek cumulate cost has checked on main item or not
and also gothrough the related Notes:
Regards,
MH

WPA security Types are missing after upgrading to Windows 8.1

After upgrading from Windows 8 Pro 64bit to Windows 8.1 Pro 64bit on my Sony Vaio Duoe 13, I could not find WPA security type while configuring Wireless network manually. (only WPA2 and 802.1X are available).
I have done a lot of troubleshootings like
1-Reinstall Wirless original driver
2-Updating the wireless driver to the latest
3-Uninstall and reinstall windows 8 then upgrading again to windows 8.1
But the same.
Is there any way to add WPA to the security type?

Yes! It works!
To recap : My laptop has an Atheros AR9002WB-1NG adapter, windows 8.1. Even when it had windows 8, it was unable to connect, but unlike now, I didn't look closely enough about the type of network. Originally I thought it was
this problem. But they confirmed that others with windows 8 had no issues with this. Then , when I tried configuring the network manually, I could not find the WPA-enterprise option at all, only the
WPA2-enterprise.
So here I was, and Greg Seth's answer gave me an idea.
In the following instructions, some commands are obvious, so I won't explain unless necessary. So here's what you do :
0) Go to command line, preferably Administrator (not tried without).
1) C:\Windows\System32> cd \Users\<User>\Documents
2) C:\Users\<User>\Documents> netsh
3) netsh> wlan
4) netsh wlan> show profiles
5) delete profile name=<yournetwork>
Enclose the name of network within quotes, this is to ensure that you can cleanly set up the right profile. Don't close the netsh, we'll need it some more. If you do, just reach there the same way as before.
6) Right click the connection icon in lower right corner > open Network and Sharing Center > Set up a new connection or network > Manually connect to a wireless network
7) Try to create a profile, and try to get as many details to correspond with your requirement. The rest we'll edit in command line, so let's make it as easy as possible.
8) Do the same at the next screen. Edit Network settings > change all the parameters that you can, to match the requirement. My university tech support has a detailed document listing the options to choose, usually for windows 7, or even windows 8. get
as many of them as possible.
9) Finish. Move back to your netsh terminal
10) netsh wlan> show profile <profilename>
without quotes this time. This should show your previous attempt at creating a profile in the GUI dialog boxes. In my case, it had WPA2 and AES. It has to become WPA and TKIP. I also set my authMode to userOnly, since I hadn't done it right in the dialog box
before.
11) netsh wlan> set profileparameter
displays a humongous list of parameters with detailed options, just carefully examine the syntax. It's all here.
12) netsh wlan> set profileparameter name=<profilename> authentication=wpa encryption=tkip authMode=userOnly
13) netsh wlan> set profileparameter
Don't exit this yet.
14) Now click the connection icon, and connect to the network. It will ask you the username and password in a different style, that was my clue something was different this time.
15) It should connect. In my case atleast, it did. Verify by browsing.
16) netsh wlan> export profile name=<profile name>
In order that you're not put through this ordeal again, export the profile safely to a file. Again, the profile name in quotes.
17) Wonder why microsoft makes things difficult for us!

Condition type EK01 missing in pricing procedure A V (error message V1206)

Hi gurus,
We get error message "condition type EK01 missing in pricing procedure A V" when creating a Billing request from a SErvice Order through TX-DP90.
We reviewed customizing regarding this issue:
ODP4 - SD Document linked to condition EK01 (this condition shall bring the actual cost in the order)
ODP1 - Dinamyc item profile to create Billing Request.
Pricing procedure: sales area assignments, condition types (including EK01)
but error still shows.
Any idea what additional setting is necessary in customizing so EK01 is transfered to the SD doc in DP90?
Thanks,
VL

Hi Lakshmipathi,
Thanks for your answer.
I have taken a look to note you mentioned but it is related to Resource Related Down Payments customizing, which is not our actual requirement.
The note mentions though condition type EK01 for the purpose I am commenting: "...when the system processes a final invoice date, it determines condition type EK01 as the active price condition, thereby billing the actual costs".
Condition Type is in our pricing procedure with all the usual SD customizing settings, why is the system unable to process the costs?
Thanks for your always great help,
VL

Condition type is missing in Pricing Procedure determination

Hi experts,
We have a problem with Pricing Condition type in CRM.
We have created a Transction in CRM as a follow up for the Transaction which is replicated from ECC to CRM the pricing procedure has been determined. But the net value is "0".
when I checked in the conditions tab page "the condition type is missing" I checked Pricing Procedure the condition type is very much there. Then I checked for access sequence for that Condition type "Access sequence is also maintained.
Then I checked copy controls for the Source and Target Item categories, for copy conditions the indicator is set up as "copy conditions,Redetermine taxes" then I changed it to "Copy all conditions".
But still it is not happening.
Can any please help me in this regard? Did I miss any configuration?
Any help will be rewarded with points.
Regards,
Frederick.

Hi Fredrick,
This requirement must be assigned in your Pricing Procedure for condition type VKPO.
The system first checks whether the requirement is fulfilled and than only execute that condition type.
Requirements are nothing but Java Routines, which check for some condition before executing a condition type.
For this Go to path
IMG: CRM-> Basic Functions-> Pricing-> Define settings for Pricing-> Create Pricing Procedure.
Choose your pricing procedure here. Here for the condition type VKPO requirement 41 must be assigned in column REQ. The requirements are coded in JAVA in SAP CRM.
If this Pricing Procedure has been downloaded from SAP R/3, u can check in R/3 itself (Tcode: V/08) what the requirement is meant for, but choosing F1 and than the path for customizing.
Regards,
Shalini Chauhan
Edited by: Shalini Chauhan on Apr 29, 2008 2:43 PM

Condition record is missing in sales order

can u please help me on my issue,my issue is in my sales order there are the different types of materials are there,on which the tax is applicable as12.5% on few materials,20% on few materials,on service materials tax is 10%, 2%, 1%,depending on this i have mapped the conditions and it is calculating accordingly,but when i see in sales order by selecting one material,when i go to conditions,analysis of that particular line item,it shows 10% 2% 1% condition records are missing,same wise verse when i select another condition and see the analysis it shows 12.5% condition record is missing,when i go and select the another condition,if i check the analysis it shows 20% tax condition record is missing,but its not throwing any error,and showing document is complete,can any one suggest is it the right procedure or i have to make any changes in to it.

Hi
I see no issue in this. It is correct system behaviour.
When you have different tax rates for different materials, obviously the condition records will be accessed based on the entries maintained for each material.
E.g For material with 12.5% tax rate when you check in vk13, you will find only that entry and no entries for 20% and 10%, 2% and 1%.
So the access sequence fetches only what has been maintained in VK11 for each material.
This is absolutely fine. Go ahead and save the order.
Regards
Madhu

No CO-PA documents are generated after Sale processes

Dear All,
There are no documents generated after Sales processes in CO-PA.
Even the revenue cost element is assigned to Profit segment.
And all SD conditions are defined in ke4i.
How can we solve this issue?
With best regards,
Kamila

Hi
Pls check the following:
1. The revenue Accounts have been created as cost elements with category 11 or 12
2. The Condition Types are not excluded from flowing into COPA
IMG>Controlling>Profitability Analysis>Flow of Actual Values> Transfer of Billing Documents>reset value/quanity fields
regards
Sanil Bhandari

Condition Types display in a Sales Order

Dear Gurus,
In our Pricing Procedure we have 2 condition types ZFR1 (Freight) and ZINS (Insurance) which are always Header type and should be entered manually. So according to normal procedure, I inserted them in the pricing procedure and maintained them as 'Manual' and selected them as Header conditions in Details of condition types with no Access Sequence and also selected them as 'No Limitations'.
Now my requirement is that these condition types ZFR1 & ZINS should be available by default in a Sales Order under 'Conditions' tab and under 'CnTy' column and their values should be in Editable mode under 'Amount' column, when we go to the Header data view, but should be greyed out in Item data view, since they are Header conditions belonging to the whole document.
Here my problem is that what ever combination I do in V/06 or V/08, system is not displaying the condition types by default. That is, I have to or the end user has to remember to enter the condition types and enter the values. But if I can display them as default when we go the Header view, Conditions tab,. end user will see them and will remember to enter values in them.
The one problem I have is, I cannot make them as 'Mandatory, as they are not always required in all Sales Orders, so there are times when we dont have to enter any values there.
I went through the search forum but didnt find any useful material, kindly help me out here.
Regards
Venkat - Hyd

Dear Lakshmipathijee,
Thanks for your answer, I have indeed maintained both the condition types at Header level. Normally when we do this kind of settings, the conditions screen is like the following:
10....0....PR00....Basic Price...........1000.....(this 1000 is from condition record)
Now if the end user needs to add values for ZFR1 or ZINS, he needs to remember the Condition types and enter them to be able to enter values in the document.
But suppose there is a way of displaying the Condition Types with out values as shown below, then the end user will not have to remember to fill them up, he can simply come to the conditions screen and they are visible there and he will just fill them up with values. The following is how I would like the conditions screen to be seen:
10....0....PR00....Basic Price...........1000.....(this 1000 is from condition record)
20....0....ZFR1....Total Freight.........._____...(this should be a blank field)
30....0....ZINS.....Total Insurance......_____...(this should be a blank field)
In these editable fields of Freight and Insurance, the end user will enter the values in case they are neccessary or leave them blank.
If I maintain the condition types as mandatory and manual, header condition screen is not displaying the Condition types??!!!!
If I maintain the Header conditions as Item conditions also in V/06, then the header conditions screen is displaying the conditions in grey mode, without any value (as they are manual conditions) and in the item screen, they are in editable mode, but system is not allowing me to input any value, saying these condition types are not item level condition types and they are to be maintained at header level, but like I said, at Header level, the fields are greyed out !!!!
So, any help plz..
Regards
Venkat - Hyd

In va01 condition types are appearing twice

Hi
In the pricing conditions screen of sales order I find that all the condition types are appearing twice and also calculted taxes twice.please give me solution

Hi Swapna,
Make Exclusive checkbox in your access sequence in V_T682I.Check your calculation of pricing also.Check there are no of threads on this topic.
Regards,
Madhu.

Text messages and phone calls from March 2012 to date are missing after activating iphone5

text messages and phone calls from March 2012 to date are missing after activating iphone5. I backed up my 4 before activating my 5. Can i retrieve them somehow?

i would not want to bet on nokia ever releasing a patch or update in the software to allow this function on this particular phone.
if you look at nokia phones over the years, they have added functionality like this across a wide range all at once, take for example timed profiles on symbian phones. these have only just been phased in.
i do not think it is a development cop out, more along the lines that nokia is a huge company and as such would have a huge effor in market research. if they didnt pick this out through their market researc, why spend the money adding it?
the comment on annoyance is entirely personal to me, as it is important to you - you may want to consider moving to a symbian (series 60) based handset as these give you a lot of expansion for this sort of need.

I had to replace the hard drive on my computer. I am now trying to download Adobe Photoshop CS6, previously purchased. I get an error that files are missing after waiting for the whole download. I have Windows7

I had to replace the hard drive on my computer. I am now trying to download Adobe Photoshop CS6, previously purchased. I get an error that files are missing after waiting for the whole download. I have Windows7

The error msg said that the file archive part of Adobe photoshop CS6 is missing and that I need all parts in the same folder.

How can I install plugins? my files are not opening because some are missing after updating my OS

How can I install plugins? my files are not opening because some are missing after updating my OS
I can´t update the software because it crashes
Thanks

Casiii which Adobe software or service is your inquiry in reference too?

All music in my library are missing after sync.

All music in my library are missing after synch, but it seems that its still in the phone cause I checked memory usage and it doesn't add up. And when I connect it to itunes and checked the memory usage bar in the bottom, it seems that my music was categorized in "Others". I'm using iPhone 5s with the latest OS.

This has just happened to me, I've had songs in Music on my phone for years and suddenly, and randomly, they're greyed out and unplayable. This applies to some playlists and not others, to songs I've played on my phone even in the last week.
Damned infuriating and I can't yet find a resolution - Apple, what have you done this time!

Keynote and Docs to go are missing after iOS5 update

I recently upgraded my iPad2 to iOS5 and now my keynote and docs to go apps are missing. What do I do now?

If you previously downloaded them they should be free. I know it looks like you will be charged but if you click on the app to install it, enter your ID and start the download, a box will pop up saying that it looks like you have already downloaded this app and it will download it again (free of charge). That has been my experience.

Condition Types Are Missing After Sales Doc Replicated to R3

Similar Messages

Maybe you are looking for