Condition update issue

Dear all,
could you please help out on this issue
1. i created one condition type n that condition type condition update check box is activated.
2. maintained condition record as discount in percentage then click on additional tab there will be appeared 3 fields
MAX value
no. of orders
MAX QTY
3. this scenario i able to see the determination of condition type in only number of orders but another 2 categories or options are not working.
Thanks in advance

Hi Shiva,
PFA here with condition type control

Similar Messages

How to create conditional update trigger in sql server

How to create conditional update trigger in sql server

You cant create a conditional update trigger. Once you create an update trigger it will get called for every update action. However you could write logic inside it to make it do your activity based on your condition using IF condition statement
Say for example if you've table with 6 columns and you want some logic to be implemented on update trigger only if col3 and col5 are participating in update operation you can write trigger like this
CREATE TRIGGER Trg_TableName_Upd
ON TableName
FOR UPDATE
AS
BEGIN
IF UPDATE(Col3) OR UPDATE (Col5)
BEGIN
....your actual logic here
END
END
UPDATE() function will check if column was involved in update operation and returns a boolean result
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Condition update???

hai all,
i want to use a condition type K004, and i have checked condition update
feature in the condition type template, i have maintained maximum condition value
in the condition record as 2000. and when iam creating order, the condition type should automatically get swithched after reaching the value of 2000.
but it is still appearing in the next created order.
whatis the use of condition update feature ?
kindly update the issue.
regards
sriram.

HI Sriram.,.,
This is the consept of condition update ,Please go through & check out whether you followed the same process or not
Condition update
Controls whether limit values are relevant for pricing.
E.g.: you can make the use of a particular condition record in the document dependent on a specified total value.
This total value can be specified in the condition record.
Condition Update -
This function is configured at the condition type level. it is basically used to update the pricing elements at various levels of the order cycle. like for example price calculated at the order level may differ by the time is delivery is due for that order. Pricing elements such as freight, taxes change periodically. therefore a condition update is needed inorder to update the pricing elements.
For validating the condition record for the first 100 orders,
you need to Customise the Condition type by checking the *condition update. *This will make the condition type updates.
In the maintaining screen condition record of the condition type go to Additional data and give the value either total value or the total number of orders(like 100 in your case).
This will make the condition record work for 100 times. You can also see the status of number of records that were already been utilised, in the Change condition record screen go to the environment and the cumulative values will give you total consumed sales orders. This will work for you
In a standard SAP system the check against number of orders is limitted to 3. So if you want to check against 100 you will have a problem. In this case you have to change the domain for "ANZAUF" as the value range is limited from 01 to 03. If you can convince your customer that you limit to first 99 than you only have to extend the range.
If you have to go for 100 or higher you have to change the length of the domain from 2 digits to whatever is required.
In both cases you change a standard SAP setting which will have an impact when you do a release upgrade.
REWARD if helpfull
Thanks & Regards
Narayana

No condition update from the sales orders exist - VK322 Message

Hello All,
I have activated " Condition Index" & " Condition Update" flag for one of my discount condition type and then created it's condition record along with scales on three levels. The condition type which I mentioned above is set as " Value Scale" in Scale Basis for checking the document value and apply the applicable discount percentage.
I have created three sales orders wherein the discount percentage is getting applied as per my condition record ( so, the document value is getting accumulated and compared with the condition record correctly ) but when I try to check the cumulative values ( ctrl +shift + F4 ) from the condition record, I get information message " VK322" mentioned in the subject.
VK322 -
No condition update from the sales orders exist
Message no. VK322
Diagnosis
The following causes are possible:
1. There are no sales orders for the condition record that you selected.
2. Updating condition records in the sales order entry is not active.
Procedure
Concerning 1:
Check the sales orders created for the condition record that you selected.
Concerning 2:
Activate the updating for condition records in the sales order entry.
I have checked everything in SPRO for this but could not find anything which can give me a clue to resolve this problem, especially " Concerning 2" part of this message.
My requirement > To be able to see the cumulative values from condition record.
Also, in which table the accumulated values get stored?
Appreciate your expert advise on this issue.
Regards,
Hrishi
Edited by: Hrishikesh Bhalwankar on Sep 13, 2011 1:59 AM

Hello Everyone,
I would like to thank each one of you for giving valuable inputs in regard to my requirement and I would like to let you know that I am able to achieve the results as per the expectation.
I would also like to share some key things which I did ( with the help of all your expert inputs ) due to which the requirement is met:-
1. Activation of ' Condition Index, Condition Update' in V/06 for the discount condition type.
2. Maintained ' B - Value Scale' in Scale Basis for the said condition type in V/06 - my requirement was to check against a value to apply the necessary scale base percentage.
3. Activation of ' S071' info structure via OM01
4. Condition record maintenance as per the required scales.
4. Written a new routine to check the accumulated condition base value from S071 along with the current document condition base value.
5. Put this routine in ' Scale Formula' in V/06.
This is giving me the perfect results for the correct application of the discount.
Just last question - How to re-organize the S071 info structure as I tried to re-organize it with Standard Program ' RV15F001' but it is not re-organizing this info structure... Any idea on this?
Thanks a lot friends for all your advice...
Regards,
Hrishi
Edited by: Hrishikesh Bhalwankar on Oct 11, 2011 2:11 AM

Condition Update and Condition Record

Hi Friends
We have maintained Condition record validity and same will be used for u201CCondition updateu201Dfeature.
Condition Update says that Condition record to be executed only first 10 orders for one customer as per our configuration and from 11th order on ward new condition record to be triggered automatically.
Note: we are not sure that how long customer will take time to finish first 10 orders.
So kindly let me know if there is any way to resolve above mentioned issue.
Warm Regards
Vijay

hi Raghu,
thanks for the your response but condition record is based on material ....and you must be expecting if it is on customer based we can manage it through validity right ....but how can we sure that customer will be closing his orders by some time.
please let me know if you have any volition.
warm regards
Vijay

Why can't we get a straight answer from Apple about updater issues?

Why are there thousands and thousands of posts from people all having the same issue? We try to update IPod software using latest updater, and it causes IPod to no longer be recognized. All we want is someone from Apple to FIX THE PROBLEM! Yet all we get are refferals to complicated articles that never seem to work for at least half the people. Clearly it is a problem with these updaters. WHY IS APPLE NOT FIXING THIS ISSUE? Can anyone give me a straight answer!?

Hi Wolf,
Welcome to Apple Discussions
"thousands and thousands of posts"
There are roughly 10,300 thread with 50,000 posts in the iPod Nano forum, and there are probably another 500,000 who don't even know it exists. I don't there there has been a thousand posts on the updater issue. It may seem like thousands upon thousands, but don't forget; you're at an Apple Support Forum.
"All we want is someone from Apple to FIX THE PROBLEM!thousands and thousands of posts"
There's no need to "shout". I don't think Apple is going to hear you from shouting in a user to user forum. Nor will you probably get a answer (here) from Apple for the same reason. I have a -------- (straight) answer for you. I don't know what's going on specifically (no one really knows in this forum because they are all users. Anyone who would know won't say), but I can assure you that Apple isn't ignoring the issue. They are the quickest to respond to any problem that comes their way. If you would like to get Apple's attention, I don't suggest ranting and raving in the iPod user to user forum. I suggest submitting polite feedback to Apple here.
Jon

Is there a consensus on how to solve security update issues?

hi,
i'm writing to you from a PPC G4 (AGP graphics) that will self-destruct by the time i switch off and (attempt) to re-start tomorrow. i will then need to do a re-install, just to see if i have gotten any replies (grinds teeth to the root). it will probably be my 8 th re-install in the past month. i just can'st takes no mores, Cap'n
<exasperation>deep breath... each time i have done a clean install, zero-ed all data when erasing (7 times over, on this occasion), repaired permissions before and after each software update, and followed every advice i could find via google to pre-empt another "Error: underlying task reported failure on exit" and the inevitable hanging grey screen; i have earned nothing but another Disk Utility report of the same problem. my HD seems to be OK - Disk Utility and Disk Warrior both say it's "verified" by SMART (although i've read this could be no assurance...). it's 40 GB, nothing else installed but NetBarrier; nothing saved on it (just 3GB of OS).
i've searched this forum over the last weekend and come across a diverse range of methods in resolving software update issues. i have tried downloading the security update and safari 3.2 directly from the site and bypassing Software Update- to no avail (but noticed that they are quite larger in MB than via Software Update??).
the one suggestion the intrigued me was installing the update via Terminal. why would this be any different? the worst thing about this is that there is no universal way that'll work for all, just individual solutions for different macs??? could my problem be exacerbated by using the double layer (double the permissions to fix?) of a Panther OS with Tiger Upgrade disk?
when i last tried to resolve the "error" with safe mode, fsck and DU Repair Disk/Permissions, which initially failed, i resorted to Disk Warrior, which re-built the directory, and "fixed" the HD. when i re-tried fsck it said the HD was "ok", but i still had the "error: underlying task..." on DU?
is there an issue with the Security Update oo8 because it's PRIMARILY for 10.5 and not Tiger? why have some encountered this problem and others escaped any seeming conflicts ? is this problem also caused by JAVA updates (there are, after all, 4 updates!)
more importantly, WHAT CAN I DOOOOOOOO?
thank you

looking at your suggestion to check /Library/Startup items in the concurrent thread ("Help needed after installing Security Update 2008-008"), i recalled that the only thing i have in this file system is 3 folders concerning Intego, NetBarrier and Virus Barrier. one of these contains the NetBarrier x4 daemon which has no image, just the apple "pencil, ruler, pen on paper" "A" image. i don't think it correctly downloaded, but this the case in every instance.
i'm running netbarrier x4 10.4.5 updated and downloaded on installation. intego Support says that there should be nothing in my "Startup/Login items". i thought they meant Login items (users>login items) because when i take the folders out of my "/Library/Startup items", NetBarrier fails to "initialize".
intego is now on newtbarrier x5, but they say x4 is fully compatible with Tiger???
my baby maybe getting on, but it's strong enough, i just need to know what's bugging it!

10.9.2 Update Issue (VPN) - Eclipse Perl debugger issues while connected to VPN

This post was initially added to this discussion: 10.9.2 Mavericks update issues
I have yet another issue related to 10.9.2 update - Eclipse Perl debugger issues while connected to VPN...
One of the big changes introduced by 10.9.2 update - are VPN changes (security fixes). Unfortunately, whatever these changes are - they "broke" Eclipse (OpenSource IDE) debugger. I am not sure if *all* programming languages (Eclipse plugins) are affected by this, but I know for sure that 'Epic' (Perl plugin) debugger *stopped working* while system is connected through VPN.
Here is the error that gets “popped-up” in the Eclipse:
Timed out while waiting for Perl debugger connection
… and here is exact exception stack that gets printed:
Unable to connect to remote host: 130.10.210.74:5000
Compilation failed in require.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
main::BEGIN() called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
eval {...} called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
BEGIN failed--compilation aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
Can't use an undefined value as a symbol reference at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 7596.
END failed--call queue aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
(of course IP address changes dynamically for each VPN connection session)…
I was able to prove that this issue is related to 10.9.2 update:
Issue *does not* exist under 10.9.1 (I had to revert back to 10.9.1 to get it working again)
No updates were performed around the same time 10.9.2 update occurred (I verified that using Software Update log)
No configuration changes were introduced around the same time
Reverting back to 10.9.1 using Time Machine (thanks god I had backup !!!) fixed the issue
Steps to reproduce this issue:
In Eclipse, try to use 'Epic' (Perl plugin) to debug any perl script while *not* connected through VPNEpic debugger works
Connect to VPN
Start Epic debugger to debug same script
Debugger *does not* start, and "Timed out while waiting for Perl debugger connection" error pop-up comes up after some time. At the same time, exception stack (listed above) is printed in Eclipse's console
I am programmer/software developer, I work remotely (telecommute) and thus have to rely on use of VPN to connect to company's intranet. Perl - is primary language used by my team, and we use Eclipse IDE with Epic plugin - heavily. Use of Epic's debugger - is a *very large* aspect of my work, I cannot work without it. So in essense, 10.9.2 has *entirely* disrupted my ability to work! It took me almost a week to get back to normal work environment, and I cannot afford to let it happen again... I need Apple's development team resolve this VPN related issue, as soon as possible! Because of this issue, I am *stuck* with 10.9.1 and can not upgrade my laptop to any other versions. In fact, I had to disable system updates - just so I do not run into this issue again... I contacted Apple's Tech Support on 02/28 with this issue (Ref: 582428110), asking to raise trouble ticket. Since then, I tried to follow-up on that issue, but do not get any information. Please advise on the status:
is there a trouble ticket to track this issue?
is there any progress?
what's the ETA for an update that fixes this problem?
- Val
Message was edited by: vpogrebi

Am I the only one experiencing this issue ???

Condition update in sales order

Dear All,
I am trying the condition update functionality in the condition records. The condition type is a discount condition type maintained in percentage.
I have updated the check box in the condition type and created a new condition record with the maximum allowed value for it.
But when i create the order, delivery and billing the condition record is not getting blocked and the system is not giving the warning message even the value exceeds the amount given in the additional tab in the condition record.
Regards,
Parthasarathy.R

Hi Partha,
Creating condition update is a special scenario.Let us take the following Scenario.Company xyz decides to sell a new product ABC for a discounted price ,say,Rs 100 until the cumulative value of the dicount reaches 10000.This means that effectively for the first 100 orders this special discount is applicable.Once the first 100 orders are raised then the system automatically stops processing that special discount.But it never blocks the order.
Regards,
K.V.S.Phani Prasad.

My new iPod Classic will not sync with my new Mac Book. My iPhone 5 does, so does 2nd gen. iPod touch. Apple Store cannot figure it out. Tried different Classics on different Macs, same thing. iTunes update issue ?

The iPod Classic I bought a month ago is not synching with my new Mac Book I bought 3 weeks ago. All the software was immediately updated. My iPhone 5 synchs fine, and so does my 2nd generaton iPod Touch. The original computer I synched all of these devices on was my HP latop. I bought my Mac and Classic to the Apple Store for a 'Genius Appt' and they could not figure out what the problem is. The connected my Classic to another computer and the same thing happens. It says device is not recognized. They also took other iPod Classics and connected them to my Mac and other Macs. The same thing was happening. They took notes and said it probably is an iTunes update issue.
I can manually drag songs into my Classic but I lost all playlists because it cannot be backed up as well and they had to restore it. For now I am holding on to it but it's usless to me if I cannot use it the way I liked too. I used it for the gym and bike riding and my last iPod battery died after 6 years. A charge would last 45 miutes. I love the Classic for what I use it for but it's a $275 brick to me now. At least the renewed by receipt so I can get a full refund.
Is anyone else seeing this issue ? The Apple Store employee said he saw a first generation iPad havng the same issue. As of now the Support Dest is unaware of this. As much as I love my new Mac I am disappointed I cannot sync my new Classic to it. Total bummer.
Any help would be apprecated.

By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

Unable to Resolve Windows Update Issue in Windows 8.1

Hello,
I recently, as far back as 1 month ago, began experiencing issues with the update service under the Windows 8.1 OS platform.
I found that I was having to repeatedly run the Windows Update Troubleshooting Tool. This appeared to fix the issue with each run of the tool, but eventually I'd have the same problem receiving updates again. My problem is as follows:
1. Windows Update service hangs during register analysis.
2. Unable to reset (stop or restart) wuauserv.
3. Unable to reset (stop or restart) Cryptserv.
4. Unable to reset (stop or restart) BITS.
5. Unit recently, was unable to connect to internet from Desktop GUI, but was able to connect using Metro GUI.
I'm not sure is there was a recent update that caused this issue, but I can no longer download updates for my system, nor can I successfully run the Windows Update Fixit tool.

Hi,
Let's confirm these situations:
Now your desktop Internet Explorer can't connect Internet.
You receiving the same updates again and again.
If I am right, please check that update's installation status from update history.
Then refer to this article to troubleshoot:
http://social.technet.microsoft.com/Forums/en-US/c842b997-42a4-41fb-9992-b58d65d068d9/forum-faq-common-steps-to-start-troubleshooting-windows-update-issues?forum=w8itprogeneral
Karen Hu
TechNet Community Support

Sender JDBC Adapter Select/Update Issue

Dear All,
We have configured a Sender JDBC Adapter to Poll data from the DB2 tables. It is working fine and both the select and the update queries written are also getting properly executed and are changing the status of the flag from Y to N once read from database.
In the communication channel ->
select * from <table> where flag = 'N'.
update <table> set flag = 'Y' where flag = 'N'.
But I have one doubt after executing the select query some new data comes into the table of status flag 'N"., then will this unselected data will also be updated to 'Y' .
The question is while we do a select and update from XI on the DB table and at the same time there is an insert happening into the table from the other end how will the adpater behave in this case.Will it result in missing of some records during next select/update transaction from XI..
Your inputs will be appreciated.
Regards
Amit

Amit
Did you ever get a solution to your question ?
Sender JDBC Adapter Select/Update Issue
Posted: Apr 24, 2008 2:29 PM Reply
Dear All,
We have configured a Sender JDBC Adapter to Poll data from the DB2 tables. It is working fine and both the select and the update queries written are also getting properly executed and are changing the status of the flag from Y to N once read from database.
In the communication channel ->
select * from <table> where flag = 'N'.
update <table> set flag = 'Y' where flag = 'N'.
But I have one doubt after executing the select query some new data comes into the table of status flag 'N"., then will this unselected data will also be updated to 'Y' .
The question is while we do a select and update from XI on the DB table and at the same time there is an insert happening into the table from the other end how will the adpater behave in this case.Will it result in missing of some records during next select/update transaction from XI..
Your inputs will be appreciated.
Regards
Amit

Had update issues but now my iphone is in a loop of the apple sign then the circling thing, itunes doesnt even pick it up, cant get past this point!! ? any help?

had update issues but now my iphone is in a loop of the apple sign then the circling thing, itunes doesnt even pick it up, cant get past this point!! ? any help?

You might want to check this thread https://discussions.apple.com/thread/3374367 hope this helps

PO Condition Type Issue

Hi All,
I have encounter a PO condition type issue, hope to get someone to enlighten me.
I have create both cuztomize condition type ZOT2 AND ZOT3.
With config in Control data 1
Cond. Class - A Discount or Surcharge
Calculat. type - B Fixed Amount
Cond. category - B Delivery cost
Group Condition
Select for Group cond. & RoundDiffComp
GrpCond.routine - 1 Overall Document
ZOT2 in header condition should be divided into item via value.
ZOT3 in header condition should be divided into item via quantity.
Both condition type havemanually enter with value 300
In the test PO I have created 3 materials:-
Material     Quantity     Net Price     Item Net
A     100     1,615.00     161,500.00
B     100          16.15         1,615.00
C     1000          16.15       16,150.00
In the Item view calculation for both condition type as stated below:-
ZOT2 - 270.27 : 2.70 : 27.03 (Ratios base on Value 100:1:10)
ZOT3 - 270.27 : 2.70 : 27.03 (Rations base on Quantity 1:1:10) the amount result should be 25: 25: 250 but the result I get from the system for condition type ZOT3 is the same as ZOT2.
Please advise how to reticfy the configuration. Thank you.

Eugenia Foong Pui Mun wrote:
Hi Shiva,
>
> I have try to config with the info you have suggested, but it does not seem to get the expected result.
Hi Eugenia...
I tested scenario with values you have mentioned. It works perfect both ways. Pls follow this....
1. Pls avert the changes I had suggested in my prev reply for changing the condition types. (group condition active, round diff condition & group cond routine, keep them as they are)
2. While you enter value in header with condition type ZOT2. the value gets properly distribute by the ratio 100:1:10 and thats perfect......Now
3. While you enter the values for condition type ZOT3 in the header...Pls note that your Total Qty is 1200 and the total condition value is 300 this means per unit qty the value is 300/1200 =0.25...
Now while you enter the values for ZOT3 in the header, enter 300 in the Amount column and 1200 in the Per column, meaning that the total of 300 shoud be divided into 1200 units irrespective of quantities per Line Item
Now check the results and you will have the distribution ratio 1:1:100
NB:For ZOT3 (Qty base) to work the UoM for all the line items must be similar
Pls check and revert
Regards
Shiva
Edited by: Shivaspatil on Nov 24, 2011 12:42 PM

Has anyone called about the 1st Gen Update issue?

I was just wondering if anyone has actually called Apple about the 3.1.3 Update issue with the 1st gen iTouches. I don't want to waste my time and call when they might just respond with "there's no current solution". My iPod has been bricked on that screen with the "plug in the USB cord" symbol for a few days. Help!

My wife had the same problem with 1st gen 32gb Touch. She uses a pc based laptop with Vista OS. Couldn't get past the Apple logo even when trying to reset. I plugged into my Mac tonight, and for the heck of it, reset the iPod using the on/off button and home screen button. It now would appear in my iTunes and allowed me to reset. It is starting from scratch again (as she doesn't appreciate my play list), but at least it is fully operational again.
Have seen where others state they can't restore. May be able to using a Mac. Food for thoughts anyway. Hope this helps.

Condition update issue

Similar Messages

Maybe you are looking for