Condition value in billing not coming properly.

Hi All,
We have an issue wherein the condition value in billing document is not coming properly.
When qty is multiplied by the price the value should come as 208.04 ( 54.51 * 4 qty ), but the condition value is coming as 16.77.
We checked but could not find any proper reason for this.
When checked in details of condition type, we can see the Condition Origin as manually entered, but we are ot ale to trace the changes and also who entered the condition manually.
Kindly advise on the issue as it

Hi Mr. Satish,
I agree with Mr. Rajesh and for your 2nd question.
We can easily track down who entered the condition type in order
there are two possiblities
Either user who created the order, enter that condition type, that will not recorded in the changes so you can see the user id at header level--> on sales data page "Created by"
If some other user come in VA02 and enter the condition type then you can see it in
Go to Menu "Enviroment" --> Click at changes --> your document number is there --> Execute and see who entered it
Regards
MT

Similar Messages

WBS element output not coming properly .

Hi ,
I have a customized report with , project(proj-pspid) ,wbs element( prps-posid) as selection parameters . The output is coming preperly when project is given as output but is not coming properly when wbs element is given as input. I am using PSJ logical database . Not sure why in debugging while giving only wbs element it is going to 'Conversion_exit_abpsn_input' instead of teh conversion exit 'Conversion_exit_abpsp_input' . Any idea on how it can be resolved?

Hi,
Please refer the WBS element to PSPNR (PRPS-PSPNR) instead of prps-posid ,
prps-posid refers to exit 'Conversion_exit_abpsn_input' and not 'Conversion_exit_abpsp_input'.
Regards,
Srini.

Content Not Coming Properly after converting a Smartform to PDF.

I am converting a smartform into PDF format using CONVERT_OTF .
This smart form will be triggered from the portal at the occurance of an event .After Conversion some texts are properly outputted in the PDF but some texts which are in arabic are not coming properly ( shows some junk data in a language other than Arabic).
Can any give a Solution ??
Thanks
Chaitanya Sharma
Edited by: chaitanya sharma on Jan 28, 2009 2:15 PM

hi
try using this fm CONVERT_OTF_2_PDF
hope this helps
regards
Aakash Banga

Theme not coming properly

Hi Experts,
We are having Federated Portal and the custom theme XYZ is developed in Consumer Portal. The ESS/MSS iviews are linked through Remote Role Assignment from Producer portal.
The theme is not coming properly. From Mashead to Top level navigation the theme XYZ is coming correctly but when I opens the page having iviews then the iView Tray is showing the SAP Standard theme and the content in the iView is sometimes taking correct XYZ theme.
I have cleared Federated cache, navigation cache and also cookies, but still it is not coming properly.
When I view source iView then
<html><head><LINK REL=stylesheet HREF="/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/sap_standard/prtl_std/prtl_std_ie6.css?7.1.6.0.0">
Please suggest.
Regards,
Deep

Try by re-starting the portal.
This is rarely necessary when dealing with the SAP Portal theme.
The advice from Sushil looks more like the solution as it is common to not upload the consumer portal theme in the producer portal. Because in an FPN the producer theme will be used when the consumer theme isn't found:
[SAP Note 880482|https://service.sap.com/sap/support/notes/880482]
http://help.sap.com/saphelp_nw04s/helpdata/en/5b/9f2d4293825333e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/46/06f6dc000a5a68e10000000a1553f7/content.htm
"If you are using custom made themes or have modified any of the out-of-the-box themes on the consumer portal, an administrator must manually import these themes to the producer portal. "
Next source of problems with themes is when your consumer and producer are on a different version (specifically when the producer is on a higher SPS or EHP) even when the consumer theme was imported into the producer.
br,
Tobias

Smart form -Right Alignment is not coming properly

Hi Folks,
While Printing Smart form for Invoice ,using right aligned Paragraphs texts are not coming properly.....but using left aligned paragraphs text are coming proporly....we want both left aligned and right aligned in same table ...for print preview it showing fine but while taking the print out it comes like this
for eg: ---
Net amount
1,000.00
      750.00
2,000.00
        40.00
      100.00
      300.00
30,000.00
O/P showing like this ....i have checked all the options in right aligned paragraph but no use
Kindly help ....
Edited by: bismilpk on Dec 26, 2010 2:31 PM

yes .....I solved....got the answer

Return order value is not coming properly

Hi All,
In Export Pricing Procedure we manually enter value for Freight and Insurance.For both condition types in V/06 we have maintained Fixed Amount in Calculation Type.So in the sales order condition screen Pricing is like
Ordered Qty 10 pc
Price         USD 100 (Entered manually)
Freight      USD 10 ( entered manually)
Insurance USD 20 (entered manually)
Total order Value is USD 120.Here price per item is 12 USD
Now when we create a return order for 5 pc wrt above invoice, Freight and Insurance is not calculated properly.
The system is calculating like
Price         USD 50
Freight      USD 10
Insurance USD 10
Total Credit Memo/returm order amount is 70 USD.And return price/item is 14 USD.
Here the system calculate Freight and Insurance value by dividing the original value(10 USD 0r 20 USD / return qty.(5pc).
But in the above process the return order value should come 60 USD.So what settings do we need to get the value 60 USD.
Regards
Debasish

Dear Raj,
Thanks for the reply.I am giving you a brief idea abt the PP and condition types.(For Freight and Insurance ).
For Freight condition type
condition class A
calculation type B
Condition Category F
No Access sequence is assigned
For Insurance Condition Type
Condition class A
Calculation Type B
Condition Category C
No Access sequence is assigned
In PP for both my condition types manual, mandatory and statistics has not been checked.No From To step is maintained.
Coming to your query can you pls elaborate how did u calculate Freight 2 + insurance 4 and the final value should be 56 usd.
Now in my first invoice the invoiced qty was 10 . Freight value was 10 and Insurance value was 10(for the total invoiced qty).
Now when i create return order for 5 qty the system should calculate proportionately.I mean Insurance value should be 5 usd and freight value should be 5 usd.So price is (for 5 qty) 50 usd + Insurance 5 usd + freight 5 usd= 60 usd
If i am wrong then pls correct me.
Regards
Debasish

Invoice output not coming properly

Dear Experts,
I have maintained condition record for the billing type and assigned it to the printer. Some of the invoices output are coming properly but for 4 to 5 invoices, print out prview is just skipping and when I click for printing, the system throws an error " output could not be issued" and the error is in green colour. I am not able to understand the reason behind it.
Can anybody help me out to solve the issue please.
Thanks & Regards,
Reji

Dear Reji,
T. Code: VF02/ VF03
Key-in your Invoice No. and Don't hit "enter".
On to the same Page, from Menu-bar, Click: Billing Document --> Issue Output to
A Window: Output Output, will pop-up.
Here, select the Output-line and Click Icon: Print Preview
Now, you would able to see Invoice Preview, providing Output Condition record is maintained.
If still, Invoice Preview doesn't appear, on to the same window: Output Output, Click Tab: Print Options.
Another Window will pop-up. Here, maintain Output Device (say, LP01) and tick Box: Print Immediately, and OK.
Again Select Output line and Click: Print Preview.
Best Regards,
Amit

Base value and BED not coming in Excise Irem in MIGO

Dear all,
I created PO base value and basic Excise duty is calculating it is showing in tax pop up menu
but it is not coming in Goods receipt (MIGO) in Excise Item Tab
Base Value and BED
Please help
Manjunath

Hi ,
I maintained Excise Default
Account payable BED condition type -- JM01
BED Percentage condition -
16 ( Number )
It is upgraded 4.7 t0 Ecc 6
BED Percentage condition it is given as 16 number but if i changed this, In PO tax Popup menu is not coming
I change ---JMX1   it not coming in MIGO also
I cant understand what is this 16 number   i want to known it is program or had code ......
J1ID as different percentage
Manjunath

Incorrect Condition Values when billing multiple deliveries

Hi all.
Ok this is a new one on me, when i bill using VF01 and enter multiple deliveries in (2) then second billing document (2 are created) that is created has some condition values that differ from the first, i must add it the same material, condition values, qty and ship to on the deliveries, also the deliveries are NOT reference to a sales order.
But when you create each delivery as a single billing document all is ok.
Any initial ideas?
Just better add this is a density calulation as we use the F&A pricing for these billing docs.
Regards
Steve
Edited by: Steve Cane on Mar 31, 2009 10:16 AM

Hello steve,
some possibilities
some of the conditions may be group conditions and hence the base is the cumulative of both the conditions
copy control from delivery to invoice may be to redtermine the scales and hence it may be updating when together
hope this helps
Thanks
akasha

Logo is not coming properly while mailing the script

this is my code..
m converting script output to pdf and sending as attachment... my pdf conatains LOGO.. when i received the mail,text is coming properly but LOGO is not getting printed properly..
pls suggest any solution to this...
thanking u in advance...
*& Report ZZGBTEST_PDF
REPORT ZZGBTEST_PDF.
TABLES: PA0105.
DATA: LF_FM_NAME TYPE RS38L_FNAM.
DATA: WA_CTRLOP TYPE SSFCTRLOP,
      WA_OUTOPT TYPE SSFCOMPOP,
      WA_STXH LIKE STXH.
DATA: T_OTFDATA TYPE SSFCRESCL,
      T_PDF_TAB LIKE TLINE OCCURS 0 WITH HEADER LINE,
      T_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA : T_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
       W_FILESIZE TYPE I,
       W_BIN_FILESIZE TYPE I.
*OBJECTS TO SEND MAIL.
DATA : I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
        I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        I_OBJBIN LIKE SOLIX OCCURS 0 WITH HEADER LINE,
        I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
        I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        W_OBJHEAD TYPE SOLI_TAB,
        W_DOC_CHNG TYPE SODOCCHGI1,
        W_BUFFER TYPe STRING. "TO CONVERT FROM 132 TO 255.
DATA : V_LINES_TXT TYPE I,
       V_LINES_BIN TYPE I.
SELECTION-SCREEN BEGIN OF BLOCK SCR WITH FRAME TITLE TEXT-900.
SELECT-OPTIONS: MAILTO FOR PA0105-USRID_LONG NO INTERVALS.
PARAMETERS : WDATE LIKE SY-DATUM DEFAULT SY-DATUM,
               TESTRUN AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK SCR.
DATA: DATAB TYPE TABLE OF ITCOO WITH HEADER LINE,
      PDFTAB TYPE TABLE OF TLINE WITH HEADER LINE,
      BINFILESIZE TYPE I.
DATA: FNAME TYPE STRING,
      FPATH TYPE STRING,
      FULL_PATH TYPE STRING.
DATA: STRUCT TYPE ITCPO.
START-OF-SELECTION.
WA_CTRLOP-GETOTF = 'X'.
WA_CTRLOP-NO_DIALOG = 'X'.
WA_OUTOPT-TDNOPREV = 'X'.
STRUCT-TDDEST   = 'LP01'.
STRUCT-TDNOPREV = 'X'.
STRUCT-TDGETOTF = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
   DEVICE                            = 'PRINTER'
   DIALOG                            = SPACE
   FORM                              = 'ZGBTEST'
   LANGUAGE                          = SY-LANGU
   OPTIONS                           = STRUCT
EXCEPTIONS
   CANCELED                          = 1
   DEVICE                            = 2
   FORM                              = 3
   OPTIONS                           = 4
   UNCLOSED                          = 5
   MAIL_OPTIONS                      = 6
   ARCHIVE_ERROR                     = 7
   INVALID_FAX_NUMBER                = 8
   MORE_PARAMS_NEEDED_IN_BATCH       = 9
   SPOOL_ERROR                       = 10
   CODEPAGE                          = 11
   OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'MAIN'
   WINDOW                         = 'MAIN'
IMPORTING
PENDING_LINES                  =
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'
TABLES
   OTFDATA                        = DATAB[]
EXCEPTIONS
   UNOPENED                       = 1
   BAD_PAGEFORMAT_FOR_PRINT       = 2
   SEND_ERROR                     = 3
   SPOOL_ERROR                    = 4
   CODEPAGE                       = 5
   OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF..
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   FORMAT                      = 'PDF'
IMPORTING
   BIN_FILESIZE                = BINFILESIZE
TABLES
    OTF                         = DATAB[]
    LINES                       = T_PDF_TAB[]
EXCEPTIONS
   ERR_MAX_LINEWIDTH           = 1
   ERR_FORMAT                  = 2
   ERR_CONV_NOT_POSSIBLE       = 3
   ERR_BAD_OTF                 = 4
   OTHERS                      = 5
IF SY-SUBRC EQ 0.
MESSAGE 'SCRIPT SUCCESSFULLY CONVERT IN TO PDF' TYPE 'I'.
ENDIF.
LOOP AT T_PDF_TAB.
REPLACING SPACE BY ~
    TRANSLATE T_PDF_TAB USING ' ~'.
    CONCATENATE W_BUFFER T_PDF_TAB INTO W_BUFFER.
ENDLOOP.
REPLACING ~ BY SPACE
TRANSLATE W_BUFFER USING '~ '.
DO.
    I_RECORD = W_BUFFER.
APPENDING 255 CHARACTERS AS A RECORD
    APPEND I_RECORD.
    SHIFT W_BUFFER LEFT BY 255 PLACES.
    IF W_BUFFER IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
REFRESH : I_RECLIST, I_OBJTXT, I_OBJBIN, I_OBJPACK.
CLEAR W_OBJHEAD.
OBJECT WITH PDF.
I_OBJBIN[] = I_RECORD[].
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
MAIL TEXT TO BE FILLED UP HERE
SELECT SINGLE TDID TDSPRAS TDNAME TDOBJECT FROM STXH INTO
CORRESPONDING FIELDS OF WA_STXH
    WHERE TDOBJECT ='TEXT' AND TDNAME = 'ZGBTEST'.
IF SY-SUBRC = 0.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
       CLIENT                        = SY-MANDT
        ID                            = WA_STXH-TDID
        LANGUAGE                      = WA_STXH-TDSPRAS
        NAME                          = WA_STXH-TDNAME
        OBJECT                        = WA_STXH-TDOBJECT
      TABLES
        LINES                         = T_LINE.
    LOOP AT T_LINE.
      I_OBJTXT = T_LINE-TDLINE.
      APPEND I_OBJTXT.
    ENDLOOP.
ENDIF.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
DOCUMENT INFORMATION.
W_DOC_CHNG-OBJ_NAME = 'FORM'.
W_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
W_DOC_CHNG-SENSITIVTY = 'F'. "FUNCTIONAL OBJECT
W_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
PACK TO MAIN BODY AS RAW.
OBJ. TO BE TRANSPORTED NOT IN BINARY FORM
CLEAR I_OBJPACK-TRANSF_BIN.
START LINE OF OBJECT HEADER IN TRANSPORT PACKET
I_OBJPACK-HEAD_START = 1.
NUMBER OF LINES OF AN OBJECT HEADER IN OBJECT PACKET
I_OBJPACK-HEAD_NUM = 0.
START LINE OF OBJECT CONTENTS IN AN OBJECT PACKET
I_OBJPACK-BODY_START = 1.
NUMBER OF LINES OF THE OBJECT CONTENTS IN AN OBJECT PACKET
I_OBJPACK-BODY_NUM = V_LINES_TXT.
CODE FOR DOCUMENT CLASS
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
PACKING AS PDF.
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 1.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'FORM'.
I_OBJPACK-OBJ_DESCR = 'temp.PDF'.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255.
APPEND I_OBJPACK.
DOCUMENT INFORMATION.
CLEAR I_RECLIST.
CLEAR I_RECLIST[].
E-MAIL RECEIVERS.
LOOP AT MAILTO.
I_RECLIST-RECEIVER = MAILTO-LOW.
I_RECLIST-EXPRESS = 'X'.
I_RECLIST-REC_TYPE = 'U'. "INTERNET ADDRESS
APPEND I_RECLIST.
ENDLOOP.
SENDING MAIL.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = W_DOC_CHNG
      PUT_IN_OUTBOX              = 'X'
      COMMIT_WORK                = 'X'
    TABLES
      PACKING_LIST               = I_OBJPACK
      OBJECT_HEADER              = W_OBJHEAD
      CONTENTS_HEX               = I_OBJBIN
      CONTENTS_TXT               = I_OBJTXT
      RECEIVERS                  = I_RECLIST
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      DOCUMENT_TYPE_NOT_EXIST    = 3
      OPERATION_NO_AUTHORIZATION = 4
      PARAMETER_ERROR            = 5
      X_ERROR                    = 6
      ENQUEUE_ERROR              = 7
      OTHERS                     = 8.
IF SY-SUBRC = 0.
    WRITE :/ 'MAIL SENT SUCCESSFULLY...'.
ENDIF.
*CALL METHOD cl_gui_frontend_services=>FILE_SAVE_DIALOG
CHANGING
     FILENAME = FNAME
     PATH = FPATH
     FULLPATH = FULL_PATH.
*CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
   BIN_FILESIZE                    = BINFILESIZE
   FILENAME                        = FULL_PATH
   FILETYPE                        = 'BIN'
TABLES
   DATA_TAB                        = PDFTAB[]
FIELDNAMES                      =
EXCEPTIONS
FILE_WRITE_ERROR                = 1
NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER         = 3
INVALID_TYPE                    = 4
NO_AUTHORITY                    = 5
UNKNOWN_ERROR                   = 6
HEADER_NOT_ALLOWED              = 7
SEPARATOR_NOT_ALLOWED           = 8
FILESIZE_NOT_ALLOWED            = 9
HEADER_TOO_LONG                 = 10
DP_ERROR_CREATE                 = 11
DP_ERROR_SEND                   = 12
DP_ERROR_WRITE                  = 13
UNKNOWN_DP_ERROR                = 14
ACCESS_DENIED                   = 15
DP_OUT_OF_MEMORY                = 16
DISK_FULL                       = 17
DP_TIMEOUT                      = 18
FILE_NOT_FOUND                  = 19
DATAPROVIDER_EXCEPTION          = 20
CONTROL_FLUSH_ERROR             = 21
OTHERS                          = 22
*IF SY-SUBRC <> 0.
MESSAGE 'Error !!!' TYPE 'E'.
*ELSE.
MESSAGE 'PDF FILE SUCCESSFULLY DOWNLOADED ...!!!' TYPE 'I'.
*ENDIF.

Hi Sagar,
In scripts when you will see print preview the logo will be not shown up with clarity.Take the print out of the document and check whether logo is printing up with clarity.
Thanks
Phani

DATA not coming properly

Hi ,
I have a customized report which uses the logical databse PSJ. It has project, wbs element(prps-posid) in the selection screen. When I give input to the project , the output is coming properly with the field(WBS element), but when I give the output WBS element as input in the field , it is retrieving some more data . I went into debugging and found that while retrieving posid from prps table , it is retrieving the value '############' due to which the output has more than the records that should be . Anyone has come across this scenario, please reply .
Thanks in advance.

I assume that the change is present in the PSA. If so is it just one field that is changing or multiple fields. ?
Also make sure the PSA is empty before loading.
Asif

Delivery date is not coming properly in PO Printout

Hi,
I have a problem in PO Printout that Delivery date is not coming properlyu2026In my PO, there are 5 line items.
If the Delivery date of all line items are same like 01.04.2009, then Delivery date should be shown 01.04.2009 in PO printout.. IT IS COMING RIGHT.
But if the Delivery Date of all line items are different like 01.04.2009, 02.04.2009, 03.04.2009, 04.04.2009 and 05.04.2009. Then Delivery Date should be shown with the each line items in PO print out. THIS IS NOT SHOWING IN MY PO PRINT OUT.
Please tell me what is the problem. Why not coming Delivery date with each line items???
Regardsu2026

currently i dont have SAP installed with this system, so i just suggesting you some thing.
goto tcode: nace.
select your output type. check the processing routines. check the smartform and processing routines attached to it. and see how the field is getting populated and what fields are being passed there.

The Condition value formula is not found in CRM ???

Hello Al
l
We are working on CRM 7.0 , I canu2019t find the Condition Value Formula, Condition Base Formula and Condition u201Crequirementsu201D in the pricing procedures downloaded from the ECC also in the pricing procedures that are standard in the CRM
I donu2019t know what is the reason for that
Regards
Jacopo Françoise

the IPC should work to make them available

Smartforms Printing not coming properly in dot matrix printer

Hi Gurus,
We have implemented invoice printout using smartforms and required to use the dot matrix printer for printing.
We are now facing the problem on the printout from dot matrix is different from the preview we get in the system. But the printout from Laser Jet is coming out correctly for the same smartforms.
We are using EPSON DLQ3000 and we configure the output device using EPESCP2 as the Device Type. The problem is font size of the print out is all printed as courier size 12, but there are different font sizes in the smartforms.
But when we use local printing (using SAPLPD), there is no problem, all different font size is printed.
If we using to same output device to print some sapscript, everything is working well. Font size will print accordingly to the preview of the sapscript.
Do you have any idea of the problem that we have. Thanks for your help.
Regards,
Lee Shi

Dear Lee,
Ideally the printout should come as it is shown in the preview.I remember once it had happened with me too.But in my case there is no problem with the settings at SAP level.When we checked we found the problem is with the printer cartridge.
We co-ordinated with the system administrator and n/w guys.They in turn change the cartridge and issue was fixed.
PS:In my case all SAP printout were coming properly except the smartforms.
Regards,
Ashutosh
Edited by: ashutosh singh on Aug 18, 2008 10:20 AM

BP Details not coming properly in BP search results for editing

Hi,
Can anyone help me to solve the below issue.
When i tried to search the BP for editing in IC WEB UI(7.0 ehp 1 version) by using the accounts & products, and a/c management work centers in IC AGENT business role i am not getting the complete BP details in the search option like all the assignment blocks are not coming.
But when i tried to search the BP for editing by using the SERVICEPRO & SALESPRO business role i am able to get the full details of the BP.
Can anyone help me why the BP details are not coming for search criteria in IC AGENT Business role.Is ther any customizing settings i missed out.
Thanks in advance
Regards
Nagaraju

Hi Nagaraju,
This would be because only restricted view is provided to IC Agent when compared other roles.
You can check the view configuration.
Regards
Leon

Condition value in billing not coming properly.

Similar Messages

Maybe you are looking for