Condition value is Inactive in sales order

Hi Friends,
I am facing the following problem,
In the sales order, it is picking all condition records as per pricing procedure and calculates perfectly. But in the header net value field it is not updating. It is showing one condition record value only.
During analysis I found that the all records is inactive except which one is updating in the net value field and reason is "Y - Inactive because of Subsequent Price."
Please help me to solve this issue.
Thanks in Advance.
Dilip

Dear Dilip
For information, when you have a condition record showing as
inactive it is because you have a base price condition record
somewhere below your discounts.
Check your condition records below the discounts, are
there any of condition class 'B'? If yes, then that is why they are inactive.
thanks
G. Lakshmipathi

Similar Messages

Statistic condition values not updated during Sales order Settlement

Hi,
In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
For this purpose we have created one COPA Assessment Cycle. Tracing factor is Sales Revenue and receiver is Materials.
In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
For this reason we have created one new statistic condition type, what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
So is it possible update during sales order settlement time statistic condition values.
Please give me suggestion.
Regards,
Thiru

Hi Ajay Sir,
As you said is correct.
But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field. System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
Please suggest me is there any alternative.
Regards,
Thirumalesh .

Can I have mannual condition value as zero in Sales order

Hi
I need to enter a mannual condition type in sales order in %, but it should not give me any value and it should be zero. In Pricing procedure I haven't maintained any values in from & to column, but then it is taking the value either from the base price or from some other value. Can any one tell me how to control this....and get zero as value in sale order though I enter in %.
Regards,
Ragu

Hi,
What is the function of the condition type if its effect is not to be evaluated in the pricing screen.
anyways if thats the case, in the pricing procedure you can specify the counter no. in the from and to fields related to the condition type.
you can enter the counter no. of the base price on which you want the percentage of the particular condition type to be executed.
hope it would solve your problem.
regards,
Siddharth.

How to Update the New Condition values for list of sales orders

Hi
Client requirement is they have set of old Sales Orders to be executed. But the material prices have been revised in the meantime. Now they want to update the current prices in the sales order before proceeding further.

Hi,
Though Lakshmi suggested you the right option, it may not be carried out for Sales Documents in random and will be much suited for Sales Documents with continuous sequence like 00010, 00011, 00012, 00013, etc.
If you want to New Pricing to be carried out for Specific Lists of documents like 00010, 00017, 00043, 00057, etc, then you can do by following option:
Go to Transaction "MASS", Select the Table - VBAK and Field - PRSTD and proceed by entering the Sales Documents Lists to carry out New Pricing.
Hope this will be helpful to you.
Rgds,

Condition Value(KONV-KWERT) for Sales Order

Hi Experts,
I have to print the condition value for ZTDC Condition Type from Header Value, currently it is getting the data from line item level. I am getting condition no document (KNUMV) from VBAK table and checking that condition no document in KONV table to retrieve the Condition Value(KWERT) but it is picking item level data.
We need to get the condition value for the header level.
Please help me.
Points will be rewarded for useful answer.
Thanks,
Vinay.

Hi!
Try using table KONP (condition at position level) and KONH (condition at header level).
Regards
Tamá

Header condition type value not displayed in sales order output

Hi gurus,
I have observed a strange issue regarding a header condition in a sales order.
we have a set up like following:
1. If the Header condition XXXX is used in sales Order then this value should be printed on sales order output.
2. If the Header condition mentioned in above point is not maintained in sales order it should print the total price of all line items.
Though i have maintained the header condition value in Sales Order Header its not displayed in SO output.
That is , I have a sales order and it has one HEADER condition type entered with 3500 USD.
In fact this value is used for some business purpose and is being printed on the sales order output for a specific output type.
But where as in a sales order this header condition value is not getting printed on the output though I am using same data as of the sales order which is having the header condition value printed on its output.
According to business,we must have the header condition value printed on sales Order output.
Please suggest how to proceed.
Thanks in advance.

Not sure if you are using costom smartform to print invoice, if yes then ask developer to debug and find the root cause and fix it.
You might need to give him condition when it shuld be printed and when not.
You can take reference of another output type for which it is printing

New Condition Table not working in Sales order

Dear All,
I am facing problem in pricing procedure. I have created new condition table(LIFNR & ROUTE), included Vendor(Fwd Agent) and Route in condition table with sales area. I have added that condition table in access sequence and assigned access sequence to condition type. Then Condition type added into pricing procedure and assigned pricing procedure to document type.
In sales order I've added route and fwd agent but while checking in analysis system does not determine route and fwd agent.
Thanks and Regards,
Kaushal

hi,
i have a query to ask why you need LIFNR in condition table creation.
where in sales order it will trigger automatically.
please check the config settings for route determiantion automatically.
so that if route comes automatically into the sales order then from where you will trigger LIFNR.
please clarify.
regards,
balajia.

Condition type not coming in sales order

Hi,
we have a condition type Z026. The issue is that it is not set in the order but the condition records exists. The pricing analysis shows that condition reocrd is missing but the fact is the condition record is there. The acess seq is Z026 and there are many tables in the acess sequence.
The first table in the access seq is 906 and the condition record exists but still the system says that the condition record is not found using cond preliminary step (header fields like customer/sales org/div). the cond record is maintained for relevant sales org/dist channel/customer/material. cond preliminary step means that system first looks for the header fields but everything is there.
The condition is active and the conditon is created on 21.7.10 with validitity from 21.7.10 to 31.1.2010 and the pricing date in sales order is 27.7.10. so everyhting is fine but yet the condition is not coming in sales order
what could be the issue.
regds

Hi,
Now try creating a sales order with 20.07.2010 as the pricing date. It will work. Create another order with 21.07.2010 and it will not work. If so, it is due to the validity date. When you give 21.07.2010 as validity date and there is already another record which was valid on that date, the gap of one day can happen and we have experienced this. There is even an OSS note explaining this concept, which makes sense business-wise.
However you check the scenarios I have mentioned. If the behaviour is as I have mentioned, then you have to change the pricing date of your problamatic sales order to one day earlier, or move the validity date one day earlier.
If the behaviour is different, pls lemme know

Condition records wrongly populated in sales order instead of billing doc.

condition records are maintained billing wise to populate in the billing document for pricing condition where as while creating the sales order itself i am getting the condition records populated in the sales order which is not correct as it needs to populated in the billing document only

yes after looking at pricing analysis itself we have concluded that these condition type has the key combination billing document F2 and displays the condition record within the sales order itself, but this condition record with key combination billing doc. F2 should be populated in billing doc only what is the reason behind this

Material Assessable value in Purchase and Sales order.

Dear Experts ,
Case A : How Can we pass on material assessable value from PO to Sales order when Assessable value varies dynamically from one vendor to another vendor for same material.
For Example :
Let say we are procuring material X , Quantity 1 from Vendor A at the cost of Rs.1000 and the excise duty on the same will be 10% i.e 100 Rs.
Same material X procured , quantity 1 from Vendor B at the cost of Rs.2000 and the excise duty on the same will be 10% i.e 200 Rs.
Now when I create a sales order for two quantity for material X and SP is 5000 Rs. So which value I have to base on for calculating excise Duty and how can we justify for two quantities.
Case B : I have been to J1id screen and there we can maintain one assessable value but in actual Assessable value is getting varied and using this technique how can we make sure that , Particular vendor stock which is holding XXX and YYY assessable value stock to be picked in sales order.
Request you all to advice me on the above mentioned requirement.
Warm regards
Vijay

hi
based on my knowledge , your process is job work process, in job work process maintain the this flow,
first case : please check your sale order customer details , because on one vendor can assign to your customer ,
goto xd02 , check general data- at control tab, here assign vendor, based on you requirement ,
will take vendor A stock , you assign vendor for you sale customer,
and you want vendor B STOCK , you can assign for vendor to your sale order customer,
and also check you vendor details(XK03) , their is any customer,
CASE2: TAKE yyy stock it means ( the second vendor it can assign you customer), in j1id you maintain the material assemble value , based on date please check, and also check , in j1id at material and chapter id based , based on you material and chapter id combination , it activate subcontr's icon check ,
so please check you xd02 for vendor, xk03 for customer , j1id assemble value material chapter id subcontr's icon ,
please try

New condition in pricing procedure in Sales Order

Dear SAP Gurus,
I want to add one new condition in pricing procedure in Sales Order.
Earlier we were having following conditions.
PR00   (price)                           1000 Rs     (say)
MWST                                     100%    sub cond.
ZSER (service tax)                   12%
ZSRT                                       100% sub cond on ZSER
ZEDU    (Education tax)             3%(on ZSER)
ZEDT                                        100% sub cond on ZEDU
Now I want the structure to be
PR00   (price)                           1000 Rs     (say)
MWST                                     100%    sub cond.
ZSER (service tax)                   12%
ZSRT                                       100% sub cond on ZSER
ZEDU (Education tax)               2% (on ZSER)
ZEDT                                        100% sub cond on ZEDU
ZHED (Higher Edu. Tax)             1% (on ZSER)
ZHET                                        100% sub cond on ZHED
For this I have Done following Customizings
Created new Condition Types (ZHED & ZHET ) by Coping from ZEDU and ZHET respectively.
Maintained pricing procedure with these conditions.
Made condition Record for ZHET through VK11.
But I am not able to set ZHED as 1 %
Please guide where to configure this and how ?
Thanks & Regards
Rajesh

Hello,
Have you maintined the calculation type of the condition type ZHED as A - Percentage ? If no, then maintain the same. If it is already maintained, then let us the error when you are trying to maintain the condition record as 1%.
Prase

Fright condition & value sholud appear in purchase order printout

Dear Sir,
I have made a smartform for purchase order , i want to add fright condition in purchase condition , now my client want this condition value should appear in purchase order printout aginst fright condition,
What setting i have to do in MM confrigartion for doing this , and also what changes should ABAP do in smartform so this condition should appear and its value.
thanks & regards
Shailendra

Hi
In pricing procedure against this freight condition type select/tick print
then only abaper can make appear in print
Functinal speciciation for Abaper need to give as
1. SE11 - EKKO u2013 contents- PO number, take doc. condition no.
2. SE11 - KONV u2013 contents - doc. condition no.
3. Take condition value against condition type "FREIGHT" & Item no.
Raju

What are required feilds values for creating a sales order using va01?

What are required feilds values for creating a sales order using va01?
Please give examples if possible.

Hi,
go through this URL:
<a href="http://web.mit.edu/cao/www/SB2002/CR/VA01.htm">http://web.mit.edu/cao/www/SB2002/CR/VA01.htm</a>
Hope this will help you.
Thanks
Shiva

VPRS condition not floating in to sales order...

Good evening every body...
My query is VPRS condition not floating in to sales order...
Please give your valuable inputs
I checked Pricing procedure analysis
giving error requirement 004 not fulfilled
Note:
I checked determine cost in Item category (TAN)
VPRS condition in my pricing procedure
I maintained Standard price in Accounting1 tab of MMR
Valuation class I maintained in MMR
VPRS condition type I maintain condition category-"G"
Anything I missed out???
Regards,
Krishna

In my view, the information provided by you is not sufficient to provide you an exact solution.
As based on & differs business scenario to business scenario you are following.
Like whether it is BOM, MTO/MTS, Free Goods, batches, third party sales, Order-related billing or Delivery-related billing:...
Business Process
Source of costing
- Order-related billing
Valuation price of the material master
- Delivery-related billing
Goods issue
Further there are various way to carry out costing at Sales order, like
- Product costing
- Unit costing
So, you can check whether EK01/EK02 or any other cost related is executing prior/take preference to VPRS in your pricing
Also. kindly check your entries for Account Determination for valuation area(T001K) by using TCode OMWD.
If everything is fine, then test run a Sales cycle till Billing, so as to see whether at billing VPRS is reflecting or not.
If in case you need further assistance, do let us know.
Regards
JP

Condition type value not update in sales order

Hello Guru's
As per the sales order in VA01 the condition type value i.e surcharge value is not updating in sales order.
But I have maintain the condition record(Surcharge)also and in Condition technique I have checked every thing is correct .
please find below I have attached the Screen short .
Please give me solution Asap.

Hi Sukdev,
Have you checked the respective pricing procedure for From and To reference step maintained against the condition type ZSUR?
Regards,
T.R.S.Praveen

Condition value is Inactive in sales order

Similar Messages

Maybe you are looking for