Conditional Alerting For Servers and Network Device

We have a management server here in the states with sites across the pond with servers there as well. All servers point back to the sole management server.
I have setup a subscription on Failed to Connect to Computer with a 90 second threshold. The problem is if the VPN between sites goes down we get alerts on all the servers being down.
Is it possible to setup a condition that if the VPN does go down, do not generate "Failed to Connect to Computer" alerts on those servers?
Environment is SCOM 2012 R2

I moved this over to the Authoring forum for you - might be a better place to get more feedback.
Basically, what needs to be done (from an authoring perspective) is a diagnostic task could first check if the servers are on the particular network (like on your VPN network). Do not set state to critical if the VPN link is unavailable. Do set state to
critical if the VPN link is available, but server is not.
If you have orchestrator, there may be other options...
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Similar Messages

Condition type for landing and clearing charges for imports

All SAP Gurus,
Which standard condition type to be for Condition type for landing and clearing charges for imports?
Regards,

If both Condition types are Quantity basis then you can Create New Condition types by Referring FRA1 & FRC1 Condition types.
Else Create New Condition types called ZCCH for Clearing Charges by giving the Following inputs:
Condition class A
Calculation Type A
Condition Category B
Plus/Minus A
Also in Control data Check Accruals option and in Scales tab give Scale Value as 2 if want.
Create New Condition types called ZLNC for Landing Charges by giving the Following inputs:
Condition class A
Calculation Type A
Plus/Minus A
Uncheck Accruals options and save.
Regards,
Ashok

When will the bluetooth support audio alerts for email and text messages?

When will the bluetooth support audio alerts for email and text messages? It works when I get a phone call, but I'd like it to work when getting a text message (I do this a lot in noisier areas and would rather not have to look at the phone every few minutes)
Or is there a configuration option I'm missing?

Answered in this thread:
http://forums.adobe.com/thread/1393642?tstart=0

My share operation failure occurs after about 5 seconds for DVD and Apple Devices. I can share to a master file, but without audio. Help?

My share operation failure occurs after about 5 seconds for DVD and Apple Devices. I can share to a master file, but without audio. Help?
It has error number -50.

If it only happens with this project, it's probable some media files have become corrupted.
Those may be render files. Make sure background rendering is off. Select the project in the browser and from the file menu, choose Delete Project Render Files; choose All from the dialog. Without rendering,try exporting.
If that doesn't work, use an optimized version of your DSLR clips. (Right click on the clips in the browser and hit Transcode.)
Russ

Cisco ACS 4.2.1.15 for Windows and Network Access Profiles

We are attempting to configure ACS 4.2.1.15 on Windows Server 2008 Member Server. Initially I only have the need to authenticate Network Admins for device administration and authenticate Windows AD groups using PEAP authentication. The general problem that I am having is that if I configure a Cisco 1200 Access Point for PEAP and also setup The Access Point for Radius authentication pointed to the ACS server it always maps to the the first Network Access Profile and rather than it trying the second it will error sayiing some condition is not met depending on what changes I make. Can someone tell me what the criteria that is used to determine what NAP is used? According to the manual if all 4 criteria are not met then the Profile will not apply.
I am using one ACS group that is mapped to an AD group for Wireless Access and a Second ACS group mapped to an AD group that includes the Net Admins. This group mapping appers to be working as the user group name seems to mapped correctly in the logs. In short I have tried only configuring the Wireless NAP to only Allow EAP authentication using PEAP EAP-MSCHAPv2 and the Netadmins profile to include all protocols. Bascially what happens is if I have the Wireless NAP first it works fine for PEAP authentication on Wireless but if I try to administer the access point and provide credentials I get a message in the failed log that the authentication profile is not allowed in this Network Access Profile. Why does this not just go onto the next Network Access profile?
I am familiar with version 3.2 but it does not seem to work the same.
Any help would be appreciated on what I am missing.
Thanks

Hi Surenda,
Thanks for your reply. Nop, there is no WLC yet, but the WLC will be installed shortly.
Thanks,
Jean Paul

IPad mini will not alert for skype and facetime calls. Everything is on. This started after one of the updates after ios 7.

HHow many times do I have to write this?!?
ipad mini will not alert for facetime or skype calls. Yes everything is on. No, mute is not on. Fed up!

Hello, pleaseacceptthisalias.
Thank you for visiting Apple Support Communities.
I would first start with forcing all applications to close and power cycle the device. Once this is done, have someone make a test call using these applications. If the issue persists, see the steps in the second article.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Troubleshooting notifications
Push notifications require an active Wi-Fi or cellular connection.
Note: Notifications use Wi-Fi only when a cellular connection is unavailable. Firewalls and proxy servers may affect your ability to receive notifications. For more information, see Unable to use Apple Push Notification service (APNs).
If you're not receiving notifications for a specific app, try these steps:
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notification Center to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
iOS: Understanding notifications
http://support.apple.com/kb/ht3576
Cheers,
Jason H.

My iPhone no longer gives me audible alerts for email and text messages. Just stopped. Help.

My iPhone just stopped giving me audible notifications for email and text messages. It still rings for calls. I have checked the settings for "Sounds" and they have not changed. However, in these settings when I try to change the sound I get only the vibration and not the sample sound. Can anyone help?

Hi Midwestboy,
If your iPhone isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Regards,
- Brenden

Different alerts for email and sms messages for a contact with custom ring tone

Hello,
I have a Curve 8530 with OS 5.0.0.395.
I have my default sound profile set up to play one type of alert sound when I receive and email message and another when I receive an SMS message (so I know the difference without looking at my phone). That works fine except for contacts that I also have a custom ring tone set up for. It seems that under the Custom Ring Tones/Alerts section of the contact there is only one entry for Messages and it applies to both email and SMS. If I have the contact's message alerts set to the alert I have for email, then their SMS messages play the same alert and I might think it's an email. Or if I have the messages alerts set to the SMS alert sound then their emails sound like SMS messages. Is there a way to have a custom ring tone set up for a contact but still allow their emails and SMS messgaes to follow the current sound profile's settings?
Thanks.

Hello,
Have you had any luck resolving this issue. I had a 8230 and this was possible. But like you I can get the 8530 to work. If you found the solution, please let me know.

Unable to caluclate cost in CJ20 for wbs and network level.

Hi All,
I have a query in the project Builder(CJ20N).
I created Project>WBS Elements>Network> and posted costs via assigning activity.
If I select an activity and go to edit>Costs, the "calculate costs" option is activated. ( I get "Message Costs were calculated: See menu Edit -> Costs -> Planned - Actual")
And also I am able to view the cost in Edit>Costs> Plan/Actual.. "Activity/Element". Please see the screenshots of Plan /actual comparison.
However if I select the WBS or Network and go to edit>Costs, the "calculate costs" option is disabled (frozen) and also in the same path Plan/Actual> "activity/Element" option is disabled (Frozen).
Request you to review the attached screenshot and advise is there any way to defreeze the option "calculate costs" and view the costs in WBS and Network level?

Hi,
why you want to see plan cost in project builder CJ20n? any specific reason please let us know...
every structure report having this kind of feather as CN41n/CNS41 then check these two report.
and lots of hierarchical report is there for seeking plant cost in project as Gokul suggested above.
so in project builder only plan VS actual cost can be look like by network activity.
Regards,
Sanjeev

Condition types for Insurance and Duties - Export sales

Hi Friends,
Please let me know the condition types i can make use of for capturing the Insurance and duties paid during export salesand also the condition type for capturing the commission.
Thanks
Ivy

Dear ivy
You can create zee condition types on your own and maintain the required datas. I am just give you one example for insurance.
Go to V/06, copy some standard discount condition type and rename it as ZEIN and maintain the following:-
Cond. class:::::::::::::::: A
Calculat.type::::::::::::::: A
Cond.category::::::::::::::C
Rounding rule::::::::::::::::Commercial
Plus/minus::::::::::::::::::::blank
Manual entries:::::::::::::::D
Amount/percent::::::::::::::X
Value::::::::::::::::::::::::::::X
In V/07, you can maintain the following tables
033:::::::::Incoterms
307::::::::Customer with Release Status
So in VK11, either you can maintain the insurance percentage for Incoterm or Customer, so that whenever you generate sales order with multiple line items, this condition will automatically bifurcate the insurance percentage. Also the most important is that in your pricing procedure, against this condition type, you have to assign EIN as Account Key.
thanks
G. Lakshmipathi

WebtoGo for laptop and mobile device - urgent

Hi,
I need to develop a web to Go application for both laptop and mobile device. The code which i generate for laptop should work on mobile device too.
ie the single application should work for both mobile and laptop devices.
Now coming to lightweight framework and small footprints what technologies should i use in J2EE.
If i use struts is that going to be mess in mobile device. Some one guide me here about choosing the technologies.
Thanks

our java app that we have just ported from PDA to laptop uses AWT components as these work on the PDA. need to go for what will work on the windows mobile device, abnd this may restrict you to older and less functional components.
NOTE platform is defined within the application on the server side (the name of the database on the client), and therefore you will need two applications in terms of oracle lite publications, so define the database name external to the code in some kind of a properties/config file

SCCM 2012 Antivirus Exclusions for Servers and Workstations

Hii,
Just sharing the antivirus exclusions for Configuration Manager 2012 Servers and workstations as well.
Please share if anything is missing.
McAfee Exclusion's for Configuration Manager 2012:
1. C:\Windows\TEMP\BootImages
and subfolders.
2. Directories:
%allusersprofile%\NTUser.pol
%systemroot%\system32\GroupPolicy\registry.pol
%windir%\Security\database\*.chk
%windir%\Security\database\*.edb
%windir%\Security\database\*.jrs
%windir%\Security\database\*.log
%windir%\Security\database\*.sdb
%windir%\SoftwareDistribution\Datastore\Datastore.edb
%windir%\SoftwareDistribution\Datastore\Logs\edb.chk
%windir%\SoftwareDistribution\Datastore\Logs\edb*.log
%windir%\SoftwareDistribution\Datastore\Logs\Edbres00001.jrs
%windir%\SoftwareDistribution\Datastore\Logs\Edbres00002.jrs
%windir%\SoftwareDistribution\Datastore\Logs\Res1.log
%windir%\SoftwareDistribution\Datastore\Logs\Res2.log
%windir%\SoftwareDistribution\Datastore\Logs\tmp.edb
%programfiles%\Microsoft Configuration Manager\Inboxes\*.*
%programfiles(x86)%\Microsoft Configuration Manager\Inboxes\*.*
%systemroot%\system32\GroupPolicy\Machine\registry.pol"
%systemroot%\system32\GroupPolicy\User\registry.pol"
\SCCMContentLib
\SMSPKG
\SMSPKGC$
\SMSPKGSIG
\SMSSIG$
\Program Files\SMS_CCM\ServiceData
\Program Files\SMS_CCM\Logs
\Program Files\Microsoft Configuration Manager\Logs
\Program Files\Microsoft Configuration Manager\Install.map
\ConfigurationManager DB
\SMSPKGSIG
\SCCMContentLib
\Sources
\SCCMImages
\DatabaseBackup
\SMSPKGE$
\SMSPKGSIG
\SMSSIG$
3. Processes that will be excluded:
Configuration Manager 2012 processes that will be excluded are:
Smsexec.exe
Ccmexec.exe
CmRcService.exe
Sitecomp.exe
Smswriter.exe
Smssqlbbkup.exe
4. SQL Server Exclusion's:
SQL Server 2012 Processes exclude from virus scanning
%ProgramFiles%\Microsoft SQL Server\MSSQL11. <InstanceName>\MSSQL\Binn\SQLServr.exe
%ProgramFiles%\Microsoft SQL Server\MSRS11. <InstanceName>\Reporting Services\ReportServer\Bin\ReportingServicesService.exe
%ProgramFiles%\Microsoft SQL Server\MSAS11. <InstanceName>\OLAP\Bin\MSMDSrv.exe
SQL Server data files
*.mdf
*.ldf
*.ndf
SQL Server backup files
     These files frequently have one of the following file-name extensions:
*.bak
*.trn
Full-Text catalog files
%Program Files%\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\FTData
Analysis Services backup files
     C:\Program Files\Microsoft SQL Server\MSSQL.X\OLAP\Backup
     C:\Program Files\Microsoft SQL Server\MSSQL.X\OLAP\Log
5. IIS Exclusions:
* .ida
%systemroot%\IIS Temporary Compressed Files
%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files
6. WSUS Exclusions:
*.cab
\WSUS\WSUSContent
\WSUS\UpdateServicesDBFiles
\SoftwareDistribution\Datastore
\SoftwareDistribution\Download
Reference Links:
https://community.mcafee.com/thread/59504
http://www.systemcenterblog.nl/2012/05/09/anti-virus-scan-exclusions-for-configuration-manager-2012/
http://social.technet.microsoft.com/wiki/contents/articles/953.microsoft-anti-virus-exclusion-list.aspx
http://support.microsoft.com/kb/309422
http://support.microsoft.com/kb/821749
http://support.microsoft.com/kb/817442
http://support.microsoft.com/kb/900638/en-us
http://technet.microsoft.com/en-us/library/dd939908(WS.10).aspx#av
McAfee Exclusions for workstations:
Turn off scanning of Windows Update or Automatic Update related files
Turn off scanning of the Windows Update or Automatic Update database file (Datastore.edb). This file is located in the following folder:
%windir%\SoftwareDistribution\Datastore
Turn off scanning of the log files that are located in the following folder:
%windir%\SoftwareDistribution\Datastore\Logs
Specifically, exclude the following files:
Res*.log
Edb*.jrs
Edb.chk
Tmp.edb
Turn off scanning of Windows Security files
Add the following files in the %windir%\Security\Database path of the exclusions list:
*.edb
*.sdb
*.log
*.chk
*.jrs
Turn off scanning of Group Policy related files
Group Policy user registry information. These files are located in the following folder:
%allusersprofile%\
Specifically, exclude the following file:
NTUser.pol
Group Policy client settings file. This file is located in the following folder:
%Systemroot%\System32\GroupPolicy\
Specifically, exclude the following file: Registry.pol
For the configuration manager clients the following exclusion will be added:
%windir%ccmcache
\SoftwareDistribution\Datastore
\SoftwareDistribution\Download
Reference Links:
http://support.microsoft.com/kb/822158/en-us
Regards, Syed Fahad Ali

Thanks for sharing this.. Many people will find this useful.
http://www.enhansoft.com/

Alerts for successful and unsuccessful RFC calls

Hi Experts,
I am creating Http to RFC scenario in which data is sent to RFC to create sales order.
I also need to create alerts for both successful and unsuccessful RFC calls.
How this can be achieved.
Thanks,
Vishal

Hi,
If you just want alerts for only the failures, then you can configure the generic alert in the Runtime workbench at the adapter level.
But if you want alerts for succesful RFC calls also, then you can use ccBPM.
YOu ccBPM will have a Block step.
Inside the Block step you can have your send step synchronous.
In the exception branch of the Block step, you can have a Control step which will trigger an alert.
And in the normal branch, you can check for the successful message using the response message from the send step , and use another control step to trigger an email
Regards,
Ravi

Can you get reoccurring alerts for text and email received?

Can you get reoccurring alerts for text, email an voicemail received? I am too dumb for my smartphone.......I have looked on the forums and cannot find an answer.
I just got my Droid Razr Maxx HD 2 weeks ago and so far I can only find that the "little" green LED light flashes when have a text, email, or voicemail. That light is pathetic..really I can barely see it?
Is there a way to make an audible alert the reoccurrs?
Thank you.

You may want to search for an app in Google Play.

Accessing servers and network from home

I am a computer teacher and would like to know if it is possible to access our server and network from my home. I am the administrator. We use the xserve raid and I have 4 of them. I do have remote desktop as well. Thanks in advance for your help.

Hi mrsraz-
One way is through ARD: About Apple Remote Desktop 3.1
For security reasons you will want to connect via VPN. This document has good information and helpful links: Server Admin 10.4 Help: VPN Service Overview
Luck-
-DaddyPaycheck

Conditional Alerting For Servers and Network Device

Similar Messages

Maybe you are looking for