Conditional Build Tab for image leaves extra white space

I've applied the "Print" Conditional Build Tag to an image in
my online help. When I generate the help and view it in the
browser, extra white space is inserted between the steps. For
example, instead of the steps being:
1.
2.
3. etc.
They now look like this:
1.
2.
3. etc.
Why is there extra white space where the image used to be?
Thanks in advance for your help. Using RoboHelp7 -- WebHelp.
Bill

Probably there is a paragraph break or a space that you can't
see but is not enclosed in the conditional tag.
Check the html code immediately before and after the tag.
Harvey

Similar Messages

Remove extra white space from an image

I want to remove the extra white space in my image while writing it into a jpeg file using JPEGImageEncoder.
Any help is welcome .

ok.. Am having a JPanel whose width is set to 77000. But almost 60% of right hand side of the Panel is empty. I will create a BufferedImage from this component and then write it into a file using JPEGImageEncoder.
The empty portion of the panel is coming as a white space in the image.
Now how to remove this ? Was that clear enough ?

Conditional build tags for TOC in Robohelp X5

HI, Can we apply conditional build tags for TOC in robohelp
X5. I know this feature exists in robohelp X6 and x7. But as i am
working on x5, i want to know whether we can apply conditional
build tags for TOC. if yes, whats the process?

Hello again Abraham
Okay, so you have a book named Privileges. It is linked to a
topic named the same, right? And inside this book is a book named
Billing. I'm guessing your TOC structure would look like this:
* Privileges
**** Billing
******** Topic one
******** Topic two
You seem confused that the Privileges book doesn't disappear
when you exclude the Privileges topic. If that were to happen,
would you also want the Billing book and all topics inside to
disappear? Because if the Privileges book were to be removed,
anything and everything inside the book would also be removed.
Indeed to remove a book you need to coax all topics linked
inside (or inside sub books) to disappear too.
Cheers... Rick

Placed Illustrator PDF has extra white space

Illustrator artwork saved as PDF, and placed on an InDesign page comes in with extra white space of around 1 1/3 mm on all
sides. I can't figure out what this unwanted white space is or how to avoid it. Can someone please tell me how to avoid the extra white space.

in which case - i can only apologise for the incorrect advice.
I've never had any problems with eps files - providing that the artwork is tidy.
And I've found loads of problems printing a placed pdf through a digital rip.
I'll leave it down to trial and error... and wish the best of luck.
cheers
re

How to extract ALL text on a line, including extra white space, from PDF?

I have written my first scripts to parse thru PDF files and successfully locate the beginning and ending of text portions that I wish to copy/extract. For example, one of the scripts reads thru PDF files and locates patterns that allow me to copy/extract a lengthy Title that spans several lines on the page. My remaining problem is that sometimes the text I wish to copy/extract has tabs or lots of white space between the words, and I need to retain ALL the "white space" between words. Basically, I am successful at using getPageNthWord(j, i, false) along with "Quad coordinate sets" to get a word-at-a-time for all the words on the multiple lines but it seems to be skipping over the tabs and extra white spacing beetween the words. Another way to say this is that I need to extract/copy a full line at a time, including all white space, instead of being limited to just a word at a time.
Can anyone help me with an algorithm to extract/copy text, not just the words but also including tabs and other extra white space characters? Is there some type of Regular Expression I should be using, or maybe some additional parameter used for getPageNthWord that would retain all the extra white space?
Thanks in advance,
Ted L

Did you try setting the bStrip parameter of getPageNthWord to false? It will
preserve some of the whitespace, but not all of it.
As far as I know, that's the only way to do it via a script.

Why is there extra white space on below the navigation bar?

I am running Nightly 6.0a1, and for the past few days, there has been extra white space under the Navigation Toolbar, as though there is an extra empty toolbar. The only toolbar I have is the Navigation Toolbar. BTW, this happens w/ tabs on top and bottom. Here's a screenshot: [http://i1004.photobucket.com/albums/af162/cg2916/extraspace.png http://i1004.photobucket.com/albums/af162/cg2916/extraspace.png]

Do you see any toolbars listed in "Nightly > Options" that are visible but do have a check mark?
See also:
* http://kb.mozillazine.org/Corrupt_localstore.rdf
Did you try a new profile?

Extra White Space Around Header Graphic & NavBar

I have a header graphic and Navigation Bar (rollover images)
positioned inside a table. Unfortunately, there is about 1-2 pixels
of white space on the left, right, and top of the header graphic.
Same with the NavBar--there's 1-2 pixels of white space on the
edges (left & right sides). By default, cell padding for the
table is set to zero. If cell padding is set to zero, why am I
seeing white space between the edge of the graphic and the edge of
the table?
You can see what I'm referring to here:
http://newstartinvestment.com
What is causing this extra white space, and how do I get rid
of it?

On 26 Mar 2007 in macromedia.dreamweaver, csbridges wrote:
> I have a header graphic and Navigation Bar (rollover
images)
> positioned inside a table. Unfortunately, there is about
1-2 pixels
> of white space on the left, right, and top of the header
graphic.
> Same with the NavBar--there's 1-2 pixels of white space
on the edges
> (left & right sides). By default, cell padding for
the table is
> set to zero. If cell padding is set to zero, why am I
seeing white
> space between the edge of the graphic and the edge of
the table?
>
> You can see what I'm referring to here:
>
http://newstartinvestment.com
(Btw, I
> don't like the yellow rollovers--they'll be removed
shortly.)
>
> What is causing this extra white space, and how do I get
rid of it?
Personally, I thought that the white border was a feature,
but... In
addition to the cellpadding, add cellspacing:
<table width="780" border="0" align="center"
cellpadding="0"
cellspacing="0" bordercolor="#000000" bgcolor="#FFFFFF">
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/contact.php

Extra White Space issue

Hi, I am currently building a website in Adobe Muse, and am really enjoying it. I have encountered a few differences between what I designed and what the site actually looks like and have been able to find solutions to all but one. The home page has just a header and footer and an Adobe Edge Animation. However, there is extra white space apearing underneath the animation (above the footer). Everything looks fine in the design mode, but even in preview there is extra space. I tried uploading it to our ftp, thinking that might be the issue (as the animation doesn't show in the preview mode), but the extra space is still there. I tried moving the Social media icons, thinking they might be causing it. I have looked to see if maybe there is a text box, or empty shape that is causing the discrepency, but I can't find anything. Any suggestions?
Here is the screen capture of the design mode:
Here is the screen capture of it in the browser:
Any help would be greatly appreciated.

Hi Razorcs,
I have checked your file and the white space is coming from the page that you are calling in the iframe. I have seen that most browsers do not respond well, when the widht and the height of the iframe is specified in percent.
As a fix you have to give manual width and height to the iframe and that should take care of it.
For example, try something like 412px, which is the height of the edge content,
Regards,
Abhishek Maurya

Extra white space in Firefox, not IE

Hello. I'm new to Dreamweaver and am having an issue I can't
figure out. I was hoping someone might have insight into where my
problem is.
In the following site,
http://www.firststepshr.biz,
it previews as designed in Internet Explorer. However, in Firefox,
extra white space (or blue background on the home page) is
appearing above and below the Flash header. I can't, for the life
of me, figure out why there's this difference.
Anyone have any ideas? Thanks, in advance, for the advice.
Jeremy

I don't see extra white space in FF2x.
If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines may not parse Flash links - your site will
not be
spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
You will have
to remake those buttons.
It's usually a very bad idea for these reasons - and for
these reasons,
Adobe has removed Flash buttons and Flash text from the next
version of
Dreamweaver.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dwellingproductions" <[email protected]>
wrote in message
news:gckfd0$odl$[email protected]..
> Hello. I'm new to Dreamweaver and am having an issue I
can't figure out.
> I
> was hoping someone might have insight into where my
problem is.
>
> In the following site,
http://www.firststepshr.biz,
it previews as
> designed in
> Internet Explorer. However, in Firefox, extra white
space is appearing
> above
> and below the Flash header. I can't, for the life of me,
figure out why
> there's this difference.
>
> Anyone have any ideas? Thanks, in advance, for the
advice.
>
> Jeremy
>

Issues in Application table - extra white space with and without scroll bar

1. There is an extra white space that comes after the last column in all the applications table, when there is no scroll lbar.
[http://files.oraclecorp.com/content/Private/Screenshots/Space_ApplicationTable.bmp]
2. If the scroll bar comes up then, there is an extra white space on top of the scroll bar.
[http://www-apps.us.oracle.com/~jkodiyan/fusion/screenshots/appstablespace1.jpg]

It would be best to follow this up in your internal ApplCore / ADF frontend forum..
screenshot for issue #1: http://www-apps.us.oracle.com/~jkodiyan/fusion/screenshots/appstablespace2.jpg
That's an internal Oracle URL - Probably not a good idea to share on the internet and it's not accessible outside anyway...

Why is there extra white space after exporting to JPEG?

After exporting an *.ai file to jpeg using 150 ppi and 5 for compression, I have extra white space below the artwork. This has happened in two files after exporting.

Urthie,
What about the Artboard, is that aligned to the Pixel Grid (it is if the size is a whole number of points/pixels and one corner is at X=Y=0 or another set of integer values, otherwise not)?
Edit: Cross posting.
Congratulations, some things are difficult to spot (and guess for others); your finding the solution is the best happy ending.

Why is there extra white space at the top of swf file?

I can't figure out how to get rid of extra white space in the browser at the top of a swf file. It looks fine when I preview the file, but when I do publish preview in flash/ try to incorporate in HTML, there's an extra 1/4" at top of window.

Do you have the html page (that you have the swf file embedded into) set so that there are no page margins? Your "body" tag should look like this…
<body leftmargin="0" marginheight="0" marginwidth="0" topmargin="0">

How do I remove extra white spaces in a string?

How do I remove extra white spaces in a string?
trim() removes before and after spaces.
If I have a string "This is Test"
I want to remove extra spaces between words and also I want to keep SINGLE space
between words. So output should be "This is Test". Thanks.

replaceAll dosen't support with my version. Actually this works..............!!!!!!!!! Thank you.
                    java.util.StringTokenizer st = new java.util.StringTokenizer(brn, " \t");
                    StringBuffer buf = new StringBuffer();
                    while (st.hasMoreTokens()) {
                         buf.append(" ").append(st.nextToken());
                    String brn1 = buf.toString().trim();

Conditional Build Tags for Text Blocks Applied to Entire File

RoboHelp 8.0.0.203. This post also deals with conditional build tags, but in this case the conditional build tags have been associated with sections of text and text blocks within a topic. The design was implemented originally in RH7 and the project has since been updated with RH8.
For example, you could have three blocks: Purpose, Procedure, Tips, and a Notes block. They are disabled by applying blocks Tag A, Tag B, Tag C, and Tag D respectively. If Tag A is applied to the Purpose, it is cross-hatched in the design window and does not appear upon generation.
The problem is that tags that are seemingly unrelated to blocks, such as Tag C and Tag D, are spontaneously applied to those blocks -- by the software. In fact, they would be spontaneously applied to all of the blocks and text in a some of the files (for no apparent reason), cross-hatching every element and every block of text in the file. When we unapply the tag and store the file, when we re-open the file, the tag is mysteriously re-applied to all the blocks -- again by the software.
Has anyone seen this type of problem in RH8?
Below is further detail about the problem
An example of how tags shold be applied involves a block involving three banners
<div class="banner">
     <?rh-udv_start name="Banner A" ?>BANNER A NAME<?rh-udv_end ?>
     <?rh-udv_start name="Banner B" ?>BANNER A NAME<?rh-udv_end ?>
     <?rh-udv_start name="Banner C" ?>BANNER A NAME<?rh-udv_end ?>
</div>
Under normal conditions, an associated tag would be applied to "unselect" two classifications, thus selecting the third by default. This is done by highlighting the associated banner, right-clicking and selected the "UnselectedBanner" tag, Below, banner C is selected by unselecting Banners A and B. T
<div class="banner">
     <?rh-cbt_start condition="UnselectedBanner"?>
     <?rh-udv_start name="Banner A" ?>BANNER A NAME<?rh-udv_end ?><?rh-cbt_end ?>
     <?rh-cbt_start condition="UnselectedBanner"?>
     <?rh-udv_start name="Banner B" ?>BANNER A NAME<?rh-cbt_end ?><?rh-udv_end ?>
     <?rh-udv_start name="Banner C" ?>BANNER A NAME<?rh-udv_end ?>
</div>
The <?rh-cbt_start condition="UnselectedBanner"?> indicates that the section is de-selected.
Note, that the "<?rh-cbt_end ?><?rh-udv_end ?>" are in opposite order in the example (but that's how it appears in the file).
In the cases where this problme occurs, we the html riddled with "Tag D" and "Tag C" condition tags for all the elements.
<?rh-cbt_start condition="Tag C, Tag D"?><div .......     </div><?rh-cbt_end ?>
I cannot attach any files because these files are on a classified system.
Thank you much.

Hi Tammy
It will also be helpful if everyone that encounters the issue reports as a bug. It's like a voting system. The more reports of bugs that are seen, the more weight is given to the priority. This directly translates to the fix being posted sooner rather than later.
So even though the bug has been "reported", you and others should take a moment and report as well!
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

"Open in New Tab" for Images in 10.1.0.273 Browser

Good Day Sirs.
I updated to OS 10.1.0.273 on my Z10 yesterday, and noticed that the "Open in New Tab" side-tab/option is gone when selecting images.
This is also inconvenient as I browse image-boards where I usually open multiple topics/pages from a list of images representing the respective topics/pages.
Anyone experiencing the same?
Or would anyone know if I just missed some browser settings? (tried checking these, didn't find a clue)
Thanks in advance.

Yes, I confirmed it with the same website I frequent. I was previously able to open in new tab any images, without switching from my current active tab.
Just like in this very Web page, I can open in new tabs the links above: "Forums" and "Knowledgebase"... while I don't have the option to open in new tab from the image "BlackBerry Support Community Forum" at the top-center of this page.
I only have the options:
Copy Image Link
Save Image
View Image
Share
Also, before 273 I was able to open images in place of pages on new and separate tabs. In that website, their index/catalog of topics are represented by image posts. The same page I mentioned above.

Conditional Build Tab for image leaves extra white space

Similar Messages

Maybe you are looking for