Conditional Formatting of a Direct Database Request Columns in OBIEE 11g

Hi All,
I need to do the conditional formatting like changing the
column color based of some condition, but i can do to the conditional
formatting in the normal answers in the column properties. But i want to do
it in the rows of Direct Database Request.
When i check the Column properties conditinal format is disabled.
Regards
Shanker

Hi Shanker,
It is a limitation, You cannot use conditional formatting in Direct Database Request
Regards,
Dpka

Similar Messages

Conditional formatting on a direct database request in 11g

Hello All,
I am working on a direct database request report, where I need to put a condition on a column . I know that conditional formatting is not supported in direct database request, is there any way we can do that?
Thanks
SR

SR,
Oracle SQL doesn't recognize HTML/CSS/Color codes so point to have conditional formatting in direct DB request
create an opaque view based on sql and model in rpd as below
OBIEE, Endeca and ODI: Fact and Dimension from single source Table
thanks,
Saichand

Direct Database Request - Incorrect Column Data type

Hello All -
hope you can help with this. I'm using the Direct Database Request in Oracle BI to send a complex query directly to our data warehouse. My problem is that the result columns containing my measures are converted to integer by Oracle BI when they should be double. The integer conversion causes decimal values to be rounded, reading to incorrect results in my reports. I've tried several tweeks to my query in an attempt to allow OBIEE to make the correct guess on the data type but nothing has worked.
Is there a way to force OBIEE to recognize the correct data type for a column in a Direct Database Request Query?
Thanks in advance for you help!
Mac

Thank you both.
David's response was helpful from a style/readability perspective (the columns in question were complex expressions) but I had already attempted the approach and it hadn't solved the formatting issue. Nico's response solved the problem.
Regards,
Mac

Date format in Direct database request

I have a report with direct database request.
I have a date prompt..I am storing the date in a Presentation Variable named pv_date.
In the direct database request, I have a where clause:
WHERE business_date IN ( @{pv_date}{'1/1/2013'} )
when I run open dashboard for the first time, its throwing me an error near TIMESTAMP.
WHERE business_date IN( TIMESTAMP ''2013-01-01 00:00:00'')
AND ALSO When I run this report from dashboard after choosing a date say 2/20/2013, I see the query as:
WHERE business_date IN (2013-02-20 00:00:00)
and hence throwing error.
Its throwing error in both the cases. How do I change the format in WHERE clause..
Ideally, I want the query to be WHERE business_date IN ('2/20/2013') or Business_date IN ('2013-02-20')

Thank you both.
I am using Sybase and hence used convert function.
But still I see the word TIMESTAMP in the query which is causing issue.
business_date IN(CONVERT(char(10), TIMESTAMP ''2013-03-27 00:00:00'',101))
and when I run the report by choosing any date, I see this: business_date IN(CONVERT(char(10),2013-03-27 00:00:00,101)) ; throwing error because No single quoted for the date.
How do I remove the word TIMESTAMP?? and how do I impose single quotes..

Cannot sort on a column in direct database request analysis

We are having an issue on sorting on a field. The analysis was created using a direct database request. Once the results are displayed in Table/Pivot table, users would like to sort on a particular column, but this is not working currently. Any idea as to how to fix this?
Thanks,
Ravi

There is definitely an easier way in later JDeveloper releases, but using the <jbo:* > tag library the way involves either using the orderbyclause property of the <jbo:DataSource> tag, or programmatically invoking a method in your ViewObject or ApplicationModule's public service interface that internally accomplishing the same thing which is to invoke the setOrderByClause() API on the view object in question.

Direct Database Request - Add Drop Down List

Hi,
I have created a direct database request and would like to represent the output in table format. How can I add a page drop down filter, I would like to move two columns as page drop down lists and also be able to view the columns in the table.
I know how to acheive this with a pivot table, but can this also be done with a table layout?
Thanks

Here is the answer to your specific question: No, you can't do "page drop downs" in Table View. You will have to use Pivot Table as described in previous posts.
You will have to use dashboard prompts to get your choices. You are probably saying, "but dashboard prompts must be built on a Subject Area column and I can't select it because I am using a direct database as my source. So how do I create the prompt?"
Good question. My question is, on the columns that you need as the "drop down filters," are those columns in any existing Subject Area? I know that your request is built by direct database, but if the specific column you need for your dashboard prompt can be found in a Subject Area, then you can use that Subject Area on which to build your dashboard prompts.
You can add a WHERE condition in your direct database to receive the presentation variables. Read below to learn how:
http://108obiee.blogspot.com/2009/11/variables-in-direct-database-requests.html

Applying Prompt on Direct Database Request in OBIEE 11g

Hi
I am creating Analysis by using 'Direct Database Request' and i am executing SQL Query to direct Database i am NOT creating Business and Presentation Model in RPD. Now i have to apply Filters on Report. any idea how i can do that?
Example:
Prompt (filter) : Year                 Employee Department
                          2011                    HR
                          2012                    IT
                          2013                    Finanical
Employee Name |    Employee Age   | Gender | Leave Status     |    Leave Type
abc                            31                      male       on leave              Sick leave
xyz                             39                    Female    on leave               Annual leave
i want to filter by YEAR and Employee Department.
Regards
Baig

NO!!!!!!!!!!
You Direst SQL query should contain the url
ex:
SELECT COL1,COL2,
'<a href=http://obiapps:9704/analytics/saw.dll?Go&Path=/Answers&path=%2Fshared%2FAppslink%20Dashboards%2F_portal%2FAppslink%20Dashboards%2FEmployee%20Department=Navigate&P0='+BUSINESS_GROUP_NAME+' target=_new>'+BUSINESS_GROUP_NAME+'</a>
FROM TABLE
then go for the column format
Note: in MS SQL + is for concat, you might have to change based on your db.

Use of Filter in Direct Database Request for Custom Navigation

Because of union and other complex sql code I am using Direct Database Request. (DDR) In 1st request based on DDR containing column Region, I need to do Region column value navigation to the Target report. The Target report is also based on DDR and has column Region.
For 1st Report Region Column Value Navigation to work
1. I did activate value interaction in 1st Report for Region column and set Target to Report 2.
2. In 2nd Report, I have to use Filter and make region column "Is Prompted". But in DDR the filter is not available. How do I solve this problem?

by using Direct database request your bypassing all the wanderful metadata you built in the BMM layer, as such much functionality is not available.
If you really need to use such complex SQL, I would suggest creating an inline view in the phyiscal layer and at least model this through your BMM either as a flat data source (ie include the dimension columns and model the same inline view into your BMM star)
If you do that, the BI Server will know what other logical columns this data source can relate you and you should find the navigation works as expected.
If you dont fancy that good practice, have a look at creating GOURL formulas as the column fx's, format as HTML to present the data as a hyperlink and manually pass all the parameters to the 2nd report.
I'd do the first option, its more inline with intended use.
What cant you do using the 'normal modelling / answers techniqes with union (see combined request in answers) and complex sql (evaluate function in RPD)??

Direct Database Request

Hi All,
I am trying to set up a Dashboard Prompt using the SQL results of a Direct Database Request. I am using Oracle 11g.
So far I have created the connection and created the analysis using the Direct Database Request. I am using Presentation Variable to pass into the Where Statement to filter however, I need a Dashboard prompt that will display the results of a particular column (country) in the Choice list options for filtering. I have tried to go into Dashboard Prompts and create a presentation variable and then use a SQL statement to render results for the prompt choices but that does not seem to work. Does anyone have an suggetions on how to Populate a Dashboard Prompt using Direct Database Request?
SQL CODE FOR DASHBOARD PROMPT
SELECT COUNTRY_CODE FROM POA_ADDRESS_DIM

Thats Srini,
I already have that presentation variable in my analysis in the where clause to limit the data request. The issue I am trying to resolve is similar to creating a filter based on another analysis.
I created an analysis using DDR the DDR results is what I want to incorporate into a dashboard prompt. So the best logical way to put it is Take the results from a DDR and place it into a Dashboard Prompt as user choices. An added bonus if I could make the presentation variable pick up multiple selections from the Dashboard prompt. I know we could change the operator to IN however the formating of the choices would have to be something like this ('@{PV_COUNTRY}') <--- minus the paranthesis.

Direct Database Request with Dashboard Prompt LOV Source

I have complex Direct Database Request query having Dashboard Prompt. In Dashboard prompt I want to have LOV. But to create the DPrompt having LOV, I must have the table/column in Subject Area. How I can have table in RPD not connected or joined with any table in RPD?
The idea is to do the reporting based on direct query with Prompt/LOV but do not want to include the prompt source table with other my main logical model which is used for other purpose.

Hi Kishore
Thanks for the reply but it is little less clear because I already have working Dashboard level prompt where
1. Instead of LOV I type the value, use the Presentation Variable as Set Variable on Dashboard Prompt, say pDepartment
2. Created direct database rqeuest query having where condition .. WHERE Department= '@{pDepartment}'
And the above Dashboard works great. Only problem is that I want to have LOV for Department for which I need to have the respective table/column in RPD
I liked your idea about BI publisher but how do you really deploy the BI Publisher?
Thanks
OBIEEFAN

Using Filters in Direct Database Request

Hi,
I am creating my report table using direct database request option. Now i want to filter the column values. But in Direct Database Request report OBIEE is not giving option for filtering i.e. filter Add Filter button is not visible. How can i do it?
Thanks
Aasim Khan

Actually i can not hard code these values in my SQL. I am using variables in my SQL to give where clause condition. But how can i set these variables? The actual scenario is that i have a report table. When i clicked some column of this report i have to navigate to another report and pass some value of clicked row to the next report. On the next report SQL i have defied a variable in my where clause. But i am unable to set this variable when i clicked on some row link. So how can i achieve it in direct database request report?
In normal answer report all values of the clicked report are passed to the next report, and in the next report we mention filters with "is prompted" option to apply the selected values. But in Direct Database Request report we do not have this filter option. So can anybody explain how can i update variable values in the above mentioned scenario.
Thanks,
Aasim Khan.

OBIEE Answers Direct Database Request

The issue is that I want to link two reports created using Direct Database Request. i.e. when I click on a column of Report A I should be directed to Report B with the filter passed from Report A. The issue that we are facing is that we can access the presentation variables in Report A, but are unable to pass them to Report B.
Any Idea ?
Regards,

we can access the presentation variables in Report A, but are unable to pass them to Report B.
If you are not using the prompts, How can you refer a Presentation Variable?
GOURL can be implemented to Direct Database Requests...
Go to Column Properties ==> Data Format ==>Check Override Default Data Format and Choose Custom .. Format
Here specify the Go URL..
For GO URL concepts, go through the link given by Christian..

Drill down on direct database request

Hi all,
I would like to know if its possible to drill down in a table created with a direct database request. I've created the direct request and run it perfectly, but drilling down is not enabled and I, even thought I've looked for it, I couldnt find any option to enable it. I've also checked privileges just in case it had something to do with this, but didnt see anything neither.
To sum up, could anyone tell me if drilling down is possible in direct database request and, if so, how can I achieve it?
Thank you very much in advanced for any kind of help.

NO!!!!!!!!!!
You Direst SQL query should contain the url
ex:
SELECT COL1,COL2,
'<a href=http://obiapps:9704/analytics/saw.dll?Go&Path=/Answers&path=%2Fshared%2FAppslink%20Dashboards%2F_portal%2FAppslink%20Dashboards%2FEmployee%20Department=Navigate&P0='+BUSINESS_GROUP_NAME+' target=_new>'+BUSINESS_GROUP_NAME+'</a>
FROM TABLE
then go for the column format
Note: in MS SQL + is for concat, you might have to change based on your db.

Table Functions, Direct Database Requests, and NUMBER data types

Hello. I call a number of table functions from our BI Enterprise server, and I've elected to do so using Direct Database Requests (I believe you can also call table functions in the physical layer of the repository, but that's not what I'm doing). The problem is that whenever I return any number from the table function that is not a whole number (1.23, for example), BI assigns the INTEGER datatype to the field instead of the DOUBLE datatype, thereby rounding my number to the nearest integer. Here's a concise example:
Create these 3 database objects:
CREATE OR REPLACE TYPE my_row AS OBJECT (my_num NUMBER);
CREATE OR REPLACE TYPE my_tab AS TABLE OF my_row;
CREATE OR REPLACE FUNCTION my_table_function RETURN my_tab
PIPELINED IS
BEGIN
PIPE ROW(my_row(1.23));
END;
Then make this your query in your Direct Database Request:
SELECT my_num FROM table(my_table_function);
That query correctly returns "1.23" when it's called from the database. In BI, on the other hand, it returns "1" (and labels the field an INTEGER instead of DOUBLE data type). If in the Direct Database Request you change the Column Properties ->Data Format -> Decimal Places from 0 to 2, it then not surprisingly displays "1.00". I then tried changing MY_ROW.MY_NUM's datatype by explicitly specifying precision, and no luck. BI still labels this field as an INTEGER. Then I started trying to trick BI by massaging the SQL statement itself. None of the following worked:
SELECT to_number(my_num) as my_num2 FROM table(my_table_function);
SELECT my_num2 + 0.01 as my_num3 FROM (SELECT my_num - 0.01 AS my_num2 FROM table(my_table_function));
SELECT to_number(to_char(my_num)) as my_num2 FROM table(my_table_function);
SELECT to_number(substr(to_char('x'||my_num),2)) as my_num2 FROM table(my_table_function);
Now I did find a solution, but I'm surprised that I have to resort to this:
SELECT * FROM (SELECT /*+ NO_MERGE */ my_num FROM table(my_table_function));
Does anyone out there know of a better way to do this? The above is a hack in my opinion. :)
Thanks in advance for any input.
-Jim

Yes, it's really amazing.
But I got it.
CREATE OR REPLACE TYPE my_row AS OBJECT (my_num NUMBER(10,2));and in your SQL :
SELECT cast(my_num as double precision) as my_num2 FROM table(my_table_function);I have the good result and I see the numbers after the comma.
Very tricky !
Edited by: gerardnico on Jul 7, 2009 2:55 PM change number(10,2) by double precision ......... pfffff

Direct database request and session variable value

Hi,
I have a problem by doing the following : idea is to have report with a list of all tables in user schema (which are not all in repository physical layer).
By clicking on the name of any, should bring answer report which is done as direct database request doing basically select * from table_clicked (this will be basically the same table with sufix _err holding error rows).
What I'm trying to do is having some kind report for error rows which can be in different tables in my database. So i had in mind to construct name of table i need , and pass it to database request through session variable. Am i doing right by doing direct database request like this :
select * from 'VALUEOF(NQ_SESSION.TestVar2)'
Is there another easyer way of doing this? I know this can be done by gourl by passing parameters but not sure how when i can't filter columns in direct database request (this can be different tables with different names of columns). I hope i didn't complicated this too much.
Thnx in adwance

Hi,
I know this is a hack, and would be much more easy to create one table with dimension and measures, but this is intended to be used with code generator, which can produce different error tables with different column names in different time: It is not conviniet for somebody to add them to repository every 5 minutes. For example : i run my workflow and for first run I have errors in table1(let us say customer table with 30 columns) and if click on the table name in some answer report, i want to see all the bad records in the table. Tomorrow after the run, there are bad records in table1 and in table2 (lets say products) so I would have choice to pick table 1 or table2 and see al the bad records in any of these tables. This means that I can not now which tables will I have tomorrow, and as it is generic, I can manually add some tables in my model, and would have to add err table also as a possibility to have error rows?
I saw post saying that you can pass parameter value by using go url functionality, by modifying configinstance file, but didn't suceed - http://gerardnico.com/wiki/dat/obiee/logical_sql/obiee_session_variable_go_url . Maybe some mistake or any better solution? I created session variable TestVar2, also modified instanceconfig.xml by adding this before </ServerInstance>
<ParamList>
<Param name="NQ_SESSION.TestVar2" source="url" nameInSource="SETVAR"/>
</ParamList>
and used go url in column formula : ''||"Physical Targets"."Physical Table"||''
Can I use @1 for using first column value?
Thnx

Conditional Formatting of a Direct Database Request Columns in OBIEE 11g

Similar Messages

Maybe you are looking for