Conditional routing - 1 sender to 1 receiver but with multiple locations

Hello Experts,
I have a scenario where i am trying to post ALEAUD Idocs (acknowledgement Idocs) from ECC - PI - MDM.
I need these acknowledgement statuses to get updated in MDM (receiver system) for MATMAS, CREMAS and DEBMAS.
I am through till receiving the acknowledgemnts in PI. I am stuck at a point wherein I need to route MATMAS related messages to a different folder in the receiver system (MDM) wheraes messages realted to CREMAS should be routed to another folder in the same receiver system (MDM) and similar is the case with DEBMAS.
ALEAUD Idoc has an element <MESTYP> which identifies whether the acknowledment belongs to MATMAS, CREMAS or DEBMAS, but i cannot use Reciever determination for conditional routing in this case.
Will BPM help in this case? If not, kindly advice the appropriate solution.
Thanks in advance,
Elizabeth.

Have you tried using Enhanced Receiver Determination? You need to define a mapping first
ALEAUD -> ReceiverDetermiation and use this mapping in your receiver determination step
in the Integration Directory. Its fairly flexible.
SAP ABA software component version, http://sap.com/xi/XI/System, ReceiverDetermination
Edited by: Sven Buttler on Sep 14, 2010 2:38 PM

Similar Messages

I would like to use one library but with multiple ipods, but because they are my kids Ipods, and they each have their own gift cards, I'd like to be able to add money to their "profiles" without them having their own account - what is the best way

So here is my delima - I want one Ipod account - because I only want one library - since we all like the same music - but my kids, who have their own IPODS, have gift cards, who want to be able to keep track of their balance without the other child affecting the balance - meaning - each gift card should be seperate and not totalled to the single account - Beacuse the library is fairly large, having three libraries of large amounts would be a waste. I would also like to restrict their purchased to the gift cards only and not my credit card on file. Does this make sense? Once this is resolved, I'm assuming they would use their own playlists to copy their favorites to each Ipod. Or would I set up an account for each child - which I dont want to do, because I dont want them having access to my Credit Card, and only gift card balances. With multiple accounts, I'm assuming that would also build seperate libraries? We also have multiple computers, but I share the library to those computers -
What is the best way? I'd like to be able to add credit to a specific child (birthdays, etc) without the other child being able to access that credit. For simplicity sake.
We are new to IPODS and lack any MAC skills.
Thoughts?

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

Mutiple sender files and receiver files with different file names

Hi All,
Following is my scenario: File (FTP) --> XI --> File (NFS actually SAP system)
I have 5 source files like ABC<b>1</b>_DateTimeStamp, ABC<b>2</b>_DateTimeStamp, ABC<b>3</b>_DateTimeStamp, ABC<b>3</b>_DateTimeStamp and ABC<b>3</b>_DateTimeStamp.
I can use single sender file FTP adapter with file name ABC* which picks up all 5 files, but can I use single receiver adapter to create 5 different files with the following file names: ABC1, ABC2, ABC3, ABC3 and ABC3 ?? And last 2 files (ABC3 and ABC3....same name) should be created after 30min and 60min of first ABC3 file. We have to do this because we have jobs scedule on SAP side with variants having file names.
Is it possible to achieve using single sender/receiver file adapter??
If not any suggestions how to do this scenario??
Thx
Navin

Navin,
I doesn't know whether its feasible for you or not. Please see the below option
Create 3 Sender comm.channels and 1 Receiver comm.channel. In Sender /Receiver file adapter check the Adapter Specific Message attributes.
I'm suggesting the soln using BPM.
In IR, Create 3 Outbound Interface (Abstract) and create 1 Inbound Interface(Abstract).
First 2 comm.channel and 2 Oubtound interface refers to file 1 & file2 respectively.
The 3rd comm.channel and 3 Outbound interfaces refers to file3 & file4& file 5 .
Please see the BPM design.
http://www.flickr.com/photo_zoom.gne?id=698877499&size=o
Note : Navin the above suggestion is my thought, I think it will work. U can juz give a try.
Best regards,
raj.

Solved. Travel router WTR54GS sharing one wireless hotspot connection with multiple devices

Hi, Passing on info I've learned.
The manual for the WTR54GS mentions being able to "...use multiple devices on a single hotspot account in a coffee shop or airport lounge...". See my original posting, "How to set up a wireless private bubble at paid hotspot? WTR54GS?", which ended in a dead end. I subsequently had a Linksys live chat session and the representative provided the solution. Perhaps worthy to be included in the Wireless FAQ?
Situation: you have access to a paid hotspot (hotel room, meeting room, etc.) and you want to share the connection with several devices, also wirelessly.
Solution: the WTR54GS can accept an incoming Internet connection wirelessely and re-broadcast that connection to form your own private bubble or network. (Note the WTR54GS can also accept an incoming Internet connection via Ethernet cable).
Linksys Live Chat pointed me to these web pages.
Go to the Linksys Easy Answers page: For a schematic of the concept of "associating the travel router to a hotspot (wirelessly)" search for Easy Answer ID# 4831
URL for above is http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4831&p_created=1167963305&p_sid=GmLnq3Zi&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NjImcF9wcm9kcz0wJnBfY2F0cz0xNzIxLDE3MjMmcF9wdj0mcF9jdj0yLjE3MjMmcF9zY2ZfbGFuZz0xJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9V1RSNTRHUw**&p_li=&p_topview=1
There is a "configuration simulator" that shows the options for selecting a wired or wireless incoming Internet Type.
http://linksys.com/ui/files/WTR54GS/1.0_15/Setup-Wireless.htm
The hotspot has to be "open", that is transmitting an SSID and with no WEP or WPA key. It may have a log-in page accessible via a web browser, this is okay as this will be passed onto the connected device.
My personal application is to be able to connect a PDA that has a 801.2b wifi to a 801.2g wireless network. I haven't tried it but if this works, it will extend the useful life of my PDA in a "g" environment. Will report back once I find a "g" only environment. Comments?
-Tony
Dang, the long URL is making for a really wide message. Is there a fix?
Message Edited by tony_vancouver on 02-28-2008 02:08 PM
Message Edited by tony_vancouver on 02-28-2008 02:12 PM

There are two conditions which must be met in order to use your WTR54GS to "extend" an incoming, wireless internet connection:
The incoming connection must be unsecured. You have already covered this point;
The security settings on your WTR54GS can only be set to "WEP," or to "Disabled." If you choose "WEP," then you can use either a 40/64-bit, or a 128-bit key.
If those two conditions have been met, then it works fine -- says the guy who is sharing one paid internet conneciton in his hotel amongst three devices, and with co-workers in nearby rooms.

Configuring receiver determination with multiple messages in BPM

I am configuring a BPM scenario which uses 3 abstract interfaces, one for receiving, 2 for sending. I need 2 abstract interfaces while sending because they use different message types. I have created a Receiver Determination for the 1st interface, but the problem is that when I try to create the second Receiver Determination the 2nd abstract interface is not listed after I select the Integration Process. Just the 1st interface is listed under the Integration Process. What might be the problem?

Did you try to delete and reimport the BPM with the same name ?
SKM

How does receive() work with multiple receivers/subscribers?

Hi,
actually I'm using the JMS API to create a lightweight MQ service for Java ME tailored for my purposes. I'm generally familiar with JMS but I have some question to which I couldn't find the answer neither in the API spec nor on google. I think that many of you can answer it.
At first, is it possible to create multiple receivers on the same queue (same or different sessions)? Generally, I though a queue can only have one consumer since the call of receive() will delete the message from the queue so that a theoretical second consumer couldn't get the message anymore. But int the APi docs, it doesn't explain what happens if you call createReceiver() multiple times. Will it throw an exceptions?
A similar question goes for topics. A topic is supposed to support multiple subscribers. When subscribers register listeners, I understand it. But what if they don't and instead call receive() which is available because TopicSubcriber extends MessageConsumer. Is the message also deleted from the queue or is receive not supported for topics and will throw an exception? Will it remain until all subscribers have either called receive on that message or have been notified by onMessage? If yes, what happens if a subscriber doesn't call receive. Does the message stays there forever? What if new messages coming in, will the queue wait until the previous message is completely consumed?
From my point of view, I tend to only allow one receiver for a queue. If the receiver calls receive, the message will be deleted. For topics, I would only allow listeners, not receive() calls. Once the message has been delivered to all subscribers it will be deleted. If I'm misunderstanding the concepts, please correct me!
Thanks a lot!

At first, is it possible to create multiple receivers on the same queue (same or different sessions)? Generally, I though a queue can only have one consumer since the call of receive() >will delete the message from the queue so that a theoretical second consumer couldn't get the message anymore. But int the APi docs, it doesn't explain what happens if you call >createReceiver() multiple times. Will it throw an exceptions?If you have multiple receivers on the same queue then the JMS provider will distribute messages between the two receivers on the basis that each message goes to only one receiver. The exact distribution of messages depends on the JMS provider, and is not mandated by the JMS specification.
A similar question goes for topics. A topic is supposed to support multiple subscribers. When subscribers register listeners, I understand it. But what if they don't and instead call >receive() which is available because TopicSubcriber extends MessageConsumer. Is the message also deleted from the queue or is receive not supported for topics and will throw an >exception? You can consume messages from a topic using either a MessageListener or by calling receive(). They both work in the same way.
Will it remain until all subscribers have either called receive on that message or have been notified by onMessage? If yes, what happens if a subscriber doesn't call receive. Does the message stays there forever? What if new messages coming in, will the queue wait until the previous message is completely consumed?Essentially, if you send a message to a topic then it will be delivered to every subscriber, irrespective of whether that subscriber is synchronous (calling receive() or asynchronous (supplying a MessageListener).
In both cases, the consumer might not actually be ready to accept that message just yet (the applicaiton might not have called receive() yet, or onMessage() is still processing a previous message). In this case the message will be held within the JMS provider in an internal queue of messages designated for that specific consumer. Logically speaking, there's an internal queue for each consumer, rather than an internal queue for the whole topic, though how the provider actually implements this will vary. Note that the concept of each subscriber on a topic having its own internal queue is not one described in the documentation, it's just a way for me to explain it.
If the consumer closes before it actually receives the messages waiting in its queue, and the subscriber is non-durable, then the internal queue will be thrown away. If the subscriber is durable then the internal queue continues to exist and continues to accumulate messages even after the subscriber has closed.
From my point of view, I tend to only allow one receiver for a queue.
If the receiver calls receive, the message will be deleted. For topics, I would only allow listeners, not receive() calls.
Once the message has been delivered to all subscribers it will be deleted. If I'm misunderstanding the concepts, please correct me!Yes, you have slightly misunderstood this :-) I hope my explanation above helps clarify this.
Nigel

Sending emails to one Contact with multiple Addresses

Hi,
I am a volunteer with youth sports, and frequently need to send emails to entire teams of kids. I have the players all listed as one contact, but have the email addresses both parents and themselves listed under their contact. When I send an email, I need it to go to all listed, Parents and Players.
Separating the contacts would be a disaster, as when I need to contact a player I always need to contact, Mom, Dad, and Player...
I did create a group for my team, thinking this was the solution to my issue. Unfortunately, when I went to send an email, it only went to one email for each player. That lead to many complaints "Why did I not get the message"...
Love everything Mac so far, but this is killing me... and may keep me away. Outllook lets me do it so easily, why not mac.
I would appreciate any help.

Thanks - starting a brand new SMS rather than continuing an existing thread gave me the option of which number to choose, and the thread then switched to show all the messages related to that number.

Best wireless router (apple or non-apple) for use with multiple Macs

What is the best wireless router, from any manufacturer, for use with 3-5 Macs? (in a reasonable price range... sub $150)
least problems
most reliable
strongest signal/best range
fewest drops
fewest reboots

The Apple Routers "just work".
I also have a linksys. It takes a good bit of knowledge and aggravation getting it set up, but once working it does fine.
If you plan to use your router to share a printer, hook to your stereo, etc. definitely stick with Apple. It will save you much grief.

JDBC receiver adapter with multiple stored procs error

Hi all,
I am doing a scenario IDOC-XI-JDBC. The destination system in MS SQL server 2000. I am passing variant config information to update the destination tables by triggering the same stored procedure multiple times with different parameters.
Everything is correct, but JDBC adapter is giving me the following error
Unable to execute statement for table or stored procedure. 'mk_EditAllowedLowerSpineImprintingOptions_proc' (Structure 'CallProc') due to java.lang.IllegalArgumentException
My payload looks like this. This is just a partial payload, the blocks of CallProc continue till the CallsRemaining number reaches zero(0).
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_UPDATEPERSONAVARIANTS xmlns:ns0="urn:sd:sales:sapvarianttablestopersona">
- <CallProc>
- <Update_Persona_Variants action="EXECUTE">
<table>mk_EditAllowedLowerSpineImprintingOptions_proc</table>
<AlbumType type="CHAR">7SPEC</AlbumType>
<UpperSpineImprintingOption type="CHAR">UST</UpperSpineImprintingOption>
<LowerSpineImprintingOption type="CHAR">NOL</LowerSpineImprintingOption>
<EffectiveDate type="DATE">20040503</EffectiveDate>
<CallsRemaining type="INTEGER">27</CallsRemaining>
</Update_Persona_Variants>
</CallProc>
- <CallProc>
- <Update_Persona_Variants action="EXECUTE">
<table>mk_EditAllowedLowerSpineImprintingOptions_proc</table>
<AlbumType type="CHAR">7SENT</AlbumType>
<UpperSpineImprintingOption type="CHAR">UST</UpperSpineImprintingOption>
<LowerSpineImprintingOption type="CHAR">LSP</LowerSpineImprintingOption>
<EffectiveDate type="DATE">20040503</EffectiveDate>
<CallsRemaining type="INTEGER">26</CallsRemaining>
</Update_Persona_Variants>
</CallProc>
- <CallProc>
- <Update_Persona_Variants action="EXECUTE">
<table>mk_EditAllowedLowerSpineImprintingOptions_proc</table>
<AlbumType type="CHAR">7SPEC</AlbumType>
<UpperSpineImprintingOption type="CHAR">UST</UpperSpineImprintingOption>
<LowerSpineImprintingOption type="CHAR">LSP</LowerSpineImprintingOption>
<EffectiveDate type="DATE">20040503</EffectiveDate>
<CallsRemaining type="INTEGER">25</CallsRemaining>
</Update_Persona_Variants>
</CallProc>
......CallProc blocks continue till CallRemaining reaches zero.
I also tried making CallProc element appear just once in XML and repeating <Update_Persona_Variants> blocks like below
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_UPDATEPERSONAVARIANTS xmlns:ns0="urn:sd:sales:sapvarianttablestopersona">
- <CallProc>
- <Update_Persona_Variants action="EXECUTE">
</Update_Persona_Variants>
<Update_Persona_Variants action="EXECUTE">
</Update_Persona_Variants>
</CallProc>
</ns0:MT_UPDATEPERSONAVARIANTS >
but still i get the same error.
Can anyone guide me what is wrong.

Well,
The problem was with the way date was passed to the stored procedure, i just needed to format the date to yyyy-mm-dd and the error was solved. The error given by the JDBC adapter was not correct. I tried using logSQLStatement additional parameter, but for stored procedures it does not give out the actual SQL statement being fired. I was able to find the error in log files found on WAS server in transaction AL11.
So i suggest to everyone having issues with JDBC adapter, please do not trust the error given in runtime workbench, always crosscheck in the logs in AL11 at the following location in your XI box
DIR_INSTANCE\J2EE\CLUSTER\SERVER0\log. Here find date and time when you triggered your scenario and search for your table name or stored proc name, the java dump will give you a good information.
I am giving points to everyone anyways.
Thanks
Pulin

Drop insert in receiver system with multiple clients

Hello,
does TDMS handle drop-insert technology in a multiple client receiver system automatically?
What can be the impact for the other clients when they are working while data deletion in the
receiver client?
Regards Karlheinz

Hello Karlheinz,
Good, question is straight and clear now.
please refer to steps mentioned in oss note 1433553 to make sure that TDMS should not consider drop_insert in TDMS migration.
Regards,
Amit Sharma
Solution
You have the possibility to set a Global Parameter for setting the deletion
scenario to overall array delete. In the following a description of the
proceeding.
Check if the global parameter GLOBAL_NO_DROP_INSERT exists
and that it is set to 'X' in the receiver system.
Call the Migration Server Overview(tcode cnv_mbt_tdms).
Expand the tree until you get your package.
Mark the package number so that it is highlighted.
In the menu click on Goto->Global Parameter.
When you have correctly positioned your cursor on a package number you
will see in the application toolbar buttons named with the exection targets,
system name and client number. You can also see if a connection to the listed
system is working (checkmark) or not (lightning).
Click on the button
'RECEIVER' to get the global parameters from the receiver system. This is where
the Global Parameter has to be set.
The global parameter entries will be
delivered empty and for the parameter you want to use you have to set the value.
An initial global parameter has no value in the column 'Client'.
Mark the row with the global parameter
'GLOBAL_NO_DROP_INSERT'.
Press button copy text (third button).
In the menu bar click on the drop-down box of the insert button and choose
the item 'Insert in new row' in the selection list (forth button from
left).
In column 'Client' enter the client where you want to use the overall
scenario array-delete. If you enter the value 'ALL' then the setting is valid
for all clients in the system.
In the column 'Parameter Value (from)' enter the value 'X'.
Save your settings.
If the parameter already exist you have to check whether the correct
client is set. If the column 'Client' includes the deletion client or the value
'ALL' then no further settings are required. Otherwise you have to copy the
Global Parameter as previously described and change the value in the column
'Client' with your deletion client. Take care that the value in column
'Parameter Value (from)' is 'X'.
From now on the generation of deletion
programs will use this information to create the deletion programs with deletion
scenario ARRAY-DELETE.

A script appears but with multiple continues and stop does neither : ///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:2309

///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:2309 clicking the continue and stop options results in the warning continuing. I am unable to close Firefox and cannot delete the program and reinstall. I am using IE to reach this site. Is there another way to uninstall Firefox and reinstall or to get the script to function. Thank you for your help. TG

This is typically caused by a problem with the Personas Plus 1.6 add-on and it conflicting with the Google toolbar.
Try disabling the Personas Plus add-on. To do this open the add-ons manager by selecting the Tools menu, then Add-ons. In the list of installed extensions click on Personas Plus, then click on either disable or uninstall.
If you can not access the add-ons manager, follow the instructions in the [[safe mode]] article to start Firefox in safe mode. You should then be able to disable or uninstall Personas Plus. You can find more information on this procedure in the [[Troubleshooting extensions and themes]] article.

MDX Calculated Member With Multiple Conditions

I need to create a calculated member in my cube that spans multiple dimensions. A current calculated member looks like this:
[Employee Hours Category].[Utilization Category].[NON-PTO], [Measures].[Employee Hours]
This calculated member returns all the hours an employee worked that are not PTO.
I need to select employee hours but with multiple conditions:
- [DIM BILL STATUS][Bill Status] equals 0
- [Employee Hours Time Category].[Time Category] equals "Client Facing"
- [DIM PROJECT].[Client] isn't like "Olson"
I know this is probably pretty easy, but I'm horrible with MDX!
Thank you!!
A. M. Robinson

Thank you...
Your answer looks good but I was actually able to figure out most of it, but still looking how to incorporate a FILTER into the MDX. I would like to FILTER like this:
FILTER ([DIM Project].[Client].[Client].Members ,
NOT InStr([DIM Project].[Client].CurrentMember.MEMBER_NAME, "Olson")
Heres the MDX I have so far that is working fine:
([Employee Hours Time Category].[Time Category].&[Client Facing],
[DIM BILL STATUS].[Bill Status ID].&[1], [Measures].[Employee Hours])
Do you just wrap the whole MDX in the filter, and if so, how would that be formatted?
A. M. Robinson

Windows Mail can receive but not send until exiting application

Hi, and thanks for taking time to read this as I’m in need of your help.
I have a Toshiba P200, Vista Home Premium, Tiscali as my ISP, Norton Internet Security for AV and firewall, and am accessing my broadband via Ethernet to a Belkin ADSL router (and occasionally a Siemens router) and I’m experiencing some strange happenings with Windows Mail.
In short I can receive mail with no problems, but when I send the mail it stays in the outbox despite the Send Immediate option being checked or pressing the Send/Receive button. When I exit Windows Mail the mail is sent straight away, and is in the Sent Mail folder when I restart Windows Mail.
So why do I think there’s a problem with the laptop. Well, I’m fortunate enough to have a friend who has an non-Toshiba laptop, where all of the above can be replicated. Guess what, Windows Mail sends the mail exactly as it should (on my Tiscali account and on my network, through my router and ISP etc.), so I conclude that the only difference is that my laptop is a P200.
I have called Tiscali who confirmed that all my Mail settings were OK, POP, SMTP etc, which I’d expect (as they work on my friend’s laptop), and they advised I contact Microsoft, which I did, and since the P200 has Vista pre-installed they say I have to contact Toshiba, and here I am.
My P200 has been restored to factory settings, and I have tried to get this working without Norton IS, and no firewalls (Vista and router), but no luck.
Any ideas would be much appreciated and if I find out by other means, I’ll post back with outcome. If the answer is already out there, I apologise for being too dumb to locate it and beg your patience.
Many thanks.

Hi
It is typical for support people. Every of them try to send the customers away and the reason should be by them. In my opinion Microsofts reaction is strange for me. They have designed operating system and they should be responsible for the functionality.
I have Satellite A200 and Satellite P200D and I use Windows Mail on both of them successfully. My notebook is connected to WLAN router and router directly to the phone line. To be honest I have configured Windows Mail like you and all job were done in few minutes.
It is not easy to say where the problem can be but I believe there is some problem with some settings on your notebook. Some of them block it somehow. To compare your, with friends notebook is also not the best because he can have completely different OS settings (antivir application, firewall settings).
Try to disable all features who can block Windows hotmail to see if there is some difference.

Receive, But Not Send Mail

I recently purchased a new iMac and bought ProCare to bring all of my important documents from the old iMac to the new iMac. Since bringing home the new computer, I can only receive e-mail. Here are a few of the specifics:
We use comcast and have a wireless router in the house. I have tried connecting directly to the modem and wirelessly. I have tried using no authentication and authentication. I have tried using SSL. I have made sure the ports are correct for each of these settings. I have deleted the outgoing servers and reentered them. I have added a new account. That cannot send mail either. I also have an 14" iBook. I can send and receive mail from all accounts on that computer. To add to the confusion, I configured Entourage to send and receive e-mail today and it works with out any problems.
I am worried a corrupted e-mail came from the old computer?!? Is that possible? I think I have narrowed it down to the Mail application itself. Is there a pref file I should trash? I am confused as to why I can receive but not send? Another detail. When I hit send, it simply puts the file in the drafts folder. It is not as though the server is busy and puts the file in the Outbox.
Any help would be great. It is hard to get to the store for the genius to trouble shoot the issue.
Thanks in advance,
Debbie

When I hit send, it simply puts the file in the drafts folder.
What do you mean? The message is already in Drafts when you compose it, isn’t it? Does clicking the Send button actually do anything? Is it enabled at all or is it grayed out? Can you type the content of the message normally?
Proceed as follows:
1. Open /Applications/Utilities/Console.
2. From the File menu, choose either Open Console Log, or Open System Log, or both, so that Console displays the contents of both system.log and console.log.
3. Try to reproduce the problem and look at the bottom of the Console windows for messages that might be written there as a result. They may provide some clues.

Trying to set up mail.. will receive but not send

Trying to set up mail.... will receive but not send. Already called internet provider. They said ask Apple.

Hi ...
Mac Pro, Mac OS X (10.7.2), Lion.
From the Lion Help viewer ...
If you can’t send messages
If the Send button is dimmed or you see an alert that your message can’t be sent using the outgoing mail server, you might not be able to send messages. Here are some things you can try:
Make sure the outgoing mail server is specified correctly, as directed by your email service provider.Verify your outgoing mail server
If you try to send a message and a dialog appears saying you need permission, an administrator has limited the email addresses you can correspond with. Click the Ask Permission button.Request permission to send messages
Choose Window > Connection Doctor, and follow any instructions displayed in the Details column. Check whether there is a problem with your outgoing mail server or a firewall, if applicable, or if there was a login failure. If the Connection Doctor indicates a firewall problem:Verify there is no firewall software blocking email traffic on port 25, 465, or 587.Check whether you’re affected by another firewall. This could be either software installed separately from Mac OS X or built into an Internet sharing router, or software administered by your Internet service provider. Contact the appropriate person to find out whether a firewall exists.
You may be able to send messages from only a certain location. For example, if you send messages from school, you may not be allowed to send messages using the school’s outgoing mail server when you’re at home. Or, the email service provider may allow you to send messages but with stricter settings (such as requiring a name and password). Get the information you need from your provider and then change the outgoing mail server settings in Mail preferences.

Conditional routing - 1 sender to 1 receiver but with multiple locations

Similar Messages

Maybe you are looking for