Conditional tags displaying incorrectly in printed document output

I have a project that has several conditional tags. When I generate the project in Flash, the flash output displays the conditional tags correctly; however, when i generate the project as printed documentation, the TOC displays additional topics that are outside of the conditional tags defined to display. I have checked the defined outputs for both the flash and printed documentation and they are the same/correct. I use to work on RH6 and never had this issue until i converted to 8. The defined conditions have not changed since the conversion. I have uploaded the 8.01 patch and the issue is still present. Can someone please assist?

If a project has ten topics with all ten in the TOC and two have tags applied, when you generate the help eight topics will be generated and the TOC the user sees will show eight topics.
Now switch thinking to printed documentation, the first time you create it that TOC will show the same ten topics but the document will again only contain the eight untagged topics.
That assumes in both cases you use a build expression that excludes the tags.
If I have understood you correctly that explains why you see ten topics in the print layout but only get eight in the document.
Note too that if you later add items to the TOC for the project, they are not automatically added to the print layout as well. After the first generation of the printed documentation, the contents are no longer synchronised.
Does that cover what you wanted? If not, tell me where I am not following you.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Similar Messages

  • Xml out tag displays incorrect results

    Hi, I am reading a RSS feed using JSTL and i am using <x:out select="description" /> tag to read the value associated with "description". The returned value is html image tag. Instead of processing the image tag, IE does shows the image html tag itself like below
    <img src=http://xxx.com/index.aspx?isbn=9780268033729%3b0268033722+(pbk.+%3a+alk.+paper)%3b02680/SC.GIF><br><br><b><i>Title:</b></i> Character psychology and character education / edited by <br><b><i>Imprint:</b></i> Notre Dame, Ind. : University of Notre Dame Press, c2005.<br><b><i>ISBN:</b></i> (pbk. : alk. paper);02680
    How should i get rid of this?

    What is the HTML source of this code?
    I think it's probably being printed out as > and < which causes the browser to not interpret it as a tag but as the greater than and lesser than symbols.

  • Writr off accounts not display in print document (ISU BILLING)

    Hi all,
    I got the problem with write off when a customer is changed to an indigent customer all their debt has to be written off which results their account to R: 0. The invoice does not pick up all write offs with regards to write off reason 11-Indigent accounts which cause a lot of invoicing errors.
    Please give me advice
    Thanks
    Ashok

    Thanks for your reply iam happy for that, i need some clarifications about this issue...
    when am i invoicing particular this account  the total amount of write- offs not display in the print  documents.
    Please advice me .
    With Regards
    Ashok

  • Conditional tag identifier in Word?

    I am looking for a possibilty to define conditional tags in my connected Word documents via the Word style-definitions. Does anyone know whether that is possible an how?
    Could not find any hint in the documentation.
    Thx!

    I've just found a reference to the following methods for applying conditional text in Word:
    * Styles with hidden text using different templates
    * "includetext" fields that take content from different sub-documents
    * Macro-controlled conditionals
    * The IF field
    I have no experience of using any of these though. I have also not tested whether these would come across into the RoboHelp output when you update the link. You'd also have the issue of training your users on how to set this up and use it. It doesn't sound like a totally straightforward end user task.

  • PDF displays incorrectly within embedded web frame

    pdf files in an embedded frame using iframe tag display incorrectly in Firefox V.22 and earlier;
    On opening the webpage, the pdf is displayed too large.
    The pdf displays correctly only after refreshing or reloading the webpage.
    In Internet Explorer, Safari and Chrome, the pdf displays correctly when one first views the page.
    I have already reset Firefox to use Adobe Acrobat plugin. The scaling still works only after reset.

    Make sure your not Zoomed the PDF File
    Hit > CTRL + 0 (zero) for Normal view,
    Try to use the In-built PDF Viewer
    *Firefox > Tools > Options > Application > Search for "PDF" > Preview in Firefox
    If your facing the problem, please provide the screen shot of that.

  • Condition Dependent Document Output

    Hello, all
    Please help me,
    We have extended classic scenario in SRM 5.0.
    May I to use Condition Dependent Document Output in Spro
    if  I need  to print 2 smartforms for one purchase order?
    Best regards,
    Guzal

    Hello, all
    I'm solved a question. I'm used the BADI BBP_OUTPUT_CHANGE_SF.
    Best regards,
    Guzal

  • Using Multiple Conditional Tags with Multiple WebHelp Outputs

    I have a project that I have created for a web application. Within the web application, there are 3 types of customers (Commercial Accts, National Accts, and Tier 1 Customers).
    I have tagged each help topic that is associated with the help topics I have created.
    Then, I created 3 webhelp outputs and 3 TOCs for each customer type.
    My goal is to publish the project, where each customer type has their own generated output. Doing it this way, what is listed in the TOC help topics for each customer type is not displaying correctly.
    Example: National Accounts TOC
    What is generated:
    I have tagged the help topics within the TOC to the appropriate conditional tag. Please help. Any advice? I can also be reached at [email protected]

    I have a project that I have created for a web application. Within the web application, there are 3 types of customers (Commercial Accts, National Accts, and Tier 1 Customers).
    I have tagged each help topic that is associated with the help topics I have created.
    Then, I created 3 webhelp outputs and 3 TOCs for each customer type.
    My goal is to publish the project, where each customer type has their own generated output. Doing it this way, what is listed in the TOC help topics for each customer type is not displaying correctly.
    Example: National Accounts TOC
    What is generated:
    Please help. Any advice? I can also be reached at [email protected]

  • Error message 'Display only possible for print documents'

    Hi All,
    This issue is with the transaction code ME21N. When the user clicks on PRINT PREVIEW  it gives an error of 'Display only possible for print documents'. When the user clicks the MESSAGES tab and then COMMUNICATION METHOD tab it gives an error 'No communication data has been defined for transmission medium 6'. The vendor is not getting the order. Does anyone has any idea of what these error messages mean and where should I look further?
    Thank you,
    Regards,
    Shanu

    Hi
    this seems tobe relates to print program "" ask your ABABer what program he has written to send the PO to vendor your problam willbe solved.
    the moment you give the print it will ask the printer by  default LP01 then print immediately check you need to do that.then beground print program and partner you need check. whether this out type you have assigned to this partner or not (vendor).  check complecte condition technic.diffnettly it will works.
    i hope you have understood
    thanks &Regards

  • 4650dn printer changing document output from print preview

    recently installed 4650dn printer set up was a breeze, then suddenly the printer started changing the document output like there was an internal setting overriding the software settings.  almost as if it was confused about the orientation of the paper.  i am running vista with the print driver PCL 5.  i have tried restoring factory settings, tried different software, finally got it to work in MS word but prefer to use MS publisher, adobe illustrator etc.

    Hi Narasimhan,
    Yes, your guess is correct. We have tried out the possibility of controlling the print from the user status configuration side of things, but as the user status is at an Operation level, the system status at the header level still gets set, confusing the user that a print was created.
    Any other ideas / alternates ?
    Cheers,
    Ashok.

  • Errro in Display print Document

    Hi ,
    While display the Print Document T-Code EA-40 , I am getting Following Error ,
    *"Payment medium ID X in company code UINF, country E does not exist "*
    Kindly guide me to resolve the error.
    Regards
    Sgar

    Sagar,
    I do not have active ISU system with me. However I 'd suggest you configure payment medium ID in IMG\Utilities\Billing....u need to maintain these values.
    Rgds
    Rajendra

  • When printing document and comments output is only the comments

    When I select Print document and comments (Ctrl+T)in Acrobat 6 and have my "Print with:" set as Documents and comments the output is only the comments with their location in the document. The original document however is not printed. How can I prevent this?

    So, does the bursting process print completely independent of the style/driver setups in EBS? If that's the case, then I will have to check with my sysadmins on the printer setups on the Linux server like you mentioned.

  • Choose Printer for Output - Condition records

    Hi all,
    We are maintaining condition records at inventory management, shipping,pick list & pack list.
    at the time of print,can be able to choose the printer.  Is that feasible?  Can a condition record prompt the user to choose a printer for the output?
    Can anyone help me out..

    Hi,
    When you maintain your condition master records, (VV11, VV21, VV31) you can maintain which printer you want to print via the button option "Communication"
    Field - Output Device"
    Under that field you can give exactly which printer you want to print this output.
    Else what you can do is, Set this field as LOCL, which means the local printer of the user who is printing these outputs.
    Then in the local machine set the required printer as default printer. (This is a Windows setting). Then when he/she try to print an output, SAP goes to the LOCAL printer and from there it find the default printer of the user machine.
    You can use one of above!
    Hope this helps!
    Best regards,
    Rahal

  • In the mp3 files are displayed incorrectly Russian tags!

    Hello! In the mp3 files are displayed incorrectly Russian tags! As confirmation of sending you a screenshot! What to do? http://fastpic.ru/view/65/2015/0401/94da06b63b4f615fa249661f188a4ea3.png.html

    Hi Treenr3,
    Sounds like you have been on the right track with regard to troubleshooting this issue. It may be worth going over the font troubleshooting in the following article, just to double check (it refers to a previous version of iTunes, but the troubleshooting steps should be similar).
    iTunes 9: Font text is incoherent or appears in a different language
    http://support.apple.com/kb/TS3042
    It may also be worth trying some isolation troubleshooting in new test user account with just a couple of the tracks that are having issues to see if it persists.
    Isolating an issue by using another user account
    http://support.apple.com/kb/TS4053
    Cheers,
    - Brenden

  • Condition Dependant Document Output in SRM 5.0

    Hi,
    My requirement is to conditionally suppress the sending of the PO output if the action profile type is MethodCall (XML) and the initial PO send completed successfully. This means that on any subsequent change to a PO for this profile type, do not send the output.
    If I create a start condition for the Method Call process type, the output record is created but not sent as expected.
    Because the BOR object BUS2201 doesnu2019t have the required attributes to meet my requirement, I extended it by adding the version_no attribute.
    When testing BUS2201 via SWO1, the custom attribute is visible and populated. When I create the desired condition, the custom attribute is available for selection. When I create the PO the system sends the XML output. Then when I subsequently change it, the system still sends the output. Itu2019s as if itu2019s not recognizing the custom attribute in the decision to determine whether to process the send action.
    Has anyone successfully implemented this type of solution?
    Thanks,
    Jerry Martinek

    The solution to conditionaly suppress the PO output generation using a custom attribute seems to be working. Don't know why but would guess that it might have been somekind of a buffering issue as it worked the next day.

  • Headings are duplicated in Printed Document

    I noticed that some headings in my Printed Document were
    duplicated. I investigated and found that topics used as Books in
    the TOC had that problem: The first heading was duplicated in the
    Printed Document. I also happened to use the first heading as the
    topic heading. What is the solution to the problem?
    I know I can delete such headings in the Word document after
    the Printed document is generated.

    Reading the other replies - I have one further comment.  You can change the heading - but that is extra work and might confuse the end-user. More, it confounds QA...best, I believe is to highlight the heading and remove the duplication by tagging it as I previous wrote.
    However - this is only in relation to the issue of there being duplicate headings because of the TOC entires.
    If you are talking about duplicate topics - this also would be a result of the topic "appearing" in two places in the TOC. In this case, you can accomplish the same thing by tagging the TOC entry and appying a conditional tag, or building a separate printed documentation TOC and an output SSL for that.

Maybe you are looking for