Conditions Tab to be in display mode

Dear Friends,
There is a unique requirement I have come across where the Conditions Tab in the Sales Order and the Billing Document should be in display mode only and that too only for 2 scenarios. The reason I cannot go to the Condition Type and make the necessary settings is that, the same Condition Types are commonly used in the Pricing Procedure of other scenarios. So, if I make the changes in one condition Type, it will affect the other Pricing Procedure.
I cannot copy the Condition Types in Pricing Procedure and replace the existing ones because the BI reports will be afftected.
Kindly suggest a solution where even in create mode of the Sales Order or Billing Document, the Conditions Tab is in display mode.
Regards
Vineet Jain

Hi Anil,
Please refer to OSS notes:
105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
USEREXIT_FIELD_MODIFICATION
USEREXIT_PRICING_CHECK
USEREXIT_FIELD_MODIFIC_LEER
USEREXIT_FIELD_MODIFIC_KZWI
USEREXIT_FIELD_MODIFIC_KOPF
1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
Regards,
Marcin

Similar Messages

Condition Type Values are in display mode during PO amendment

Dear Friends,
I have this issue in import PO.
1. Process is we created an import PO with all necessary values filled under respective condition types to arrive at assessable value but Local freight cost is not known at this point since values are made clearer only after complete clearance of the goods from customs..
2.MIRO for customs done
3. PO amendment needs to be done to fill the values for the local freight & clearing but these condition types are in display mode.
Pls kindly guide me as to what should be done in this case?
thanks
nandu

Hi,
Once you done the MIRO for customs duty, then all the Planned delivery costs will be captured during this MIRO, the condition type will be in display mode in PO.
if you want to amend the PO with local frieght is either you need to reverse the MIRO captured otherwise you need to add the unplanned delivery costs during the MIRO for second time & can pay the same to the Local frieght vendors.
rgds
gsc

I am Not Getting a Additional Tab in ZMIGO in Display mode

Dear Gurus ,
                      I have Impelemented a Migo Badi and Created a Additional Tab in MIGO . The Additional Tab is getting Displayed in Create Mode but the same is not getting in Dispay Mode . Can Any Body help me for the same .
                                  I have Created two screen for the same .
0001 is for Created and 0002 is for Display mode . And in PBO i rave checked the condition for the same which i am pasing below for your refrence . Can any body please help me .
READ TABLE gt_scrn_active INTO ls_scrn_active
                            WITH KEY line_id = i_line_id .
CHECK ls_scrn_active-active EQ 'X'.
External subscreen:
The content of global field G_NO_INPUT (set in method MODE_SET) will
influence the number of external subsreen:
IF g_no_input IS INITIAL.
    e_cprog   = 'SAPLZCFG_JEWELLERY'.
    e_dynnr   = '0001'.                     "External fields: Input
    e_heading = 'Additional Unit'(004).
ELSE .
    e_cprog   = 'SAPLZCFG_JEWELLERY'.
    e_dynnr   = '0002'.                     "External fields: Input
    e_heading = 'Additional Unit'(004).
ENDIF .
Regards
S.B.Shankar

hi,
just i basice ? have you checked the status of BADI is it implemented.
Atul

Conditions not appearing in the display mode of Purchase order

Hi,
We are facing an issue where in the display mode of Purchase order,if I click on the conditions tab in the item details, Iam getting a blank screen. But if I trigger the pricing procedure in the change mode for eg. by changing the quantity or price, the conditions are appearing.
I want to know why the conditions are not being shown in the display mode. All the PO's are using the standard pricing proceduresRM0000.
Also when I trigger the pricing in the change mode for some POs the condition types like PB00, NVAS etc are appearing twice, in some POs the condition types are appearing thrice and in some all the condition types are appearing four times.
I have checked out some OSS notes like 798449, 456690 and 772035 but could not find the solution.
Any pointers to this will be eagerly awaited and highly appreciated.

Hi Ramachandra,
The problem on not being able to see details in condition tab is due to lack of authorizations
prasanna

Conditions Tab should not be displayed in the sales order.

Dear Gurus,
My client wants to hide the conditions tab (header & item) in the sales order while in display mode.
Because his dealers should be in a position to see the pricing strucutre.
Pl guide me how to do this with transaction variant.
Thanks & Regards,
Sreehari

You can create a transaction variant for VA03 and hide the tabs using SHD0. You can also assign it to a separate transaction code if it meets your requirements.

MIRO - Payment Tab Payments Terms Field (Display Mode)

Hi,
My requirement is to make the MIRO - Payment Tab> Payments Terms Field into Display Mode.
How to achieve this.
Regards,
Baskar

Hi,
With the help of the Screen Variant, you can able to set it.
Thanks,
Log.

Part2 tab in MIGO at display mode not visible

Hi Experts,
After capturing part 1 in MIGO and posting part 2 in J1IEX, part2 tab in MIGO display mode is not visible after a few days.
It appears immediately after posting part2 in J1IEX but if we refer the same material document after a few days pat2 tab is not visible.
We are in ECC 6.0 EHP4 recently upgraded from 4.7
Kindly reply
Regards
NDS

Hello,
Follow the below steps to manually regenerate of enhancement spots.
1)     MB_DOC_BADI_INTERNAL
2)     MB_GOODSMOVEMENT
3)     MB_MIGO_BADI
Standard MIGO enhancement spots are not getting regenerated which contains the code changes to update excise tables.
if you want to manualy regenerate, through SE18 generate,
if you want to automatic contact Basis guys,
Regards
Mahesh Naik.

Condition tab Change mode in Sales Order

Hi,
If i want to create a sales order with manual condition record. it appears in display mode not in change mode. If i select from the list of conditions types its not getting selected and its not coming in the condition type list. I put the check mark as manual in v/08 ad put the manually in v/06 also.. please give me right feed back so that i can handle it. and please tell me. were is the controls for a sales document.
thanks and regards,
Neo

Sorry, i could not follow your issue. Please explain in detail.
You have a pricing procedure with 2 condition types, PR00 and FD00. When you create a sales order do you want both condition values to be given manually or only one of them?
What is your issue here? Are you able to see both the condition types in the Conditions tab or not? If you cannot see, are you able to create them through New Entry or not?
Are you working on a client project with a large team or are you working on a practice client?

Import PO- Condions of Condition in Display Mode of Customs

Dear All,
While creating an Import PO in Production, the Item condition of Customs showing in Display Mode.
JCDB
JCV1
JCV2
J1CV
JCD1
JCD2
While its coming some value in Conditional Value u2026..Not getting from where itu2019s picking as I have checked its all showing also in Header Condition.
I am not able to give the manually percentage for all the above condition as all are in display mode. I have check Condition types and Pricing...Itu2019s also are perfect.
While same think is working perfectly in Dev.
Pl suggests how it could be rectified?
How it could be in changeable mode for Import PO during creation.
Regards,
Jyoti

Dear Indarnil,
I have check ..evrything is o.k..
even in Pricing:
                                                                                Mannual      Requ     Statics
JCDB     IN Basic Customs     84
JCV1     IN CVD     84     90
JCV2     Ed Cess on CVD     100
J1CV     HEd Cess on CVD     100
JCD1     IN Custom Edu Cess     90     120
JCD2     IN Custom HEdu Cess     90     120
Nothinng has made ticked as in Dev same pricing procedure is working without Tick in the above Mannual.
Regards,
Jyoti

Condition tab in display mode while creating sales order.

Hi Guys,
When I go to create a sales order the condition tab shows all the condition types in grey, irrrespective of its being manual or mandatory. I know it has nothing to do with V/06 or standard pricing transactions. So I changes the item categry.Again used the same order type, same customer , same material and same sales area. Once I change the item category to Zxxx, Condition tab becomes changeable. So I concluded that item category is the culprit. But the question is Which part of item category is influencing it ?
Please help.
Regards,

Hi Phani,
While creating sales order (VAO1), I go to item level and click on condition tab. I see all the things in this tab grayed. Nothing is changeable. I changed the item category, while the pricing procedure was same as the old one. Condition tab became changeable. So it has something to do with item category. But what is that one thing missing in my item category which is making condition tab grayed out..?
Regards,

Delivery cost condition type in PO coming as display mode

Hi Experts,
In my Purchase order having delivery cost condition types, for ex freight. For this PO i have done Goods receipt. PO all the delivery costs are showing in display mode. i have reversed the Good receipt.Again also all the delivery costs are showing grey mode in PO.
I want to make as editable for this PO after reversal of GR. Kindly do the nedful.

HI makarand ,
the condition type you have created is this assigend in Item Level or Header level. Plz check this in Header and item Conditions Tab. If you can assigned Delivery cost condition type in item level than it will changed by item level itself.
In Header Level it displays in Display Mode.
Vraj

Condition record in display mode (Non editable)

Hi,
We have upgraded our system from 4.7 to ECC 6.0.
In ECC 6.0 We have below condition types in case of India import having
different delivery vendor (Customs.) other than supplier.
1.JECV 2.J1CV 3.JADC
In old version it was not there.
Now ,for old pending Import POs vendor tab is in display mode,while in case of new import PO I am able to edit the vendor.
Please guide me , why the old import POs are not editale and t
Regards,
Gitesh
Edited by: gitesh mahamuni on Nov 1, 2010 12:16 PM

Hi SAP FC ,
PO is still not processed , also neccassary changes done to condition types like : C Manual entry is priority.
Is there any note for above.
Regards,
Gitesh

How to make the condition tab screen to inactive mode while posting VF01

Hi Experts,
Im an Abapper, I need your advise here.
Please understand my issue/requirement that, I have to make the item conditions tab in display or deactivate mode to prevent users to change or create the price or conditions while posting VF01.
As std, system allows users to create or change the prices/qts and also add new conditions. My client needs to make it as display mode for all type of postings in VF01.
Please guide me, how to arrive it through Exit or Enhancements.
thanks & regards
Sankar.

Dear sankar babu
1) In VTFL under your delivery to billing header choose your item category for pricing type maintain as C and that means copy manual pricing elements and redermine others if it is delivery related billing
2) In VTFA under your order to billing header choose your item category for pricing type maintain as C and that means copy manual pricing elements and redermine others if it is order related billing
3) If in your pricing procedure if there are some condition types for which condition records are maintained make sure t code V/06 in its details (only for automatic conditions) changes which can be made tab for manual entries maintain D(not able to process manually)
Steps one and two are sufficient enough if all the condition types are manual condition types in your Pricing procedure
I think this will work for you as i have tested this already
Regards
Raja

Condition tab in STO is not getting displayed

Hi,
While creating STO, the Condition tab in Line Item is not getting displayed.
Why it is not getting displayed? Where do I need to change the configuration?
Do I need to maintain any Pricing Procedure in MM?
Please guide.
Regards,
PK

Hi,
Check whether you have maintained Schema determination for respective document type and STO.
below mentioned is the navigation path to maintain the same.
> spro - materials management - purchasing - conditions - define price determination process - define schema determination - Determine Schema for Stock Transport Orders
Here maintain the Purchasing Schema group , Document type & pricing procedure for STO.
Standard Pricing procedure for STO is RM2000.
Hope this is helpful..
Regards,
Vamshi

Excise Invoice Tab not appeared in MIGO Display mode

Dear All Guru,
we are facing a problem after posting excise invoice,we are not able to see excise invoice tab in MIGO display mode .We are done all necessary patch uploading but there are some ABAP programming change related to MIGO display.
Pls, send necessary note or some clue.
Thanks,
Abhijit

Hi Abhijit,
How you posted the excise invoice, have you done this posting in MIGO transaction or in J1IEX transaction.
If you have not gor the Excise tab in MIGO while posting you cann't get the same after posting also. You need to do settings for this in IMG settings for the excise group customization then you will get this excise invoice tab in MIGO
Hope you understand.
rgds
Chidanand

Conditions Tab to be in display mode

Similar Messages

Maybe you are looking for