Conditions while creating views

Hi,
I have 2 db tables A and B. And I need to have a condition while joining these two tables. i have a field called date in A and date1 and date 2 in B.
The condition i would like to incorporate is A-date should lie between B-date1 and B-date2 (B-date1<A-date<B-date2).
I've tried out Maintenance Views and i can only give a comparative value in the selection conditions (say A-date eq sy-datum).
Can anyone suggest me how to go about this.
Thanks in advance...
Naren

hi
good
go through these links which ll gie you idea about view with join statement.
http://www.braincorp.com.au/products/information-technology/sql/database-concepts-and-technologies/database-technologies-part-2-introduction-to-sq/
http://dev.mysql.com/doc/maxdb/en/6d/117c44d14811d2a97400a0c9449261/content.htm
thanks
mrutyun^

Similar Messages

VKP0 is not to be maintained as mandatory condition while creating IDOC

We have a very awkward need from our client.The bussiness doesnt want the condition type VKP0 to be mandatory condition while creating IDOC for article master data.
In the bussiness terms they send some articles to POS without creating price.They dont want to have the value of KONWERT field as 'ZERO'..
We have upgraded ECC 5.0(IS Retail) to ECC 6.0(IS Retail).It was techinical upgrade hence no functional configuration has been done.
Moreover we have compared POS outbound profile in ECC 6.0 with ECC 5.0.Every configuration is same and all required prerequisites for POS Outbound profile are same in both the versions.The Idoc in ECC 5.0 is getting created even though the price of the artilce is not required to be mainatained.
All of us know that if prices are not maintained system shows'X' mark in price field in T.Code WPER2.
But,instead the IDOC is getting created in ECC 5.0.
Please help us to make the IDOC creation possible in ECC 6.0 even without creating the price.
Edited by: ajay das on Nov 15, 2008 8:00 PM

Hello Ajay,
Are IDocs for other transactional data getting created? In case these are, you can try to check the message control settings.
Regards,
Nimish

Getting Error ORA-00604 While Creating View from front Ent

Hello All,
I am getting ORA-00604 while creating view from the front end. And some time I get Maximum cursor open, It is ok amy be I am opening cursors in while loop. While ORA-00604 is giving lots of truble to me. In help it said to contact Oracle service, I dont know how to do that. Help me.

Please post your view definition including the complete error_message and also the relevant parts of your code with the while loop.

Getting prob while creating view in webdynpro ABAP application

Hi Guys,
I am facing a problem while creating a view for webdynpro ABAP application. It is giving an error as "ICF service "/sap/public/bc/WebDynpro/ViewDesigner" inactive".
can anybody let me know how to solve this problem.
Thanks In Advance
Regards
Ravikumar

I think check Internet explorer Tools ->Internet Options ->Connections.>Lan Connections> if the proxy or anyting checkbox is clicked coz it doesn't work with Internet on .
Please reward if useful.

Bug in BC4J test query while creating view based on query

In BC4J while creating a view from query if we test our query , BC4J modify the query with the following one :
"SELECT * FROM ( " + ourQuery + " ) where 1=2;"
so for the Query like "SELECT ename,ename from emp" which is a valid query it modifies it to
"SELECT * FROM ( SELECT ename,ename from emp ) where 1=2;"
which is an invalid Query and BC4J get a SQLException:column ambiguously defined and Test fails
BC4J does this modification in query because it doesn't want to Fetch Data from Database and add the where clause
to the query but in Cases like above this modification doesn't work properly.
one way to solve the problem is by giving alias name to the columns of query.Is there any other way to do the same as my query is completely Valid and i don't want to change it at all ?

Hi Jan,
Actually I am getting my query at run time and based on that I am creating a view.This Query can be given by User of my application and at that time it'll be very painful for me to handle that.
It's definately a Bug in BC4J as they should not modify the query in this way.Thanx for ur interest in my problem.

Table aliases while creating views in KM

Hello All,
While executing an interface I noticed that it failed on the LKM step -
Create View on Source
(LKM MSQL to MSQL)
On investigation, I found the error was because of an in invalid alias (alias created was a sql server keyword) that ODI had assigned to the source table. I extracted the code from the KM and I am hoping someone could direct me on how I could modify the KM so that the alias ODI creates is different from what its currently set to.
TIA
MN

MN you dont need to modify the KM , when you click on the required Datastore , you will find the alias name , there change it accordingly or in the Datastore itself. I think that should help you .

How to Change Conditions while creating PO

Hi ALL
While creating the PO, i need to change the value of certain condition type.
I am able to do for PB00 condition, but i need to change it for other conditions.
For example, if there is any discount condition, i need to be able to change the value, when PO is getting created
Can you please help on this
Regards
Madhan Doraikannan

Hi Madhan!
Your scenario is getting more and more complicate, but so you will have better answers.
I didn't found methods GET_CONDITIONS, SET_CONDITIONS in ME_PROCESS_PO_CUST (Customer enhancement?!), but most probably no changes will be done by these methods, which aren't allowed online in transaction.
But why do you use a transaction dependent BADI instead of pricing exits / pricing procedure?
If you need something out of condition reach, you can use exit with function module ME_FILL_KOMP_PO. Communication structure KOMP can be used in a formula to fill a condition without access sequence. Then condition exclusion groups can handle allowed / not allowed condition combinations.
Regards,
Christian

Call procedure while creating view in hana.

Can we call procedure while creating a attribute view like
CREATE VIEW "PAYROLLDBTEST"."@HourTransactionView"
"DocEntry",
"DocNum",
"EmpID",
"EmpCode",
"FullName",
"TableName",
"TranName",
"U_FromDate",
"U_ToDate",
"NoOfDays",
"U_FromTime",
"U_ToTime",
"NoOfHours",
"OvertimeHours",
"UnpaidDays",
"Weekends",
"Holidays",
"U_Remarks",
"U_BatchNo",
"ProjectCode"
) AS SELECT
T0."DocEntry" AS DocEntry,
    T0."DocNum" AS DocNum,
   T0."U_EmpCode" AS EmpID,
CALL PAYROLLDBTEST.GetEmpCodeFromEmployeeID('EmpID') ,              (getting syntax error here).
    GetEmployeeFullName("@TRANSACTION_HOURS".U_EmpCode) AS FullName,
      T0."U_TransactionType" AS TranCode,
    GetHourTableName("U_TransactionType") AS TableName,
     GetHourTransactionName("U_TransactionType") AS TranName,
    T0."U_FromDate",
    T0. "U_ToDate",
      DAYS_BETWEEN("U_FromDate", "U_ToDate") + 1 AS NoOfDays,
      T0."U_FromTime" AS U_FromTime,
       T0."U_ToTime" AS U_ToTime,
    IFNULL("U_WorkHours", 0) AS NoOfHours,
     IFNULL("U_OvertimeHours", 0) AS OvertimeHours,
    IFNULL("U_PaidDays", 0) AS PaidDays,
     IFNULL("U_UnpaidDays", 0) AS UnpaidDays,
    IFNULL("U_WeekendsCount", 0) AS Weekends,
     IFNULL("U_HolidaysCount", 0) AS Holidays,
      T0."U_Remarks",
       T0."U_BatchNo",
    T0."U_ProjectCode" AS "ProjectCode"
    FROM
    "@TRANSACTION_HOURS" T0
    INNER JOIN
    "OHEM" T1
    ON
     T1."empID" = T0."U_EmpCode";

Hello,
The problem could be a SAPGUI related problem... Whats the current sapgui patch level ? Does it work when you try on another wokstation with the same user ?
Could you please use SAPGUI 720 and update your patch level to 7 ? Then check the behaviour again.
Best regards
Rene

Error while creating view

Hello,
I am trying to create view which is based on multiple source tables and I am receiving following error
Internal error: An expression services limit has been reached. Please look for potentially complex expressions in your query, and try to simplify them.
Can anyone know how to resolve this.
Thanks,

See MS Support for how to solve it:
Error message when you run a query in SQL Server 2005: "Internal error: An expression services limit has been reached"
Olaf Helper
[ Blog] [ Xing] [ MVP]

Error while creating view in component - BT115H_SLSO

Hi All,
When I am creating view in the BSP Component workbench(T/code: BSP_WD_CMPWB), I
am getting the error "Invalid GUI INPUT DATA :INVALID XMLBLOB DATA" shot and suggest me how to come out of this error.
Component: BT115H_SLSO
Regards,
Praveen

Hello,
The problem could be a SAPGUI related problem... Whats the current sapgui patch level ? Does it work when you try on another wokstation with the same user ?
Could you please use SAPGUI 720 and update your patch level to 7 ? Then check the behaviour again.
Best regards
Rene

Select option "Show this View : in Folder of Content type : {Custom Content Type Name}" while creating view using CSOM

Hi,
I am trying to create "View" in a Document Library and need to enable following:
1. Mark as default View
2. Folders -> Show this view : in Folders of Content Type : {Custom Content Type name}
I am using following code which sets "in Folders of Content Type : " to "Folder" rather than selecting custom content type despite passing Content Type ID of custom content type.
code:
var itemContentTypes = clientContext.LoadQuery(web.AvailableContentTypes.Where(ct => ct.Name == viewContentType));
clientContext.ExecuteQuery();
var itemContentType = itemContentTypes.FirstOrDefault();
view.ContentTypeId = itemContentType.Id;
view.DefaultViewForContentType = true;
view.Update();
clientContext.ExecuteQuery();
Please highlight what seems to be missing?
Thanks
Sonal

Hi,
Before you set the content type ID for the view, you need to add the custom content type to the library firstly.
You can add the content type to library using OOTB feature “Add from existing site content types” in library settings or using Client Object Model.
Here is a code snippet for your reference:
var list = context.Web.Lists.GetByTitle(listTitle);
list.ContentTypesEnabled = true;
var contentType = context.Site.RootWeb.ContentTypes.GetById("0x0120");
list.ContentTypes.AddExistingContentType(contentType);
context.ExecuteQuery();
More information about add exist content type using Client Object Model:<o:p></o:p>
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.contenttypecollection.addexistingcontenttype%28v=office.15%29.aspx
Best regards,
ZhengyuGuo
Zhengyu Guo
TechNet Community Support

Error while creating views

Hi all,
Im creating a view with 2 CO tables(COSP &COSS),i gv join conditions as OBJNR,WRTTP,KSTAR,MANDT. after this i selected tab View/Fields then i selected my table COSP,wherein i selected the other fields which i want,then i saved and did a check and finally activated it.But after activation i get a error that all "<b>Fields are Evaluated as Key fields "</b> <b>The View ignores client dependency of the base tables.</b> After that i saw all the fields in View Flds tab are Checked as Keyfields.Please advice how to solve this error.
Thanks

Hi BI,
The first one is a warning and the second one is an error. The error can be cleared by including the MANDT field in the view from one of the tables. The warning "Fields are Evaluated as Key fields" is because, you have not included all the key fields of the base tables in the view. I mean to say if you include all the key fields from COSP and COSS, you can get rid of this warning. The warning means... since you did not select all the key fields of the base tables of the view, all the display fields of the view are treated as key fields. That is why you see all the fields marked as key fields. You can ignore the warning if you are getting all the required records in the view. Otherwise, include all the key fields from both the tables and the other fields can be deselected as key fields. Hope this helps.
Thanks and Regards
Subray Hegde

I want to write condition while creating table/maintaining table using SM30

Hello all,
I am creating table Z_CUST with only 2 fields Client, Customer number using SE11 transcation then maintain using SM30 transcation.
User should only be allowed to enter customer number that is in account group(KNA1-KTOKD) Z011. This validation should be performed during data entry.

Hi,
Crete the table maintenance generator for your Ztable.
below is the brief procedure to create table maintenance.
Table maintenance generator is basically used to do table operations like (insert, delete, modify...).
if you create table maintenance for your table it will build a module pool program, by using you do the above operations.
below is the procedure to create table maintenance generator.
1) Create one function group.
2) after activating your Ztable, choose 'Utilities'----> 'Table maintenance genrator'.
3) then give the authorization group and function group created abobe in the next screen.
4) Then choose the "create" button in your application tool bar, which will creates the module pool program.
5) then create one Tcode by chosing "Transaction with parameters( parameter transaction)".
6) in transaction field give "SM30", select the check box "Skip initial screen".
7) in the below of that screen you can find the "Default values" frame.
8) there under the "name of screen field" select the "View name' and 'update".
9) in value column against to "view name" give you table name, and against to "Update" put 'X' in capital letters.
save it then you can straight away use this newly created Tcode to maintain your table.
Note:- 1) make the modification while saving the data into your table using this newly generated program to carry out your validation (even though it looks like standard program; no need to enter the access key).
2) if you do any changes to your table and press the activate button automatically the table maintenace generator will be goes off, you need to create this again.
Reward if useful.
Thanks,
Sreeram.

Webdynpro error while creating "view"

Hi!
All,
I am trying to perform one tutorial provided on sdn website for webdynpro and title of which is "WDA Tutorial I: Getting Started with
Web Dynpro for ABAP"
I am using Netweaver 2004s on my desktop.
When I try to create a view on workbech , it returns with the following error message.
Service cannot be reached
What has happened?
URL http://runner:8001/sap/bc/wdvd call was terminated because the corresponding service is not available.
Note
The termination occurred in system KHA with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:runner_KHA_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Can anyone help me to resolve this error???
Cheers
Khalil.

Awarding points is a common thing here on SDN. It is a way to show thanks to those who contribute to your questions. Next to each response, under the answering person's name, there should be 3 radiobuttons. You can reward points based on the level of "helpfulness". 10 points if the answer helped to solve your problem, 6 points for a general very helpful answer, and 2 points for a helpful answer. When you mark as "Solved my problem(10 points), this awards ten points to that person and marks the thread as being solved. Since you have already marked this thread as "Solved on my own", that closes the thread without rewarding any points. You can simply reverse this flag, and then select the appropriate points for the answers. If no answers, solved your problem to your satisfaction, but you still solved the problem, you can award points(6 or 2) to the answers and mark the questions as "solved on my own". Hope this helps.
Regards,
Rich Heilman

How to get pricing conditions while creating Sales Order

Hi Guys,
When we create sales order using VA01, price is automatically determined using pricing condition configured.
My requirement is, I need to know what would be the price of a particular item.Say i put one item A with quantity x,can I get which price conditions will be applied and what value will come for them.I need this because I need to validate this price with some other price put in a file .

I would suggest to use the Exit because that will be less efforts and you can implment and debug it easily. Moreover, you can restrict it by any condition e.g. order type, order reason because all the internal tables are available at that point.
Whereas, accessing the access sequence is cumbersome process. You need to go to all the combinations (tables) in the access sequcen and try to find out the suitable match .
Regards,
Naimesh Patel

Conditions while creating views

Similar Messages

Maybe you are looking for