Conditon table missing

Dear all,
While doing PO, we are getting the following error:
Condtion table missing: Access 0003 30(Output purchase order)
What would be the issue?
Please suggest.
Thanks & Regards,
AR

Go to
SPRO - MATERIALS MANAGEMENT - PURCHASING - MESSAGE - OUTPUT CONTROL -ACCESS SEQUENCE - DEFINE ACCESS SEQ FOR PO.
Select Access sequence 0003 and Click on Access.
Go to New Entries and assign condition table 30 to this access sequence.
Hopefully this will solve your problem
Sheetal

Similar Messages

Taxes condition table - missing.

Hello Gurus,
We have one situation where in our client is facing an error while creating a sales order(trading)- the error : condition table missing access JST1(pricing- taxes)missing. what can be the causes and solution?
Regards,
Raj

hi
check the access seq JST1 from the following route
SPRO > Financial Accounting >Financial Accounting Global Settings > Tax on Sales/Purchases > Basic Settings > Check Calculation Procedure > Access sequece
There might b the condition table missing, either enter valid conditon table or remove the ACNO(acess no) from the JST1 access sequene.
reg
Deepak

Condition Table missing

Hi,
In sales order I am getting a Stop saying: "Condition table missing zz00 01 (output shipping)
Any ideas of how to solve this problem?

Hi Vamsee,
Looks like SD config made some changes to pricing conditions for sales order. If you are getting the error in development system, they would have deleted some pricing table which was there before and it is referred in some user exit. If you are getting the error in QA system/Prod, config changes are completely transported.
Please check condition table exists in the system, If not please inform the SD config contact.
Reward points if it helps,
Regards,
Anil

Condition table missing : Access Z002 50 ( Pricing Purchasing)

Hai SAP,
Need your help to assist me in the problem,
When i creating Purchase order, the pricing schema does not appear. when i click on the Analysis Button on the condition tab, system tall me that " Condition table missing : Access Z002 50 ( Pricing Purchasing) " .
why this thing happen ?

Hi
Check the schema group vendor for that vendor in vendor master
using that track the Pricing procedure to which it is assigned
then check the condition table for that access sequence z002
Regards
Amuthan M

Re : Condition table missing: Access Y003 10 (Output Inventory Management)

Hi
While doing migo using movement type 501 the following error is coming.
"Condition table missing: Access Y003 10 (Output Inventory Management)"
How to solve this.
Thanks
Anto

Hi
After creation of PO, any body chaged the access sequence?
Check this out in SPRO- SAP IMG- Material Management- Purchasing- Conditions- Define Price determination process - Define access sequence.
Regards,
Raman

SCCM 2007 Hardware Inventory v_GS_VIRTUAL_MACHINE table missing the PhysicalHostName0 and PhysicalHostNameFullyQualifi0 Columns

Hi All,
I went to run a query in SQL Management Studio the other day and realized that the
v_GS_VIRTUAL_MACHINE table missing the PhysicalHostName0
and PhysicalHostNameFullyQualifi0 Columns.
I reviewed the Configuration.mof and SMS_def.mof files and they seem fine. The Configuration.mof file has the below in it where it should be gathering the PhysicalHostName0 and PhysicalHostNameFullyQualifi0 parameters.
// Virtual PC
#pragma namespace ("\\\\.\\root\\cimv2")
[DYNPROPS]
class Win32Reg_SMSGuestVirtualMachine
    [key]
        string InstanceKey;
        string PhysicalHostName;
        string PhysicalHostNameFullyQualified;
[DYNPROPS]
instance of Win32Reg_SMSGuestVirtualMachine
    InstanceKey = "VPCKey";
    [PropertyContext("local|HKEY_LOCAL_MACHINE\\Software\\Microsoft\\Virtual Machine\\Guest\\Parameters|PhysicalHostName"),
                    Dynamic, Provider("RegPropProv")]
        PhysicalHostName;
    [PropertyContext("local|HKEY_LOCAL_MACHINE\\Software\\Microsoft\\Virtual Machine\\Guest\\Parameters|PhysicalHostNameFullyQualified"),
                    Dynamic, Provider("RegPropProv")]
        PhysicalHostNameFullyQualified;
[DYNPROPS]
class Win32Reg_SMSGuestVirtualMachine64
    [key]
        string InstanceKey;
        string PhysicalHostName;
        string PhysicalHostNameFullyQualified;
[DYNPROPS]
instance of Win32Reg_SMSGuestVirtualMachine64
    InstanceKey = "VPCKey";
    [PropertyContext("local|HKEY_LOCAL_MACHINE\\Software\\Microsoft\\Virtual Machine\\Guest\\Parameters|PhysicalHostName"),
                    Dynamic, Provider("RegPropProv")]
        PhysicalHostName;
    [PropertyContext("local|HKEY_LOCAL_MACHINE\\Software\\Microsoft\\Virtual Machine\\Guest\\Parameters|PhysicalHostNameFullyQualified"),
                    Dynamic, Provider("RegPropProv")]
        PhysicalHostNameFullyQualified;
I'm not really sure what to look at next and am hoping someone else has experienced this issue before.
I have looked at other customers running SCCM 2007 and compared the Configuration.mof and SMS_def.mof files, which look pretty much the same.
Thanks in advanced.
Andrew

Are they running on virtual pc or virtual server? Notice that I said virtual pc and virtual server, not Hyper-v. In CM12 this is fix and will show the physical server when running on Hyper-v.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Pricing table missing

hi experts,
when any purchase order is created in development server the system is giving error message :" condition table missing:Acess JST1 60(pricing taxes)
Can any one tell me what is the reason behind that? how to solve the error?
Sudipto

Hi,
thanks for your early response.
the error message no. is VE305
please help me out.
Sudipto

Condition table missing: Access JST1 60 (Pricing Taxes)

Dear All,
We had gone for the updation of patches related to 2007-08 budget changes. Our SAP version is 4.7EE.
We are getting the below message, when giving the tax code in purchase order creation.
"Condition table missing: Access JST1 60 (Pricing Taxes)"
TAXINJ is being used.
Please provide a solution on this issue.
Regards,
Venkat.

check all the condition type and there access sequences

Text from tables missing!!

Hi
I have single cell tables, which have a large amount of text. Hence the table cell text should flow to the next page. After checking outputs in digital editions, I found out that the table-cell data is shown only on the first page. After that, the whole text is missing, which was supposed to flow to next page. So cell-text over-flowing to next page is not supported?

Hi freddostein and welcome to our community
How are you viewing the output? Are you just opening the .SWF
and going from there or are you looking at it by opening the
associated HTML page that Captivate normally creates?
If you are viewing by just opening the .SWF, that could be
the cause. Try viewing using the HTML page instead.
Cheers... Rick

Licecache table missing Table MATRIXINDE does not exist in the database wit

Hello,
We recently done a system copy of our APO system, everything went well. in case of Livecache there are 2 problem
1) when we do the integration for LCA/LDA/LCA while we mentione the Livecache server it is not taking the host name , it is only picking the IP address of the livecache server. If we tried host name, it times out.
2) once we give the IP address as livecache server we can start the live cache server. Bure there is only two tables in it
when we run
transaction Livecache Check (/SAPAPO/OM03) we get the erro i.e.Table MATRIXINDE does not exist in the database with ID LCA
runtime error DBIF_RSQL_TABLE_UNKNOWN
When we look into the tables there are only 2 tables in it
AAPSYSNAME
LCA_WARNINGS
when I compare with other system...it is missing a lots of other tables..
We did re-initialized the livecache.
Appreciate your help in this

Hello Sudhir,
1) Did you create the SAP ticket where this issue is reported?
2) It's good to know more details about the APO version, liveCache/LCA versions on your
    source & target systems.
    What note or document did you follow to do a system copy of our APO system?
3) Please pay attention to the recommendations in the SAP notes:::
         877203     Post steps after the Homogenous liveCache copy usi u2026
         886103    System Landscape Copy for SAP SCM
Thank you and best regards, Natalia Khlopina

Pages 5.2 Table missing text when printed

I created a document with several tables. These tables contain algebra formulas with superscript. I read in another forum that the issue may be the use of the superscript. However their problem only occurred when printing the document as a PDF. I am having the problem printing from both Pages and as a PDF. Some superscript appears as it should. Not all missing text is superscript.
Any ideas? I hate to have to recreate this document in Word. I took me forever to create.
Mavericks 10.9.3
Pages 5.2

Known limitation with Pages v5.2. If you had Pages ’09 installed before the upgrade downgrade to Pages v5.2, it was moved to /Applications/iWork ’09.
You will need to export from Pages v5.2 as Pages ’09 in order to process your work in the older Pages version. You will also need to open the Pages ’09 document either through that Applications file chooser, or via the right-click, contextual menu Open with > Pages (4.3). Double-clicking with both Pages installed will default to using Pages v5.2.
LibreOffice is a free alternative to MS Word, and works better with Mavericks than does OpenOffice.

Tables missing in SQL Server 2008 for Hyperion Application

Hello Experts,
I am cuurently working on Hyperion Finacial close management (Account Reconciliation Manager) application version 11.1.2.3, O.S is Windows 2008 R2 and relational database is SQL Server 2008.
When I am trying to copy Account Profiles to a period say go to Manage->Periods->Right Click->Copy to Periods, I get the error:
Object arm_access is missing.
When I open SQL server studio, I can clearly see table 'ARM_ACCESS' but when I did a search on oracle support and google, I found out that it is a case sensitive issue and the table has to be in small letters.
So I created a new table 'arm_access' with all columns as there are in 'ARM_ACCESS' in SQL Server 2008, but it is not fetching any data.
Can anyone provide me the query that I can run to display the same structure and data for 'arm_access'?
If anyone is using the instance, he/she should be able to provide me the query that I can run in SQL server 2008 to populate the 'arm_access' table.
Appreciate your help as this is stopping my development work.
Thanks in advance.
Regards,
Sumit

Hi Sumit,
Its just a wild guess am not sure with this.
i dont have idea about query in sql server. but it oracle it would be something like create table targettablename as select * from sourcetablename.
Ideally it will not allow to create you a table with that name if its already exists i mean its case insensitive (. Even if you have created manually make sure the db user you created with has select privilage granted for all users or the user you configured in Financial close management) or the DB might not be having select privilage .
Note:Have backups in place when you are manually to manipulate or changing the database user.
Thanks
Amith

Hash Table Misses Are Expensive

I have built several Hash Databases with 80,000 records in them, and indexed on an ascii string (person's name). I am processing their audited history, and each person has several hundred events. At the receiving of a new event I first check to see if this person exists, and if not, add them to the employee hash database prior to adding their event information to a BtreeDatabase.
I have found that checking if the employee exists is by far the most expensive operation in my setup, and is directly related to sparsity. Calling the exists function on an employee that does not exist takes ~10-20 times longer than calling it on an employee that exists.
Why is the hash check so expensive, especially for non existant items? Is there anything I can do to improve this?
-Karl

Hello Eric,
My environment is configured as follows:
//Configure an environment.
var envConfig = new DatabaseEnvironmentConfig();
envConfig.MPoolSystemCfg = new MPoolConfig();
envConfig.MPoolSystemCfg.CacheSize = new CacheInfo(1, 0, 10);
envConfig.LogSystemCfg = new LogConfig();
envConfig.LogSystemCfg.BufferSize = 100*1024*1024;
envConfig.LogSystemCfg.InMemory = false;
envConfig.LogSystemCfg.AutoRemove = true;
envConfig.LogSystemCfg.MaxFileSize = 100*1024*1024;
envConfig.LogSystemCfg.ZeroOnCreate = false;
envConfig.LogSystemCfg.Dir = LogsDir;
envConfig.Create = true;
envConfig.FreeThreaded = true;
envConfig.DataDirs.Add(Dir);
envConfig.CreationDir = Dir;
envConfig.ErrorPrefix = Name;
envConfig.RunRecovery = true;
envConfig.UseLogging = true;
envConfig.UseLocking = true;
envConfig.UseMPool = true;
envConfig.UseTxns = true;
envConfig.AutoCommit = true;
envConfig.ErrorFeedback = ErrorFeedback;
envConfig.LockSystemCfg = new LockingConfig();
envConfig.LockSystemCfg.DeadlockResolution = DeadlockPolicy.MIN_WRITE;
envConfig.Register = true;
envConfig.TxnWriteNoSync = true;
envConfig.Private = false;
if (!Directory.Exists(Dir))
Directory.CreateDirectory(Dir);
if (!Directory.Exists(LogsDir))
Directory.CreateDirectory(LogsDir);
Env = DatabaseEnvironment.Open(Dir, envConfig);
My Database is configured as follows:
var dbConfig = new HashDatabaseConfig();
dbConfig.AutoCommit = Env.Env.AutoCommit;
dbConfig.Creation = CreatePolicy.IF_NEEDED;
dbConfig.Duplicates = DuplicatesPolicy.NONE;
dbConfig.FreeThreaded = Env.Env.FreeThreaded;
dbConfig.Env = Env.Env;
db = HashDatabase.Open("ContractDb", dbConfig);
var sDbConfig = new SecondaryHashDatabaseConfig(db, SecondaryKeyGen);
sDbConfig.AutoCommit = true;
sDbConfig.Creation = CreatePolicy.IF_NEEDED;
sDbConfig.Env = Env.Env;
sDbConfig.Populate = true;
secondaryDb = SecondaryHashDatabase.Open("IdtoContractDb", sDbConfig);
Currently misses are so expensive that I cursor the entire 200k record table and load it into a C# Dictionary prior to running and use its hash functionality which is extremely fast for both misses and existances (though the load and memory usage is painful).
I would provide db_stats if I could but for some reason it is claiming I have a diff build string and so I cannot produce a dump.
Let me know if anything jumps out,
thanks,
-Karl

SEM - CPM Data Table missing functionality

Hi,
We have recently upgraded to SEM - CPM 6.0 from 3.x. We are using the Management Cockpits.
In the older version, we were able to customize the properties of the data table and also print the data table.
But after the upgrade the customization and printing functionality of data table are missing. Did anyone encounter this issue and how was it resolved.
Thanks
Hemant

Hi,
Two ideas.
- Also assign the Objective to the Strategy and the Strategy to the Scorecard starting at 001.2005. Otherwise subelements wont be displayed.
- If this doen't work, try to assign an element with the periode 001.2005 to 012.2005. This might add a new entry in the used table instead of changing a current entry.
Regards,
Beat

Tables missing in DBSTATC

There are a few very large tables that are not included in the DBSTATC table.
I realize that I can add new entries but I am also curious why these tables are missing.
Does anyone know the mystery?

Dear shahid,
Please let me know why they were missing and what process you did.
If possible please provide the step by step instruction
Regards,
Amit

Conditon table missing

Similar Messages

Maybe you are looking for