Conduit Manager locked
I attempted to Hot Sync my TX with my iMac, and I keep getting "Conduit Manager Locked" instead of the usual items syncing.
I haven't got a clue as to what its trying to tell me.
The only thing I gave it a specific file for was Pocket Quicken, and it had no trouble at all with doing that.
Backup is Backup, Install is Install Files, iSync Conduit is See Conduit Settings (Enable iSync for this Palm Device is checked); and everything else is Synchronize.
Any idea what the problem is??
Thanks.
Post relates to: Palm TX
Hello rmiko and welcome to the Palm forums.
In Mac OS X, go to the Utilities folder, and run the utility called "Disk Utility." When you select your hard drive on the left of the window, a button near the bottom middle of the screen will become active called "Prepair Disk Permissions". (I'm using Mac OS X 10.5.x so the verbage might be different in older versions of Mac OS X.)
Click the Repair button and Mac OS X will go through and reset all of the permissions on folders and files back to their defautl settings. When the job is done, reboot the Mac and try to HotSync again.
Alan G
Post relates to: Treo 755p (Sprint)
Similar Messages
-
Error message - Conduit Manager Volume is Locked/File is locked
Just bought a new Tungsten E2 and tried to sync to my new Mac OSS .51. When I try to sync, I repeatedly get a message saying "Conduit Manager, Volume is locked." After clicking "ok" about 5 times, I get a message saying "File is locked."
Also, which connection should be selected from the available connections in preferences?
Post relates to: Tungsten E2I just found the answer on another site since I had the same problem with my Zire 72. It worked fine and then didn't. Here's the solution from that site cut and pasted below. I've included the person's name who had the solution on the bottom so he gets credit.
However, there are times that your userdata really locks up on you due to some minor application duplications. If ever you experience this problem:
1. Search for "user data" file. Get info and then checked if the data is locked. If data is locked, unlock it.
2. Go to Sys Prefs. Go to accounts. Under My Accounts, check startup items. Try to check if you have Palm Desktop Background and Transport Monitor. If you have duplicates of both or triplicates, delete them. Make sure that you only have one for each file and the type is "application".
3. Search for "com.palm.HS" files. delete those files. restart your mac and you're up and running.
Ian Douglas
Post relates to: Zire 72 -
Hello All,
Palm TX with HotSync v. 5.4.8P connected to new Intel iMAC via USB 2 cable. Palm desktop v.4.2.1 installed successfully and the TX synched successfully when I first installed the software. Then I installed the latest Apple security update 2008-007. The next time (days later) I attempted to do a hot sync and got an OS message stating that "application Conduit Manager failed unexpectedly..." and the sync is aborted. I reinstalled the MAC software and reset the TX, but the problem persists. I then tried to use the Bluetooth sync, and although the connection was good, the same error was returned.
Has anyone else had this problem? What am I missing?
Thanks,
UW
Post relates to: Palm TXI have been having the same problem. It locks up when syncing my tasks. I went into my conduit settings and set up tasks to do nothing and it synced. Hope they fix this soon. Glad someone else is having this problem too. I deleted my palm application and redownloaded it too.
Post relates to: Treo 755p (Verizon) -
Error: "Conduit Manager quit unexpectedly" during Mac Hot Sync
Hello! After many years of successfully hot-syncing my Palm m500 to my various Macs, i'm suddenly getting an error message every single time my Hot Sync tries to sync the Datebook data:
The application Conduit Manager quit unexpectedly.
Mac OS X and other applications are not affected.
Click Relaunch to launch the application again.
i've already tried reattaching the USB cables and the Palm m500 into the cradle, and rebooting my Mac several times, and removing the "com.palm.xxxx.plist" files and the "Palm Desktop Info" file from my users/library/preferences folder. and i've spent several hours cruising these forums but nothing has worked. I've tried hot synching about 10 times in the last 12 hours but i keep getting this same error.
i also tried slowing down my hot sync by pressing the Shift key on my Mac during the entire hot sync, but i still get this error:
Conduit Manager: Unexpected error #-111
i tried to paste my full log report below but i ran into the 20k character limit for this form. since it looks like it's "Thread 4" that is causing the crash, i've deleted other parts of the log report but can send those to you in another posting if that would help.
thanks in advance for any help you can offer! i love my Palm m500 as I much prefer it to Apple's iCal system and would like to fix this problem so I don't need to abandon my Palm!
Report:
Process: Conduit Manager [217]
Path: /Applications/Palm/Conduit Manager/Contents/MacOSClassic/Conduit Manager
Identifier: com.palm.HotSync.ConduitManager
Version: 3.2.1 (3.2.1)
Code Type: PPC (Translated)
Parent Process: launchd [144]
Interval Since Last Report: 657 sec
Crashes Since Last Report: 1
Per-App Interval Since Last Report: 41 sec
Per-App Crashes Since Last Report: 1
Date/Time: 2010-01-03 00:20:36.147 -0800
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 26B9A75C-009B-45C3-B160-FB5932991E00
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000160fc198
Crashed Thread: 4
Thread 0:
0 translate 0xb81529ef spin_lock_wrapper + 90931
1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3 translate 0xb80dfb0b 0xb8000000 + 916235
4 ??? 0x8138b831 0 + 2167978033
Thread 1:
0 ??? 0x800bc286 0 + 2148254342
1 ??? 0x800c3a7c 0 + 2148285052
2 translate 0xb818b6ea CallPPCFunctionAtAddressInt + 202886
3 ??? 0x800ed155 0 + 2148454741
4 ??? 0x800ed012 0 + 2148454418
Thread 2:
0 translate 0xb81529ef spin_lock_wrapper + 90931
1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3 translate 0xb80dfb0b 0xb8000000 + 916235
4 ??? 0x8138b831 0 + 2167978033
Thread 3:
0 translate 0xb81529ef spin_lock_wrapper + 90931
1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3 translate 0xb80dfb0b 0xb8000000 + 916235
4 ??? 0x8138b831 0 + 2167978033
Thread 4 Crashed:
0 ??? 0x7c00867b 0 + 2080409211
Thread 5:
0 translate 0xb8152c24 spin_lock_wrapper + 91496
1 translate 0xb816c825 CallPPCFunctionAtAddressInt + 76225
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spin_lock_wrapper + 4259
6 translate 0xb8011b64 0xb8000000 + 72548
Thread 6:
0 translate 0xb815289e spin_lock_wrapper + 90594
1 translate 0xb816e8a7 CallPPCFunctionAtAddressInt + 84547
2 translate 0xb80dfb0b 0xb8000000 + 916235
3 ??? 0x819d8c92 0 + 2174586002
Thread 4 crashed with X86 Thread State (32-bit):
eax: 0x98c10f16 ebx: 0x00000200 ecx: 0x160fc198 edx: 0xf01804e0
edi: 0xb81d8794 esi: 0xb81d8770 ebp: 0x80817f80 esp: 0xb019eeec
ss: 0x0000001f efl: 0x00010213 eip: 0x7c00867b cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x160fc198
Thread 4: (0xb011c83c, 0xb81529ef)
0x00163b90: No symbol
0x94f46bb0: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _YieldToThread + 532
0x94f4bfa4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _SetThreadState + 172
0x94f4becc: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _SetThreadStateEndCritical + 136
0x15dd37c8: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _SemWait__7LThreadFP10LSemaphorelR4QHdrRUc + 144
0x15ddcb90: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _BlockThread__10LSemaphoreFl + 92
0x15ddca38: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _Wait__10LSemaphoreFl + 104
0x15dd1eb4: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _Run__Q27LThread7CleanupFv + 48
0x15dd3df8: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _DoEntry__7LThreadFPv + 64
0x94f4bdf4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _CooperativeThread + 348
0x913bf1d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x91335120 ctr: 0x9132e1f0
r00: 0xffffffe1 r01: 0xf0101ae0 r02: 0x00000013 r03: 0xf0101b8c
r04: 0x00000003 r05: 0x00000018 r06: 0x00000020 r07: 0x00006187
r08: 0x00000000 r09: 0x00000000 r10: 0x00000000 r11: 0xa020568c
r12: 0x9132e1f0 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000018
r24: 0xf0101b8c r25: 0x00000020 r26: 0x00006187 r27: 0x00000000
r28: 0x00000000 r29: 0x00000003 r30: 0x00000003 r31: 0x94f469a4
Thread 5: Crashed (0xb019eeec, 0x7c00867b)
0x7c367b28: No symbol
0x7c364a58: No symbol
0x7c364b44: No symbol
0x7c35a818: No symbol
0x7c34a3bc: No symbol
0x7c347fe8: No symbol
0x7c34813c: No symbol
0x7c32da54: No symbol
0x7c329168: No symbol
0x7c327e70: No symbol
0x7c32763c: No symbol
0x7c32884c: No symbol
0x7c346c48: No symbol
0x7c346ec0: No symbol
0x8536c290: No symbol
0x8536cf30: No symbol
0x8536cb6c: No symbol
0x8536e004: No symbol
0x85366484: No symbol
0x85372680: No symbol
0x853c949c: No symbol
0x94f4bdf4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _CooperativeThread + 348
0x913bf1d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x7c367a80 ctr: 0x9132f590
r00: 0x00000008 r01: 0xf01804e0 r02: 0x15f2f000 r03: 0x00000003
r04: 0x1610beb8 r05: 0x00000002 r06: 0xf018051c r07: 0x00000000
r08: 0x000eb2a4 r09: 0x00000000 r10: 0x00800000 r11: 0xa0882d04
r12: 0x9132f590 r13: 0x00000000 r14: 0x003f252c r15: 0x00000001
r16: 0x001751f0 r17: 0x003f2558 r18: 0x003f2588 r19: 0x003f2518
r20: 0x003f24e8 r21: 0xf0181426 r22: 0x00144c00 r23: 0x00000003
r24: 0x00000008 r25: 0x15f32dcc r26: 0x15f32d54 r27: 0x0000ffff
r28: 0x000095bf r29: 0x15f3705c r30: 0x15f37060 r31: 0x00893ca8
Post relates to: Palm m500
Post relates to: Palm m500I had the same problem syncing my Palm TX with 10.5.8. After being without my Palm for 3 weeks, I bought Snow leopard, and all was fine again. I found out at an Apple store that 10.5.8 was full of propblems, and this was one of them.
Fast forward: I've been using 10.6 ever since it was released, happily syncing away with my Palm ... until Friday night (2 days ago), when it stopped working, and then I discovered that Palm does not and will not support Mac OS 10.6. So I'm urgently trying to migrate everything on Palm to my iPod Touch, exporting to 10.4 on an old iBook, since it will still sync with it, then moving the data to my iMac's 10.6, and then syncing with my iPod Touch.
I'm working on the problem now, and have my Schedule migrated, but now need to get my ToDo, Address Book and Memos done.
The 10.6 Address Book (v5.0.1) doesn't support the Palm's custom fields like Tiger's Address Book (4.0.6). I can't yet find a way to export the Palm's ToDos in a format that iCal can consume, and Notes on the iPod (for my Memos, possibly) is not supported on 10.6 yet for my iPod Touch.
1 step forward, 3 steps back, so far; but absolutely necessary, now that Palm has withdrawn from the Mac market.
Any ideas on these 3 problem areas, from anyone, would be most welcome. -
Conduit Manager Aborts Syncing Treo 700p to Mac under OS 10.5.5
I am trying to sync the contacts from my Treo 700p to my Mac (OS 10.5.5) using Palm Desktop which I downloaded today.
I can sync media this way but not contacts.
Every time I do this the Conduit Manager aborts as follows - ideas?
Process: Conduit Manager [877]
Path: /Applications/Palm/Conduit Manager/Contents/MacOSClassic/Conduit Manager
Identifier: com.palm.HotSync.ConduitManager
Version: 3.2.1 (3.2.1)
Code Type: PPC (Translated)
Parent Process: launchd [156]
Date/Time: 2008-12-26 16:12:43.336 -0500
OS Version: Mac OS X 10.5.5 (9F33)
Report Version: 6
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000015f90ff0
Crashed Thread: 4
Thread 0:
0 translate 0xb81529ef spin_lock_wrapper + 90931
1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3 translate 0xb80dfb0b 0xb8000000 + 916235
Thread 1:
0 ??? 0x800bc4a6 0 + 2148254886
1 ??? 0x800c3c9c 0 + 2148285596
2 translate 0xb818b6ea CallPPCFunctionAtAddressInt + 202886
3 ??? 0x800ed6f5 0 + 2148456181
4 ??? 0x800ed5b2 0 + 2148455858
Thread 2:
0 translate 0xb81529ef spin_lock_wrapper + 90931
1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3 translate 0xb80bdb8b 0xb8000000 + 777099
4 translate 0xb80b7007 0xb8000000 + 749575
5 translate 0xb80d49c0 0xb8000000 + 870848
6 translate 0xb813ce79 spin_lock_wrapper + 1981
Thread 3:
0 translate 0xb81529ef spin_lock_wrapper + 90931
1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3 translate 0xb80bdb8b 0xb8000000 + 777099
4 translate 0xb80b7007 0xb8000000 + 749575
5 translate 0xb80d49c0 0xb8000000 + 870848
6 translate 0xb813ce79 spin_lock_wrapper + 1981
Thread 4 Crashed:
0 ??? 0xffff0ee6 0 + 4294905574
Thread 5:
0 translate 0xb8152c24 spin_lock_wrapper + 91496
1 translate 0xb816c825 CallPPCFunctionAtAddressInt + 76225
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spin_lock_wrapper + 4259
Thread 6:
0 translate 0xb815289e spin_lock_wrapper + 90594
1 translate 0xb816e8a7 CallPPCFunctionAtAddressInt + 84547
2 translate 0xb80dfb0b 0xb8000000 + 916235
Thread 4 crashed with X86 Thread State (32-bit):
eax: 0xffff0700 ebx: 0x811a8f54 ecx: 0x00000030 edx: 0x154c2600
edi: 0x16019030 esi: 0x00acea30 ebp: 0xf017f678 esp: 0xf017f670
ss: 0x0000001f efl: 0x00010206 eip: 0xffff0ee6 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x15f90ff0
Binary Images:
0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
Translated Code Information:
Rosetta Version: 21.03
Args: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp /Applications/Palm/Conduit Manager/Contents/MacOSClassic/Conduit Manager
Exception: EXC_BAD_ACCESS (0x0001)
Thread 0: (0xb0220d38, 0xb8152c24)
0x92e368c0: /usr/lib/libSystem.B.dylib : __pthread_cond_wait + 1260
0x96a559ec: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _TSWaitOnCondition + 136
0x96a33e48: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _TSWaitOnConditionTimedRelative + 208
0x96a555a8: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _MPWaitOnQueue + 276
0x8523eb70: No symbol
0x96a537dc: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _PrivateMPEntryPoint + 80
0x96a537dc: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _PrivateMPEntryPoint + 80
0x92e84e8c: /usr/lib/libSystem.B.dylib : __pthread_body + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x92e36a04 ctr: 0x92dfe73c
r00: 0x0000014e r01: 0xf0203bb0 r02: 0xf0203bf0 r03: 0x00004003
r04: 0x00004103 r05: 0x00000000 r06: 0x00000000 r07: 0x00000000
r08: 0x00000000 r09: 0x00000001 r10: 0x92e363a0 r11: 0xa05a3898
r12: 0x92dfe73c r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0xa05a63e8
r28: 0xa0d5d8cc r29: 0x00880400 r30: 0x0012e3e8 r31: 0x92e363e8
Thread 1: (0xb02a2e20, 0xb815289e)
0x92e368c0: /usr/lib/libSystem.B.dylib : __pthread_cond_wait + 1260
0x96a33e6c: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _TSWaitOnConditionTimedRelative + 244
0x96a33c40: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _TSWaitOnSemaphoreCommon + 432
0x96aca010: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _TimingThread + 64
0x92e84e8c: /usr/lib/libSystem.B.dylib : __pthread_body + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x92e36900 ctr: 0x92df34b0
r00: 0xffffffd9 r01: 0xf0284c90 r02: 0xa059e924 r03: 0x00003e03
r04: 0x00003f03 r05: 0x00000006 r06: 0x3b999665 r07: 0x00000000
r08: 0x00000006 r09: 0x00000001 r10: 0x65a0bc00 r11: 0xa05a39dc
r12: 0x92df34b0 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0xf0284e48 r18: 0xa0d59fd8 r19: 0xa0d59fd8
r20: 0xf0284e60 r21: 0x96b13a98 r22: 0x96b13a98 r23: 0x00000000
r24: 0x00000000 r25: 0x00000001 r26: 0xf0284e48 r27: 0xa05a63e8
r28: 0xa0d5d99c r29: 0xa059e924 r30: 0xa0d5d9d0 r31: 0x92e363e8
Thread 2: (0xb009a77c, 0xb81529ef)
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
0x96a82f28: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _YieldToThread + 532
0x96a88304: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _SetThreadState + 172
0x96a8822c: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _SetThreadStateEndCritical + 136
0x853c8f64: No symbol
0x853c7558: No symbol
0x853c73dc: No symbol
0x853c799c: No symbol
0x853c949c: No symbol
0x96a88154: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _CooperativeThread + 348
0x92e84e8c: /usr/lib/libSystem.B.dylib : __pthread_body + 40
Post relates to: Treo 700p (Verizon)
Post relates to: Treo 700p (Verizon)
Post relates to: Treo 700p (Verizon)Check that the user name on each device matches to the user profile in the palm desktop software.
Have you sync'd with any error messages at all when syncing any of the two devices?
Post relates to: Tungsten E2 -
Error: The Application Conduit Manager quit unexpectedly
When trying to perform a HotSync using my Treo 700p, I'm suddenly getting this error: "The Application Conduit Manager quit unexpectedly." I have recently been sent a new Treo to replace a defective Treo, but until I received this new Treo, I have been syncing without problems for over 18 months.
Let me know if anyone has had similar problems and any solutions that you have successfully used.
Thanks!If you are saying that you synchronize a single Palm device BOTH at work and at home, you've likely explained why your data has become corrupted. A Palm device was not intended to be, and should never be used as, a 'data carrier' or storage device to move records from one Macintosh to another. To do so will almost always result in serious data corruption over time, the duplication of records and so on.
It can be less problematic to synchronize with a Windows platform on one end and a Macintosh on another, but I don't recommend that, as—once again—it places your records at risk.
Keep in mind that the problematic record or records are on your device, not in iCal, as demonstrated by the Conduit Manager warning. There may also be records corrupted in iCal on your Power Macintosh G5, but that's another issue.
You can correct the G5 issue, but first, it is important for you to outline just what you are presently—and have historically—been doing to 'synchronize' your home and work machines. -
"The Application Conduit Manager quit unexpectedly."
I reinstalled Tiger because the syncserver got stuck when I tried to sync my Palm Z22.
Now when syncing I get: "The Application Conduit Manager quit unexpectedly." In isync I get "the hotsync software is not properly installed or it has never been opened. Try opening HotSync Manager, then return to iSync and choose Devices>Enable Palm again." even after installing and opening HotSyncManager.
Can anyone help?You have a very common problem, most likely caused by your choice to archive and install. Perform one of the following procedures:
Take a look at the permissions of the folders listed below by selecting each folder, one at a time, and—either using the I key sequence or the Get Info option in the File menu of the Finder—opening the information box for the folder. Your permissions for the folders listed below should appear as described below the pathname to that folder:
For the Macintosh HD:Applications:Palm folder:
Ownership & Permissions
You can: Read & Write
Details
Owner: <shortusername>
Access: Read & Write
Group: admin
Access: Read & Write
Others: Read only
For the Macintosh HD:Library:Application Support:Palm Desktop folder:
Ownership & Permissions
You can: Read & Write
Details
Owner: <shortusername>
Access: Read & Write
Group: admin
Access: Read & Write
Others: Read only
For the Macintosh HD:Library:Application Support:Palm HotSync folder:
Ownership & Permissions
You can: Read & Write
Details
Owner: <shortusername>
Access: Read & Write
Group: admin
Access: Read & Write
Others: Read only
You can either reset those values manually, then restart and recheck them to be sure that they are set correctly or use the Terminal application by typing these strings listed below this example—substituting your short user name—as shown below:
sample: "sudo chown -R <shortusername>:admin /Applications/Palm"
actual: "sudo chown -R michaellafferty:admin /Applications/Palm"
…where michaellafferty is the <shortusername> in my case. Be sure to pay attention to the spaces in each string, and the direction of the / or \ forward and back slash characters.
Here are the appropriate Terminal entries. Each is is shown bulleted below, but actually begins with the term sudo:
• sudo chown -R <shortusername>:admin /Applications/Palm
NOTE: at this point, you'll be asked to enter your login password
• sudo chmod -R 775 /Applications/Palm
• sudo chown -R <shortusername>:admin /Library/Application\ Support/Palm\ HotSync/
• sudo chmod -R 775 /Library/Application\ Support/Palm\ HotSync/
• sudo chown -R <shortusername>:admin /Library/Application\ Support/Palm\ Desktop/
• sudo chmod -R 775 /Library/Application\ Support/Palm\ Desktop/
Again, pay particular attention to the spaces and to the \ characters, as both are critical to the syntax of these commands. Remember to place your actual shortusername in the string where the <shortusername> placeholder is shown, as in the sample above. Do not include the < and > characters around your actual shortusername.
As a Palm user, don't elect to archive and install Mac OS X unless there is no other method to do so which insures that your applications and data are preserved. -
Conduit Manager Quit unexpectedly
So my Zire 72s has always synced fine with my iMac G5. Until now.
Now, part way through hotsyncing the Conduit Manager disappears and I get an error message that says:
Conduit Manager Quit Unexpectedly. I can then close, report, or try again.
On my palm I eventually get this error message:
Hotsync Problem:
The connection between your handehld computer and the desktop was lost. Some of your data was NOT backed up. Please check your setup and try again.
So it appears the problem is on the computer end.
I imagine that I simply need to reset my conduit manager or something, but alas, I don't know how.
Can anyone help? This is important and somewhat urgent as I need to sync my appointments.
Thanks,So, I use Epocrates RX, a drug reference program, I noticed that the HotSync would quit every time it got to syncronizing Epocrates. So, I tried opening the program on my palm. I would get a "fatal error" message and would then have to restart to palm.
I've since removed the program from the palm and now everything syncs okay.
Hmmm -
Suddenly I get the message from "transport manager" that the "conduit manager cannot be found' when I try to sync my new palm tungsten E2. The message says to place it in the same folder as Hotsync manager- it is already. Any ideas- it means I have to manually open conduit manager prior to a hotsync. Kind of a pain
Suddenly I get the message from "transport manager" that the "conduit manager cannot be found' when I try to sync my new palm tungsten E2. The message says to place it in the same folder as Hotsync manager- it is already. Any ideas- it means I have to manually open conduit manager prior to a hotsync. Kind of a pain
-
Hi All,
I have tried several things to solve my problem and have been unsuccessful. I have been trying to install a program into my Tungsten E and it will sync my usual data but when it comes to installing the new program I get the message "Conduit manager quit unexpecantly". It gets me the optio to quit or to retry, when I retry nothing happens. I contacted the programs help desk and they told me to download it again and O did with the same results. I downloaded an updated version of the palm software also.
It has been frustrating. Can you help?
I am a real novice so please speak slowly!
Thanks in advance
Post relates to: Palm VIIxOkay so I got everything to sync... a few times. Turns out I just needed to turn off the other conduits or to have them do nothing. But now it won't do anything when I press the sync button on the connection device, or if I do it through my Palm. What could make it do this? Do I need to reset the Palm and/or computer?
Confused. -
I just upgraded to Mac 10.5.5 and am trying to sync a T/X. It starts to sync and then the Conduit Manager crashes. Is there a fix for this?
Post relates to: Palm TXI am experiencing the same problem (10.5.5 & Palm 4.2.1). HotSync quits while attempting to synchronise memopad.
HotSync Manager also quits when trying to open Conduit Settings from within Palm Desktop.
Problems were not solved by removing all related plist files...
These is the log-report in Palm:
Loading “Note Pad Conduit”
Conduit “Note Pad” version 3.0.0
Sync type is Slow
Remote database 1 name is npadDB
OK Note Pad
Loading “Memo Conduit”
Conduit “Memo Pad” version 3.0.0
Sync type is Slow
Remote database 1 name is MemoDB
Memo Pad did nothing
Loading “FileMaker 7 Conduit”
I have also sent the crash-log to Apple via the automatic reporting possibility.
Hein
Post relates to: Tungsten E2 -
Conduit manager quits when hot syncing
Should be a simple fix. When I hot sync the operation fails, message "conduit manager unexpect. quit"
I've installed recent ical 1.5.xxx
Installed conduit manager
installed palm desktop
installed desktop permission repair
I've searched the forum and couldn't find what i need. thanks for your help.
Stevereloaded conduit and now it works
-
Conduit Manager unexpectedly quits
I have an E2 and a MacBook. Recently, I was attempted in sync ePocrates, which I've never had trouble with. As I was syncing, I received a message stated "Conduit Manager quit unexpectedly." It was consistently during the part of the sync in which ePocrates was updating. I uninstalled both program and did a hard reset on my Palm. After doing all of this I received the same error message. Any suggestions on how to trouble shoot this?
Post relates to: Tungsten E2Hi, I have exactly the same problem of conduit manager quitting during autosync while updating ePocrates. I went through the same solution suggested by our epocrates staff person, and also could NOT find "Epocrates Conduit SAVED" in order to delete it . I also deleted "ePocratesPrep" and " ePocrates_AutoUPdate", got rid of installers, and downloaded ePocrates again. The autosync worked until during the epocrates portion, when the autosync failed and quit. Now epocrates won't run at all. Great. I'm running Mac OS 10.5.3 and am using Firefox. Here are the sync logs if they are of any use -- I will send this to ePocrates also.
HotSync 3.2.1 started 7/6/08 11:17:28 PM
Local Synchronization
OK Install
OK Epocrates Install 7/6/08 11:18:57 PM
OK Epocrates Install
OK Voice Memo
To Do List did nothing
OK Tasks
OK Media
OK Note Pad
OK Memos
Memo Pad did nothing
7/6/08 11:20:34 PM
Sync Fatal Error 10006410:
Lost Connection. 7/6/08 11:20:34 PM
7/6/08 11:20:34 PM
7/6/08 11:20:34 PM
Sync Fatal Error 10006410:
Lost Connection. 7/6/08 11:20:34 PM
7/6/08 11:20:34 PM
OK Epocrates AutoUpdate with 6 message(s)
OK Epocrates AutoUpdate with 6 message(s)
HotSync Canceled 7/6/08 11:20:35 PM
Just as an aside, this coincides with persistent poor calibration of my E2 Tungsten touch screen that will not respond to recalibration by targets, in spite of all the usual resets (haven't done a hard one yet, was waiting to autosync), checking the physical screen, etc.
Thanks --
Post relates to: Tungsten E2 -
Conduit Manager quits unexpectedly
Hello,
I am trying to sync my Palm OS and iSync. I have followed the instructions from iSync (adding the iSync conduit to the conduit manager, enabling iSync for this device in the conduit manager, etc.). When I press the button to sync on the connection device, it begins to sync and then the "application Conduit Manager quits unexpectedly."
Obviously I am brand new to syncing Palm OS and stuff on my Mac. Any help would be greatly appreciated on getting started! Thanks.
MattOkay so I got everything to sync... a few times. Turns out I just needed to turn off the other conduits or to have them do nothing. But now it won't do anything when I press the sync button on the connection device, or if I do it through my Palm. What could make it do this? Do I need to reset the Palm and/or computer?
Confused. -
Conduit Manager - Volume is locked.
I am working on a Palm 755p for a friend and we keep getting the above message. Can anyone suggest a resolution to this problem?
Post relates to: Treo 755p (Verizon)Is this for contacts and calendar? If so check wireless sync and enable other sync apps. Here is the directions
http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=45389
Post relates to: Treo 800w (Sprint)
Maybe you are looking for
-
I forgot how to use FormsCentral
I started using FormsCentral in April last year and was working on one specific form. I have many different versions of the one form and I saved all of them to my desk top. Now when I open the form, I can no longer edit it. For the life of me, I c
-
The sound on my Macbook doesn't work.
The sound of my MacBook Pro 15" Retina just works at the startup screen. I can control the volume on startup screen but when I login I can't hear any sound from my MacBook even I plug headphones or speakers in.
-
Macbook having multiple kernel panic after upgrade to Maverick OS
I have been having problems with my mid-2010 MacBook since upgrading to Mavericks. It will have several kernel panic episodes a day. Originally I took it to the Apple Genius Bar and they recommended a complete reinstall of Mavericks. This did not st
-
Living with a small SSD Boot Drive on New Pro??? Migration?
Hi Folks, I am seriously considering moving to a new mac pro from my 2008 tower. Aside from peripheral issues, my main concern is how to use the smaller SSD boot drive vs. my now current 2T drive? I've been a mac user since 1985 and my user f
-
Guys I need your help I can't use my camera when I reverse it in front of me but when I reverse it again it would work what should I do can you really pls help me I only use my camera twice and now I can't use it anymore. Pls answer............