Conectar dos mac para compartir archivos via firewire

Buenas noches,
Tengo un mac y un mac mini, quiero crear una red firewire para compartir archivos de forma mas rapida y no se como puedo hacerlo.
Alguien ha conectado alguna?
Goodnight
I have a mac and a mac mini, I want to create a firewire network to share files faster and not as I can.
Has anyone ever connected?

Gracias BDAqua por tu respuesta.
Tenia conectado los dos mac via ethernet, pero quise utilizar cable firewire para transferir archivos mas pesados y no fueran tan lentos, y pense en firewire.
De momento no he conseguido conectarlo, ni que funciona.
BDAqua Thanks for your response.
I had connected the two via ethernet mac, but I wanted to use firewire cable to transfer larger files and were not so slow, and I thought firewire.
So far I have not managed to connect, and it works

Similar Messages

  • Old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

    old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

    Photos are stored in your home folder (~pictures).
    Barry

  • Moving files from old Mac to new one, via Firewire

    I have an old G4, and recently bought a new iMac. I'm trying to transfer the files from my old computer to the new one via firewire (and I've also tried via ethernet cable). The G4 has two hard drives, one with system files, the other just used for data. When I connect the Macs by Firewire, with the G4 in Target mode, the iMac only recognizes the data hard drive. Is there a reason that anybody can think of why the system drive wouldn't show up?

    FireWire Target Disk mode only connects to the master ATA drive on the ATA 0 bus; if there's nothing at that location, the computer will shut down instead.
    (33779)

  • Dead screen, transfering documents via firewire - need help

    Greetings,
    So I've got a 1 Ghz iMac (floating pivot screen.) - my primary mission critical workstation. My screen died today. Grrrr.
    No time to muck about, I went out and purchased a mac mini (1.5 Ghz single intel core), I want to transfer all data from the old box to the new asap.
    The migration assistant that appears at first boot up is cool, and I was able to move all applications. (handy!)
    Problem is that I couldn't move all my user documents because the old Mac's drive is 80 gig and the new is only 60. So I figured I would just drag and drop as much as I can manually.
    I've gone and reattached the old mac to the new via firewire and booted up the old box as an external drive. Problem is, when I open up the user folder on the old hard drive I'm not seeing any files.... ie. all folders including the old desktop folder are empty....its like the files are hidden or something.
    Help please.

    could it be because under ownership and permissions I have no access to these folders? Is that why the folders "appear" empty? - then my next question would be, how can I give myself access to them?
    Remembering that I am unable to boot up and use the old iMac (except in external drive mode) since the screen (or video card???) is dead.
    Also - I'm attempting spotlight searches from the new mac on the old mac's HD for known files on the old mac's desktop and its coming back with nothing...
    What a mess ....maybe

  • Internet sharing via firewire cable

    Hello,
    I'd like to know, if there is any simple way to share internet connection from Mac running Tiger Server via firewire cable to windows xp pc? I thought it should be done by starting the Internet service in Sharing preferences, but in Server I'm completely lost.
    In Sharing tab of System preferences I see only Remote Desktop, Remote Login and Remote Events services and when I start Server Admin utility, I don't know, which service to set and how and if I even started the right application.
    Thank you very much for your answers

    Hello.
    Whilst I can invisage a way of doing this you must remember that Server is the gateway, therefore it must be controlling the access out of the building... Therefore, I assume that you have the server connecting to the outside world correctly.
    In the setup of the server, you have the option of using firewire as the connector - this is effectively a network port and must be configured as such... if your server runs DHCP (not neccessary, but easier), local DNS and info for the router. Where I can see it falling over is the transfer from from one network port to another - ie traffic coming in from Firewire (say via the newly setup DHCP on the server, this will also force a netwotk IP in the same range that the server will accept), to the ethernet port to get out... it would be easy to use two different subnet ranges; (perhaps this is why you want to do it this way?).
    I would have thought that a little ethernet hub to get the machines on the same 'network' - and ethernet at that, and the server being configured to control DHCP/local DNS/router info, and the PC to run DHCP would be the fastest way to get a result. It's certainly the 'accepted' way of working.
    HTH

  • How do I Install Mac OS 10.4 "Tiger" via Firewire onto my computer

    Ok so...I have a Titanium 15" Powerbook Laptop who's faulty CD Drive is being replaced with a Super Drive, as soo as I get the part in the mail.
    In the meantime, I have connected my Powerbook to my roommate's G5 Desktop, successfully wiped my Powerbook hard drive clean (via firewire), in preparation to install Mac OS X 10.4.7 onto my Powerbook's hard drive (again via Firewire) and a startup instillation disk. This is where I get stuck. How is this done? Can anyone help?

    To install via firewire start up the G5 from the install disk, then when at the installation screen boot the powerbook in target disk mode. Choose the powerbook from the list of disks to install 10.4 onto. Then just install the system. I am not sure if it will work from a G5, but it is worth a try.

  • I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

    I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

    Hello twrate,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iMovie '11: If iMovie doesn’t recognize your camcorder
    http://support.apple.com/kb/PH2146
    Best of luck,
    Mario

  • I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

    I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

    tyler57,
    it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port.

  • Connectiong an external thunderbolt hard drive to an older iMac via firewire to thunderbolt adapter, as my Mac doesn't have any thunderbolt entry?

    Is there a possibility to connect an external thunderbolt hard drive to my iMac (originally Leopard 10.5.8. upgraded to Snow Leopard 10.6.3) via firewire to thunderbolt adapter, as my Mac doesn't have any thunderbolt, but has two firewire entries?
    Would like to use the hard drive's big data stocking capacity of 8TB, but actual WD-HDDs of such a capacity have no more other entries than thunderbolt.

    Basically, no.  The Thunderbolt-Firewire adapter does not work "in reverse,"  meaning, you have to have a Thunderbolt port on your Mac in order to use it.
    Most Thunderbolt drives that I have seen also have a USB 3 port.  You could use that, but on on an older Mac that does not have a USB 3 port you will be limited to USB 2 speeds.

  • What is the best way to record a project to an external recorded via firewire. Also, who makes a recorder that works with a mac?

    What is the best way to record a project from the timeline to an external recorder via firewire? Also, who makes a recorder that works with a mac and recordes in realtime? This is possible right?

    While theoretically possible, sometimes the camera people disable recording back to tape from the computer due to DRM (digital rights managment) issues. They will allow tape to tape transfers however.
    Test your process first is all I can advise.
    x

  • Migration Assistant not recognizing other Mac via FireWire

    I am trying to transfer files from my G4 Mirror Doors Power Mac to my new Intel iMac via the instructions that come up on the new iMac. I am running the latest version of 10.4 on the G4.
    I have the two machines connected via FireWire. I restarted the G4 holding the "T" key down and sure enough, the floating "FireWire" icon comes up but shortly after that, the new iMac says, "There are no versions of OS X on the older machine" which is obviously not true.
    I tried the Ethernet route and loaded the Install Disk from the iMac into the G4 as instructed but that disk did not recognize either of my 2 internal drives as valid for installation.
    Any suggestions?

    FWIW, I have had no problems using Migration Assistant or understanding its prompts, at least when using the version included in the recent Migration and DVD and CD Sharing Update. In this version or later, every option has both a title & descriptive info below it & there are no places I can see in which everything is called a document. You may want to check your MA version number & make sure it is version 1.2.3 or later, as described in About the Migration and DVD/CD Sharing Update. This may help avoid any confusion you have had.
    However, keep in mind that MA is designed to migrate files from one backup or startup disk at a time. It will transfer items from one home folder on a connected drive to the corresponding one on the new drive but these items must be enclosed in a home folder (in /Users/) on that drive. If you have elected to store these items on a non-startup drive lacking that hierarchy, you must import them using some other method & decide where to put them on the new drive. MA cannot make that decision for you.
    Moreover, if you tell MA to import only your "Documents" folder, it will not import such items as your Movies, Music, Pictures, or other home folders, so for example your ~/Pictures/iPhoto Library file will not be imported, nor will be your ~/Music/iTunes folder (which contains your iTunes database files, even if the iTunes Music folder containing all your music files is stored elsewhere).
    Without knowing exactly how you have 'piecemealed' other files & folders into your new drive, I do not know what to tell you to do to best complete the migration process. If you can supply more info about that, & about where exactly the original files & folders are stored on the older Mac, perhaps I or someone else can give you more useful info about doing that.

  • TV via Firewire & Camcorders & VideoGame Consoles on the Mac

    I worked out that by connecting my MiniDV camcorder (Canon MV600i) to my set top box which is also connected to my mac via Firewire, I can get a television signal through firewire to view TV on my large external LCD screen. I'm currently using a program called Vidi to view the television stream. This works well, but I've got some questions that need asking:
    1. My TV stream is being constantly displayed in the eyepiece in my MiniDV camcorder. I can't find a way to turn this off. Should I worry about the fact that this will always be on as long as i'm watching tv? Will it wear out?
    2. Vidi is great for recording my TV shows in the DV codec. I can view the TV stream full framerate whilst I'm recording, which is brilliant. I would quite like to go a step further though, and be able to pause and rewind live television. Are there any programs that can manages what Vidi manages to do with the ability to pause live TV?
    3. Vidi can't display my TV stream on my 2nd display in full screen whilst i'm doing other work. It will only display my tv stream in a window. Is there another program that can manage this?
    4. I would love to be able to play console games on my mac monitor. Using my current connection method, games are unplayable because there is a delay (a fraction of a second). Is there any programs out there that can get rid of this delay?
    -Cheers

    1. My TV stream is being constantly displayed in the
    eyepiece in my MiniDV camcorder. I can't find a way
    to turn this off. Should I worry about the fact that
    this will always be on as long as i'm watching tv?
    Will it wear out?
    The backlight is the only thing that will wear out. If there is a brightness control, set it at minimum for longest life.
    2. Vidi is great for recording my TV shows in the DV
    codec. I can view the TV stream full framerate whilst
    I'm recording, which is brilliant. I would quite like
    to go a step further though, and be able to pause and
    rewind live television. Are there any programs that
    can manages what Vidi manages to do with the ability
    to pause live TV?
    Formac software would do this but I think it will only work with their video to DV converter. Elgato will also do this, but it won't handle DV streams. You could try starting the recording with Vidi, then use another application to play the DV file as it is being recorded. You could then pause and backup. Some applications may not work with an incomplete file, but there are LOTS of player applications out there to try.
    3. Vidi can't display my TV stream on my 2nd display
    in full screen whilst i'm doing other work. It will
    only display my tv stream in a window. Is there
    another program that can manage this?
    Have you checked all the menu options. I can't run my copy of Vidi to check, because I no longer use a DV device.
    4. I would love to be able to play console games on
    my mac monitor. Using my current connection method,
    games are unplayable because there is a delay (a
    fraction of a second). Is there any programs out
    there that can get rid of this delay?
    The delay is in the video to DV converter. You can't fix it with software. Elgato has a couple of devices (the 250, or the Hybrid) that have an uncompressed, low latency mode for game playing.

  • Mac Mini Can't Find my Printer Hooked Up Via Firewire?

    My Canon i9900 printer has both USB 2.0 and FW400 ports. When I hooked it up to my Mac Mini via USB, it recognizes it fine. But when I tried to hook it up via a FW400 to FW800 adapter cable, it doesn't show up in the list of printers in System Pref's "Print & Fax." Not even when I do a search for "more printers." But when I check the Firewire port in the Mini's System Profiler, there it is listed as being connected, a Canon printer.
    Thinking it may be a problem with my adaptor cable, I hooked it to an external FW400 HDD and turned it on. No problem, the HDD was immediately recognized and showed up on my desktop as an external firewire drive.
    How can I get the Mini to recognize my printer hooked up to my FW800 port? I sure would like to free up one of my USB ports, as well as get better printer performance via firewire. Thanks.

    Recognizing the printer over Firewire would require the proper class driver, which I'm guessing doesn't exist.
    I seriously doubt there would be a speed increase using a FW interface. Printing is not that data intensive and the speed bottle neck would not be USB. USB hubs are not expensive if you need more ports.

  • Tengo un problema con Keynote, no abre los archivos .key normalmente, tengo que reiniciar mi mac para poderlos abrir.

    tengo un problema con Keynote, no abre los archivos .key normalmente, tengo que reiniciar mi mac para poderlos abrir.

    Intente reiniciar Keynote de la siguiente manera:
    1 eliminar Keynote versión 6.5, debe utilizar una herramienta de eliminación de la aplicación de este procedimiento a la obra: AppCleaner es libre, yo uso AppZapper
    2 vaciar la papelera
    3 Apagar el (menú Apple> Apagar) Mac
    4 espere 10 segundos, a continuación, pulse el botón de encendido
    5 Inmediatamente después de oír el tono de inicio, mantenga pulsada la tecla Mayús, suelte la tecla Shift cuando vea la pantalla gris de Apple
    6 puesta en marcha se llevará unos minutos más de lo habitual como el Mac está realizando una rutina de reparación
    7 reiniciar el Mac normalmente, (no presione ninguna tecla durante el arranque)
    8 instalar Keynote desde el Mac App Store

  • Como compartir archivos de imac a mac book air?

    como compartir archivos de imac a mac book air?

    como compartir archivos de imac a mac book air?

Maybe you are looking for