Conecté mi iPod touch a un amplificador de 22volts 220 watts y dejo de funcionar

conecté mi iPod touch a un amplificador de 22volts 220 watts y dejo de funcionar ¿TIENE ARREGLO?

Google translate:
I felt a burning smell only a part of the ipod, the next day it worked but the battery did not load or show and today to be connected to load.
Seems like you fried the charging circuit and maybe the battery.

Similar Messages

  • Windows doesn't recognize ipod touch 4g even when in recovery mode, what can i do. itunes doesn't detect it either.

    when i try to conect my ipod touch 4g to my laptop, it doesn't recgonize it itunes doesn't either. at first i would get a pop up from my laptop saying something about the driver buit now nothing happens, but when i try to connet an ipad or ipod nano 3g everything works fine, i have the latest version of itunes and i have firmware 4.3.5 on my ipod. please help.

    What happens when you connect to computer and restore via iTunes?
    Without knowing that:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • No puedo instalar el sofware para mi ipod touch 5, no puedo instalar el sofware para mi ipod touch 5

    como instalo el sofware para mi ipod touch 5g ios 7.0.2

    Usted puede:
    Actualice su iPod touch, vaya a Preferencias-> General-> softwareupdate
    O
    Conecte su iPod touch en iTunes. Basta conectarlo a su computadora, vaya a iTunes, haga clic en el iPod, haga clic en actualizar (si es lo que desea la actualización iOS 7.0.2) o restaurar (si desea borrar por completo y empezar de nuevo con el nuevo software.)
    ¡Mucha suerte!

  • My iPod touch does not connect to my iMac, it just displays the iTunes logo and a USB connector on the screen?

    When I conect my iPod touch to my iMac. The screen on the iPod touch displays the iTunes logo and a picture of a USB connector. The iPod touch seems to be frozen in this state. can anybody help with this problem?

    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • My Ipod Touch conects to my wi-fi, but when I open safari, or any other app that needs internet, it doesnt work. what should I do and why is this happening?

    My sister bought me an ipod touch less than a month ago. when he first came, he was conecting normal to my wifi, but today, he isnt. I use the same wifi at my laptop, and its perfectly working. My ipod identify the network, conects to it, but when I open an app that needs it, it doesnt work. What should I do?
    And why is this happening?

    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • HT201412 I no longer have the computer my ipod touch was sinked too, my ipod has now crashed, when conected to my latest pc it states this computer is not the supervisor pc for this device, can anyone help

    I no longer have the computer my ipod touch was sinked too, my ipod has now crashed, when conected to my latest pc it states this computer is not the supervisor pc for this device, can anyone help

    iOS: Unable to update or restore
    Read the article  Put it in recovery mode

  • My ipod touch wont conect with my computer ..i dont know y ..becas it has be for i cant evan find it in m y computer no where

    my ipod touch wont conect with my computer ..i dont know y ..becas it has be for i cant evan find it in m y computer no where ..but it will charge from my usb when pluged n to my cumputer.. wat to do?i dont have a clue

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • HOW  wireless works? I can`t get conected to ANYWHERE WITH THE IPOD TOUCH

    I do not know how get into itunes with the ipod touch, or you tube or anywhere. Safari only displays can`t get conected to the server. I have a wireless at home Belkin 54b and i connect 1 PSP,2 Wii, 2 laptops, 1Xbox 360, 2 Nintendo DS and they all work.

    I have put in all the wireless information and I have the wirelss signal, but all I get when I try to click on safari or itunes is a error message. The message is can not connect to server. I have 2 laptops and a wireless printer connected and they all work fine. What could be the problem.

  • HT4623 i have a ipod touch 4th gen and i have the wifi bars but when i try to search something it wont let me conect it says "Lightspeed systems - Wed acces" what could i do help please.! o.o

    i have a ipod touch 4th gen and i have the wifi bars but when i try to search something it wont let me conect it says "Lightspeed systems - Wed acces" what could i do help please.! o.o

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Problems on conection Bluetooth Nokia E5 X iPod touch 4 grd

    Problems with conection bluetoth Nokia E5 X iPod Touch 4 generation

    The Bluetooth on the iPod Touch is not designed for connection to phones. It is to enable the use of Bluetooth enabled headphones and some peer-to-peeer gaming.

  • My Ipod Touch Is brand new and i just made my apple account. When i try to connect to the app store It comes up "cannot conect to itunes"  I do have itunes on my ipod what can i doo???? please help

    My ipod touch is brand new and i just  made my apple account and when i try to connect to  the app store or  imessage it cant connect please help

    Try here:
    Can't connect to the iTunes Store
    Try changing he DNS to Google's 8.8.8.8

  • I just recently purcased my new ipod touch 5 but, have forgotten my password. It has not yet been connected to a computer but has been conected to icloud. How can I reset my password?

    Hi, I just recently purchased an ipod touch 5 and have already forgotten my password. I have not yet connected it to my computer so when I tried today it didn't show up as a device. When I tried to go into icloud on my other device, thinking that may help, it would not let me change the email because it was my school ipad. What should I do?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My Ipod touch screen will not come  up unless I conect it to the computer. It never gets past the apple logo and never fully retores? My screen is crackd a little at the bottom. Is this a screen or software problem?

    My ipod touch 4will not respond unless  I hook it up to the computer. It never goes pasthe logo apple screen.It never restores fully. Cant tell if this is a screen or software problem.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Apple will exchange your iPod for a refurbished one for $199 if a 64 GB one and $99 for the other 4G iPods. They do not fix yours.
      Apple - iPod Repair price

  • Hey everyone! i have a external hardrive i keep my itunes library of songs on and it wont sync with my ipod touch inless i copy and paste it into my ipod device when thats conected. i dont want all the songs on there only checked ones. help plz!!

    im having trouble with syncing my ipod touch with my itunes library that i keep on a external hardrive. when i plug up my external hardrive that has all my songs on it, it doesn't sync to my ipod correctly. i have to copy and paste the songs to my ipod device when its connected. i dont want all the songs on there and i want to be able to manually control whats on my ipod. and id like to take some songs off of the ipod also but i want them still in my itunes library though. i usually check the songs i want on the ipod but it isnt working that way maybe because its a external hardrive?? i never had a problem with past ipods with my library on itunes but i ran out of space on my computer and had to transfer all of the songs to my external hardrive. please someone help me!! i thought it would be simple! but it isnt the case! i plug up my hardrive then my ipod, i press sync and nothing gets transfered unless i copy and paste them to the ipod. even though it says ipod syncing in progress! this is really confusing! please help me!! sorry if this is jumbled up and confusing..

    Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
    As IO said before:
    You can redownload most iTunes pruchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    I do not think it included audio books.

  • My ipod touch last generation dont conect with itunes

    My ipod toucht, last generation, dont conect with itunes in windows 7...
    what can i do?????????????
    i try everything, bt still dont work.

    como que sea compatible con itunes???
    lo que pasa es que funcionaba bien y de un dia para otro dejo de funcionar y no aparecio mas en itunes.
    Instale denuevo el programa, hice todo lop que aparece en la pagina pero nada.
    Gracias!

Maybe you are looking for

  • How Can I make A Dialog/Frame Transparent

    Hi I want to make a dialog or frame Transparent. Is it possible in java. Actually i want to add an gif image on the Frame container that image is in curve shape with transparency, and I want this transparency also on the Frame in the java application

  • Error While Running KE5T

    Short text     Error in module RSQL of the database interface. What happened?     Error in the ABAP Application Program     The current ABAP program "GP$GLX$GLPCT" had to be terminated because it has     come across a statement that unfortunately can

  • Short dump while DB Connect extraction(PERFORM_CONFLICT_TAB_TYPE)

    HI ALL, Here i am facing a problem while loading master data for one info object by using DB Connect source system, it is going to short dump with runtime error PERFORM_CONFLICT_TAB_TYPE and the exception is CX_SY_DYN_CALL_ILLEGAL_TYPE  but for other

  • Changing the name and path of Targets, Exec, Products, etc

    I want to change the name and path of the Products, Targets, and Executables, but the text box in the 'info' window won't let me edit, and the choose buttom is grayed out. Any ideas?

  • Will building the site using my own computer effect my client's usage?

    I am wondering if I build my client's website in Contribute CS3 on my own computer, will my client have problems connecting and maintaining her website once I have finished? My client is going to purchase Contribute CS4. Thanks in advance.