Conecting Apple Tv and Home

I have an Apple Tv and would like to conecting whith may home teather. Is possibility and how?
tanks

Is some broadband use to be expected. I would not have thought so but perhaps I am wrong. Any help, insight or information would be greatly appreciated.
Thanks in advance

Similar Messages

Ipad2 upgrade io6 and blink apple sign and home screen issue.

my ipad2 started acting strange after i upgraded to io6. It now display alternating the apple start screen and home screen (blinking).

See if this helps at all. If not, you may have to restore your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Stuck on apple logo and Home button doesn't work, help please?

Well, I dropped my iPod Touch 4g by accident and since that day, the home button hasn't really been working that well. Its very hard to use since you have to press it in really hard to get it to work and sometimes it doesn't even work at all. Anways, I was skyping with my girl and I didn't notice that I had to charge the iPod and it died on me so I was like what ever its normal and started to charge it. When it turned on, it got stuck on the Apple logo and its been there for more than a day now? What can I do? I know about the Press Home + Sleep button together but the Home button doesn't work at all anymore. I tried everything really. I tried to connect it to itunes and see if I could restore it but it won't recognize it no matter where I connect it. Tried it on 3 different computers and none worked at all. I can't take it to an Apple store since there isn't any close to where I live and I really don't have anyone to take me there. So is there any other solution to fix my problem at home? or is it messed up completely? Someone please help me

I have this same issue. But also, it isn't just that the lock/home button stops working, all buttons stop working. Even if you switch it to silent sounds are still played. I just got my iphone Thursday. Went to school the next day and pulled it out, it happened while it was locked I guess because my screen was black and I couldn't do anything! Thought it died already! This was around 12. Finally I pulled it out of my pocket again at around 3 and it showed the Apple logo and acted like it had just started back up. Which is what always happens after I get stuck playing a game or something. Help please, has happened two or three times just today.

Apple tv and home sharing using lots of data??

Just purchased apple tv and turned on home sharing to listen to songs in my iTunes library through my home theater. I am not streaming video or listening through iCloud. My satellite data usage went through the roof. About 350MB in alittle over an hour. I unplugged the apple tv and still had usage. About 50 MB the next hour. I turned off home sharing and the bleeding stopped. That type of continuous datat usage would consume my monthly data allowance in no time.
Without a solution I will have to return my apple tv. :( Please help. Thanks

Is some broadband use to be expected. I would not have thought so but perhaps I am wrong. Any help, insight or information would be greatly appreciated.
Thanks in advance

Apple TV and Home Sharing "An error occurred loading this content"

Recently I moved and switched my homeshare library from my Mac to a Window8 PC. I'm running the same network equipent, but the bandwidth to the internet was less in the new place then the old one so I wanted to store more on the PC. My bandwidth to the internet is slow at times so I like to download to my PC and watch the shows on my appletv. I thought it might be a Windows 8 issue, but I powered up my Mac Pro (2008) again and it has the same problem. I thought it might be a WIFI issue so I ran network wires, same issue. The only new thing I can think that happened was the apple tvs recently took a SW update, I'm not sure what version they had before. (tend not too look at versions when things are working).
What I know:
All the shows play fine when I stream. (they can just take a 5-10m to start due to internet bandwidth, but they play fine).
Some shows play fine with homesharing (I have found no common thread between ones that do and don't).
All shows play fine on my PC in iTunes
Between my 2 AppleTvs (both running version 6.1) It is consistent which shows will play in home sharing and which will not. There have been a couple shows that will play on one but not the other and a couple shows that won't play one day but will the next day.
I have tried playing a show that will not play over and over for 10m. The status remains the same.
If the show has an option to resume playing or start from beginning. I'll be asked "Resume/Start over" first then be told "An error occurred loading this content"
The first time I try and play a show it takes 5-10 seconds to give me an error, repeat attempts typically take < 1 second to show the error.
Most shows on both my AppleTVs with home sharing return an error "An error occurred loading this content". I've tried running network wires, rebooting, holding menu and shift down to reboot, pulling power. I have examined the files that play versus ones that do not and they all appear to be in good working order. As an example. Episode 1, Season 2 of Big bang theroy plays fine, but Eposodes 2-5 don't, but then Episodes 6-8 do play ok. I find the same problem with Movies and Music Videos.
Setup Facts:
Asus Wireless Router is connected to my DSL modem into the Ausus router WAN port. The ASUS router creates a network 192.168.1.X my DSL has a 192.168.0.1 IP address.
On the AppleTV it has a valid IP address and I'm fairly confident the network is ok since I have NO issues streaming any shows from the internet via Music, TV shows, Movies, Hulu, Netflicks, etc.
PC is running Windows 8 and I've disabled all power reduction settings to be always ON. (Again some shows play fine, the ones that play seem to always play). Running itunes version 11.1.5.5
All the shows are ones I've downloaded iTunes. None of the shows are handbraked home videos.
AppleTV version 6.1 for both AppleTVs.
What I've tried:
Power Clearing Devices
Switching locations of Apple TV with different TVs
Trying Mac Pro and Windows 8 Home Shares
WiFi and networked
Changing HDMI Cables.
Every TV I have, 1: Sony (new), 1 LG (about 2 yers old), 1 Samsung (about 5 years old).
Any Adivce?

I have it working now.. BUT I still don't have 100% on both appleTVs. I'd guess it's closer to 99% (which is a huge improvement).
What I've done since:
First I verified that I had open on my firewall the correct ports. I use AVG Internet security so verified I had it setup ok. (this was after I tried a few times with it off). (this produced no improvement)
TCP
direction both ways
local ports 3689
remove port(s): all
remote addresses:all
UDP
direction both ways
local ports 5353
remove port(s): all
remote addresses:all
Might have been over kill, but I assigned both AppleTVs a fixed IP 192.168.0.200 and 201. by their MAC address on my router. I then added them to the whitelist in AVG Internet Security
I saved changes and rebooted my PC, AppleTVs and PCs
It still didn't work. (I described the above because when I tried removing them no shows played, so more an FYI if 100% of your shows don't play).
I then downloaded itunes (11.5) same version I was running.
I used 7-zip (winrar should work too) to unzip the file iTunes64Setup.exe into a folder iTunes64Setup. This is important, which I'll explain in the next steps.
I then ran the iTunes64Setup.exe and selected repair.
it then told me it could not find iTunes64.msi. which I gave it the directory iTunes64Setup that I had expanded the iTunes64Setup.exe into that directory. (Really apple??? This one anoyed me that it was in the EXE but I had to manually expand it and put it somewhere for you to refind )
It completed the setup and I rebooted my PCs and AppleTVs again.
I went to a show that was consistently not playing and it worked on both TVs. I'd say 99% are working fine now. What's special about the remaining shows I do not know. If the file was corrupt I would not expect to be able to play it on another appletv.
The few files that don't play:
I'm now convienced that my network is fine. with 99% playing ok. If it was an intermitent problem with the network I'd expect that re-attempts to play the shows would produce different outcomes.
What have I tried:
I've done a factory reinstall of the appleTV. (my advise is don't waste you time, it did nothing except eat up 30m of my time watching redownload and then entering passwords).
I've tried deleting the shows that don't play (which do play on my computer) and redownloading them (same outcome) (again, my advice would be don't waste your time). When I did a check of the files they redownloaded identically with only the creation dates different.
Open to move things to try. Any ideas anyone?

HT1595 Help w/Apple TV2 and home network--going crazy!

This is maddening. i have Apple TV 2nd Gen and it CONSTANTLY does this: my network appears, shows strong signal, but it is not connected to internet. OVER and OVER again. Please help!
Other facts--we have a Bose Surround Sound system that has all compenents plugged into it. I can see my network when I hit network, but if I go to configure WiFi, it has to search, then shows mine (sometimes) and I have to select it, type in u/n and password, and then it says "cannot connect to server". meanwhile, my macbook, ipad, pc, etc are all happily connected to my WiFi. And again, back to network and it shows my home net with strong signal. This is the most irritating, irrational maddening process and I can't seem to figure it out!!!! Can't see movies, can't test network because can't connect to iTunes, can't even see my home sharing to show pictures from my macbook. ARGH.
I have tried restarting my Apple TV, restarting my wireless router, typing in my credentials, trying to run test network (since it shows it's connected but isn't), all to no avail. My partner wants me to pitch it out the window. I want to love it but it's making me crazy.
Can anyone help me??

Follow up: It appears to have been caused by the Bose system. We have multiple areas that can be controlled by the Bose console. Playing another area (outdoor speakers) via one source (satellite) was interfering with playing the Apple TV in the den on the television. Apparently.

Two apple TVs, 4 computers and home sharing

We have four computers that work well with our Apple TV and home sharing. Is it possible to have a second Apple TV operate on the same network and stream content to a second TV? I seem to recall there was a limit to the number of computers that could be a part of home sharing but I don't recall if there was a limit to Apple TVs
Thanks.

You can have up to 5 first gen models connected to each mac, the five limit counts but macs and Apple TVs have a five count each not between them.
I'm not really sure how many second gen models you can have but it's certainly more than one, I'd imagine at least five and likely more - because it's homeshare not an authorised device.

Solution for Apple TV 2, Xfinity router, Ethernet connection and Home Sharing

I have read over the past week the problems people have been having configuring their Apple TV and Home Sharing. I was experiencing the same issues as others....until tonight. I finally got it to work with an Ethernet connection. Previously, I was only able to get it to work via wifi and home sharing would drop after awhile.
1) Xfinity router settings. Like others I was suspicious if the Xfinity router was causing the issues because of the separation between wifi network and Ethernet network. It's not the router problem. I disabled the firewall. Enabled port forwarding. Gave a static IP address to the Apple TV. Added forwarding of ports
   123 TCP
    3689 UDP (all other support says this should be TCP but searched through and found a thread that suggested changing to UDP...this was the key)
    5353 UDP
    80 TCP
    443 TCP
    53 TCP
DMZ is off
Device discovery is disabled
Port triggering is disabled.
The wifi is setup and functional using DHCP. Lease time is 1 week.
RESET ROUTER AFTER ENTERING CONFIGURATION.
2) Mac computer. As of this posting the latest version of iTunes installed. Latest Safari version. All programs updated. Turned on Home Sharing. Turned off firewall. Gave Mac a static IP address. Set Mac for hard drive to never sleep. Set monitor to sleep after 15 minutes. Set date and time to automatically find based upon time zone. ( Apple TV needs to be set to the same time zone as computer and set to manual). Enabled file sharing amongst users on Mac.
3) Apple TV. Ethernet connection. Configured TCP/IP to static IP address I configured on router for the Apple TV. Turned on AirPlay. Set date and time to manual and set as the same time zone as the computer with iTunes. Turned on Home Sharing. Using latest version of Apple TV.
Once the router was reset ( not restored and not just resetting the wifi. A complete router reset), the Apple TV found my iTunes library. It's been running now for over an hour and no drop in the home sharing. Working beautifully. I will be testing in the next couple days allowing the Apple TV to sleep, turning the firewall on the router to a minimal setting to see if it changes anything.
Just tested the AirPlay from my iPad 2 to the Apple TV while the Apple TV is connected via ethernet connection and it works. At this point it appears that the setup is correct and complete with no errors.
As a side note, the Ethernet connection between my router and Mac is via commercial devices using the power outlets as the wiring.
Hope this helps many of you that were/ are struggling to get this to work like I was.

spma3,
Appreciate your further message. As you say "it's not fixed", but at least your solution appears to be a viable workaround!
My Cisco RVS4000 Router will permit me to forward ports for up to 15 applications. Of these, thirteen already have default entries added, although none of these are presently Enabled. For example, here's just 2 lines...
Application           HTTP        NTP
External Port          80           123
Internal Port           80            123
Protocol                TCP          UDP
IP Address            No entries at both
and the Enabled box for both is unchecked. In fact none of these 13 possibilities is Enabled.
To do what you are advising, I would need to...
1) Enable the above Port 123 entry, changing it from UDP-->TCP.
2) Add new entries for 3689 UDP & 5353 UDP... using the two free slots at the end of the table.
3) Select three of the default entries, and reconfigure them for 80 TCP; 443 TCP; 53 TCP, all as per your guidance. And Enable them.
Now, my present setup here has...
1) My PC is wired straight to Port 2 of the Router, and has a Static IP Address set.
My new ATV2 is hard-wired into the same subnet, albeit thru a series of switches, and again a Static IP is set. My understanding is that hard wiring an ATV automatically disables its WiFi.
3) My wife's iPad2 is set for DHCP, so it can pick up an IP Address when on the move. It connects into the LAN using one of two WAP4410N Wireless Access Points. Ch-1 & Ch-6, with same SSID and security stuff set up on both. The WAPs in turn are wired in, again with Static IPs set. So depending where she is in the property she can connect with excellent signal strength, reaching the ATV2 by WiFi+LAN.
On the Router DMZ is OFF, Port Range Triggering has no entries, nothing is Enabled, so is OFF. No idea about Device Discovery!
Home Sharing is ON for the PC, ATV2 and iPad2, with the same Apple ID/Password set for each. It does work, just not consistently as it should.
So to fully implement your idea, all I need to do is to enter these details. But I am unclear which IP Address I should put in at each new Single Port Forwarding entry field. Certainly not the iPad2, as its DHCP allocated value will change. Is it the ATV2 or the PC? Not sure, please clarify.
BTW, I have no plan to deactivate my AVG Firewall on this PC. It is happy to pass all traffic related to iTunes, so cannot see this as a factor. Time zone same on all equipment.
I tried with just 3689 UDP and 5353 UDP yesterday, and things were definitely better. I used 192.168.20.227, the IP Address for the ATV2.
Look forward to your answer.

How do I turn on photo sharing in itunes so I can see all my iphone photos on my ipad and home computer?

How do I turn on home sharing so I can see all my iphone photos on all my devices, ipad, apple TV, and home computer? I must have stopped home sharing when setting this up but would like to turn it on again.

You might have been using the iPad every day and this issue could have cropped up anyway. I have read where users state that they used their iPad the night before, plugged in to charge it over night and they had the connect to iTunes message on the iPad the next morning.
What I'm saying is that what happened to you can't be explained other than something went wrong. Brilliant I know, but how can anyone possibly know what happended for sure.
Without a computer - and I know that with iOS 5 an iPad can be PC free - it is my belief that you could be facing issues down the line because even with iCloud - if you get the connect to iTunes message - there is no way to correct the problem without a computer.
Even of you had been using the device every day, charging it every night and taking great pains to ensure that the iPad was well cared for, once the connect to iTunes message pops up - you still need a computer.
Unless I have been missing something for the last six months, iCloud can't bail anyone out of this scenario.

Airplay and home sharing does not work with my 2nd gen apple tv

though my 2nd gen apple tv with version 7 and my iphone 4s with ios 8.0.2 are connected to the same wifi network, airplay and home sharing doesnt show up in my itunes nor in my phone! what should i do?

Hello there, Ashwin.
The following Knowledge Base articles offers up some great steps for troubleshooting issues with both AirPlay and Home Sharing, respectively:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
http://support.apple.com/kb/ts4215
and
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My Ipad 1 doesn't charge even after 5 hours of charging. I tried pressing the power and home button to reset it (even tried toggling the mute button a few times), but It doesn't start up with the apple logo. Anyone has any ideas what else can I try

a have tried everyting now a dont have a clue what too do??

Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good. If your computer/iTunes does not recognize the iPad, then the cable is probably bad.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- %20beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
The Ultimate Guide to Solving iOS Battery Drain
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Poor battery life after installing iOS 7.1? Try these simple tips
http://www.zdnet.com/poor-battery-life-after-installing-ios-7-1-try-these-simple -tips-7000027348/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Charging Tip - Switching to airplane mode turns off battery-draining wireless and cellular access, allowing your iPhone/iPad to recharge up to twice as fast.
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How?

I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How? Should I just create new account? Don't want to lose 1500 songs.

Hey Frankgates!
I have an article here that can tell you how to do this:
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
Thanks for coming to the Apple Support Communities!
Regards,
Braden

HT3819 If I have to load the same apple id on all devices to use home share, does that preclude each device from using a second apple id and does that constitute a separate Itunes db or something?

If I have to load the same apple id on all devices to use home share, does that preclude each device from using a second apple id and does that constitute a separate Itunes db or something?

Welcome to the Apple community.
Only one of your libraries needs to use your iTunes Store Apple ID for home sharing. Your other computers can use their own ID for iTunes, so long as they use the same ID as all of the devices on the network for home sharing.

HT5796 I bought an Ipad from a friend's friend that was moving to his home country, and when I tried to set up the ipad it won't let me because it says it is linked to an apple ID and that I need to enter the same apple ID but i donn't know it, what do i

So I bought an ipad from a friend's friend that was leaving to his home country but the ipad is linked to his account and I can't reach him to ask for the information that the ipad is asking so I was wondering if there is a way that I can reset the ipad without me having to enter his apple id and password.

No, there is not.
That person will have to release the iPad from Find My iPad or you will not be able to use it.
This explains:
http://support.apple.com/kb/HT5818

Does home sharing allow my husband and I to share our itunes content? If so, how do we do that since it requires the use of the same Apple ID and password on each device to do so. His itunes is linked to his email and mine is linked to my email...

Does home sharing allow my husband and I to share our iTunes content? If so, how does this work? From what I've read to use home sharing the devices/computers all require the same Apple ID and password. My husbands iTunes is linked to his email/password and mine is my email/password. So if that's the case how to we go about sharing? God I hope that makes sense.

All apps are forever tied to the Apple ID that bought them. To stop your id from popping up, you need to delete the apps on his phone, and then repurchase them under his account.

Conecting Apple Tv and Home

Similar Messages

Maybe you are looking for